kingkevin
/
espressif_tinyusb
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
espressif_tinyusb/hw/bsp/stm32f7/family.mk

55 lines
1.5 KiB
Makefile
Raw Normal View History

add copy-artifact target, and add uf2 for all family board
2021-01-26 15:19:14 +01:00
UF2_FAMILY_ID = 0x53b80f00
clean up
2021-03-03 14:25:44 +01:00
ST_FAMILY = f7
add example specific DEPS_SUBMODULES
2021-03-18 10:28:44 +01:00
DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
clean up
2021-03-03 14:25:44 +01:00
ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
add copy-artifact target, and add uf2 for all family board
2021-01-26 15:19:14 +01:00
adding stm32f7 family
2021-01-13 07:20:09 +01:00
include $(TOP)/$(BOARD_PATH)/board.mk
Add Stm32F7xxdisco board support files Status with examples/device/cdc_msc: - make BOARD=stm32f723disco => OK - make BOARD=stm32f723disco PORT=1 => No Reaction - make BOARD=stm32f746disco => OK - make BOARD=stm32f746disco PORT=1 => Hangs during enumeration - make BOARD=stm32f769disco => Hangs during enumeration
2020-06-21 20:53:52 +02:00
CFLAGS += \
-flto \
-mthumb \
-mabi=aapcs \
-mcpu=cortex-m7 \
-mfloat-abi=hard \
-mfpu=fpv5-d16 \
-nostdlib -nostartfiles \
-DCFG_TUSB_MCU=OPT_MCU_STM32F7 \
rename board specific macro for example - BOARD_DEVICE/HOST_RHPORT_NUM to BOARD_TUD/H_RHPORT - BOARD_DEVICE/HOST_RHPORT_SPEED to BOARD_TUD/H_MAX_SPEED
2022-06-01 18:53:40 +02:00
-DBOARD_TUD_RHPORT=$(PORT)
Add Stm32F7xxdisco board support files Status with examples/device/cdc_msc: - make BOARD=stm32f723disco => OK - make BOARD=stm32f723disco PORT=1 => No Reaction - make BOARD=stm32f746disco => OK - make BOARD=stm32f746disco PORT=1 => Hangs during enumeration - make BOARD=stm32f769disco => Hangs during enumeration
2020-06-21 20:53:52 +02:00
ifeq ($(PORT), 1)
change REDUCE_SPEED=0/1 to explicitly SPEED=high/full update readme, boards.md to add link to new stm boards
2020-07-08 11:29:48 +02:00
ifeq ($(SPEED), high)
rename board specific macro for example - BOARD_DEVICE/HOST_RHPORT_NUM to BOARD_TUD/H_RHPORT - BOARD_DEVICE/HOST_RHPORT_SPEED to BOARD_TUD/H_MAX_SPEED
2022-06-01 18:53:40 +02:00
CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_HIGH_SPEED
change REDUCE_SPEED=0/1 to explicitly SPEED=high/full update readme, boards.md to add link to new stm boards
2020-07-08 11:29:48 +02:00
$(info "Using OTG_HS in HighSpeed mode")
else
rename board specific macro for example - BOARD_DEVICE/HOST_RHPORT_NUM to BOARD_TUD/H_RHPORT - BOARD_DEVICE/HOST_RHPORT_SPEED to BOARD_TUD/H_MAX_SPEED
2022-06-01 18:53:40 +02:00
CFLAGS += -DBOARD_TUD_MAX_SPEED=OPT_MODE_FULL_SPEED
change REDUCE_SPEED=0/1 to explicitly SPEED=high/full update readme, boards.md to add link to new stm boards
2020-07-08 11:29:48 +02:00
$(info "Using OTG_HS in FullSpeed mode")
endif
Add Stm32F7xxdisco board support files Status with examples/device/cdc_msc: - make BOARD=stm32f723disco => OK - make BOARD=stm32f723disco PORT=1 => No Reaction - make BOARD=stm32f746disco => OK - make BOARD=stm32f746disco PORT=1 => Hangs during enumeration - make BOARD=stm32f769disco => Hangs during enumeration
2020-06-21 20:53:52 +02:00
else
change REDUCE_SPEED=0/1 to explicitly SPEED=high/full update readme, boards.md to add link to new stm boards
2020-07-08 11:29:48 +02:00
$(info "Using OTG_FS")
Add Stm32F7xxdisco board support files Status with examples/device/cdc_msc: - make BOARD=stm32f723disco => OK - make BOARD=stm32f723disco PORT=1 => No Reaction - make BOARD=stm32f746disco => OK - make BOARD=stm32f746disco PORT=1 => Hangs during enumeration - make BOARD=stm32f769disco => Hangs during enumeration
2020-06-21 20:53:52 +02:00
endif
# mcu driver cause following warnings
CFLAGS += -Wno-error=shadow -Wno-error=cast-align
SRC_C += \
support bcm2711 on pi4, enhance dcd init with utmi and ulpi hs phy
2021-10-28 07:52:18 +02:00
src/portable/synopsys/dwc2/dcd_dwc2.c \
f7 use offical st driver repo
2020-10-30 07:18:56 +01:00
$(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal.c \
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_cortex.c \
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc.c \
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c \
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_uart.c \
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_pwr_ex.c
Add Stm32F7xxdisco board support files Status with examples/device/cdc_msc: - make BOARD=stm32f723disco => OK - make BOARD=stm32f723disco PORT=1 => No Reaction - make BOARD=stm32f746disco => OK - make BOARD=stm32f746disco PORT=1 => Hangs during enumeration - make BOARD=stm32f769disco => Hangs during enumeration
2020-06-21 20:53:52 +02:00
INC += \
adding stm32f7 family
2021-01-13 07:20:09 +01:00
$(TOP)/$(BOARD_PATH) \
use cmsis 5 for all stm32
2020-10-30 08:14:28 +01:00
$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
Add Stm32F7xxdisco board support files Status with examples/device/cdc_msc: - make BOARD=stm32f723disco => OK - make BOARD=stm32f723disco PORT=1 => No Reaction - make BOARD=stm32f746disco => OK - make BOARD=stm32f746disco PORT=1 => Hangs during enumeration - make BOARD=stm32f769disco => Hangs during enumeration
2020-06-21 20:53:52 +02:00
$(TOP)/$(ST_CMSIS)/Include \
group h743eval and h743nucleo into stm32h7 tested and work well
2021-03-03 14:07:17 +01:00
$(TOP)/$(ST_HAL_DRIVER)/Inc
Add Stm32F7xxdisco board support files Status with examples/device/cdc_msc: - make BOARD=stm32f723disco => OK - make BOARD=stm32f723disco PORT=1 => No Reaction - make BOARD=stm32f746disco => OK - make BOARD=stm32f746disco PORT=1 => Hangs during enumeration - make BOARD=stm32f769disco => Hangs during enumeration
2020-06-21 20:53:52 +02:00
# For freeRTOS port source
FREERTOS_PORT = ARM_CM7/r0p1