d4511186a2
Merge pull request #383 from kasjer/kasjer/fox-busy-flag-race-condition
...
Fix endpoint busy flag race condition
2020-04-29 10:12:31 +07:00
63cefb7615
Fix endpoint busy flag race condition
...
Busy flag was set to true after call to dcd_edpt_xfer().
In some cased it was possible that transfer finished before function
ended.
In this case busy flag could be set to false before it was set to
true.
Then setting it to true after dcd_edpt_xfer() made edpoint busy forever.
This change marks endpoint as busy before transfer is started to
avoid race condition.
2020-04-27 16:42:35 +02:00
a1c599f4b6
clean up log message
2020-04-26 22:02:49 +07:00
017c95037f
add usbd edpt open
...
- RTT mode is blocking to prevent log lost
- Improve logging message
2020-04-26 14:51:44 +07:00
0ec69de77c
sof is optional, revert other changes but remove unneeded check.
2020-04-21 10:06:17 -04:00
d1656c0b8d
tu_verify for getting descriptors
2020-04-20 16:09:15 -04:00
05476d9ad7
Merge branch 'master' into remove-dcd-set-config
2020-04-17 13:38:22 +07:00
33610751d7
Merge pull request #336 from pigrew/edpt_close
...
> If you notice my chain of events above, the bulk transfer was started BEFORE the SET_INTERFACE call. The USB device hardware swaps the order of them being delivered. On STM32, it gives priority to the lower-numbered EP index.
It shouldn't be a matter, control is 2+ stage, before sending the setup. Host should stop all communication to the endpoint that It wants to close.
2020-04-16 23:10:36 +07:00
2994d100cd
Remove transfer queue filtering. May need to be revisited later.
2020-04-16 09:59:40 -04:00
2eed58d096
per review
2020-04-16 11:13:54 +07:00
0ddbda08cb
always response if GET_INTERFACE even if class driver does not support alt interface
2020-04-15 23:08:49 +07:00
caa1dceed9
implement alternate setInterface() request
...
mostly forward these request (recipient = interface) to class driver.
2020-04-15 17:51:02 +07:00
d315393fbb
use IAD to assign itf2drv mapping correctly
...
merge net_data back into net driver
2020-04-15 16:18:24 +07:00
93ffe317b2
clean up
2020-04-15 13:53:50 +07:00
3bfb402d8c
clean up
2020-04-15 11:44:12 +07:00
1faa3b2768
tested usbnet, completely remove class code
2020-04-15 11:41:26 +07:00
c74f7e708e
remove class_code/subclass/protocol from driver structure, add name for logging
2020-04-15 11:06:35 +07:00
f1a6f92fab
Merge branch 'master' into class-driver-id
2020-04-15 10:47:49 +07:00
7fa8d87291
usbnet: remove CDC-EEM
2020-04-14 21:10:43 -05:00
3ef6e33533
use class driver open() for interface support detection
...
tested with dfu_runtime
2020-04-15 01:00:37 +07:00
ae60146274
use explicit all_subclass and all_protocol since 0xFF is stil valid
2020-04-14 22:35:34 +07:00
16f65890eb
Merge branch 'master' into edpt_close
2020-04-14 10:22:03 -04:00
b90b00d43b
complete adding subclass and protocol to driver id
2020-04-14 18:35:50 +07:00
593fe154ec
adding subclass & protocol to class driver structure
2020-04-14 18:00:59 +07:00
de208b31cf
edpt_close: Remove item from queue instead of modifying it.
2020-04-13 11:05:34 -04:00
f8e7487355
edpt_close: Updated based on feedback.
2020-04-13 09:51:46 -04:00
f4df829399
lpc17xx move set configdevice into set address
...
for removing dcd_set_config()
2020-04-13 17:04:18 +07:00
0eeaccaf46
Skeleton, and initial stm32fsdev implementation (that leaks memory)
2020-04-12 21:27:27 -04:00
bb3bbcc00b
usbnet: OS-agnostic (Windows/Linux/macOS) network driver
2020-04-12 15:41:18 -05:00
07809d03a7
Merge pull request #332 from pigrew/stm32fsdev-dcdconnect
...
stm32fsdev: Implement dcd_connect.
2020-04-11 13:20:31 +07:00
1b3d1b52c9
fix uint32_t format with log
2020-04-10 13:54:50 +07:00
715c4dbbf8
stm32fsdev: Implement dcd_connect.
2020-04-09 17:03:12 -04:00
c026236824
house keeping
2020-04-06 16:33:04 +07:00
4f871063fd
Merge branch 'master' into cr1901-msp430f5529
2020-03-22 17:19:57 +07:00
7aa5a53652
fix log printf
2020-03-08 13:26:36 +07:00
fee79d7466
add CDC-ECM/RNDIS/CDC-EEM network device class with example
2020-03-02 21:15:01 -06:00
b8ea0f0a6b
Add langid support to descriptor string callback.
...
Signed-off-by: Chang Feng <chang_196700@hotmail.com>
2020-02-26 13:07:15 +08:00
25c1bea782
Normalize line endings
2020-01-15 14:47:43 -05:00
d6a8d42bd6
Merge pull request #254 from majbthrd/multi-setconfig
...
gracefully handle multiple SET_CONFIGURATION requests
2020-01-05 17:48:55 +07:00
db24b2f372
Let device respond to endpoint requests on EP0 ( #251 )
...
Since endpoint 0 is used for control requests, it doesn't have a class driver attached to it. As such, the corresponding `_usbd_dev.ep2drv` entry points to driver `0xFF`, which is invalid and this makes the `TU_ASSERT(drvid < USBD_CLASS_DRIVER_COUNT);` line fail, and eventually causes an endpoint stall. So as-is the stack cannot respond to any endpoint requests on endpoint 0.
However, standard requests on endpoint 0 do not need a class driver to produce a valid response. This commit changes the order of execution so that the assert is only checked if the endpoint is not 0.
2019-12-30 10:58:06 +07:00
e7bf66b29e
gracefully handle multiple SET_CONFIGURATION requests
2019-12-28 16:49:52 -06:00
bbada1d3e6
adding lookup table for debugging
...
add msc scsi command list
2019-12-23 18:54:06 +07:00
050fa2fd39
able to response to scsi inquiry, but failed to response to test unit ready
2019-12-21 19:33:41 +07:00
d7558e8a0f
use dcd_edpt0_status_complete() to set address without blocking for samd21/samd51/stm32_fsdev
2019-11-28 13:39:29 +07:00
5dc04887e2
get passed set address
2019-11-28 11:48:08 +07:00
40b454cf28
get passed first get device descriptor
2019-11-27 23:20:48 +07:00
8a1b6327ba
extract code to invoke_class_control()
...
- also rename usbd_class_drivers to _usbd_driver
2019-11-27 12:12:52 +07:00
1ab3a1035c
Merge branch 'master' into cr1901-msp430f5529
2019-11-05 10:17:36 +07:00
3c49ff153e
Merge pull request #149 from pigrew/ZLP_Request2
...
Zlp request2
2019-11-05 00:05:21 +07:00
8d0fa158d7
Change one more TU_ASSERT to TU_VERIFY in usbd.
2019-11-04 11:33:14 -05:00
2727983a2d
fix #211
2019-11-04 22:52:29 +07:00
a94fe05ecb
usbd: Change TU_ASSERT to TU_VERIFY as the assertion can be hit when bad data is sent from host.
2019-11-04 08:59:29 -05:00
62f8c14fae
add a bit of log1 for debugging
2019-11-03 14:08:38 +07:00
1b51b78eaf
hack the request length for the first get device descriptor if EP0 size =8 or 16
...
to prevent usbd control send out ZLP
2019-11-03 00:17:17 +07:00
a0cffdc843
Merge branch 'pigrew-ZLP_Request2' into cr1901-msp430f5529
2019-11-02 23:29:35 +07:00
cacbb80a90
zlp should work with control in, tested with Unity framework
2019-10-31 21:14:06 +07:00
6de9eb4b1a
add more tests, fix an issue with tud_descriptor_configuration_cb() return NULL
2019-10-31 13:06:57 +07:00
4d329d46cc
Merge pull request #206 from hathach/develop
...
Added a couple of unit testing with Ceedling/Cmock/Unity
2019-10-31 08:29:11 +07:00
a0002cc709
rename usbd_init() to tud_init()
2019-10-30 23:26:34 +07:00
880ac1e398
move dcd event helper to be dcd.h as inline function
2019-10-30 11:35:25 +07:00
f6a65720e5
should fix #184
...
only response up to EP0 size with get device descriptor if not
addressed.
2019-10-29 16:25:32 +07:00
78523301bb
Merge pull request #202 from smunaut/dfu-rt
...
Add support for DFU Runtime class for devices
2019-10-28 22:56:14 +07:00
ec4ecfa817
Add support for DFU Runtime class for devices
...
This is really just a few descriptors and then answering to the
request from the host to reboot into DFU mode.
That latter part is delegated to the app since this is platform
specific.
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2019-10-28 16:11:08 +01:00
6ab0663c1a
adding more log
2019-10-24 12:00:06 +07:00
661515a807
adding debug log function
2019-10-23 21:18:46 +07:00
204791b3e7
2nd attempt to fix #161
2019-10-01 22:19:04 +07:00
12609f818b
fix #161 added volatile for ep_busy_map/ep_stall_map
2019-10-01 14:43:34 +07:00
2aa10daf26
Merge branch 'clear_feature_ordering' into usbtmc
2019-09-21 21:39:25 -04:00
9498adef71
Changing the bitwise to a logical OR created a huge hard to find bug. It shortcutted the call to the class function,
...
so, lets use shortcutting anyway?
2019-09-21 19:29:57 -04:00
fbb8520acd
logical or.
2019-09-21 14:34:29 -04:00
37b52e354f
Correct wording of comment on handling EP requests.
2019-09-21 12:17:17 -04:00
a187f0268c
When unstalling, EP must be marked as not busy. Also, mark EP as busy when stalling as xfer requests should fail.
2019-09-21 12:05:57 -04:00
be28a05409
Make type casting explicit
2019-09-21 12:05:46 -04:00
55abb3d717
Calling EP open with bad parameters should be considered a bug.
2019-09-21 12:02:52 -04:00
aebecf169a
Reorder handling of EP control requests,
2019-09-21 12:02:06 -04:00
2a7ca15e2c
Rename functions to include tud_ and _cb
2019-09-19 20:43:49 -04:00
7e0490bbf3
Move descriptors to usbd.h
2019-09-19 19:51:37 -04:00
ac2c9ff02f
Merge branch 'master' into usbtmc
2019-09-17 13:31:53 -04:00
9c5ae0369b
follow up to suggestion to pr 155
2019-09-16 11:13:17 +07:00
1cae96951f
Add usbtmc class driver.
2019-09-14 13:35:08 -04:00
ac8c343fef
fix #154 forward all endpoint recipeint request to class driver
...
fix typo
remove magic number 0xff of driver id
2019-09-13 22:16:24 +07:00
064adebbd0
fix #152 , potential memory issue
2019-09-13 14:03:59 +07:00
c3598f0301
fix #139 , correct usbd request intepreting, Non-STD request to Interface must be forward to class driver
2019-09-13 13:03:11 +07:00
cdaf455461
fix stall response with SET_INTERFACE/GET_INTERFACE
...
webusb work with linux & macos
2019-07-26 20:14:56 +07:00
d2b60b6755
webusb work great with linux
2019-07-26 11:36:30 +07:00
2a543c0e79
update vendor device similar to cdc read/write
...
maybe refactor later
2019-07-24 23:07:30 +07:00
c63f2b30cb
rename tud_control_vendor_request_cb/complete_cb to tud_vendor_control_request_cb/complete_cb
2019-07-24 09:45:32 +07:00
33de35504a
more house keeping
2019-07-19 20:20:13 +07:00
ae5dc435cb
house keeping
2019-07-19 16:49:04 +07:00
b0678e1050
rename CFG_TUD_CUSTOM_CLASS to CFG_TUD_VENDOR
2019-07-19 16:23:56 +07:00
036e858543
add tud_control_vendor_request_cb()/tud_control_vendor_complete_cb(), expose usbd control transfer
...
rename usbd_control_transfer/status to tud_control_transfer/status
2019-07-16 18:14:47 +07:00
cb4e6837e9
clean up, rename internal driver control_request_complete to simply control_complete
2019-07-12 22:03:40 +07:00
164b26ee6b
change TUD_HID_INOUT_DESCRIPTOR epout & epin order
...
clean up, adding template for BOS & BOS platform descriptor
2019-07-12 14:53:11 +07:00
e74aa41552
added tud_descriptor_bos_cb(), add support for BOS get descriptor
2019-07-12 00:12:14 +07:00
7156bfb54d
fix build error with midi, use usbd_edpt_xfer/busy for midi to replace dcd_*
2019-06-10 18:46:00 +07:00
13e01c7dca
add TU_ prefix to compiler ATTR to prevent name conflict with application
2019-06-06 10:39:37 +07:00
a0307bafda
added usbd_edpt_xfer/usbd_edpt_busy to replace dcd_edpt_transfer/dcd_edpt_busy()
...
- improve fifo write/read_n with only one lock
- use usbd_edpt_xfer/usbd_edpt_busy for hid/cdc/msc class driver
- replace cdc read's pending_read_from_host by usbd_edpt_busy()
2019-05-29 16:55:15 +07:00
8ccecde18e
lpc1769 work with makefile
2019-05-15 12:57:31 +07:00
3e6d911ce9
more clean up use inline bit funciton instead of macros
2019-05-14 12:54:29 +07:00
61ec407752
update license year to 2019
2019-05-14 11:48:05 +07:00
f3a5ea65a9
add index to tud_descriptor_configuration_cb()
2019-05-12 19:55:15 +07:00
1174949308
change tud_descriptor_string_cb() to be consistent with other descriptor callback
2019-05-12 15:38:15 +07:00
ba2136486c
add tud_hid_descriptor_report_cb()
...
- remove tud_desc_set.hid_report
- remove tud_desc_set_t
2019-05-12 14:09:35 +07:00
de56a0ca89
add tud_descriptor_string_cb() for getting string descriptor from application
...
- remove tud_desc_set.string_arr/string_count
2019-05-11 16:31:52 +07:00
77bc421359
fix clear stall usage, fix reset data toggle with dcd_clear_stall for nrf52
2019-05-09 23:31:18 +07:00
c006f3dbce
adding optional ep out for hid
...
refactor usbd_open_edpt_pair
2019-05-01 19:29:56 +07:00
23bcf1cc7a
remove auto descriptor and its option CFG_TUD_DESC_AUTO
2019-04-18 23:59:21 +07:00
72575534f8
remove auto device descriptor
...
Application should declare its own device descriptor
2019-04-11 00:51:28 +07:00
491b5936d5
usbd better support suspend/resume
2019-04-02 01:30:01 +07:00
eabfc53f38
added tud_suspended() and tud_ready()
2019-03-30 23:01:23 +07:00
f3a954e7de
self powered and remote wakeup support are from configuration descriptor attribute
2019-03-30 17:38:00 +07:00
b28cc6ddb1
added dcd_remote_wakeup() stub for all ports
2019-03-30 14:47:11 +07:00
cabf6abb4f
added tud_set_self_powered(), fix #50 reponse to GET_STATUS request
2019-03-30 14:34:38 +07:00
d9682f8240
replaced config_num by configured
2019-03-30 13:48:15 +07:00
93a853cd5b
usbd add connected, suspended, remote_wakeup
...
- remove use of osal_queue_reset
2019-03-30 02:26:15 +07:00
7d9b68a7b9
clean up control req a bit
2019-03-29 16:55:58 +07:00
3a38cde53d
support set/clear feature Device_remote_wakeup
2019-03-29 16:37:08 +07:00
1c2beba85c
working on suspend and resume
...
change dcd_init signature
2019-03-29 16:23:00 +07:00
0bdd4bd550
added Suspend and Resume event for nrf5x port
...
also rename DCD_EVENT_SUSPENDED to DCD_EVENT_SUSPEND
2019-03-29 01:34:53 +07:00
8fb9fbb0b1
add tud_mounted() check in tud_cdc_connected()
...
mark device as disconnected immed with DCD_EVENT_UNPLUGGED
2019-03-27 23:58:24 +07:00
da452d4ba6
cleanup, remove the use of _TINY_USB_SOURCE_FILE_
2019-03-27 17:48:42 +07:00
f26fbaf404
clean up remove usbd_control_stall()
2019-03-27 16:26:52 +07:00
1e9848d917
replace dcd_edpt_(clear)stall by usbd_edpt_(clear)stall
...
- remove dcd_edpt_stalled() from dcd porting
2019-03-27 16:09:49 +07:00
c211ee19dd
migrate license from BSD 3 clause to MIT
2019-03-20 16:11:42 +07:00
eda56769b9
dcd_set_address include status response, usbd control stall both control in and out
2019-03-13 23:14:48 +07:00
59c1b4b427
zero init internal class/device data
2019-01-29 19:39:34 +07:00
e4e8413acc
add tusb_inited() API, check for inited() before running device/host task
2019-01-29 19:05:07 +07:00
a3173b8de4
Add USB Midi support.
...
It also introduces a txbuffer which copies data into it but passes
the buffer straight to the USB rather than another copy.
2019-01-04 12:16:27 -08:00
1c49c479ca
seperate tusb_task() to tud_task() and tuh_task()
...
tusb_task() still exists for backward compatible
2018-12-13 14:51:37 +07:00
af1ffe4675
remove task void* param
2018-12-13 13:53:43 +07:00
bc46dc6edf
osal clean up
...
remove OSAL_TASK_DEF, osal_task_create. Applicaton should create a task
and call tinyusb_task(). This make API consistent with NO OS.
2018-12-13 13:49:09 +07:00
c1c501e0c2
change usbd xfer_cb return type to bool
2018-12-12 13:12:06 +07:00
b6cb4757d2
change class driver open return type to bool
2018-12-12 13:00:59 +07:00
6c0b0917e1
rename descriptor_* helper to tu_desc_*
2018-12-12 12:01:15 +07:00
6d86db3977
rename edpt_dir/number/addr to tu_edpt_*
2018-12-12 11:51:31 +07:00
4e7596ca9c
add tuh_mount_cb/tuh_umount_cb
2018-12-10 19:25:57 +07:00
9c4c797502
add ep addr to host cdc
2018-12-10 19:01:28 +07:00
ac67e0ea3f
clean up
2018-12-10 05:15:49 +07:00
6a6e7d0ecb
refactor usbh class driver
2018-12-10 05:07:22 +07:00
4537ba66e5
fixing build error with host stack
2018-12-05 20:26:55 +07:00
d887829b4c
change usbd_init() return to bool for simplicity
2018-12-05 17:30:04 +07:00
6f3898572d
add role to OSAL_QUEUE_DEF() to disable correct dcd/hcd isr
2018-12-05 17:01:19 +07:00
a73017fdc2
hal clean up
...
- replace tusb_hal_int_enable/disable to dcd_int_enable/disable,
hcd_int_enable/disable
- remove tusb_hal_init(), this will be part of dcd_init/hcd_init,
anything beyond dcd/hcd should be inited by bsp
2018-12-05 13:20:25 +07:00
064eec5dd8
clean up warnings
2018-11-26 12:29:55 +07:00
f196b24dce
rename DCD_XFER_SUCCESS to XFER_RESULT_SUCCESS
2018-11-23 15:22:46 +07:00
cb8782e5f2
rename tusb_event_t to xfer_result_t
2018-11-23 15:14:47 +07:00
d036f62b0e
samd51 fix stable issue with dcd
2018-11-20 17:25:41 +07:00
00694b56c5
nrf5x: clean up dcd, add comment
2018-11-16 22:17:11 +07:00
1640e7590e
remove control.h (move prototype to usbd_pvt.h)
2018-11-16 21:58:35 +07:00
215f8603b1
nrf5x: refactor device control transfer.
...
- make control transfer as part of usbd. Class driver must use
usbd_control_ API() instead of dcd_ api.
- change the signature of class driver's control_request
- allow control request complete to stall in staus stage
- move control request parser & handling to usbd.
2018-11-16 21:56:39 +07:00
95cd6c3a2f
remove control from class driver array
2018-11-14 23:39:58 +07:00
5757918df4
usbd clean up
2018-11-14 17:40:29 +07:00
ff26c5c6b1
clean up
2018-11-14 16:40:07 +07:00
10bf41f718
change osal_queue_receive() signature
...
- fix build issue with freertos
2018-11-14 16:31:28 +07:00
30e3c64134
Polish up control split and treat it more like a normal endpoint.
2018-11-08 13:45:30 -08:00
7a40ec2647
Split out the control endpoint logic
2018-11-07 23:04:34 -08:00
c582c0fda9
Add SAMD21 and SAMD51 support for CircuitPython.
...
The ProtoThreads style subtasks were removed because it led to
extremely unclear control flow. RTOSes can be used if threading is
needed.
Also added some additional functionality to MSC to support dynamic
LUNs and read-only LUNs.
2018-11-07 12:02:28 -08:00
e9de56ad83
defer DCD_EVENT_BUS_RESET, DCD_EVENT_UNPLUGGED to usbd task
2018-11-02 17:29:49 +07:00
87d89cf5cb
fix nrf52 freeRTOS interrupt priority
2018-10-24 16:48:27 +07:00
bfa10016ae
rename verify_breakpoint to TU_BREAKPOINT
2018-10-24 12:37:43 +07:00
55427606ef
replace dcd_xfer_complete by dcd_xfer_complete()
2018-10-24 00:44:26 +07:00
177adf4bfa
replace dcd_bus_event() and dcd_setup_received() by dcd_event_handler()
2018-10-23 16:31:45 +07:00
9ba624a974
rename UBSD_EVT_ to DCD_EVENT_
2018-10-23 15:12:30 +07:00
e97b14848b
rename usbd_event_t to dcd_event_t
2018-10-23 15:08:31 +07:00
959480d82c
clean up usbd
2018-10-23 13:12:19 +07:00
c7340f4b0e
clean up helper func
2018-10-23 12:19:32 +07:00
8600c4b616
adding mynewt to osal
2018-09-04 14:20:51 +07:00
4ef01d721a
clean up osal task and subtask
2018-08-30 15:21:15 +07:00
c8b72e397e
add while loop to usbd task to run until task queue is empty
2018-08-28 15:56:43 +07:00
c5d2f661e7
rename common func to avoid conflict
2018-08-23 20:09:28 +07:00
e07b1acbed
rename VERIFY to TU_VERIFY to avoid conflict with application
2018-08-13 18:10:23 +07:00
6d96b12e27
improve auto descriptor
2018-08-01 00:50:04 +07:00
683bb574e7
hid device enhance
2018-07-29 14:03:48 +07:00
8b17c54609
fix hid generic various error
2018-07-28 22:42:44 +07:00
c729db2294
beter hid report
2018-07-28 18:14:30 +07:00
9f61493020
change HID config, move HID boot config to part of auto descriptor only
2018-07-28 12:38:45 +07:00
456506045f
seperate CFG_TUD_HID_BOOT_PROTOCOL to CFG_TUD_HID_KEYBOARD_BOOT & CFG_TUD_HID_MOUSE_BOOT
2018-07-27 21:48:15 +07:00
544f9c1315
add dcd_edpt_stalled() API
...
- implement control endpoint get status, endpoint set feature
2018-07-25 21:21:33 +07:00
71934228d2
tested boot mouse working
2018-07-25 00:16:09 +07:00
67e52af936
fix boot mouse descriptor issue
2018-07-24 22:37:44 +07:00
262be103e0
add descriptor string count for tud_desc_set_t
2018-07-23 16:12:14 +07:00
2bff2a7d97
fix descriptor minor issue
2018-07-23 16:01:02 +07:00
4342325ee1
reworking device hid class driver
2018-07-23 15:25:45 +07:00
798ce59ebd
revert usbd_control_xfer_st() implementation
...
enhance cdc with better multiple interfaces support
add default ep size for cdc and msc device CFG_TUD_CDC_EPSIZE,
CFG_TUD_MSC_EPSIZE
2018-07-17 16:04:55 +07:00
e0c4e11ea3
use _usbd_ctrl_buf for control transferm refactor cdc device
2018-07-14 15:12:42 +07:00
7a1f40593f
only call class xfer callback associated with endpoint address
2018-07-13 18:01:16 +07:00
1efb552bfd
add ep2drv, rename descriptor offset
2018-07-13 17:48:26 +07:00
cd5b5d3a53
change mapping interface to driver instead of class code
2018-07-13 16:52:22 +07:00
dccb06ba7d
rename class driver close() to reset()
2018-07-13 16:09:26 +07:00
5f8882a6d7
remove unused usbd dev state
2018-07-13 15:08:38 +07:00
584b6f716d
more clean up
2018-07-13 14:44:44 +07:00
a623f0c179
better multiple interfaces support for cdc device
2018-07-13 00:32:02 +07:00
a4292e5906
changing cdc device to support multiple interface (not yet)
2018-07-12 23:08:54 +07:00
44c494106f
clean up
2018-07-12 22:42:03 +07:00
925c462b72
rename CFG_TUD_ENUM_BUFFER_SIZE to CFG_TUD_CTRL_BUFSIZE
2018-07-12 22:40:22 +07:00
3134d21b24
dropping multiple port device support
2018-07-12 22:25:06 +07:00
ff219f1f01
add CFG_TUD_DESC_AUTO for auto descritpor (device, config)
2018-07-01 15:11:58 +07:00
b9f8575e2d
clean up device cdc
...
separate cdc tx & rx bufsize
2018-06-23 13:19:36 +07:00
d438000b99
clean up
2018-06-22 16:01:55 +07:00
e3591ac682
enhance usbd: add usbd_defer_func()
2018-06-22 12:53:13 +07:00
Ha Thach