kingkevin
/
espressif_tinyusb
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

complete grouping imxrt boards

This commit is contained in:
hathach 2020-11-29 20:41:30 +07:00
parent 89205438c2
commit 2dec21f81b
36 changed files with 188 additions and 1175 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

17
hw/bsp/mimxrt1010_evk/board.h → hw/bsp/imxrt/boards/mimxrt1010_evk/board.h
View File

@ -33,4 +33,21 @@
// required since iMX RT10xx SDK include this file for board size
#define BOARD_FLASH_SIZE (0x1000000U)
// LED
#define LED_PINMUX IOMUXC_GPIO_11_GPIOMUX_IO11
#define LED_PORT GPIO1
#define LED_PIN 11
#define LED_STATE_ON 0
// SW8 button
#define BUTTON_PINMUX IOMUXC_GPIO_SD_05_GPIO2_IO05
#define BUTTON_PORT GPIO2
#define BUTTON_PIN 5
#define BUTTON_STATE_ACTIVE 0
// UART
#define UART_PORT LPUART1
#define UART_RX_PINMUX IOMUXC_GPIO_09_LPUART1_RXD
#define UART_TX_PINMUX IOMUXC_GPIO_10_LPUART1_TXD
#endif /* BOARD_H_ */

11
hw/bsp/imxrt/boards/mimxrt1010_evk/board.mk Normal file
View File

@ -0,0 +1,11 @@
CFLAGS += -DCPU_MIMXRT1011DAE5A
MCU_VARIANT = MIMXRT1011
# For flash-jlink target
JLINK_DEVICE = MIMXRT1011DAE5A
# For flash-pyocd target
PYOCD_TARGET = mimxrt1010
# flash using pyocd
flash: flash-pyocd

0
hw/bsp/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.c → hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.c
View File

0
hw/bsp/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h → hw/bsp/imxrt/boards/mimxrt1010_evk/evkmimxrt1010_flexspi_nor_config.h
View File

17
hw/bsp/mimxrt1015_evk/board.h → hw/bsp/imxrt/boards/mimxrt1015_evk/board.h
View File

@ -31,4 +31,21 @@
// required since iMX RT10xx SDK include this file for board size
#define BOARD_FLASH_SIZE (0x1000000U)
// LED
#define LED_PINMUX IOMUXC_GPIO_SD_B1_01_GPIO3_IO21
#define LED_PORT GPIO3
#define LED_PIN 21
#define LED_STATE_ON 0
// SW8 button
#define BUTTON_PINMUX IOMUXC_GPIO_EMC_09_GPIO2_IO09
#define BUTTON_PORT GPIO2
#define BUTTON_PIN 9
#define BUTTON_STATE_ACTIVE 0
// UART
#define UART_PORT LPUART1
#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_07_LPUART1_RX
#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_06_LPUART1_TX
#endif /* BOARD_H_ */

11
hw/bsp/imxrt/boards/mimxrt1015_evk/board.mk Normal file
View File

@ -0,0 +1,11 @@
CFLAGS += -DCPU_MIMXRT1015DAF5A
MCU_VARIANT = MIMXRT1015
# For flash-jlink target
JLINK_DEVICE = MIMXRT1015DAF5A
# For flash-pyocd target
PYOCD_TARGET = mimxrt1015
# flash using pyocd
flash: flash-pyocd

0
hw/bsp/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.c → hw/bsp/imxrt/boards/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.c
View File

0
hw/bsp/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.h → hw/bsp/imxrt/boards/mimxrt1015_evk/evkmimxrt1015_flexspi_nor_config.h
View File

17
hw/bsp/mimxrt1020_evk/board.h → hw/bsp/imxrt/boards/mimxrt1020_evk/board.h
View File

@ -31,4 +31,21 @@
// required since iMX RT10xx SDK include this file for board size
#define BOARD_FLASH_SIZE (0x800000U)
// LED
#define LED_PINMUX IOMUXC_GPIO_AD_B0_05_GPIO1_IO05
#define LED_PORT GPIO1
#define LED_PIN 5
#define LED_STATE_ON 0
// SW8 button
#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00
#define BUTTON_PORT GPIO5
#define BUTTON_PIN 0
#define BUTTON_STATE_ACTIVE 0
// UART
#define UART_PORT LPUART1
#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_07_LPUART1_RX
#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_06_LPUART1_TX
#endif /* BOARD_H_ */

11
hw/bsp/imxrt/boards/mimxrt1020_evk/board.mk Normal file
View File

@ -0,0 +1,11 @@
CFLAGS += -DCPU_MIMXRT1021DAG5A
MCU_VARIANT = MIMXRT1021
# For flash-jlink target
JLINK_DEVICE = MIMXRT1021DAG5A
# For flash-pyocd target
PYOCD_TARGET = mimxrt1020
# flash using pyocd
flash: flash-pyocd

0
hw/bsp/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.c → hw/bsp/imxrt/boards/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.c
View File

0
hw/bsp/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.h → hw/bsp/imxrt/boards/mimxrt1020_evk/evkmimxrt1020_flexspi_nor_config.h
View File

17
hw/bsp/mimxrt1050_evkb/board.h → hw/bsp/imxrt/boards/mimxrt1050_evkb/board.h
View File

@ -31,4 +31,21 @@
// required since iMX RT10xx SDK include this file for board size
#define BOARD_FLASH_SIZE (0x4000000U)
// LED
#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09
#define LED_PORT GPIO1
#define LED_PIN 9
#define LED_STATE_ON 0
// SW8 button
#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00
#define BUTTON_PORT GPIO5
#define BUTTON_PIN 0
#define BUTTON_STATE_ACTIVE 0
// UART
#define UART_PORT LPUART1
#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX
#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX
#endif /* BOARD_H_ */

8
hw/bsp/imxrt/boards/mimxrt1050_evkb/board.mk Normal file
View File

@ -0,0 +1,8 @@
CFLAGS += -DCPU_MIMXRT1052DVL6B
MCU_VARIANT = MIMXRT1052
# For flash-pyocd target
PYOCD_TARGET = mimxrt1050
# flash using pyocd
flash: flash-pyocd

0
hw/bsp/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.c → hw/bsp/imxrt/boards/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.c
View File

0
hw/bsp/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h → hw/bsp/imxrt/boards/mimxrt1050_evkb/evkbimxrt1050_flexspi_nor_config.h
View File

17
hw/bsp/mimxrt1060_evk/board.h → hw/bsp/imxrt/boards/mimxrt1060_evk/board.h
View File

@ -31,4 +31,21 @@
// required since iMX RT10xx SDK include this file for board size
#define BOARD_FLASH_SIZE (0x800000U)
// LED
#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09
#define LED_PORT GPIO1
#define LED_PIN 9
#define LED_STATE_ON 0
// SW8 button
#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00
#define BUTTON_PORT GPIO5
#define BUTTON_PIN 0
#define BUTTON_STATE_ACTIVE 0
// UART
#define UART_PORT LPUART1
#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX
#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX
#endif /* BOARD_H_ */

11
hw/bsp/imxrt/boards/mimxrt1060_evk/board.mk Normal file
View File

@ -0,0 +1,11 @@
CFLAGS += -DCPU_MIMXRT1062DVL6A
MCU_VARIANT = MIMXRT1062
# For flash-jlink target
JLINK_DEVICE = MIMXRT1062xxx6A
# For flash-pyocd target
PYOCD_TARGET = mimxrt1060
# flash using pyocd
flash: flash-pyocd

0
hw/bsp/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.c → hw/bsp/imxrt/boards/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.c
View File

0
hw/bsp/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.h → hw/bsp/imxrt/boards/mimxrt1060_evk/evkmimxrt1060_flexspi_nor_config.h
View File

18
hw/bsp/mimxrt1064_evk/board.h → hw/bsp/imxrt/boards/mimxrt1064_evk/board.h
View File

@ -31,4 +31,22 @@
// required since iMX RT10xx SDK include this file for board size
#define BOARD_FLASH_SIZE (0x400000U)
// LED
#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09
#define LED_PORT GPIO1
#define LED_PIN 9
#define LED_STATE_ON 0
// SW8 button
#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00
#define BUTTON_PORT GPIO5
#define BUTTON_PIN 0
#define BUTTON_STATE_ACTIVE 0
// UART
#define UART_PORT LPUART1
#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX
#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX
#endif /* BOARD_H_ */

11
hw/bsp/imxrt/boards/mimxrt1064_evk/board.mk Normal file
View File

@ -0,0 +1,11 @@
CFLAGS += -DCPU_MIMXRT1064DVL6A
MCU_VARIANT = MIMXRT1064
# For flash-jlink target
JLINK_DEVICE = MIMXRT1064xxx6A
# For flash-pyocd target
PYOCD_TARGET = mimxrt1064
# flash using pyocd
flash: flash-pyocd

0
hw/bsp/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.c → hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.c
View File

0
hw/bsp/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.h → hw/bsp/imxrt/boards/mimxrt1064_evk/evkmimxrt1064_flexspi_nor_config.h
View File

29
hw/bsp/mimxrt1060_evk/mimxrt1060_evk.c → hw/bsp/imxrt/family.c
View File

@ -24,7 +24,8 @@
* This file is part of the TinyUSB stack.
*/
#include "../board.h"
#include "bsp/board.h"
#include "board.h"
#include "fsl_device_registers.h"
#include "fsl_gpio.h"
#include "fsl_iomuxc.h"
@ -33,22 +34,6 @@
#include "clock_config.h"
#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09
#define LED_PORT GPIO1
#define LED_PIN 9
#define LED_STATE_ON 0
// SW8 button
#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00
#define BUTTON_PORT GPIO5
#define BUTTON_PIN 0
#define BUTTON_STATE_ACTIVE 0
// UART
#define UART_PORT LPUART1
#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX
#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX
// needed by fsl_flexspi_nor_boot
const uint8_t dcd_data[] = { 0x00 };
@ -79,6 +64,7 @@ void board_init(void)
// Button
IOMUXC_SetPinMux( BUTTON_PINMUX, 0U);
IOMUXC_SetPinConfig(BUTTON_PINMUX, 0x01B0A0U);
gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, };
GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config);
@ -100,7 +86,14 @@ void board_init(void)
CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U);
CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U);
USBPHY_Type* usb_phy = USBPHY1;
USBPHY_Type* usb_phy;
// RT105x RT106x have dual USB controller. TODO support USB2
#ifdef USBPHY1
usb_phy = USBPHY1;
#else
usb_phy = USBPHY;
#endif
// Enable PHY support for Low speed device + LS via FS Hub
usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK;

25
hw/bsp/mimxrt1015_evk/board.mk → hw/bsp/imxrt/family.mk
View File

@ -1,3 +1,5 @@
include $(TOP)/$(BOARD_PATH)/board.mk
CFLAGS += \
-mthumb \
-mabi=aapcs \
@ -5,7 +7,6 @@ CFLAGS += \
-mfloat-abi=hard \
-mfpu=fpv5-d16 \
-D__ARMVFP__=0 -D__ARMFPV5__=0\
-DCPU_MIMXRT1015DAF5A \
-DXIP_EXTERNAL_FLASH=1 \
-DXIP_BOOT_HEADER_ENABLE=1 \
-DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX
@ -13,13 +14,17 @@ CFLAGS += \
# mcu driver cause following warnings
CFLAGS += -Wno-error=unused-parameter -Wno-error=implicit-fallthrough=
MCU_DIR = hw/mcu/nxp/sdk/devices/MIMXRT1015
MCU_DIR = hw/mcu/nxp/sdk/devices/$(MCU_VARIANT)
# All source paths should be relative to the top level.
LD_FILE = $(MCU_DIR)/gcc/MIMXRT1015xxxxx_flexspi_nor.ld
LD_FILE = $(MCU_DIR)/gcc/$(MCU_VARIANT)xxxxx_flexspi_nor.ld
# TODO for net_lwip_webserver exmaple, but may not needed !!
LDFLAGS += \
-Wl,--defsym,__stack_size__=0x800 \
SRC_C += \
$(MCU_DIR)/system_MIMXRT1015.c \
$(MCU_DIR)/system_$(MCU_VARIANT).c \
$(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \
$(MCU_DIR)/project_template/clock_config.c \
$(MCU_DIR)/drivers/fsl_clock.c \
@ -28,13 +33,13 @@ SRC_C += \
$(MCU_DIR)/drivers/fsl_lpuart.c
INC += \
$(TOP)/hw/bsp/$(BOARD) \
$(TOP)/$(BOARD_PATH) \
$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
$(TOP)/$(MCU_DIR) \
$(TOP)/$(MCU_DIR)/drivers \
$(TOP)/$(MCU_DIR)/project_template \
SRC_S += $(MCU_DIR)/gcc/startup_MIMXRT1015.S
SRC_S += $(MCU_DIR)/gcc/startup_$(MCU_VARIANT).S
# For TinyUSB port source
VENDOR = nxp
@ -43,11 +48,3 @@ CHIP_FAMILY = transdimension
# For freeRTOS port source
FREERTOS_PORT = ARM_CM7/r0p1
# For flash-jlink target
JLINK_DEVICE = MIMXRT1015DAF5A
# For flash-pyocd target
PYOCD_TARGET = mimxrt1015
# flash using pyocd
flash: flash-pyocd

57
hw/bsp/mimxrt1010_evk/board.mk
View File

@ -1,57 +0,0 @@
CFLAGS += \
-mthumb \
-mabi=aapcs \
-mcpu=cortex-m7 \
-mfloat-abi=hard \
-mfpu=fpv5-d16 \
-D__ARMVFP__=0 -D__ARMFPV5__=0\
-DCPU_MIMXRT1011DAE5A \
-DXIP_EXTERNAL_FLASH=1 \
-DXIP_BOOT_HEADER_ENABLE=1 \
-DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX
# mcu driver cause following warnings
# CFLAGS += -Wno-error=unused-parameter -Wno-error=implicit-fallthrough=
CFLAGS += -Wno-error=unused-parameter
MCU_DIR = hw/mcu/nxp/sdk/devices/MIMXRT1011
# All source paths should be relative to the top level.
LD_FILE = $(MCU_DIR)/gcc/MIMXRT1011xxxxx_flexspi_nor.ld
LDFLAGS += \
-Wl,--defsym,__stack_size__=0x800 \
SRC_C += \
$(MCU_DIR)/system_MIMXRT1011.c \
$(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \
$(MCU_DIR)/project_template/clock_config.c \
$(MCU_DIR)/drivers/fsl_clock.c \
$(MCU_DIR)/drivers/fsl_gpio.c \
$(MCU_DIR)/drivers/fsl_common.c \
$(MCU_DIR)/drivers/fsl_lpuart.c
INC += \
$(TOP)/hw/bsp/$(BOARD) \
$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
$(TOP)/$(MCU_DIR) \
$(TOP)/$(MCU_DIR)/drivers \
$(TOP)/$(MCU_DIR)/project_template \
SRC_S += $(MCU_DIR)/gcc/startup_MIMXRT1011.S
# For TinyUSB port source
VENDOR = nxp
CHIP_FAMILY = transdimension
# For freeRTOS port source
FREERTOS_PORT = ARM_CM7/r0p1
# For flash-jlink target
JLINK_DEVICE = MIMXRT1011DAE5A
# For flash-pyocd target
PYOCD_TARGET = mimxrt1010
# flash using pyocd
flash: flash-pyocd

170
hw/bsp/mimxrt1010_evk/mimxrt1010_evk.c
View File

@ -1,170 +0,0 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2018, hathach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#include "../board.h"
#include "fsl_device_registers.h"
#include "fsl_gpio.h"
#include "fsl_iomuxc.h"
#include "fsl_clock.h"
#include "fsl_lpuart.h"
#include "clock_config.h"
#define LED_PINMUX IOMUXC_GPIO_11_GPIOMUX_IO11
#define LED_PORT GPIO1
#define LED_PIN 11
#define LED_STATE_ON 0
// SW8 button
#define BUTTON_PINMUX IOMUXC_GPIO_SD_05_GPIO2_IO05
#define BUTTON_PORT GPIO2
#define BUTTON_PIN 5
#define BUTTON_STATE_ACTIVE 0
// UART
#define UART_PORT LPUART1
#define UART_RX_PINMUX IOMUXC_GPIO_09_LPUART1_RXD
#define UART_TX_PINMUX IOMUXC_GPIO_10_LPUART1_TXD
const uint8_t dcd_data[] = { 0x00 };
void board_init(void)
{
// Init clock
BOARD_BootClockRUN();
SystemCoreClockUpdate();
// Enable IOCON clock
CLOCK_EnableClock(kCLOCK_Iomuxc);
#if CFG_TUSB_OS == OPT_OS_NONE
// 1ms tick timer
SysTick_Config(SystemCoreClock / 1000);
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
// NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
#endif
// LED
IOMUXC_SetPinMux( LED_PINMUX, 0U);
IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U);
gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode };
GPIO_PinInit(LED_PORT, LED_PIN, &led_config);
board_led_write(true);
// Button
IOMUXC_SetPinMux( BUTTON_PINMUX, 0U);
IOMUXC_SetPinConfig(BUTTON_PINMUX, 0x01B0A0U);
gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, };
GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config);
// UART
IOMUXC_SetPinMux( UART_TX_PINMUX, 0U);
IOMUXC_SetPinMux( UART_RX_PINMUX, 0U);
IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u);
IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u);
lpuart_config_t uart_config;
LPUART_GetDefaultConfig(&uart_config);
uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE;
uart_config.enableTx = true;
uart_config.enableRx = true;
LPUART_Init(UART_PORT, &uart_config, (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U));
//------------- USB0 -------------//
// Clock
CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U);
CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U);
USBPHY_Type* usb_phy = USBPHY;
// Enable PHY support for Low speed device + LS via FS Hub
usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK;
// Enable all power for normal operation
usb_phy->PWD = 0;
// TX Timing
uint32_t phytx = usb_phy->TX;
phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK);
phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06);
usb_phy->TX = phytx;
}
//--------------------------------------------------------------------+
// USB Interrupt Handler
//--------------------------------------------------------------------+
void USB_OTG1_IRQHandler(void)
{
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
tuh_int_handler(0);
#endif
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE
tud_int_handler(0);
#endif
}
//--------------------------------------------------------------------+
// Board porting API
//--------------------------------------------------------------------+
void board_led_write(bool state)
{
GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
}
uint32_t board_button_read(void)
{
// active low
return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN);
}
int board_uart_read(uint8_t* buf, int len)
{
LPUART_ReadBlocking(UART_PORT, buf, len);
return len;
}
int board_uart_write(void const * buf, int len)
{
LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len);
return len;
}
#if CFG_TUSB_OS == OPT_OS_NONE
volatile uint32_t system_ticks = 0;
void SysTick_Handler(void)
{
system_ticks++;
}
uint32_t board_millis(void)
{
return system_ticks;
}
#endif

170
hw/bsp/mimxrt1015_evk/mimxrt1015_evk.c
View File

@ -1,170 +0,0 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2018, hathach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#include "../board.h"
#include "fsl_device_registers.h"
#include "fsl_gpio.h"
#include "fsl_iomuxc.h"
#include "fsl_clock.h"
#include "fsl_lpuart.h"
#include "clock_config.h"
#define LED_PINMUX IOMUXC_GPIO_SD_B1_01_GPIO3_IO21
#define LED_PORT GPIO3
#define LED_PIN 21
#define LED_STATE_ON 0
// SW8 button
#define BUTTON_PINMUX IOMUXC_GPIO_EMC_09_GPIO2_IO09
#define BUTTON_PORT GPIO2
#define BUTTON_PIN 9
#define BUTTON_STATE_ACTIVE 0
// UART
#define UART_PORT LPUART1
#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_07_LPUART1_RX
#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_06_LPUART1_TX
const uint8_t dcd_data[] = { 0x00 };
void board_init(void)
{
// Init clock
BOARD_BootClockRUN();
SystemCoreClockUpdate();
// Enable IOCON clock
CLOCK_EnableClock(kCLOCK_Iomuxc);
#if CFG_TUSB_OS == OPT_OS_NONE
// 1ms tick timer
SysTick_Config(SystemCoreClock / 1000);
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
// NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
#endif
// LED
IOMUXC_SetPinMux( LED_PINMUX, 0U);
IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U);
gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode };
GPIO_PinInit(LED_PORT, LED_PIN, &led_config);
board_led_write(true);
// Button
IOMUXC_SetPinMux( BUTTON_PINMUX, 0U);
IOMUXC_SetPinConfig(BUTTON_PINMUX, 0x01B0A0U);
gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, };
GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config);
// UART
IOMUXC_SetPinMux( UART_TX_PINMUX, 0U);
IOMUXC_SetPinMux( UART_RX_PINMUX, 0U);
IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u);
IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u);
lpuart_config_t uart_config;
LPUART_GetDefaultConfig(&uart_config);
uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE;
uart_config.enableTx = true;
uart_config.enableRx = true;
LPUART_Init(UART_PORT, &uart_config, (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U));
//------------- USB0 -------------//
// Clock
CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U);
CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U);
USBPHY_Type* usb_phy = USBPHY;
// Enable PHY support for Low speed device + LS via FS Hub
usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK;
// Enable all power for normal operation
usb_phy->PWD = 0;
// TX Timing
uint32_t phytx = usb_phy->TX;
phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK);
phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06);
usb_phy->TX = phytx;
}
//--------------------------------------------------------------------+
// USB Interrupt Handler
//--------------------------------------------------------------------+
void USB_OTG1_IRQHandler(void)
{
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
tuh_int_handler(0);
#endif
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE
tud_int_handler(0);
#endif
}
//--------------------------------------------------------------------+
// Board porting API
//--------------------------------------------------------------------+
void board_led_write(bool state)
{
GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
}
uint32_t board_button_read(void)
{
// active low
return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN);
}
int board_uart_read(uint8_t* buf, int len)
{
LPUART_ReadBlocking(UART_PORT, buf, len);
return len;
}
int board_uart_write(void const * buf, int len)
{
LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len);
return len;
}
#if CFG_TUSB_OS == OPT_OS_NONE
volatile uint32_t system_ticks = 0;
void SysTick_Handler(void)
{
system_ticks++;
}
uint32_t board_millis(void)
{
return system_ticks;
}
#endif

53
hw/bsp/mimxrt1020_evk/board.mk
View File

@ -1,53 +0,0 @@
CFLAGS += \
-mthumb \
-mabi=aapcs \
-mcpu=cortex-m7 \
-mfloat-abi=hard \
-mfpu=fpv5-d16 \
-D__ARMVFP__=0 -D__ARMFPV5__=0\
-DCPU_MIMXRT1021DAG5A \
-DXIP_EXTERNAL_FLASH=1 \
-DXIP_BOOT_HEADER_ENABLE=1 \
-DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX
# mcu driver cause following warnings
CFLAGS += -Wno-error=unused-parameter
MCU_DIR = hw/mcu/nxp/sdk/devices/MIMXRT1021
# All source paths should be relative to the top level.
LD_FILE = $(MCU_DIR)/gcc/MIMXRT1021xxxxx_flexspi_nor.ld
SRC_C += \
$(MCU_DIR)/system_MIMXRT1021.c \
$(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \
$(MCU_DIR)/project_template/clock_config.c \
$(MCU_DIR)/drivers/fsl_clock.c \
$(MCU_DIR)/drivers/fsl_gpio.c \
$(MCU_DIR)/drivers/fsl_common.c \
$(MCU_DIR)/drivers/fsl_lpuart.c
INC += \
$(TOP)/hw/bsp/$(BOARD) \
$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
$(TOP)/$(MCU_DIR) \
$(TOP)/$(MCU_DIR)/drivers \
$(TOP)/$(MCU_DIR)/project_template \
SRC_S += $(MCU_DIR)/gcc/startup_MIMXRT1021.S
# For TinyUSB port source
VENDOR = nxp
CHIP_FAMILY = transdimension
# For freeRTOS port source
FREERTOS_PORT = ARM_CM7/r0p1
# For flash-jlink target
JLINK_DEVICE = MIMXRT1021DAG5A
# For flash-pyocd target
PYOCD_TARGET = mimxrt1020
# flash using pyocd
flash: flash-pyocd

169
hw/bsp/mimxrt1020_evk/mimxrt1020_evk.c
View File

@ -1,169 +0,0 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2018, hathach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#include "../board.h"
#include "fsl_device_registers.h"
#include "fsl_gpio.h"
#include "fsl_iomuxc.h"
#include "fsl_clock.h"
#include "fsl_lpuart.h"
#include "clock_config.h"
#define LED_PINMUX IOMUXC_GPIO_AD_B0_05_GPIO1_IO05
#define LED_PORT GPIO1
#define LED_PIN 5
#define LED_STATE_ON 0
// SW8 button
#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00
#define BUTTON_PORT GPIO5
#define BUTTON_PIN 0
#define BUTTON_STATE_ACTIVE 0
// UART
#define UART_PORT LPUART1
#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_07_LPUART1_RX
#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_06_LPUART1_TX
const uint8_t dcd_data[] = { 0x00 };
void board_init(void)
{
// Init clock
BOARD_BootClockRUN();
SystemCoreClockUpdate();
// Enable IOCON clock
CLOCK_EnableClock(kCLOCK_Iomuxc);
#if CFG_TUSB_OS == OPT_OS_NONE
// 1ms tick timer
SysTick_Config(SystemCoreClock / 1000);
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
// NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
#endif
// LED
IOMUXC_SetPinMux( LED_PINMUX, 0U);
IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U);
gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode };
GPIO_PinInit(LED_PORT, LED_PIN, &led_config);
board_led_write(true);
// Button
IOMUXC_SetPinMux( BUTTON_PINMUX, 0U);
gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, };
GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config);
// UART
IOMUXC_SetPinMux( UART_TX_PINMUX, 0U);
IOMUXC_SetPinMux( UART_RX_PINMUX, 0U);
IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u);
IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u);
lpuart_config_t uart_config;
LPUART_GetDefaultConfig(&uart_config);
uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE;
uart_config.enableTx = true;
uart_config.enableRx = true;
LPUART_Init(UART_PORT, &uart_config, (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U));
//------------- USB0 -------------//
// Clock
CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U);
CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U);
USBPHY_Type* usb_phy = USBPHY;
// Enable PHY support for Low speed device + LS via FS Hub
usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK;
// Enable all power for normal operation
usb_phy->PWD = 0;
// TX Timing
uint32_t phytx = usb_phy->TX;
phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK);
phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06);
usb_phy->TX = phytx;
}
//--------------------------------------------------------------------+
// USB Interrupt Handler
//--------------------------------------------------------------------+
void USB_OTG1_IRQHandler(void)
{
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
tuh_int_handler(0);
#endif
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE
tud_int_handler(0);
#endif
}
//--------------------------------------------------------------------+
// Board porting API
//--------------------------------------------------------------------+
void board_led_write(bool state)
{
GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
}
uint32_t board_button_read(void)
{
// active low
return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN);
}
int board_uart_read(uint8_t* buf, int len)
{
LPUART_ReadBlocking(UART_PORT, buf, len);
return len;
}
int board_uart_write(void const * buf, int len)
{
LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len);
return len;
}
#if CFG_TUSB_OS == OPT_OS_NONE
volatile uint32_t system_ticks = 0;
void SysTick_Handler(void)
{
system_ticks++;
}
uint32_t board_millis(void)
{
return system_ticks;
}
#endif

50
hw/bsp/mimxrt1050_evkb/board.mk
View File

@ -1,50 +0,0 @@
CFLAGS += \
-mthumb \
-mabi=aapcs \
-mcpu=cortex-m7 \
-mfloat-abi=hard \
-mfpu=fpv5-d16 \
-D__ARMVFP__=0 -D__ARMFPV5__=0\
-DCPU_MIMXRT1052DVL6B \
-DXIP_EXTERNAL_FLASH=1 \
-DXIP_BOOT_HEADER_ENABLE=1 \
-DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX
# mcu driver cause following warnings
CFLAGS += -Wno-error=unused-parameter
MCU_DIR = hw/mcu/nxp/sdk/devices/MIMXRT1052
# All source paths should be relative to the top level.
LD_FILE = $(MCU_DIR)/gcc/MIMXRT1052xxxxx_flexspi_nor.ld
SRC_C += \
$(MCU_DIR)/system_MIMXRT1052.c \
$(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \
$(MCU_DIR)/project_template/clock_config.c \
$(MCU_DIR)/drivers/fsl_clock.c \
$(MCU_DIR)/drivers/fsl_gpio.c \
$(MCU_DIR)/drivers/fsl_common.c \
$(MCU_DIR)/drivers/fsl_lpuart.c
INC += \
$(TOP)/hw/bsp/$(BOARD) \
$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
$(TOP)/$(MCU_DIR) \
$(TOP)/$(MCU_DIR)/drivers \
$(TOP)/$(MCU_DIR)/project_template \
SRC_S += $(MCU_DIR)/gcc/startup_MIMXRT1052.S
# For TinyUSB port source
VENDOR = nxp
CHIP_FAMILY = transdimension
# For freeRTOS port source
FREERTOS_PORT = ARM_CM7/r0p1
# For flash-pyocd target
PYOCD_TARGET = mimxrt1050
# flash using pyocd
flash: flash-pyocd

184
hw/bsp/mimxrt1050_evkb/mimxrt1050_evkb.c
View File

@ -1,184 +0,0 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2018, hathach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#include "../board.h"
#include "fsl_device_registers.h"
#include "fsl_gpio.h"
#include "fsl_iomuxc.h"
#include "fsl_clock.h"
#include "fsl_lpuart.h"
#include "clock_config.h"
#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09
#define LED_PORT GPIO1
#define LED_PIN 9
#define LED_STATE_ON 0
// SW8 button
#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00
#define BUTTON_PORT GPIO5
#define BUTTON_PIN 0
#define BUTTON_STATE_ACTIVE 0
// UART
#define UART_PORT LPUART1
#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX
#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX
const uint8_t dcd_data[] = { 0x00 };
void board_init(void)
{
// Init clock
BOARD_BootClockRUN();
SystemCoreClockUpdate();
// Enable IOCON clock
CLOCK_EnableClock(kCLOCK_Iomuxc);
#if CFG_TUSB_OS == OPT_OS_NONE
// 1ms tick timer
SysTick_Config(SystemCoreClock / 1000);
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
// NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
#endif
// LED
IOMUXC_SetPinMux( LED_PINMUX, 0U);
IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U);
gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode };
GPIO_PinInit(LED_PORT, LED_PIN, &led_config);
board_led_write(true);
// Button
IOMUXC_SetPinMux( BUTTON_PINMUX, 0U);
gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, };
GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config);
// UART
IOMUXC_SetPinMux( UART_TX_PINMUX, 0U);
IOMUXC_SetPinMux( UART_RX_PINMUX, 0U);
IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u);
IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u);
lpuart_config_t uart_config;
LPUART_GetDefaultConfig(&uart_config);
uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE;
uart_config.enableTx = true;
uart_config.enableRx = true;
LPUART_Init(UART_PORT, &uart_config, (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U));
//------------- USB0 -------------//
// Clock
CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U);
CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U);
USBPHY_Type* usb_phy = USBPHY1;
// Enable PHY support for Low speed device + LS via FS Hub
usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK;
// Enable all power for normal operation
usb_phy->PWD = 0;
// TX Timing
uint32_t phytx = usb_phy->TX;
phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK);
phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06);
usb_phy->TX = phytx;
// USB1
// CLOCK_EnableUsbhs1PhyPllClock(kCLOCK_Usbphy480M, 480000000U);
// CLOCK_EnableUsbhs1Clock(kCLOCK_Usb480M, 480000000U);
}
//--------------------------------------------------------------------+
// USB Interrupt Handler
//--------------------------------------------------------------------+
void USB_OTG1_IRQHandler(void)
{
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
tuh_int_handler(0);
#endif
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE
tud_int_handler(0);
#endif
}
void USB_OTG2_IRQHandler(void)
{
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST
tuh_int_handler(1);
#endif
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE
tud_int_handler(1);
#endif
}
//--------------------------------------------------------------------+
// Board porting API
//--------------------------------------------------------------------+
void board_led_write(bool state)
{
GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
}
uint32_t board_button_read(void)
{
// active low
return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN);
}
int board_uart_read(uint8_t* buf, int len)
{
LPUART_ReadBlocking(UART_PORT, buf, len);
return len;
}
int board_uart_write(void const * buf, int len)
{
LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len);
return len;
}
#if CFG_TUSB_OS == OPT_OS_NONE
volatile uint32_t system_ticks = 0;
void SysTick_Handler(void)
{
system_ticks++;
}
uint32_t board_millis(void)
{
return system_ticks;
}
#endif

53
hw/bsp/mimxrt1060_evk/board.mk
View File

@ -1,53 +0,0 @@
CFLAGS += \
-mthumb \
-mabi=aapcs \
-mcpu=cortex-m7 \
-mfloat-abi=hard \
-mfpu=fpv5-d16 \
-D__ARMVFP__=0 -D__ARMFPV5__=0\
-DCPU_MIMXRT1062DVL6A \
-DXIP_EXTERNAL_FLASH=1 \
-DXIP_BOOT_HEADER_ENABLE=1 \
-DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX
# mcu driver cause following warnings
CFLAGS += -Wno-error=unused-parameter
MCU_DIR = hw/mcu/nxp/sdk/devices/MIMXRT1062
# All source paths should be relative to the top level.
LD_FILE = $(MCU_DIR)/gcc/MIMXRT1062xxxxx_flexspi_nor.ld
SRC_C += \
$(MCU_DIR)/system_MIMXRT1062.c \
$(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \
$(MCU_DIR)/project_template/clock_config.c \
$(MCU_DIR)/drivers/fsl_clock.c \
$(MCU_DIR)/drivers/fsl_gpio.c \
$(MCU_DIR)/drivers/fsl_common.c \
$(MCU_DIR)/drivers/fsl_lpuart.c
INC += \
$(TOP)/hw/bsp/$(BOARD) \
$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
$(TOP)/$(MCU_DIR) \
$(TOP)/$(MCU_DIR)/drivers \
$(TOP)/$(MCU_DIR)/project_template \
SRC_S += $(MCU_DIR)/gcc/startup_MIMXRT1062.S
# For TinyUSB port source
VENDOR = nxp
CHIP_FAMILY = transdimension
# For freeRTOS port source
FREERTOS_PORT = ARM_CM7/r0p1
# For flash-jlink target
JLINK_DEVICE = MIMXRT1062xxx6A
# For flash-pyocd target
PYOCD_TARGET = mimxrt1060
# flash using pyocd
flash: flash-pyocd

53
hw/bsp/mimxrt1064_evk/board.mk
View File

@ -1,53 +0,0 @@
CFLAGS += \
-mthumb \
-mabi=aapcs \
-mcpu=cortex-m7 \
-mfloat-abi=hard \
-mfpu=fpv5-d16 \
-D__ARMVFP__=0 -D__ARMFPV5__=0\
-DCPU_MIMXRT1064DVL6A \
-DXIP_EXTERNAL_FLASH=1 \
-DXIP_BOOT_HEADER_ENABLE=1 \
-DCFG_TUSB_MCU=OPT_MCU_MIMXRT10XX
# mcu driver cause following warnings
CFLAGS += -Wno-error=unused-parameter
MCU_DIR = hw/mcu/nxp/sdk/devices/MIMXRT1064
# All source paths should be relative to the top level.
LD_FILE = $(MCU_DIR)/gcc/MIMXRT1064xxxxx_flexspi_nor.ld
SRC_C += \
$(MCU_DIR)/system_MIMXRT1064.c \
$(MCU_DIR)/xip/fsl_flexspi_nor_boot.c \
$(MCU_DIR)/project_template/clock_config.c \
$(MCU_DIR)/drivers/fsl_clock.c \
$(MCU_DIR)/drivers/fsl_gpio.c \
$(MCU_DIR)/drivers/fsl_common.c \
$(MCU_DIR)/drivers/fsl_lpuart.c
INC += \
$(TOP)/hw/bsp/$(BOARD) \
$(TOP)/$(MCU_DIR)/../../CMSIS/Include \
$(TOP)/$(MCU_DIR) \
$(TOP)/$(MCU_DIR)/drivers \
$(TOP)/$(MCU_DIR)/project_template \
SRC_S += $(MCU_DIR)/gcc/startup_MIMXRT1064.S
# For TinyUSB port source
VENDOR = nxp
CHIP_FAMILY = transdimension
# For freeRTOS port source
FREERTOS_PORT = ARM_CM7/r0p1
# For flash-jlink target
JLINK_DEVICE = MIMXRT1064xxx6A
# For flash-pyocd target
PYOCD_TARGET = mimxrt1064
# flash using pyocd
flash: flash-pyocd

184
hw/bsp/mimxrt1064_evk/mimxrt1064_evk.c
View File

@ -1,184 +0,0 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2018, hathach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#include "../board.h"
#include "fsl_device_registers.h"
#include "fsl_gpio.h"
#include "fsl_iomuxc.h"
#include "fsl_clock.h"
#include "fsl_lpuart.h"
#include "clock_config.h"
#define LED_PINMUX IOMUXC_GPIO_AD_B0_09_GPIO1_IO09
#define LED_PORT GPIO1
#define LED_PIN 9
#define LED_STATE_ON 0
// SW8 button
#define BUTTON_PINMUX IOMUXC_SNVS_WAKEUP_GPIO5_IO00
#define BUTTON_PORT GPIO5
#define BUTTON_PIN 0
#define BUTTON_STATE_ACTIVE 0
// UART
#define UART_PORT LPUART1
#define UART_RX_PINMUX IOMUXC_GPIO_AD_B0_13_LPUART1_RX
#define UART_TX_PINMUX IOMUXC_GPIO_AD_B0_12_LPUART1_TX
const uint8_t dcd_data[] = { 0x00 };
void board_init(void)
{
// Init clock
BOARD_BootClockRUN();
SystemCoreClockUpdate();
// Enable IOCON clock
CLOCK_EnableClock(kCLOCK_Iomuxc);
#if CFG_TUSB_OS == OPT_OS_NONE
// 1ms tick timer
SysTick_Config(SystemCoreClock / 1000);
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
// NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
#endif
// LED
IOMUXC_SetPinMux( LED_PINMUX, 0U);
IOMUXC_SetPinConfig( LED_PINMUX, 0x10B0U);
gpio_pin_config_t led_config = { kGPIO_DigitalOutput, 0, kGPIO_NoIntmode };
GPIO_PinInit(LED_PORT, LED_PIN, &led_config);
board_led_write(true);
// Button
IOMUXC_SetPinMux( BUTTON_PINMUX, 0U);
gpio_pin_config_t button_config = { kGPIO_DigitalInput, 0, kGPIO_IntRisingEdge, };
GPIO_PinInit(BUTTON_PORT, BUTTON_PIN, &button_config);
// UART
IOMUXC_SetPinMux( UART_TX_PINMUX, 0U);
IOMUXC_SetPinMux( UART_RX_PINMUX, 0U);
IOMUXC_SetPinConfig( UART_TX_PINMUX, 0x10B0u);
IOMUXC_SetPinConfig( UART_RX_PINMUX, 0x10B0u);
lpuart_config_t uart_config;
LPUART_GetDefaultConfig(&uart_config);
uart_config.baudRate_Bps = CFG_BOARD_UART_BAUDRATE;
uart_config.enableTx = true;
uart_config.enableRx = true;
LPUART_Init(UART_PORT, &uart_config, (CLOCK_GetPllFreq(kCLOCK_PllUsb1) / 6U) / (CLOCK_GetDiv(kCLOCK_UartDiv) + 1U));
//------------- USB0 -------------//
// Clock
CLOCK_EnableUsbhs0PhyPllClock(kCLOCK_Usbphy480M, 480000000U);
CLOCK_EnableUsbhs0Clock(kCLOCK_Usb480M, 480000000U);
USBPHY_Type* usb_phy = USBPHY1;
// Enable PHY support for Low speed device + LS via FS Hub
usb_phy->CTRL |= USBPHY_CTRL_SET_ENUTMILEVEL2_MASK | USBPHY_CTRL_SET_ENUTMILEVEL3_MASK;
// Enable all power for normal operation
usb_phy->PWD = 0;
// TX Timing
uint32_t phytx = usb_phy->TX;
phytx &= ~(USBPHY_TX_D_CAL_MASK | USBPHY_TX_TXCAL45DM_MASK | USBPHY_TX_TXCAL45DP_MASK);
phytx |= USBPHY_TX_D_CAL(0x0C) | USBPHY_TX_TXCAL45DP(0x06) | USBPHY_TX_TXCAL45DM(0x06);
usb_phy->TX = phytx;
// USB1
// CLOCK_EnableUsbhs1PhyPllClock(kCLOCK_Usbphy480M, 480000000U);
// CLOCK_EnableUsbhs1Clock(kCLOCK_Usb480M, 480000000U);
}
//--------------------------------------------------------------------+
// USB Interrupt Handler
//--------------------------------------------------------------------+
void USB_OTG1_IRQHandler(void)
{
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_HOST
tuh_int_handler(0);
#endif
#if CFG_TUSB_RHPORT0_MODE & OPT_MODE_DEVICE
tud_int_handler(0);
#endif
}
void USB_OTG2_IRQHandler(void)
{
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_HOST
tuh_int_handler(1);
#endif
#if CFG_TUSB_RHPORT1_MODE & OPT_MODE_DEVICE
tud_int_handler(1);
#endif
}
//--------------------------------------------------------------------+
// Board porting API
//--------------------------------------------------------------------+
void board_led_write(bool state)
{
GPIO_PinWrite(LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
}
uint32_t board_button_read(void)
{
// active low
return BUTTON_STATE_ACTIVE == GPIO_PinRead(BUTTON_PORT, BUTTON_PIN);
}
int board_uart_read(uint8_t* buf, int len)
{
LPUART_ReadBlocking(UART_PORT, buf, len);
return len;
}
int board_uart_write(void const * buf, int len)
{
LPUART_WriteBlocking(UART_PORT, (uint8_t*)buf, len);
return len;
}
#if CFG_TUSB_OS == OPT_OS_NONE
volatile uint32_t system_ticks = 0;
void SysTick_Handler(void)
{
system_ticks++;
}
uint32_t board_millis(void)
{
return system_ticks;
}
#endif