8aedb2ff37
slightly change the signature of tuh_control_xfer
2022-03-17 17:25:53 +07:00
66942b814b
change return type of callback to void
2022-03-17 16:55:29 +07:00
deab8c276a
remove const in xfer callback
2022-03-17 16:53:54 +07:00
6df420f7f3
move result into transfer struct
2022-03-17 16:24:43 +07:00
68bfd048a5
change tuh_control_xfer_t struct
2022-03-17 12:53:52 +07:00
98d4ed0584
update hid host to use new control xfer for set config
2022-03-16 18:44:41 +07:00
ceac9d64c0
Disable CFG_TUD_AUDIO_ENABLE_FEEDBACK_DETERMINATION_WITHIN_SOF_ISR
...
By default disable
CFG_TUD_AUDIO_ENABLE_FEEDBACK_DETERMINATION_WITHIN_SOF_ISR such that
current examples still work.
2022-03-16 08:05:31 +01:00
9fde8f2d9e
Fix DSTS_FNSOF in dwc2.c
2022-03-16 07:53:47 +01:00
92ac041869
Add todos and comments
2022-03-16 07:13:38 +01:00
fd2ea2605e
fix -Wnull-dereference warnings
2022-03-16 10:55:18 +07:00
90502739c3
Fix cycle count calculation
2022-03-15 20:45:06 +01:00
c9b444e771
Implement 16.16 fixed point feedback value calculation
2022-03-15 20:30:31 +01:00
26339e694f
Merge remote-tracking branch 'upstream/add-sof-isr' into add-sof-isr
2022-03-14 20:40:57 +01:00
f212899b54
Add SOF callback function for feedback value determination in uac - wip!
2022-03-14 20:40:33 +01:00
41ffd54fa0
Merge branch 'master' into add-sof-isr
2022-03-14 11:57:01 +07:00
2929afe2fa
add synchronous (blocking) support for usbh control transfer
...
- add synchronous version of all get descriptor API
- update bare example to use sync API for string descriptor
- change order of index, language_id in tuh_descriptor_get_string() to
match similar API of libusb
- add index to tuh_descriptor_get_hid_report()
2022-03-13 17:45:46 +07:00
56695569e7
minor changes
2022-03-12 14:28:24 +07:00
ac4483a7c5
misplace fallthrough
2022-03-12 14:26:48 +07:00
a5a565f7eb
rework usbh enumeration process using user arg from control transfer as state
2022-03-12 14:20:57 +07:00
ec28593ce5
update hid,msc to new usbh control API
2022-03-11 22:13:57 +07:00
bcdeb386cc
rework usbh control xfer
...
- change API of tuh_control_xfer and its callback
- rename tuh_control_complete_cb_t to tuh_control_xfer_cb_t
- add user argument to control callback
- migrate usbh and hub
2022-03-11 21:57:55 +07:00
6b5490ced6
merge device_info into bare_api example
2022-03-11 13:12:36 +07:00
a715077b10
remove usbh_control.c
2022-03-11 09:57:35 +07:00
951ece17e1
fix build warning
2022-03-10 23:20:12 +07:00
66c933fb61
fix enumeration issue when plugging hub with multiple devices attached
2022-03-10 23:16:59 +07:00
171d021ab5
refactor and integrate usbh control xfer back to usbh.c
...
fix enumeration with hub when reset port before set address
2022-03-10 22:22:05 +07:00
b9ca301527
remove obsolete device state
2022-03-10 13:19:15 +07:00
5e9f522b9a
refactor host control xfer
2022-03-10 12:56:15 +07:00
b05401a5ab
merge control stage host and device value
2022-03-10 11:59:51 +07:00
97636eff8e
more clean up
2022-03-10 00:36:49 +07:00
0e5e644d27
minor clean up
2022-03-09 17:51:35 +07:00
d56cde33ef
refactor usbd to also use common endpoint claim/release
2022-03-09 17:34:12 +07:00
110879074f
implement tu_edpt_release()
2022-03-09 17:26:55 +07:00
a5fb20533c
adding tusb_private.h to implement common edpt claim
2022-03-09 17:17:36 +07:00
708f05668d
add tusb_debug.h remove tusb_error.h
...
move debug utils to new header
2022-03-09 16:44:19 +07:00
2f593e767c
update use of mutex for host
2022-03-09 12:26:56 +07:00
f920e1c171
rename host descriptor function
2022-03-09 11:21:13 +07:00
db9d97c947
add tuh_descriptor_hid_report_get()
2022-03-09 11:03:29 +07:00
8bf18430b8
Merge pull request #1389 from hathach/fix-1359
...
fix issue 1359
2022-03-08 14:24:22 +07:00
6b2ea2bd1d
fix issue 1359
2022-03-08 13:53:33 +07:00
606f932d92
added dcd_sof_enable() stubs for all other ports
2022-03-07 23:05:05 +07:00
85dbcf5473
implement dcd_sof_enable() for rp2040
2022-03-07 23:04:47 +07:00
707a633de3
added dcd_sof_enable(), tud_sof_isr_set()
...
make number of interface configurable (default to 8)
CFG_TUD_INTERFACE_MAX
2022-03-07 23:03:51 +07:00
ce60e98f6d
remove broadcom/synopssy (repalced by synopsys/dwc2)
2022-03-07 23:00:11 +07:00
7180883fae
Merge pull request #1379 from Qianhao2579/master
...
Modify the wrong macro definition code
2022-03-07 16:09:16 +07:00
1bd31c22e1
Merge pull request #1374 from kasjer/kasjer/stm32wb55
...
stm32wb55 support
2022-03-07 16:09:06 +07:00
a18ac84229
Add support for STM32WB mcu
2022-03-07 09:35:12 +01:00
65bf5ddb1b
Modify the wrong macro definition code
2022-03-07 08:04:49 +00:00
4c6bb161e2
Merge pull request #1289 from kasjer/kasjer/vendor-update
...
vendor: Write improvements
2022-03-06 11:16:35 +07:00
f291243121
Fix string descriptor fetch
2022-03-04 11:38:02 -08:00
8e0b8c15ea
Merge pull request #1369 from tannewt/host_string_desc
...
Add host string descriptor functions
2022-03-04 22:59:16 +07:00
56c2d4b666
fix naming, and build
2022-03-04 22:31:48 +07:00
271f905521
add tuh_descriptor_string_manufacturer/produce/serial_get
2022-03-04 22:23:56 +07:00
15ced09bb2
add tuh_configuration_set()
2022-03-04 21:41:27 +07:00
2bdf4d811a
add tuh_descriptor_configuration_get()
2022-03-04 21:14:59 +07:00
7480c2e46b
correct qhd and qtd count for ehci/ohci
2022-03-04 21:04:52 +07:00
032e2c2929
add CFG_TUH_INTERFACE_MAX config
2022-03-04 19:28:53 +07:00
e08a875d52
add tuh_descriptor_get() and tuh_descriptor_device_get()
2022-03-04 19:26:54 +07:00
3a7d1cfead
minor cleanup
2022-03-04 17:26:21 +07:00
96165a1950
rename HCD_MAX_XFER to CFG_TUH_ENDPOINT_MAX
...
minor clean up
2022-03-04 17:07:04 +07:00
5453c7e97f
Merge pull request #1370 from hathach/fix-esp-idf
...
fix build with esp32s2, also use dwc2 for esp example
2022-03-04 15:20:51 +07:00
f72da8ee7d
fix build with esp32s2, also use dwc2 for esp example
2022-03-04 14:45:26 +07:00
eb6b5d1219
Unused ok
2022-03-03 21:57:44 -08:00
2cd73ca602
Add host string descriptor functions
...
Plus typo fixes, GCC11 array bounds fix, snprintf for malloc-free
debug and pragmas for alignment checks.
2022-03-03 21:53:12 -08:00
fa62d5abc9
got interrupt endpoint working
2022-03-03 21:57:29 +07:00
635fb9dcdd
try to fix ci
2022-03-02 12:33:47 +07:00
918f3e9cae
minor rename
2022-03-02 12:22:20 +07:00
1d29817139
start to add pio usb (host) support
...
run as proof of concept
2022-03-01 23:55:53 +07:00
7c627f58d7
Merge pull request #1343 from Daft-Freak/patch-1
...
Open OUT endpoint for HID host
2022-02-28 20:00:40 +07:00
8e84529c8d
Merge pull request #1345 from alexandre-perrin/iar-cpp-verify-static
...
Fix CPP compilation with IAR
2022-02-28 17:02:33 +07:00
c9b0fbc907
Merge pull request #1354 from hathach/mcu-specific
...
Mcu specific
2022-02-26 21:30:07 +07:00
6dd4d50213
Merge pull request #1352 from ETCLabs/fix-ehci-isr-status-clear-error
...
Updated the clearing of the status register bits to use a straight '=…
2022-02-26 18:05:59 +07:00
f392054e70
Merge pull request #1353 from ETCLabs/iar-compiler-error-on-src-host-usbh.c
...
The IAR compilier does not resolve references to fields in the anonym…
2022-02-26 18:05:35 +07:00
2fe3a925fb
add highspeed detect for f723/730/733
2022-02-26 17:34:29 +07:00
a4ba3f2891
add TUP_USBIP_DWC2
2022-02-26 17:13:06 +07:00
11c89d43ab
more internal rename
2022-02-26 17:06:50 +07:00
bc63f59af2
mcu specific rename
2022-02-26 15:23:29 +07:00
244154e087
Merge pull request #1311 from Wini-Buh/CCRX_Ext
...
Solve problems with CCRX toolchain
2022-02-26 14:34:18 +07:00
c06ecbef0c
The IAR compilier does not resolve references to fields in the anonymous structs defined within the usbh_dev0_t and usbh_device_t structs as they are defined. The problem seems to relate to the placement of the 'volatile' keyword at the struct level. I fixed the problem by removing the 'volatile' from the struct level, and instead placing it on each of the field declarations within the structs.
2022-02-25 16:49:55 -06:00
39fdbc8ffc
Updated the clearing of the status register bits to use a straight '=', rather than an '|='. Use of the latter caused an extra, unwanted read of the status register before the write-to-clear operation, which, in some cases, allowed new status bits to assert (relative to the initial read of the status register two statements earlier), and then be cleared blindly and unconditionally during the write-back. This had the potential (and, in my case, observed) effect of dropping the handling of an enabled interrupt. Ultimately, the system would lock up in a busy state, with no hope of clearing the condition. See Issue #1339 for more information.
2022-02-25 12:39:09 -06:00
5b7a01ba79
Merge pull request #1350 from hathach/enhance-multipl-ports
...
Enhance rhports management
2022-02-26 01:00:07 +07:00
13a4582ce2
Merge pull request #1349 from iabdalkader/fix_inquiry_data
...
Set the standard inquiry response additional length field.
2022-02-26 00:22:55 +07:00
8eeda60bd0
Set the standard inquiry response additional length field.
...
* The standard inquiry response additional length field needs to be set to
the length in bytes of the remaining standard inquiry data (i.e. N - 5),
otherwise the kernel driver issues a warning about short inquiry response..
2022-02-25 18:42:23 +02:00
0997589c45
more symbol rename
2022-02-25 23:05:15 +07:00
89115253da
internal symbol rename
2022-02-25 22:45:05 +07:00
309540473b
minor house keeping
2022-02-25 22:26:35 +07:00
99ad3ae2ca
rename and move dcd_attr.h to tusb_mcu_attr.h
2022-02-25 18:35:21 +07:00
a8af609dfe
auto detect max rhport speed based on mcu
2022-02-25 18:35:21 +07:00
31aa077cb0
rename TUSB_OPT_HOST_ENABLED to CFG_TUH_ENABLED
2022-02-25 18:35:21 +07:00
d10326cb4e
rename TUSB_OPT_DEVICE_ENABLED to CFG_TUD_ENABLED
...
TUSB_OPT_DEVICE_ENABLED still usable for backward compatible
2022-02-25 18:35:21 +07:00
4a5a53b3b8
improve rphort management for usbd
2022-02-25 18:35:21 +07:00
b797d1aa50
Merge pull request #1340 from tannewt/hid_to_cdc
...
Add concurrent host and device example
2022-02-25 18:21:37 +07:00
a8d6e82395
enhance dual role examples
2022-02-25 17:36:05 +07:00
81e33477ea
Fix CPP compilation with IAR
...
IAR defines __STDC_VERSION__ in cpp as well.
Which causes TU_VERIFY_STATIC to be defined as _Static_assert
instead of cpp's static_assert.
This reorders __cplusplus__ to be first, then to fallback to
__STDC_VERSION__ if not CPP.
2022-02-23 18:27:52 +01:00
83b638f230
Open OUT endpoint for HID host
2022-02-23 13:03:20 +00:00
c0a65ba0f6
Support interrupt OUT in RP2040 HCD
2022-02-23 12:25:01 +00:00
566e3abcea
increase version, update doc for release
2022-02-23 11:55:57 +07:00
e04f15ff3d
Merge pull request #1280 from kasjer/kasjer/nrf5x-dma-race
...
nrf5x: Fix DMA access race condition
2022-02-22 21:00:51 +07:00
4612332af7
Merge pull request #1331 from hathach/fix-esp-build
...
fix build with latest esp idf
2022-02-18 16:22:50 +07:00
52645fcc1b
fix build with latest esp idf
2022-02-18 13:07:21 +07:00
a53e83665e
fix HID_REPORT_ID_N()
2022-02-17 12:12:42 +07:00
fcca8bb4ca
Merge pull request #1327 from hathach/msc-request-sense
...
Add msc request sense callback
2022-02-15 23:17:58 +07:00
46f4f7ff49
minor rename set sense function
2022-02-15 22:53:23 +07:00
391edc7afb
msc example response PREVENT_ALLOW_MEDIUM_REMOVAL command as unsupported command
...
LUN1 of msc_disk_dual will be set to not ready to simulate medium not
present (e.g SD card removed)
2022-02-15 22:40:08 +07:00
456c06aa5e
add tud_msc_request_sense_cb() as weak callback
...
set default error sense to NOT READY, Medium not present
2022-02-14 18:17:49 +07:00
63cb3cdc74
Merge pull request #1304 from kkitayam/add_hcd_for_frdm_kl25z
...
Add hcd driver for frdm kl25z
2022-02-09 16:14:50 +07:00
5414cf275b
Merge branch 'hathach:master' into CCRX_Ext
2022-02-02 21:06:37 +01:00
d6fb1859a4
Merge pull request #1291 from kasjer/kasjer/da1469x-fix-resume
...
da1469x: fix resume
2022-02-02 20:20:39 +07:00
7beb92864e
Merge branch 'CCRX_Ext' of https://github.com/Wini-Buh/tinyusb into CCRX_Ext
2022-02-01 23:49:20 +01:00
e1f0c484c6
Modifications for CCRX toolchain
2022-02-01 23:45:52 +01:00
453ba529a6
OHCI: Fix array out of bounds issue
...
If using a USB hub, a request outside the array size can occur
Original line:
ffb257ac17/src/portable/ohci/ohci.h (L162)ffb257ac17/src/portable/ohci/ohci.c (L460)
2022-01-28 14:02:34 +10:30
03d2e32dc1
Fix handling for pending transfers
2022-01-27 23:38:19 +09:00
60a0be82da
Change hcd_edpt_xfer to send at the next SOF
2022-01-27 22:25:36 +09:00
cc06a3585e
Add handling for NAK response
2022-01-27 20:57:41 +09:00
cdab869472
Fix handling control transfer
2022-01-27 20:57:41 +09:00
a4bc6075ce
Add HCD functions for KL25Z
2022-01-27 20:57:40 +09:00
578a123282
fix mynewt build sunxi
2022-01-26 12:59:53 +07:00
7de166390e
Merge branch 'master' into master
2022-01-25 22:29:05 +07:00
7b078367e8
dcd_da1469x: Re-enable RX after resume
...
Going to suspend states disable reception on non-0 RX endpoints.
Now when USB resume condition is detected, all RX endpoints
with pending transfers are resumed.
2022-01-20 16:28:09 +01:00
ae4d901d83
dcd_da1469x: Fix over-run/under-run mask
...
Bit mask enabling/disabling over-run/unde-run was shifted
by one nibble, so interrupt was never enabled.
It did not force any issue as this situation could only
happen on ISO endpoints without DMA.
2022-01-20 10:01:18 +01:00
4ca2215684
vendor: Add tx flush functionality
...
So far tud_vendor_n_write() always flushed data.
It requires to have whole vendor packed constructed
before in one buffer.
With this change data do get flushed when endpoint size
is filled on write, when there is no enough data to
fill endpoint data is not sent and subsequent calls to
write functions can add more bytes.
Vendor code needs to call tud_vendor_n_flush() when packet is
ready to be sent.
2022-01-19 15:08:12 +01:00
d069ea1421
vendor: Add tx callback
...
Other drivers already have notification about data sent.
It allows batter control in application on vendor
protocol level.
2022-01-19 14:06:00 +01:00
e40547ada1
Merge pull request #1265 from kkitayam/add_hcd_for_renesas_rx
...
Add HCD driver for Renesas RX
2022-01-19 19:07:21 +07:00
36b6ed8ff9
nrf5x: Fix EP OUT race conditions in OS build
...
When two tasks entered dcd_edpt_xfer() it was possible that
first disabled interrupt to setup total_len and actual_len
but second task for another endpoint enabled interrupt
between total_len and actual_len resulting in race
condition with interrupt, hence mutex is added on top of interrupt being blocked.
2022-01-19 09:48:04 +01:00
980ffe3b4e
nrf5x: Fix DMA access race condition
...
In multi-thread mode starting DMA in thread mode was
prone to race condition resulting in infinite loop.
It may happen on single core CPU with strict priority based
tasks scheduler where ready high prio task never yields to
ready low prio task (Mynewt).
Sequence that failed (T1 - low priority task, T2 - high priority task)
- T1 called start_dma()
- T1 set _dcd.dma_running (DMA not started yet, context switch happens)
- T2 took CPU and saw that _dcd.dma_running is set, so waits for _dcd.dma_running to be 0
- T1 never gets CPU again, DMA is not started T2 waits forever
OSAL mutex resolves problem of DMA starting from thread-context.
2022-01-19 09:06:43 +01:00
af9a3f646c
fix idfgh-6508: return type in tu_fifo_peek_n()
...
https://github.com/espressif/esp-idf/issues/8161
2022-01-19 09:00:43 +01:00
0b6b4f2441
Merge pull request #1286 from hathach/fix-fifo-mutex-when-full
...
fix locked mutex when fifo is full
2022-01-19 10:45:33 +07:00
983abfd6d8
Merge pull request #1279 from kasjer/kasjer/nrf5x-int-race
...
nrf5x: Fix EP OUT race conditions
2022-01-19 10:33:37 +07:00
161ba73c8b
fix locked mutex when fifo is full
2022-01-19 10:17:39 +07:00
84f2ca77f7
Merge pull request #1283 from kasjer/kasjer/olimex-pic32-board-fixes
...
olimex pic32 board fixes
2022-01-19 09:55:18 +07:00
92c36f187d
Merge pull request #1274 from kasjer/kasjer/nrf5x-request-clock-in-mynewt
...
nrf5x: Request HFXO via OS
2022-01-18 20:00:23 +07:00
f4725120a4
nrf5x: Request HFXO via OS
...
Mynewt (similar to Soft Device) has its own reference counting for
HFXO oscillator.
So far TinyUSB requested HFXO when VBUS was detected and stopped when
VBUS was removed.
But with Mynewt running HFXO can be stopped when other interested parties
don't require HFXO anymore. This results in very difficult to track
USB transmission errors.
This change enables Mynewt specific HFXO management in Soft Device fashion.
2022-01-18 08:12:49 +01:00
168c7095e8
pic32mz: Fix remote_wakeup without OS
...
Remote wakeup requires 10ms of delay when RESUME bit
is toggled.
It was covered for OS build.
For non-OS build simple delay based on board_millis() is
used to wait required amount of time.
Without this remote wakup may not work.
2022-01-17 17:59:51 +01:00
ec01428820
ft9xx: Fix Mynewt build
...
Includes were moved few lines down to restore build with Mynewt build system.
2022-01-17 09:14:41 +01:00
efc29baead
Merge branch 'master' into port-ft90x
2022-01-17 12:36:39 +07:00
976405dea3
Merge pull request #1270 from kasjer/kasjer/pic32mz
...
Driver for Microchip PIC32MZ family
2022-01-16 20:24:14 +07:00
c722133671
change OPT_MCU_PIC32MZ to value of 1900
2022-01-16 15:38:23 +07:00
45fb60e883
update format correction with actual bus speed
2022-01-16 12:12:57 +07:00
da44fe3fc9
nrf5x: Fix EP OUT race conditions
...
When dcd_edpt_xfer() starts new transfer two separate problems were observed.
For both problems stream of OUT packets was pouring from host.
First problem was that total_len and actual_len were not atomic.
In case where incoming OUT packets are less (63) than MPS (64), actual_len and total_len
are set 63.
Then transfer complete from USBD is called that will schedule next 64 bytes transfer.
At that point incoming packet would start DMA if there is place in RAM, normally
it does not happen since actual_len == total_len.
If packets arrives and interrupt is raised after total_len is set (64) but actual_len is still 63 from
previous transfer, interrupt code sees that there is place in ram (1 byte) and transfer this 1 byte
to buffer that was already filled with previous packet.
To remedy this USB interrupt is blocked during transfer setup.
Second problem can happen when dcd_edpt_xfer setups xfer->total_len and actual_len correctly
but then context switch happens before xfer->data_received is checked.
If during this time two packets arrive one will be copied to RAM second will stay in endpoint with
data_received set to 1.
Then when xfer_edpt_xfer() checks data_receive flag it starts DMA again overwriting data.
To remedy this, data_received is checked together with check if data was already transferred.
If transfer was complete, there is no need to start DMA yet.
In such case data_received will be handled in same place by next xfer_edpt_xfer() correctly.
2022-01-14 09:46:39 +01:00
340309561d
Add driver for PIC32MZ MCUs
...
Device-only driver for PIC32MZ MCUs.
2022-01-07 14:12:42 +01:00
c2533a45bd
Merge branch 'master' into feature/feedback_format
2022-01-07 15:12:07 +02:00
a284e438f1
Disable feedback format correction by default #1234
2022-01-07 15:02:52 +02:00
44406a8940
Enable breakpoints for ARM8M (e.g. cortex-m33)
2022-01-06 09:56:45 +01:00
47218eeb67
No exceptions on broadcom. Add parens to if
2022-01-05 16:07:17 -08:00
a79ffeb764
Add Raspberry Pi Zero W and Zero 2 W
...
These are different Broadcom chips. The peripherals are essentially
the same. The main differences are:
* The CPU(s)
* The interrupt controller
* The peripheral base address (but not the peripherals that we use)
2022-01-05 13:47:01 -08:00
2f69649bb6
Add register file for Microchip PIC32MZ
2021-12-31 22:53:27 +01:00
c5d2c82cbb
fix unreachable warnings with keil
2021-12-30 20:59:53 +07:00
adb848f754
update docs
2021-12-29 19:42:34 +07:00
5f280b3029
add license to dcd file, slightly update readme
2021-12-29 19:25:32 +07:00
30aba24ddc
Merge branch 'master' of https://github.com/t123yh/tinyusb into t123yh-master
2021-12-29 18:27:29 +07:00
2b8b8a3a97
Fix hcd_edpt_clear_stall
2021-12-27 22:55:28 +09:00
2c0fcc2fa7
Add statements for control VBUS
2021-12-27 21:36:49 +09:00
a76799b085
Add hcd for Renesas RX
2021-12-27 21:19:02 +09:00
7a596b9e55
Fix Mynewt build for Microchip PIC32MZ devices.
...
definition of DEBUG breaks Microchip pic32 builds for Mynewt.
When MCU is not VALENTYUSB_EPTRI there is no need to have any
preprocessor definitions.
It may not look like a big deal but for xc32 builds, compiler
automatically force-includes some file that have structure with field name
DEBUG that result in build error in dcd_eptri.c when this file
is not really needed.
Moving DEBUG and LOG_USB few lines down should not break eptri builds.
2021-12-27 10:14:38 +01:00
8d373b0887
Update midi_test endpoints and FT9xx code
2021-12-15 12:23:58 +00:00
bfb5e32e1f
Merge pull request #1233 from vmilea/rp2040_bugfix/ep_close
...
Handle the closing of endpoints on RP2040
2021-12-09 23:38:17 +07:00
6bf7fba2a4
Merge pull request #1221 from kasjer/kasjer/fix-nrf5x-vbus-race-condition
...
nrf5x: Fix race condition during startup
2021-12-09 00:44:44 +07:00
ae970ba2e2
Handle xfer events before closing EP
2021-12-08 12:34:00 +02:00
5039a5e54c
Update code to implement changes from upstream master
2021-12-08 09:34:29 +00:00
9a7db98593
Merge branch 'master' into port-ft90x
2021-12-08 08:36:43 +00:00
21db2351fd
nrf5x: Fix race condition during startup
...
When NRF5x device is reset by software (after DFU for example),
power event is ready from the beginning.
When power interrupt is triggered before tud_init() finished
USBD_IRQn is enabled before it would be enabled in tud_init().
This in turn may result in BUS RESET event being sent from
USB interrupt to USB task when queue is not initialized yet.
This scenario often happens in Mynewt build where queue creation
takes more time.
To prevent this scenario USBD_IRQn is not enabled in power event
interrupt handler before dcd_init() was called.
2021-12-08 08:27:27 +01:00
36e69b86bf
Remove buffer reclaim logs
2021-12-07 15:35:30 +02:00
c157837878
Merge pull request #1213 from kkitayam/add_hcd_for_msp_exp432e401y
...
Add a HCD driver for MSP-EXP432E401Y
2021-12-07 19:24:41 +07:00
ef879e8a8a
Support disabling feedback format correction #1234
2021-12-06 18:49:58 +02:00
96979a2c4a
Fix handling of RXRDY bit
2021-12-06 19:56:27 +08:00
1ffc366aa9
Change FIFO size to 4KB (not sure)
...
The datasheet says 2KB FIFO, but accroding to many
code examples, the F1C100s has at least 4KB of FIFO memory.
This is working with cdc_msc example,
but I'm not sure, this should be checked.
2021-12-05 22:40:05 +08:00
f308603a3a
Fix a typo that leads to incorrect RX handling
2021-12-05 22:31:09 +08:00
702698ee29
Add FIFO size check
2021-12-05 18:18:41 +08:00
64b81fd4d3
Close all EPs upon reset
2021-12-05 18:08:01 +08:00
fa0e4d91f9
Save current EP before querying other EPs
2021-12-05 18:07:35 +08:00
48e1f6d899
Handle the closing of endpoints on RP2040
2021-12-04 16:04:48 +02:00
68ca62dfd7
Add BSP support for F1C100s
2021-12-04 18:02:07 +08:00
dff54d854d
Modify sunxi_musb code
2021-12-04 17:18:39 +08:00
7137a0a92f
Fix buffer overrun at pipe_read_packet()
2021-12-04 01:25:34 +09:00
81285273a6
Fix memory overrun at pipe_read_packet()
2021-12-04 01:18:42 +09:00
6ecd93eb60
Merge branch 'master' into add_hcd_for_msp_exp432e401y
2021-12-03 00:30:09 +07:00
207c60d055
more chipidea
2021-12-02 00:03:44 +07:00
83dc3e25f0
more work to abstract chipidea driver
2021-12-01 23:30:09 +07:00
61a9e125db
more ci abstract
2021-12-01 23:19:17 +07:00
bb7d1fa3ba
Add support for Allwinner F1Cx00s family
...
Allwinner F1Cx00s family is a series of SoCs
with Mentor MUSB controller and HS phy. It comes
with a slightly different register space layout,
and some quirks, so it's not multiplexed with
the existing musb support library.
This library currently requires to be compiled
with https://github.com/hongxuyao/F1C100s_with_Keil_RTX4_emWin5
2021-12-01 15:35:48 +08:00
0612433eef
add chipidea highspeed controller
...
add warning to transdimension for the rename
2021-12-01 12:14:44 +07:00
9bccc8068b
Add register settings to handle a HUB
2021-11-30 23:13:20 +09:00
3e3fe1e429
improve hcd_device_close() for rp2040
2021-11-30 17:36:52 +07:00
006522e437
on unplug release device endpoints
2021-11-30 17:17:06 +07:00
06f99c220e
implement hcd device close
2021-11-30 17:17:06 +07:00
a6929cf03e
Add support for Keil RTX4 OS abstraction layer
2021-11-30 17:19:11 +08:00
ac20605e3f
Ignore certain compiler options on ARMCC
...
ARMCC also sets __GNU__ macro, but doesn't support
GCC diagnostic pragmas.
2021-11-30 17:19:11 +08:00
dba59217da
usbd: supress "statement is unreachable" warning on ARMCC
2021-11-30 17:19:10 +08:00
ab223eb1df
correct 32 button in gamepad hid descriptor template
2021-11-29 13:07:46 +07:00
b50cf856b3
Add hcd_musb.c
2021-11-29 00:28:22 +09:00
7413b6b020
Add a compile condition for dcd
2021-11-27 10:26:32 +09:00
c9e9f4785f
more clean up
2021-11-23 09:52:11 +07:00
0fc11746c0
clean up
2021-11-23 09:46:45 +07:00
a994540860
fix nrf easy dma race condition
2021-11-23 09:36:28 +07:00
b8d66e4d19
Merge pull request #1206 from hathach/bcm-dwc2-address
...
Bcm dwc2 address
2021-11-22 12:07:07 +07:00
dac7574c98
use USB_OTG_GLOBAL_BASE instead of hard code value
2021-11-22 10:52:28 +07:00
301d6b4133
clean up
2021-11-17 09:48:08 +07:00
12e96ce571
set DCFG_XCVRDLY when using external ULPI highspeed phy
2021-11-15 12:18:28 +07:00
d415bd4d7b
add missing musb type file
2021-11-08 17:39:37 +07:00
f65917f51a
rename to simply OPT_MCU_MSP432E4, add msp432e to ci
2021-11-08 17:29:26 +07:00
hathach