31 lines
1.5 KiB
Plaintext
31 lines
1.5 KiB
Plaintext
/* linker script for application running on STM32F103x8 micro-controller
|
|
* the STM32F103x8 has 64 KB of flash starting at 0x0800 0000, and 20 KB of RAM starting at 0x2000 0000
|
|
* the STM32F103xB has 128 KB of flash starting at 0x0800 0000, and 20 KB of RAM starting at 0x2000 0000
|
|
* STM32F103x8 most often have if fact 128 KB, instead of the specified and advertised 64 KB, like the STM32F103xB
|
|
* you can define the desired flash size here.
|
|
* the USB DFU bootloader will take the first 8 KB of flash, followed by the application
|
|
* the first 4 bytes of the RAM is reserved for the DFU magic word (DFU! to start DFU bootloader)
|
|
*/
|
|
|
|
/* define memory regions. */
|
|
MEMORY
|
|
{
|
|
rom (rx) : ORIGIN = 0x08000000, LENGTH = 8K
|
|
ram (rwx) : ORIGIN = 0x20000000 + 4, LENGTH = 20K - 4
|
|
}
|
|
PROVIDE(__application_beginning = ORIGIN(rom) + LENGTH(rom));
|
|
/* if you want the firmware to use the flash size advertised by the micro-controller itself, use the following:
|
|
PROVIDE(__application_end = 0);
|
|
PROVIDE(__flash_end = 0);
|
|
if you want to enforce a flash size, because there is more flash than advertized by the micro-controller, use to following:
|
|
PROVIDE(__application_end = ORIGIN(rom) + LENGTH(rom));
|
|
PROVIDE(__flash_end = ORIGIN(rom) + LENGTH(rom));
|
|
*/
|
|
PROVIDE(__application_end = ORIGIN(rom) + 128K);
|
|
PROVIDE(__flash_end = ORIGIN(rom) + 128K);
|
|
/* RAM location reserved so application can talk to bootloader and tell to start DFU */
|
|
PROVIDE(__dfu_magic = ORIGIN(ram) - 4);
|
|
|
|
/* include rest of the definitions for the ARM Cortex-M, including STM32F1 family */
|
|
INCLUDE cortex-m-generic.ld
|