45 lines
1.5 KiB
Markdown
45 lines
1.5 KiB
Markdown
v2
|
|
--
|
|
|
|
fixes:
|
|
|
|
- ESP antenna not surrounded by copper
|
|
|
|
changes:
|
|
|
|
- use larger barrier terminal for power ports to carry more current, clamp more wires, and allow wiring when the board is mounted in the enclosure
|
|
- remove 5V jack to save space, and 5V power can be provided by USB port
|
|
- add board hole to fit in other enclosure version
|
|
- use ESP32-S2-MINI instead of WROOM to save space and avoid Not Recommended for New Design part
|
|
- use top spring terminal for LED data wires so they can be inserted when the board is mounted in the enclosure
|
|
- add status LED and change LED meanings
|
|
- complete re-layout
|
|
|
|
v1
|
|
--
|
|
|
|
fixes:
|
|
|
|
- both pins of the spring terminals are connected
|
|
|
|
changes:
|
|
|
|
- use screw terminal for power input/output to support more current
|
|
- add power input protection: PPTC and reverse polarity
|
|
- add switch configure DMX512 line termination (loop back to D2 so the XLR chain can continue, end using a termination resistor, or continue forwarding to other port
|
|
- change DC-DC buck converter to TPS54560 for large input voltage (e.g. 48V power supply and batteries)
|
|
|
|
issues: all the same as v0
|
|
|
|
v0
|
|
--
|
|
|
|
first prototype, with the bare features
|
|
|
|
issues:
|
|
|
|
- the case has actually other mounting holes
|
|
- WiFi does not work because of missing [copper clearance around the antenna](https://espressif.com/sites/default/files/documentation/esp32-s2_hardware_design_guidelines_en.pdf).
|
|
- KF141R footprint is not long enough (not really an issue)
|
|
- LED cables need to be stripped ~ 10 mm to fit it KF141R (minor inconvenience)
|