acde49ccc9
enable pull-up in dcd_init() instead of usbd
2020-08-01 20:14:58 +07:00
503c15217e
example to call tud_init() after freeRTOS kernel is started
...
add note for usb init when using with RTOS
2020-07-23 09:20:45 +07:00
be744e1e01
Merge pull request #466 from chang196700/feature/string_desc_msos
...
Remove 0xEE index string if statement & change TU_ASSERT to TU_VERIFY
2020-07-21 20:25:08 +07:00
5cd654838b
Remove 0xEE index string if statement & change TU_ASSERT to TU_VERIFY
...
Signed-off-by: Chang Feng <chang_196700@hotmail.com>
2020-07-19 19:13:17 +08:00
706413f751
add tud_speed_get()
...
- define both fs and hs configuration descriptor
- rename CFG_TUD_CDC_EPSIZE to CFG_TUD_CDC_EP_BUFSIZE with default size of 64 for FS, and 512 for HS
2020-07-16 00:44:09 +07:00
ab75998316
Merge branch 'master' into add-stm-hs
2020-06-30 01:55:57 +07:00
57b553e023
Fix IAR warnings.
...
Pa039 : use of address of unaligned structure member.
Pe188: enumerated type mixed with another type.
2020-06-17 10:08:33 +02:00
bc7e24b659
Fix wrong comment for IAD checks.
2020-06-14 14:22:10 +02:00
95966c2201
improve usbd log for control transfer
2020-06-14 18:29:02 +07:00
b25bbf4776
Fix alignment.
2020-06-14 12:58:16 +02:00
3012175351
Fix alignment.
2020-06-14 12:57:00 +02:00
48b2e6cf78
Fix too strict checks on subclass and interface of iad descriptor.
2020-06-13 13:51:50 +02:00
e92118635c
adding speed detect on bus reset
2020-06-01 13:40:18 +07:00
f771afe6af
fixed EP0 size to 64 since LS is not supported in device mode
...
- set turn-around and report actual speed in Enum Done
- add dcd_event_bus_reset() helper to report speed
2020-05-31 23:43:29 +07:00
5efeaf2ac1
Merge pull request #413 from kasjer/kasjer/ble-over-usb
...
Bluetooth HCI transport over USB
2020-05-31 15:07:56 +07:00
d6d29897f3
add get device qualifier descriptor
2020-05-28 23:16:16 +07:00
56d46483e4
Add bt hci device class
...
Code implements USB transport for bluetooth HCI.
2020-05-28 10:58:49 +02:00
077437b3dc
Add non standard request handling in class
...
For some reason bluetooth stack implementations send class requests
to device instead of interface.
To implement HCI interface over USB non device addressed requests
for class need to be handled.
2020-05-28 10:11:37 +02:00
e340404968
changing usbd driver open() return type, add max_len
...
only done with cdc and msc, push this interim for feedback first
2020-05-27 19:01:59 +07:00
d4bf777c94
try to get synopsys work with OTG HS + external PHY
2020-05-27 11:01:33 +07:00
88a455a9b9
added tud_task_event_ready()
...
to check if there is pending events in the tud task without executing
it. Useful to check before entering low power mode with WFI/WFE
2020-05-20 14:31:45 +07:00
63bd8d2e44
device: fix build warning when CFG_TUSB_DEBUG >= 2
...
The function is defined inside of a function body which generates a
warning. Circuit Python treats these warnings as errors, and so
refuses to build with debugging enabled:
../../lib/tinyusb/src/device/usbd_control.c: In function 'usbd_control_xfer_cb':
../../lib/tinyusb/src/device/usbd_control.c:195:19: error: nested extern declaration of 'usbd_driver_print_control_complete_name' [-Werror=nested-externs]
195 | extern void usbd_driver_print_control_complete_name(bool (*control_complete) (uint8_t, tusb_control_request_t const *));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [../../py/mkrules.mk:55:
build-simmel/lib/tinyusb/src/device/usbd_control.o] Error 1
Move the declaration to the top of the function to silence this warning.
Signed-off-by: Sean Cross <sean@xobs.io>
2020-05-07 19:03:40 +08:00
6f4b6a1d03
remove the use of TU_VERIFY_HDLR
2020-04-29 11:31:27 +07:00
d4511186a2
Merge pull request #383 from kasjer/kasjer/fox-busy-flag-race-condition
...
Fix endpoint busy flag race condition
2020-04-29 10:12:31 +07:00
fcdb22b2f9
fix typo
2020-04-28 10:53:43 +07:00
63cefb7615
Fix endpoint busy flag race condition
...
Busy flag was set to true after call to dcd_edpt_xfer().
In some cased it was possible that transfer finished before function
ended.
In this case busy flag could be set to false before it was set to
true.
Then setting it to true after dcd_edpt_xfer() made edpoint busy forever.
This change marks endpoint as busy before transfer is started to
avoid race condition.
2020-04-27 16:42:35 +02:00
a1c599f4b6
clean up log message
2020-04-26 22:02:49 +07:00
017c95037f
add usbd edpt open
...
- RTT mode is blocking to prevent log lost
- Improve logging message
2020-04-26 14:51:44 +07:00
379b8ac556
Merge pull request #365 from pigrew/desc_tu_verify
...
tu_verify for getting descriptors
2020-04-22 12:24:05 +07:00
0ec69de77c
sof is optional, revert other changes but remove unneeded check.
2020-04-21 10:06:17 -04:00
d1656c0b8d
tu_verify for getting descriptors
2020-04-20 16:09:15 -04:00
bbcf9241bd
add back MIDI multiple jack
2020-04-20 23:46:17 +07:00
6f9c256ad0
complete remove dcd_set_config(), fix unit test
2020-04-17 13:52:34 +07:00
05476d9ad7
Merge branch 'master' into remove-dcd-set-config
2020-04-17 13:38:22 +07:00
50be9d7c3a
mass rename tud/dcd_irq_handler to tud/dcd_init_handler
2020-04-17 12:27:53 +07:00
33610751d7
Merge pull request #336 from pigrew/edpt_close
...
> If you notice my chain of events above, the bulk transfer was started BEFORE the SET_INTERFACE call. The USB device hardware swaps the order of them being delivered. On STM32, it gives priority to the lower-numbered EP index.
It shouldn't be a matter, control is 2+ stage, before sending the setup. Host should stop all communication to the endpoint that It wants to close.
2020-04-16 23:10:36 +07:00
bfec3b4479
Merge pull request #345 from hathach/add-alt-itf
...
Implement setInterface(alt) for usb net driver
2020-04-16 21:33:03 +07:00
2994d100cd
Remove transfer queue filtering. May need to be revisited later.
2020-04-16 09:59:40 -04:00
969121df4f
added dcd disconnect/connect to lpc17/40
2020-04-16 15:52:45 +07:00
2eed58d096
per review
2020-04-16 11:13:54 +07:00
0ddbda08cb
always response if GET_INTERFACE even if class driver does not support alt interface
2020-04-15 23:08:49 +07:00
caa1dceed9
implement alternate setInterface() request
...
mostly forward these request (recipient = interface) to class driver.
2020-04-15 17:51:02 +07:00
d315393fbb
use IAD to assign itf2drv mapping correctly
...
merge net_data back into net driver
2020-04-15 16:18:24 +07:00
0b39168dc2
add IAD for CDC ECM, remove EEM descriptor template
2020-04-15 15:40:53 +07:00
b03b9eb939
change cdc template protocol to None
2020-04-15 15:14:26 +07:00
93ffe317b2
clean up
2020-04-15 13:53:50 +07:00
3bfb402d8c
clean up
2020-04-15 11:44:12 +07:00
1faa3b2768
tested usbnet, completely remove class code
2020-04-15 11:41:26 +07:00
c74f7e708e
remove class_code/subclass/protocol from driver structure, add name for logging
2020-04-15 11:06:35 +07:00
f1a6f92fab
Merge branch 'master' into class-driver-id
2020-04-15 10:47:49 +07:00
hathach