392 lines
14 KiB
C
392 lines
14 KiB
C
/* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
/** library to communicate using I2C as master (code)
|
|
* @file i2c_master.c
|
|
* @author King Kévin <kingkevin@cuvoodoo.info>
|
|
* @date 2017-2018
|
|
* @note peripherals used: I2C @ref i2c_master_i2c, timer @ref i2c_master_timer
|
|
*/
|
|
|
|
/* standard libraries */
|
|
#include <stdint.h> // standard integer types
|
|
//#include <stdio.h> // standard I/O facilities
|
|
#include <stdlib.h> // general utilities
|
|
|
|
/* STM32 (including CM3) libraries */
|
|
#include <libopencm3/stm32/rcc.h> // real-time control clock library
|
|
#include <libopencm3/stm32/gpio.h> // general purpose input output library
|
|
#include <libopencm3/stm32/i2c.h> // I2C library
|
|
#include <libopencm3/stm32/timer.h> // timer utilities
|
|
|
|
/* own libraries */
|
|
#include "global.h" // global utilities
|
|
#include "i2c_master.h" // I2C header and definitions
|
|
|
|
/** @defgroup i2c_master_i2c I2C peripheral used to communicate
|
|
* @{
|
|
*/
|
|
#define I2C_MASTER_I2C 1 /**< I2C peripheral */
|
|
/** @} */
|
|
|
|
/** @defgroup i2c_master_timer timer peripheral used for timeouts
|
|
* @{
|
|
*/
|
|
#define I2C_MASTER_TIMER 4 /**< timer peripheral */
|
|
#define I2C_MASTER_TIMEOUT 4 /**< timeout factor (compared to expected time) */
|
|
/** @} */
|
|
|
|
void i2c_master_setup(bool fast)
|
|
{
|
|
// configure I2C peripheral
|
|
rcc_periph_clock_enable(RCC_I2C_SCL_PORT(I2C_MASTER_I2C)); // enable clock for I2C I/O peripheral
|
|
gpio_set(I2C_SCL_PORT(I2C_MASTER_I2C), I2C_SCL_PIN(I2C_MASTER_I2C)); // already put signal high to avoid small pulse
|
|
gpio_set_mode(I2C_SCL_PORT(I2C_MASTER_I2C), GPIO_MODE_OUTPUT_2_MHZ, GPIO_CNF_OUTPUT_ALTFN_OPENDRAIN, I2C_SCL_PIN(I2C_MASTER_I2C)); // setup I2C I/O pins
|
|
rcc_periph_clock_enable(RCC_I2C_SCL_PORT(I2C_MASTER_I2C)); // enable clock for I2C I/O peripheral
|
|
gpio_set(I2C_SDA_PORT(I2C_MASTER_I2C), I2C_SDA_PIN(I2C_MASTER_I2C)); // already put signal high to avoid small pulse
|
|
gpio_set_mode(I2C_SDA_PORT(I2C_MASTER_I2C), GPIO_MODE_OUTPUT_2_MHZ, GPIO_CNF_OUTPUT_ALTFN_OPENDRAIN, I2C_SDA_PIN(I2C_MASTER_I2C)); // setup I2C I/O pins
|
|
rcc_periph_clock_enable(RCC_AFIO); // enable clock for alternate function
|
|
rcc_periph_clock_enable(RCC_I2C(I2C_MASTER_I2C)); // enable clock for I2C peripheral
|
|
i2c_reset(I2C(I2C_MASTER_I2C)); // reset configuration
|
|
i2c_peripheral_disable(I2C(I2C_MASTER_I2C)); // I2C needs to be disable to be configured
|
|
i2c_set_clock_frequency(I2C(I2C_MASTER_I2C), rcc_apb1_frequency/1000000); // configure the peripheral clock to the APB1 freq (where it is connected to)
|
|
if (fast) {
|
|
i2c_set_fast_mode(I2C(I2C_MASTER_I2C));
|
|
i2c_set_ccr(I2C(I2C_MASTER_I2C), rcc_apb1_frequency/(400000*2)); // set Thigh/Tlow to generate frequency of 400 kHz
|
|
i2c_set_trise(I2C(I2C_MASTER_I2C), (300/(1000/(rcc_apb1_frequency/1000000)))+1); // max rise time for 300 kHz is 300 ns
|
|
} else {
|
|
i2c_set_standard_mode(I2C(I2C_MASTER_I2C)); // the DS1307 has a maximum I2C SCL freq if 100 kHz (corresponding to the standard mode)
|
|
i2c_set_ccr(I2C(I2C_MASTER_I2C), rcc_apb1_frequency/(100000*2)); // set Thigh/Tlow to generate frequency of 100 kHz
|
|
i2c_set_trise(I2C(I2C_MASTER_I2C), (1000/(1000/(rcc_apb1_frequency/1000000)))+1); // max rise time for 100 kHz is 1000 ns (~1 MHz)
|
|
}
|
|
i2c_peripheral_enable(I2C(I2C_MASTER_I2C)); // enable I2C after configuration completed
|
|
|
|
// configure time for timeouts
|
|
rcc_periph_clock_enable(RCC_TIM(I2C_MASTER_TIMER)); // enable clock for timer block
|
|
timer_reset(TIM(I2C_MASTER_TIMER)); // reset timer state
|
|
timer_set_mode(TIM(I2C_MASTER_TIMER), TIM_CR1_CKD_CK_INT, TIM_CR1_CMS_EDGE, TIM_CR1_DIR_UP); // set timer mode, use undivided timer clock, edge alignment (simple count), and count up
|
|
timer_one_shot_mode(TIM(I2C_MASTER_TIMER)); // stop counter after update event (we only need to one timeout and reset before next operation)
|
|
if (fast) {
|
|
timer_set_prescaler(TIM(I2C_MASTER_TIMER), rcc_ahb_frequency/400000-1); // set the prescaler so one tick is also one I2C bit (used I2C frequency)
|
|
} else {
|
|
timer_set_prescaler(TIM(I2C_MASTER_TIMER), rcc_ahb_frequency/100000-1); // set the prescaler so one tick is also one I2C bit (used I2C frequency)
|
|
}
|
|
timer_set_period(TIM(I2C_MASTER_TIMER), I2C_MASTER_TIMEOUT*9); // use factor to wait for all 9 bits to be transmitted
|
|
timer_update_on_overflow(TIM(I2C_MASTER_TIMER)); // only use counter overflow as UEV source (use overflow as timeout)
|
|
|
|
// wait one transaction for the signal to be stable (some slave have issues when an I2C transaction immediately follows)
|
|
timer_set_counter(TIM(I2C_MASTER_TIMER),0); // restart timer
|
|
timer_clear_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF); // clear flag
|
|
timer_enable_counter(TIM(I2C_MASTER_TIMER)); // enable timer for timeouts
|
|
while ( !timer_get_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF));
|
|
timer_disable_counter(TIM(I2C_MASTER_TIMER)); // disable timer for timeouts
|
|
timer_clear_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF); // clear flag
|
|
}
|
|
|
|
bool i2c_master_start(void)
|
|
{
|
|
// send (re-)start condition
|
|
i2c_send_start(I2C(I2C_MASTER_I2C)); // send start condition to start transaction
|
|
timer_set_counter(TIM(I2C_MASTER_TIMER), 0); // restart timer
|
|
timer_clear_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF); // clear flag
|
|
timer_enable_counter(TIM(I2C_MASTER_TIMER)); // enable timer for timeouts
|
|
while (!(I2C_SR1(I2C(I2C_MASTER_I2C)) & I2C_SR1_SB) && !timer_get_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF)); // wait until start condition is transmitted
|
|
timer_disable_counter(TIM(I2C_MASTER_TIMER)); // disable timer for timeouts
|
|
if (timer_get_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF)) { // timeout occurred
|
|
timer_clear_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF); // clear flag
|
|
return false;
|
|
}
|
|
if (!(I2C_SR2(I2C(I2C_MASTER_I2C)) & I2C_SR2_MSL)) { // verify if in master mode
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
bool i2c_master_select_slave(uint8_t slave, bool write)
|
|
{
|
|
if (!(I2C_SR2(I2C(I2C_MASTER_I2C)) & I2C_SR2_BUSY)) { // I2C device is not busy (start condition has not been sent)
|
|
if (!i2c_master_start()) { // send start condition
|
|
return false; // could not send start condition
|
|
}
|
|
}
|
|
if (!(I2C_SR2(I2C(I2C_MASTER_I2C)) & I2C_SR2_MSL)) { // I2C device is already not master mode
|
|
return false;
|
|
}
|
|
|
|
// select slave
|
|
i2c_send_7bit_address(I2C(I2C_MASTER_I2C), slave, write ? I2C_WRITE : I2C_READ); // select slave, with read/write flag
|
|
timer_set_counter(TIM(I2C_MASTER_TIMER), 0); // restart timer
|
|
timer_clear_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF); // clear flag
|
|
timer_enable_counter(TIM(I2C_MASTER_TIMER)); // enable timer for timeouts
|
|
while (!(I2C_SR1(I2C(I2C_MASTER_I2C)) & I2C_SR1_ADDR) && !timer_get_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF)); // wait until address is transmitted
|
|
timer_disable_counter(TIM(I2C_MASTER_TIMER)); // disable timer for timeouts
|
|
if (timer_get_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF)) { // timeout occurred (no ACK received)
|
|
timer_clear_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF); // clear flag
|
|
return false;
|
|
}
|
|
if (write) {
|
|
if (!((I2C_SR2(I2C(I2C_MASTER_I2C)) & I2C_SR2_TRA))) { // verify we are in transmit mode (and read SR2 to clear ADDR)
|
|
return false;
|
|
}
|
|
} else {
|
|
if ((I2C_SR2(I2C(I2C_MASTER_I2C)) & I2C_SR2_TRA)) { // verify we are in read mode (and read SR2 to clear ADDR)
|
|
return false;
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
bool i2c_master_read(uint8_t* data, size_t data_size)
|
|
{
|
|
// sanity check
|
|
if (data==NULL || data_size==0) { // no data to read
|
|
return true;
|
|
}
|
|
if (!(I2C_SR2(I2C(I2C_MASTER_I2C)) & I2C_SR2_BUSY)) { // I2C device is not busy (start condition has not been sent)
|
|
return false; // address has probably also not been sent
|
|
}
|
|
if (!(I2C_SR2(I2C(I2C_MASTER_I2C)) & I2C_SR2_MSL)) { // I2C device not master mode
|
|
return false;
|
|
}
|
|
|
|
// read data
|
|
for (size_t i=0; i<data_size; i++) { // read bytes
|
|
if (i==data_size-1) { // prepare to sent NACK for last byte
|
|
i2c_disable_ack(I2C(I2C_MASTER_I2C)); // NACK received to stop slave transmission
|
|
i2c_send_stop(I2C(I2C_MASTER_I2C)); // send STOP after receiving byte
|
|
} else {
|
|
i2c_enable_ack(I2C(I2C_MASTER_I2C)); // ACK received byte to continue slave transmission
|
|
}
|
|
timer_set_counter(TIM(I2C_MASTER_TIMER), 0); // restart timer
|
|
timer_clear_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF); // clear flag
|
|
timer_enable_counter(TIM(I2C_MASTER_TIMER)); // enable timer for timeouts
|
|
while (!(I2C_SR1(I2C(I2C_MASTER_I2C)) & I2C_SR1_RxNE) && !timer_get_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF)); // wait until byte has been received
|
|
timer_disable_counter(TIM(I2C_MASTER_TIMER)); // disable timer for timeouts
|
|
if (timer_get_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF)) { // timeout occurred
|
|
timer_clear_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF); // clear flag
|
|
return false;
|
|
}
|
|
data[i] = i2c_get_data(I2C(I2C_MASTER_I2C)); // read received byte
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
bool i2c_master_write(const uint8_t* data, size_t data_size)
|
|
{
|
|
// sanity check
|
|
if (data==NULL || data_size==0) { // no data to write
|
|
return true;
|
|
}
|
|
if (!(I2C_SR2(I2C(I2C_MASTER_I2C)) & I2C_SR2_BUSY)) { // I2C device is not busy (start condition has not been sent)
|
|
return false; // address has probably also not been sent
|
|
}
|
|
if (!(I2C_SR2(I2C(I2C_MASTER_I2C)) & I2C_SR2_MSL)) { // I2C device is not master mode
|
|
return false;
|
|
}
|
|
|
|
// write data
|
|
for (size_t i=0; i<data_size; i++) { // write bytes
|
|
i2c_send_data(I2C(I2C_MASTER_I2C), data[i]); // send byte to be written in memory
|
|
timer_set_counter(TIM(I2C_MASTER_TIMER),0); // restart timer
|
|
timer_clear_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF); // clear flag
|
|
timer_enable_counter(TIM(I2C_MASTER_TIMER)); // enable timer for timeouts
|
|
while (!(I2C_SR1(I2C(I2C_MASTER_I2C)) & I2C_SR1_TxE) && !timer_get_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF)); // wait until byte has been transmitted
|
|
timer_disable_counter(TIM(I2C_MASTER_TIMER)); // disable timer for timeouts
|
|
if (timer_get_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF)) { // timeout occurred (no ACK received)
|
|
timer_clear_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF); // clear flag
|
|
return false;
|
|
}
|
|
}
|
|
|
|
return true;
|
|
}
|
|
|
|
void i2c_master_stop(void)
|
|
{
|
|
// sanity check
|
|
if (!(I2C_SR2(I2C(I2C_MASTER_I2C)) & I2C_SR2_BUSY)) { // release is not busy
|
|
return; // bus has probably already been released
|
|
}
|
|
|
|
// send stop condition
|
|
i2c_send_stop(I2C(I2C_MASTER_I2C)); // send stop to release bus
|
|
timer_set_counter(TIM(I2C_MASTER_TIMER), 0); // restart timer
|
|
timer_clear_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF); // clear flag
|
|
timer_enable_counter(TIM(I2C_MASTER_TIMER)); // enable timer for timeouts
|
|
while ((I2C_SR2(I2C(I2C_MASTER_I2C)) & I2C_SR2_MSL) && !timer_get_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF)); // wait until bus released (non master mode)
|
|
timer_disable_counter(TIM(I2C_MASTER_TIMER)); // disable timer for timeouts
|
|
if (timer_get_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF)) { // timeout occurred
|
|
timer_clear_flag(TIM(I2C_MASTER_TIMER), TIM_SR_UIF); // clear flag
|
|
}
|
|
}
|
|
|
|
bool i2c_master_slave_read(uint8_t slave, uint8_t* data, size_t data_size)
|
|
{
|
|
// sanity check
|
|
if (I2C_SR2(I2C(I2C_MASTER_I2C)) & I2C_SR2_BUSY) { // I2C device is busy
|
|
return false;
|
|
}
|
|
if (I2C_SR2(I2C(I2C_MASTER_I2C)) & I2C_SR2_MSL) { // I2C device is already in master mode
|
|
return false;
|
|
}
|
|
|
|
bool success = false; // return if read succeeded
|
|
|
|
// send start condition
|
|
if (!i2c_master_start()) {
|
|
goto error;
|
|
}
|
|
// select slave to write
|
|
if (!i2c_master_select_slave(slave, true)) {
|
|
goto error;
|
|
}
|
|
// read data
|
|
if (NULL!=data && data_size>0) {
|
|
// read data
|
|
if (!i2c_master_read(data, data_size)) {
|
|
goto error;
|
|
}
|
|
}
|
|
|
|
success = true;
|
|
error:
|
|
i2c_master_stop(); // sent stop condition
|
|
return success;
|
|
}
|
|
|
|
bool i2c_master_slave_write(uint8_t slave, const uint8_t* data, size_t data_size)
|
|
{
|
|
// sanity check
|
|
if (I2C_SR2(I2C(I2C_MASTER_I2C)) & I2C_SR2_BUSY) { // I2C device is busy
|
|
return false;
|
|
}
|
|
if (I2C_SR2(I2C(I2C_MASTER_I2C)) & I2C_SR2_MSL) { // I2C device is already in master mode
|
|
return false;
|
|
}
|
|
|
|
bool success = false; // return if read succeeded
|
|
|
|
// send start condition
|
|
if (!i2c_master_start()) {
|
|
goto error;
|
|
}
|
|
// select slave to write
|
|
if (!i2c_master_select_slave(slave, true)) {
|
|
goto error;
|
|
}
|
|
// write data
|
|
if (NULL!=data && data_size>0) {
|
|
if (!i2c_master_write(data, data_size)) {
|
|
goto error;
|
|
}
|
|
}
|
|
|
|
success = true;
|
|
error:
|
|
i2c_master_stop(); // sent stop condition
|
|
return success;
|
|
}
|
|
|
|
bool i2c_master_address_read(uint8_t slave, const uint8_t* address, size_t address_size, uint8_t* data, size_t data_size)
|
|
{
|
|
// sanity check
|
|
if (I2C_SR2(I2C(I2C_MASTER_I2C)) & I2C_SR2_BUSY) { // I2C device is busy
|
|
return false;
|
|
}
|
|
if (I2C_SR2(I2C(I2C_MASTER_I2C)) & I2C_SR2_MSL) { // I2C device is already in master mode
|
|
return false;
|
|
}
|
|
|
|
bool success = false; // return if read succeeded
|
|
|
|
// write address
|
|
if (NULL!=address && address_size>0) {
|
|
// send start condition
|
|
if (!i2c_master_start()) {
|
|
goto error;
|
|
}
|
|
// select slave to write
|
|
if (!i2c_master_select_slave(slave, true)) {
|
|
goto error;
|
|
}
|
|
// send address
|
|
if (!i2c_master_write(address, address_size)) {
|
|
goto error;
|
|
}
|
|
}
|
|
// read data
|
|
if (NULL!=data && data_size>0) {
|
|
// send re-start condition
|
|
if (!i2c_master_start()) {
|
|
goto error;
|
|
}
|
|
// select slave to read
|
|
if (!i2c_master_select_slave(slave, false)) {
|
|
goto error;
|
|
}
|
|
// read data
|
|
if (!i2c_master_read(data, data_size)) {
|
|
goto error;
|
|
}
|
|
}
|
|
|
|
success = true;
|
|
error:
|
|
i2c_master_stop(); // sent stop condition
|
|
return success;
|
|
}
|
|
|
|
bool i2c_master_address_write(uint8_t slave, const uint8_t* address, size_t address_size, const uint8_t* data, size_t data_size)
|
|
{
|
|
// sanity check
|
|
if (I2C_SR2(I2C(I2C_MASTER_I2C)) & I2C_SR2_BUSY) { // I2C device is busy
|
|
return false;
|
|
}
|
|
if (I2C_SR2(I2C(I2C_MASTER_I2C)) & I2C_SR2_MSL) { // I2C device is already in master mode
|
|
return false;
|
|
}
|
|
|
|
bool success = false; // return if read succeeded
|
|
|
|
// send start condition
|
|
if (!i2c_master_start()) {
|
|
goto error;
|
|
}
|
|
// select slave to write
|
|
if (!i2c_master_select_slave(slave, true)) {
|
|
goto error;
|
|
}
|
|
// write address
|
|
if (NULL!=address && address_size>0) {
|
|
// send address
|
|
if (!i2c_master_write(address, address_size)) {
|
|
goto error;
|
|
}
|
|
}
|
|
// write data
|
|
if (NULL!=data && data_size>0) {
|
|
if (!i2c_master_write(data, data_size)) {
|
|
goto error;
|
|
}
|
|
}
|
|
|
|
success = true;
|
|
error:
|
|
i2c_master_stop(); // sent stop condition
|
|
return success;
|
|
}
|