From 272599956c200240104cc20bcf804761b6897398 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?King=20K=C3=A9vin?= Date: Tue, 19 Dec 2023 19:08:30 +0100 Subject: [PATCH] doc: improve LED description --- README.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/README.md b/README.md index 9be1324..d2b41bf 100644 --- a/README.md +++ b/README.md @@ -67,9 +67,9 @@ Take this into account when reusing this power rails from the WLED chain. The yellow LED on the RJ45 port lights on when power is available on VIN. The green LED on the RJ45 port light on when the electronic on the board is powered, using the on-board DC to DC buck regulator to 5V. -The blue LED on the center of the board blinks upon DMX512 traffic from the XLR port to RJ45. -The red LED on the center of the board blinks upon RDM traffic from the RJ45 port to XLR. -The green LED in the corner of the board turns on when RDM support is active. +The blue DMX LED on the center of the board blinks upon DMX512 traffic from the XLR port to RJ45. +The red RDM LED on the center of the board blinks upon RDM traffic from the RJ45 port to XLR. +The green RUN LED in the corner of the board turns on when RDM support is active. The board can be mounted in waterproof enclosures (for [sonoff](https://www.sonoffegypt.com/products/sonoff-ip66-waterproof-case) or generic [100x68x50 mm](https://www.aliexpress.com/item/1005005622148025.html)). You can drill holes on the side of the box to get access to the XLR and barrel port.