kingkevin
/
espressif_tinyusb
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
espressif_tinyusb/hw/bsp/stm32f407disco/board.mk

48 lines
1.3 KiB
Makefile
Raw Normal View History

fix pca10056 build error due to nrfx undef usage
2019-03-19 19:35:52 +01:00
CFLAGS += \
clean up
2019-05-14 08:31:12 +02:00
-DHSE_VALUE=8000000 \
-DSTM32F407xx \
-mthumb \
-mabi=aapcs-linux \
-mcpu=cortex-m4 \
-mfloat-abi=hard \
-mfpu=fpv4-sp-d16 \
-nostdlib -nostartfiles \
-DCFG_TUSB_MCU=OPT_MCU_STM32F4
needs to be filled out. blinks though
2018-11-28 03:11:03 +01:00
# All source paths should be relative to the top level.
rename bsp of stm32 board
2019-07-19 15:37:38 +02:00
LD_FILE = hw/bsp/stm32f407disco/STM32F407VGTx_FLASH.ld
needs to be filled out. blinks though
2018-11-28 03:11:03 +01:00
SRC_C += \
refactor stm32f407 to use st hal api
2019-07-22 13:35:22 +02:00
hw/mcu/st/system-init/system_stm32f4xx.c \
hw/mcu/st/stm32lib/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal.c \
hw/mcu/st/stm32lib/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_cortex.c \
hw/mcu/st/stm32lib/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_rcc.c \
hw/mcu/st/stm32lib/STM32F4xx_HAL_Driver/Src/stm32f4xx_hal_gpio.c
needs to be filled out. blinks though
2018-11-28 03:11:03 +01:00
SRC_S += \
st: Use submodules for system files when possible, use more up to date files otherwise. Update STM32F4-DISCOVERY demo and board.mk to reflect changes.
2019-03-04 16:41:05 +01:00
hw/mcu/st/startup/stm32f4/startup_stm32f407xx.s
needs to be filled out. blinks though
2018-11-28 03:11:03 +01:00
INC += \
refactor stm32f407 to use st hal api
2019-07-22 13:35:22 +02:00
$(TOP)/hw/mcu/st/cmsis \
add make.mk and rules.mk to help new makefile example
2019-05-01 09:27:17 +02:00
$(TOP)/hw/mcu/st/stm32lib/CMSIS/STM32F4xx/Include \
refactor stm32f407 to use st hal api
2019-07-22 13:35:22 +02:00
$(TOP)/hw/mcu/st/stm32lib/STM32F4xx_HAL_Driver/Inc \
$(TOP)/hw/bsp/stm32f407disco
needs to be filled out. blinks though
2018-11-28 03:11:03 +01:00
add make.mk and rules.mk to help new makefile example
2019-05-01 09:27:17 +02:00
# For TinyUSB port source
Move all paths using "stm" to "st" subdirectories, update config.mk.
2019-02-27 15:15:07 +01:00
VENDOR = st
needs to be filled out. blinks though
2018-11-28 03:11:03 +01:00
CHIP_FAMILY = stm32f4
add flash target for stm32 board using stm32cubeprogammger cli
2019-03-08 19:04:26 +01:00
add make.mk and rules.mk to help new makefile example
2019-05-01 09:27:17 +02:00
# For freeRTOS port source
FREERTOS_PORT = ARM_CM4F
# For flash-jlink target
update flash-jlink target for m0 and m4 board
2019-03-17 09:42:57 +01:00
JLINK_DEVICE = stm32f407vg
add make.mk and rules.mk to help new makefile example
2019-05-01 09:27:17 +02:00
JLINK_IF = swd
update flash-jlink target for m0 and m4 board
2019-03-17 09:42:57 +01:00
simplify board API, adding stm32f3 discovery - remove board header since it is not used
2019-03-22 16:06:48 +01:00
# Path to STM32 Cube Programmer CLI, should be added into system path
STM32Prog = STM32_Programmer_CLI
adding segger project for stm32f4
2019-03-09 19:24:13 +01:00
adding flash (jlink)
2019-03-15 19:34:26 +01:00
# flash target using on-board stlink
update flash-jlink target for m0 and m4 board
2019-03-17 09:42:57 +01:00
flash: $(BUILD)/$(BOARD)-firmware.elf
add flash target for stm32 board using stm32cubeprogammger cli
2019-03-08 19:04:26 +01:00
$(STM32Prog) --connect port=swd --write $< --go