kingkevin
/
espressif_tinyusb
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
espressif_tinyusb/hw/bsp/stm32f411disco/board.mk

47 lines
1.1 KiB
Makefile
Raw Normal View History

adding stm32f411 disco compile ok
2019-07-19 16:19:06 +02:00
CFLAGS += \
move -flto to board.mk current board that doesn work with flto is spresense and mimxrt10xx (due to xip image_vector_table is optimized out).
2019-11-20 10:06:40 +01:00
-flto \
adding stm32f411 disco compile ok
2019-07-19 16:19:06 +02:00
-mthumb \
switch stm32f4 to use st_driver submodule
2019-09-05 17:12:43 +02:00
-mabi=aapcs \
adding stm32f411 disco compile ok
2019-07-19 16:19:06 +02:00
-mcpu=cortex-m4 \
-mfloat-abi=hard \
-mfpu=fpv4-sp-d16 \
switch stm32f4 to use st_driver submodule
2019-09-05 17:12:43 +02:00
-nostdlib -nostartfiles \
move -flto to board.mk current board that doesn work with flto is spresense and mimxrt10xx (due to xip image_vector_table is optimized out).
2019-11-20 10:06:40 +01:00
-DSTM32F411xE \
switch stm32f4 to use st_driver submodule
2019-09-05 17:12:43 +02:00
-DCFG_TUSB_MCU=OPT_MCU_STM32F4
ST_HAL_DRIVER = hw/mcu/st/st_driver/STM32F4xx_HAL_Driver
ST_CMSIS = hw/mcu/st/st_driver/CMSIS/Device/ST/STM32F4xx
adding stm32f411 disco compile ok
2019-07-19 16:19:06 +02:00
# All source paths should be relative to the top level.
ported stm32f2, added board stm32f207zg nucleo close #127
2019-09-12 05:41:03 +02:00
LD_FILE = hw/bsp/$(BOARD)/STM32F411VETx_FLASH.ld
adding stm32f411 disco compile ok
2019-07-19 16:19:06 +02:00
SRC_C += \
switch stm32f4 to use st_driver submodule
2019-09-05 17:12:43 +02:00
$(ST_CMSIS)/Source/Templates/system_stm32f4xx.c \
$(ST_HAL_DRIVER)/Src/stm32f4xx_hal.c \
$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_cortex.c \
$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_rcc.c \
stm32: Refactor so F4 and H7 use a single Synopsys IP source file.
2019-09-09 16:48:14 +02:00
$(ST_HAL_DRIVER)/Src/stm32f4xx_hal_gpio.c
adding stm32f411 disco compile ok
2019-07-19 16:19:06 +02:00
SRC_S += \
switch stm32f4 to use st_driver submodule
2019-09-05 17:12:43 +02:00
$(ST_CMSIS)/Source/Templates/gcc/startup_stm32f411xe.s
adding stm32f411 disco compile ok
2019-07-19 16:19:06 +02:00
INC += \
switch stm32f4 to use st_driver submodule
2019-09-05 17:12:43 +02:00
$(TOP)/hw/mcu/st/st_driver/CMSIS/Include \
$(TOP)/$(ST_CMSIS)/Include \
$(TOP)/$(ST_HAL_DRIVER)/Inc \
$(TOP)/hw/bsp/$(BOARD)
adding stm32f411 disco compile ok
2019-07-19 16:19:06 +02:00
# For TinyUSB port source
VENDOR = st
stm32: Refactor so F4 and H7 use a single Synopsys IP source file.
2019-09-09 16:48:14 +02:00
CHIP_FAMILY = synopsys
adding stm32f411 disco compile ok
2019-07-19 16:19:06 +02:00
# For freeRTOS port source
FREERTOS_PORT = ARM_CM4F
# For flash-jlink target
added stm32f411 blackpill
2020-01-09 18:28:46 +01:00
JLINK_DEVICE = stm32f411ve
adding stm32f411 disco compile ok
2019-07-19 16:19:06 +02:00
JLINK_IF = swd
# flash target using on-board stlink
clean up flash-stlink
2020-01-10 09:09:59 +01:00
flash: flash-stlink