2013-09-16 11:38:46 +02:00
|
|
|
/**********************************************************************
|
|
|
|
* $Id$ lpc_phy_lan8720.c 2011-11-20
|
|
|
|
*//**
|
|
|
|
* @file lpc_phy_lan8720.c
|
|
|
|
* @brief LAN8720 PHY status and control.
|
|
|
|
* @version 1.0
|
|
|
|
* @date 20 Nov. 2011
|
|
|
|
* @author NXP MCU SW Application Team
|
|
|
|
*
|
|
|
|
* Copyright(C) 2011, NXP Semiconductor
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
***********************************************************************
|
|
|
|
* Software that is described herein is for illustrative purposes only
|
|
|
|
* which provides customers with programming information regarding the
|
|
|
|
* products. This software is supplied "AS IS" without any warranties.
|
|
|
|
* NXP Semiconductors assumes no responsibility or liability for the
|
|
|
|
* use of the software, conveys no license or title under any patent,
|
|
|
|
* copyright, or mask work right to the product. NXP Semiconductors
|
|
|
|
* reserves the right to make changes in the software without
|
|
|
|
* notification. NXP Semiconductors also make no representation or
|
|
|
|
* warranty that such application will be suitable for the specified
|
|
|
|
* use without further testing or modification.
|
|
|
|
**********************************************************************/
|
|
|
|
|
|
|
|
#include "lwip/opt.h"
|
|
|
|
#include "lwip/err.h"
|
|
|
|
#include "lwip/tcpip.h"
|
|
|
|
#include "lwip/snmp.h"
|
|
|
|
|
|
|
|
#include "boards/board.h"
|
2013-09-18 15:52:07 +02:00
|
|
|
#include "arch/lpc_arch.h" // FIXME Ethernet
|
2013-09-16 11:38:46 +02:00
|
|
|
#include "lpc_phy.h"
|
|
|
|
|
|
|
|
/** @defgroup lan8720_phy PHY status and control for the LAN8720.
|
|
|
|
* @ingroup lwip_phy
|
|
|
|
*
|
|
|
|
* Various functions for controlling and monitoring the status of the
|
|
|
|
* LAN8720 PHY. In polled (standalone) systems, the PHY state must be
|
|
|
|
* monitored as part of the application. In a threaded (RTOS) system,
|
|
|
|
* the PHY state is monitored by the PHY handler thread. The MAC
|
|
|
|
* driver will not transmit unless the PHY link is active.
|
|
|
|
* @{
|
|
|
|
*/
|
|
|
|
|
|
|
|
/** \brief LAN8720 PHY register offsets */
|
|
|
|
#define LAN8_BCR_REG 0x0 /**< Basic Control Register */
|
|
|
|
#define LAN8_BSR_REG 0x1 /**< Basic Status Reg */
|
|
|
|
#define LAN8_PHYID1_REG 0x2 /**< PHY ID 1 Reg */
|
|
|
|
#define LAN8_PHYID2_REG 0x3 /**< PHY ID 2 Reg */
|
|
|
|
#define LAN8_PHYSPLCTL_REG 0x1F /**< PHY special control/status Reg */
|
|
|
|
|
|
|
|
/* LAN8720 BCR register definitions */
|
|
|
|
#define LAN8_RESET (1 << 15) /**< 1= S/W Reset */
|
|
|
|
#define LAN8_LOOPBACK (1 << 14) /**< 1=loopback Enabled */
|
|
|
|
#define LAN8_SPEED_SELECT (1 << 13) /**< 1=Select 100MBps */
|
|
|
|
#define LAN8_AUTONEG (1 << 12) /**< 1=Enable auto-negotiation */
|
|
|
|
#define LAN8_POWER_DOWN (1 << 11) /**< 1=Power down PHY */
|
|
|
|
#define LAN8_ISOLATE (1 << 10) /**< 1=Isolate PHY */
|
|
|
|
#define LAN8_RESTART_AUTONEG (1 << 9) /**< 1=Restart auto-negoatiation */
|
|
|
|
#define LAN8_DUPLEX_MODE (1 << 8) /**< 1=Full duplex mode */
|
|
|
|
|
|
|
|
/* LAN8720 BSR register definitions */
|
|
|
|
#define LAN8_100BASE_T4 (1 << 15) /**< T4 mode */
|
|
|
|
#define LAN8_100BASE_TX_FD (1 << 14) /**< 100MBps full duplex */
|
|
|
|
#define LAN8_100BASE_TX_HD (1 << 13) /**< 100MBps half duplex */
|
|
|
|
#define LAN8_10BASE_T_FD (1 << 12) /**< 100Bps full duplex */
|
|
|
|
#define LAN8_10BASE_T_HD (1 << 11) /**< 10MBps half duplex */
|
|
|
|
#define LAN8_AUTONEG_COMP (1 << 5) /**< Auto-negotation complete */
|
|
|
|
#define LAN8_RMT_FAULT (1 << 4) /**< Fault */
|
|
|
|
#define LAN8_AUTONEG_ABILITY (1 << 3) /**< Auto-negotation supported */
|
|
|
|
#define LAN8_LINK_STATUS (1 << 2) /**< 1=Link active */
|
|
|
|
#define LAN8_JABBER_DETECT (1 << 1) /**< Jabber detect */
|
|
|
|
#define LAN8_EXTEND_CAPAB (1 << 0) /**< Supports extended capabilities */
|
|
|
|
|
|
|
|
/* LAN8720 PHYSPLCTL status definitions */
|
|
|
|
#define LAN8_SPEEDMASK (7 << 2) /**< Speed and duplex mask */
|
|
|
|
#define LAN8_SPEED100F (6 << 2) /**< 100BT full duplex */
|
|
|
|
#define LAN8_SPEED10F (5 << 2) /**< 10BT full duplex */
|
|
|
|
#define LAN8_SPEED100H (2 << 2) /**< 100BT half duplex */
|
|
|
|
#define LAN8_SPEED10H (1 << 2) /**< 10BT half duplex */
|
|
|
|
|
|
|
|
/* LAN8720 PHY ID 1/2 register definitions */
|
|
|
|
#define LAN8_PHYID1_OUI 0x0007 /**< Expected PHY ID1 */
|
|
|
|
#define LAN8_PHYID2_OUI 0xC0F0 /**< Expected PHY ID2, except last 4 bits */
|
|
|
|
|
|
|
|
/**
|
|
|
|
* @brief PHY status structure used to indicate current status of PHY.
|
|
|
|
*/
|
|
|
|
typedef struct {
|
|
|
|
u32_t phy_speed_100mbs:2; /**< 10/100 MBS connection speed flag. */
|
|
|
|
u32_t phy_full_duplex:2; /**< Half/full duplex connection speed flag. */
|
|
|
|
u32_t phy_link_active:2; /**< Phy link active flag. */
|
|
|
|
} PHY_STATUS_TYPE;
|
|
|
|
|
|
|
|
/** \brief PHY update flags */
|
|
|
|
static PHY_STATUS_TYPE physts;
|
|
|
|
|
|
|
|
/** \brief Last PHY update flags, used for determing if something has changed */
|
|
|
|
static PHY_STATUS_TYPE olddphysts;
|
|
|
|
|
|
|
|
/** \brief PHY update counter for state machine */
|
|
|
|
static s32_t phyustate;
|
|
|
|
|
|
|
|
/** \brief Update PHY status from passed value
|
|
|
|
*
|
|
|
|
* This function updates the current PHY status based on the
|
|
|
|
* passed PHY status word. The PHY status indicate if the link
|
|
|
|
* is active, the connection speed, and duplex.
|
|
|
|
*
|
|
|
|
* \param[in] netif NETIF structure
|
|
|
|
* \param[in] linksts Status word with link state
|
|
|
|
* \param[in] sdsts Status word with speed and duplex states
|
|
|
|
* \return 1 if the status has changed, otherwise 0
|
|
|
|
*/
|
|
|
|
static s32_t lpc_update_phy_sts(struct netif *netif, u32_t linksts, u32_t sdsts)
|
|
|
|
{
|
|
|
|
s32_t changed = 0;
|
|
|
|
|
|
|
|
/* Update link active status */
|
|
|
|
if (linksts & LAN8_LINK_STATUS)
|
|
|
|
physts.phy_link_active = 1;
|
|
|
|
else
|
|
|
|
physts.phy_link_active = 0;
|
|
|
|
|
|
|
|
switch (sdsts & LAN8_SPEEDMASK) {
|
|
|
|
case LAN8_SPEED100F:
|
|
|
|
default:
|
|
|
|
physts.phy_speed_100mbs = 1;
|
|
|
|
physts.phy_full_duplex = 1;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case LAN8_SPEED10F:
|
|
|
|
physts.phy_speed_100mbs = 0;
|
|
|
|
physts.phy_full_duplex = 1;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case LAN8_SPEED100H:
|
|
|
|
physts.phy_speed_100mbs = 1;
|
|
|
|
physts.phy_full_duplex = 0;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case LAN8_SPEED10H:
|
|
|
|
physts.phy_speed_100mbs = 0;
|
|
|
|
physts.phy_full_duplex = 0;
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (physts.phy_speed_100mbs != olddphysts.phy_speed_100mbs) {
|
|
|
|
changed = 1;
|
|
|
|
if (physts.phy_speed_100mbs) {
|
|
|
|
/* 100MBit mode. */
|
|
|
|
lpc_emac_set_speed(1);
|
|
|
|
|
|
|
|
NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 100000000);
|
|
|
|
}
|
|
|
|
else {
|
|
|
|
/* 10MBit mode. */
|
|
|
|
lpc_emac_set_speed(0);
|
|
|
|
|
|
|
|
NETIF_INIT_SNMP(netif, snmp_ifType_ethernet_csmacd, 10000000);
|
|
|
|
}
|
|
|
|
|
|
|
|
olddphysts.phy_speed_100mbs = physts.phy_speed_100mbs;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (physts.phy_full_duplex != olddphysts.phy_full_duplex) {
|
|
|
|
changed = 1;
|
|
|
|
if (physts.phy_full_duplex)
|
|
|
|
lpc_emac_set_duplex(1);
|
|
|
|
else
|
|
|
|
lpc_emac_set_duplex(0);
|
|
|
|
|
|
|
|
olddphysts.phy_full_duplex = physts.phy_full_duplex;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (physts.phy_link_active != olddphysts.phy_link_active) {
|
|
|
|
changed = 1;
|
|
|
|
#if NO_SYS == 1
|
|
|
|
if (physts.phy_link_active)
|
|
|
|
netif_set_link_up(netif);
|
|
|
|
else
|
|
|
|
netif_set_link_down(netif);
|
|
|
|
#else
|
|
|
|
if (physts.phy_link_active)
|
|
|
|
tcpip_callback_with_block((tcpip_callback_fn) netif_set_link_up,
|
|
|
|
(void*) netif, 1);
|
|
|
|
else
|
|
|
|
tcpip_callback_with_block((tcpip_callback_fn) netif_set_link_down,
|
|
|
|
(void*) netif, 1);
|
|
|
|
#endif
|
|
|
|
|
|
|
|
olddphysts.phy_link_active = physts.phy_link_active;
|
|
|
|
}
|
|
|
|
|
|
|
|
return changed;
|
|
|
|
}
|
|
|
|
|
|
|
|
/** \brief Initialize the LAN8720 PHY.
|
|
|
|
*
|
|
|
|
* This function initializes the LAN8720 PHY. It will block until
|
|
|
|
* complete. This function is called as part of the EMAC driver
|
|
|
|
* initialization. Configuration of the PHY at startup is
|
|
|
|
* controlled by setting up configuration defines in
|
|
|
|
* lpc_emac_config.h.
|
|
|
|
*
|
|
|
|
* \param[in] netif NETIF structure
|
|
|
|
* \param[in] rmii If set, configures the PHY for RMII mode
|
|
|
|
* \return ERR_OK if the setup was successful, otherwise ERR_TIMEOUT
|
|
|
|
*/
|
|
|
|
err_t lpc_phy_init(struct netif *netif, int rmii)
|
|
|
|
{
|
|
|
|
u32_t tmp, tmp1;
|
|
|
|
s32_t i;
|
|
|
|
|
|
|
|
physts.phy_speed_100mbs = olddphysts.phy_speed_100mbs = 2;
|
|
|
|
physts.phy_full_duplex = olddphysts.phy_full_duplex = 2;
|
|
|
|
physts.phy_link_active = olddphysts.phy_link_active = 2;
|
|
|
|
phyustate = 0;
|
|
|
|
|
|
|
|
/* Only first read and write are checked for failure */
|
|
|
|
/* Put the LAN8720 in reset mode and wait for completion */
|
|
|
|
if (lpc_mii_write(LAN8_BCR_REG, LAN8_RESET) != 0)
|
|
|
|
return ERR_TIMEOUT;
|
|
|
|
i = 400;
|
|
|
|
while (i > 0) {
|
|
|
|
msDelay(1); /* 1 ms */
|
|
|
|
if (lpc_mii_read(LAN8_BCR_REG, &tmp) != 0)
|
|
|
|
return ERR_TIMEOUT;
|
|
|
|
|
|
|
|
if (!(tmp & (LAN8_RESET | LAN8_POWER_DOWN)))
|
|
|
|
i = -1;
|
|
|
|
else
|
|
|
|
i--;
|
|
|
|
}
|
|
|
|
/* Timeout? */
|
|
|
|
if (i == 0)
|
|
|
|
return ERR_TIMEOUT;
|
|
|
|
|
|
|
|
/* Setup link based on configuration options */
|
|
|
|
#if PHY_USE_AUTONEG==1
|
|
|
|
tmp = LAN8_AUTONEG;
|
|
|
|
#else
|
|
|
|
tmp = 0;
|
|
|
|
#endif
|
|
|
|
#if PHY_USE_100MBS==1
|
|
|
|
tmp |= LAN8_SPEED_SELECT;
|
|
|
|
#endif
|
|
|
|
#if PHY_USE_FULL_DUPLEX==1
|
|
|
|
tmp |= LAN8_DUPLEX_MODE;
|
|
|
|
#endif
|
|
|
|
lpc_mii_write(LAN8_BCR_REG, tmp);
|
|
|
|
|
|
|
|
/* The link is not set active at this point, but will be detected
|
|
|
|
later */
|
|
|
|
|
|
|
|
return ERR_OK;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Phy status update state machine */
|
|
|
|
s32_t lpc_phy_sts_sm(struct netif *netif)
|
|
|
|
{
|
|
|
|
static u32_t sts;
|
|
|
|
s32_t changed = 0;
|
|
|
|
|
|
|
|
switch (phyustate) {
|
|
|
|
default:
|
|
|
|
case 0:
|
|
|
|
/* Read BMSR to clear faults */
|
|
|
|
lpc_mii_read_noblock(LAN8_BSR_REG);
|
|
|
|
phyustate = 1;
|
|
|
|
break;
|
|
|
|
|
|
|
|
case 1:
|
|
|
|
/* Wait for read status state */
|
|
|
|
if (!lpc_mii_is_busy()) {
|
|
|
|
/* Get PHY status with link state */
|
|
|
|
sts = lpc_mii_read_data();
|
|
|
|
lpc_mii_read_noblock(LAN8_PHYSPLCTL_REG);
|
|
|
|
phyustate = 2;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
|
|
|
|
case 2:
|
|
|
|
/* Wait for read status state */
|
|
|
|
if (!lpc_mii_is_busy()) {
|
|
|
|
/* Update PHY status */
|
|
|
|
changed = lpc_update_phy_sts(netif, sts, lpc_mii_read_data());
|
|
|
|
phyustate = 0;
|
|
|
|
}
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
return changed;
|
|
|
|
}
|
|
|
|
|
|
|
|
/**
|
|
|
|
* @}
|
|
|
|
*/
|
|
|
|
|
|
|
|
/* --------------------------------- End Of File ------------------------------ */
|