STM32F1xx micro-controller C firmware template
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

71 lines
3.3 KiB

/* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <>.
/** library to drive a WS2812B LED chain (API)
* @file led_ws2812b.h
* @author King Kévin <>
* @date 2016
* @note peripherals used: SPI @ref led_ws2812b_spi, timer @ref led_ws2812b_timer, DMA @ref led_ws2812b_dma
#pragma once
/** number of LEDs on the WS2812B strip */
#define LED_WS2812B_LEDS 48
/** peripheral configuration */
/** @defgroup led_ws2812b_spi SPI peripheral used to control the WS2812B LEDs
* @{
#define LED_WS2812B_SPI SPI1 /**< SPI peripheral */
#define LED_WS2812B_SPI_DR SPI1_DR /**< SPI data register for the DMA */
#define LED_WS2812B_SPI_RCC RCC_SPI1 /**< SPI peripheral clock */
#define LED_WS2812B_SPI_PORT_RCC RCC_GPIOA /**< SPI I/O peripheral clock */
#define LED_WS2812B_SPI_PORT GPIOA /**< SPI port */
#define LED_WS2812B_SPI_CLK GPIO_SPI1_SCK /**< SPI clock pin (PA5), connect to PWM output */
#define LED_WS2812B_SPI_DOUT GPIO_SPI1_MISO /**< SPI data pin (PA6), connect to WS2812B DIN */
/** @} */
/** @defgroup led_ws2812b_timer timer peripheral used to generate SPI clock
* @{
#define LED_WS2812B_TIMER TIM3 /**< timer peripheral */
#define LED_WS2812B_TIMER_RCC RCC_TIM3 /**< timer peripheral clock */
#define LED_WS2812B_TIMER_OC TIM_OC3 /**< timer output compare used to set PWM frequency */
#define LED_WS2812B_CLK_RCC RCC_GPIOB /**< timer port peripheral clock */
#define LED_WS2812B_CLK_PORT GPIOB /**< timer port */
#define LED_WS2812B_CLK_PIN GPIO_TIM3_CH3 /**< timer pin to output PWM (PB0), connect to SPI clock input */
/** @} */
/** @defgroup led_ws2812b_dma DMA peripheral used to send the data
* @{
#define LED_WS2812B_DMA DMA1 /**< DMA peripheral to put data for WS2812B LED in SPI queue (only DMA1 supports SPI1_TX interrupt) */
#define LED_WS2812B_DMA_RCC RCC_DMA1 /**< DMA peripheral clock */
#define LED_WS2812B_DMA_CH DMA_CHANNEL3 /**< DMA channel (only DMA1 channel 3 supports SPI1_TX interrupt) */
#define LED_WS2812B_DMA_IRQ NVIC_DMA1_CHANNEL3_IRQ /**< DMA channel interrupt signal */
#define LED_WS2812B_DMA_ISR dma1_channel3_isr /**< DMA channel interrupt service routine */
/** @} */
/** setup WS2812B LED driver */
void led_ws2812b_setup(void);
/** set color of a single LED
* @param[in] led the LED number to set the color
* @param[in] red the red color value to set on the LED
* @param[in] green the green color value to set on the LED
* @param[in] blue the blue color value to set on the LED
* @note transmission needs to be done separately
void led_ws2812b_set_rgb(uint16_t led, uint8_t red, uint8_t green, uint8_t blue);
/** transmit color values to WS2812B LEDs
* @return true if transmission started, false if another transmission is already ongoing
bool led_ws2812b_transmit(void);