doc: improve LED description
This commit is contained in:
parent
ffe712138e
commit
272599956c
|
@ -67,9 +67,9 @@ Take this into account when reusing this power rails from the WLED chain.
|
|||
The yellow LED on the RJ45 port lights on when power is available on VIN.
|
||||
The green LED on the RJ45 port light on when the electronic on the board is powered, using the on-board DC to DC buck regulator to 5V.
|
||||
|
||||
The blue LED on the center of the board blinks upon DMX512 traffic from the XLR port to RJ45.
|
||||
The red LED on the center of the board blinks upon RDM traffic from the RJ45 port to XLR.
|
||||
The green LED in the corner of the board turns on when RDM support is active.
|
||||
The blue DMX LED on the center of the board blinks upon DMX512 traffic from the XLR port to RJ45.
|
||||
The red RDM LED on the center of the board blinks upon RDM traffic from the RJ45 port to XLR.
|
||||
The green RUN LED in the corner of the board turns on when RDM support is active.
|
||||
|
||||
The board can be mounted in waterproof enclosures (for [sonoff](https://www.sonoffegypt.com/products/sonoff-ip66-waterproof-case) or generic [100x68x50 mm](https://www.aliexpress.com/item/1005005622148025.html)).
|
||||
You can drill holes on the side of the box to get access to the XLR and barrel port.
|
||||
|
|
Loading…
Reference in New Issue