esp32-s2_dfu/src/portable/raspberrypi/rp2040/rp2040_usb.h

#ifndef RP2040_COMMON_H_
#define RP2040_COMMON_H_

#if defined(RP2040_USB_HOST_MODE) && defined(RP2040_USB_DEVICE_MODE)
#error TinyUSB device and host mode not supported at the same time
#endif

#include "common/tusb_common.h"

#include "pico.h"
#include "hardware/structs/usb.h"
#include "hardware/irq.h"
#include "hardware/resets.h"

#if defined(PICO_RP2040_USB_DEVICE_ENUMERATION_FIX) && !defined(TUD_OPT_RP2040_USB_DEVICE_ENUMERATION_FIX)
#define TUD_OPT_RP2040_USB_DEVICE_ENUMERATION_FIX PICO_RP2040_USB_DEVICE_ENUMERATION_FIX
#endif


#define pico_info(...)  TU_LOG(2, __VA_ARGS__)
#define pico_trace(...) TU_LOG(3, __VA_ARGS__)

// Hardware information per endpoint
struct hw_endpoint
{
    // Is this a valid struct
    bool configured;
    
    // Transfer direction (i.e. IN is rx for host but tx for device)
    // allows us to common up transfer functions
    bool rx;
    
    uint8_t ep_addr;
    uint8_t next_pid;

    // Endpoint control register
    io_rw_32 *endpoint_control;

    // Buffer control register
    io_rw_32 *buffer_control;

    // Buffer pointer in usb dpram
    uint8_t *hw_data_buf;

    // Have we been stalled
    bool stalled;

    // Current transfer information
    bool active;
    uint16_t remaining_len;
    uint16_t xferred_len;

    // User buffer in main memory
    uint8_t *user_buf;

    // Data needed from EP descriptor
    uint16_t wMaxPacketSize;
    // Interrupt, bulk, etc
    uint8_t transfer_type;
    
#if TUSB_OPT_HOST_ENABLED
    // Only needed for host
    uint8_t dev_addr;
    bool sent_setup;
    // If interrupt endpoint
    uint8_t interrupt_num;
#endif
};

void rp2040_usb_init(void);

void hw_endpoint_xfer_start(struct hw_endpoint *ep, uint8_t *buffer, uint16_t total_len);
bool hw_endpoint_xfer_continue(struct hw_endpoint *ep);
void hw_endpoint_reset_transfer(struct hw_endpoint *ep);

void _hw_endpoint_buffer_control_update32(struct hw_endpoint *ep, uint32_t and_mask, uint32_t or_mask);
static inline uint32_t _hw_endpoint_buffer_control_get_value32(struct hw_endpoint *ep) {
    return *ep->buffer_control;
}
static inline void _hw_endpoint_buffer_control_set_value32(struct hw_endpoint *ep, uint32_t value) {
    return _hw_endpoint_buffer_control_update32(ep, 0, value);
}
static inline void _hw_endpoint_buffer_control_set_mask32(struct hw_endpoint *ep, uint32_t value) {
    return _hw_endpoint_buffer_control_update32(ep, ~value, value);
}
static inline void _hw_endpoint_buffer_control_clear_mask32(struct hw_endpoint *ep, uint32_t value) {
    return _hw_endpoint_buffer_control_update32(ep, ~value, 0);
}

static inline uintptr_t hw_data_offset(uint8_t *buf)
{
    // Remove usb base from buffer pointer
    return (uintptr_t)buf ^ (uintptr_t)usb_dpram;
}

extern const char *ep_dir_string[];

typedef union TU_ATTR_PACKED
{
  uint16_t u16;
  struct TU_ATTR_PACKED
  {
    uint16_t xfer_len     : 10;
    uint16_t available    : 1;
    uint16_t stall        : 1;
    uint16_t reset_bufsel : 1;
    uint16_t data_toggle  : 1;
    uint16_t last_buf     : 1;
    uint16_t full         : 1;
  };
} rp2040_buffer_control_t;

TU_VERIFY_STATIC(sizeof(rp2040_buffer_control_t) == 2, "size is not correct");

#if CFG_TUSB_DEBUG >= 3
static inline void print_bufctrl16(uint32_t u16)
{
  rp2040_buffer_control_t bufctrl = {
      .u16 = u16
  };

  TU_LOG(3, "len = %u, available = %u, stall = %u, reset = %u, toggle = %u, last = %u, full = %u\r\n",
         bufctrl.xfer_len, bufctrl.available, bufctrl.stall, bufctrl.reset_bufsel, bufctrl.data_toggle, bufctrl.last_buf, bufctrl.full);
}

static inline void print_bufctrl32(uint32_t u32)
{
  uint16_t u16;

  u16 = u32 >> 16;
  TU_LOG(3, "  Buffer Control 1 0x%x: ", u16);
  print_bufctrl16(u16);

  u16 = u32 & 0x0000ffff;
  TU_LOG(3, "  Buffer Control 0 0x%x: ", u16);
  print_bufctrl16(u16);
}

#else

#define print_bufctrl16(u16)
#define print_bufctrl32(u32)

#endif

#endif