kingkevin/stm32f1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

README: port to F4

Browse Source
This commit is contained in:
King Kévin 2020-11-30 15:03:32 +01:00
parent d7b6300a50
commit a9461b53f5
1 changed files with 15 additions and 29 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

44
README.md
View File

@ -1,4 +1,4 @@
This firmware template is designed for development boards based around [STM32 F1 series micro-controller](http://www.st.com/web/en/catalog/mmc/FM141/SC1169/SS1031).
This firmware template is designed for development boards based around [STM32 F4 series micro-controller](https://www.st.com/en/microcontrollers-microprocessors/stm32f4-series.html).
project
=======
@ -16,36 +16,17 @@ technology
board
=====
The current implementation uses a [core board](https://wiki.cuvoodoo.info/doku.php?id=stm32f1xx#core_board).
The underlying template also supports following board:
- [Maple Mini](http://leaflabs.com/docs/hardware/maple-mini.html), based on a STM32F103CBT6
- [System Board](https://wiki.cuvoodoo.info/doku.php?id=stm32f1xx#system_board), based on a STM32F103C8T6
- [blue pill](https://wiki.cuvoodoo.info/doku.php?id=stm32f1xx#blue_pill), based on a STM32F103C8T6
- [black pill](https://wiki.cuvoodoo.info/doku.php?id=stm32f1xx#black_pill), based on a STM32F103C8T6
- [core board](https://wiki.cuvoodoo.info/doku.php?id=stm32f1xx#core_board), based on a STM32F103C8T6
- [ST-LINK V2 mini](https://wiki.cuvoodoo.info/doku.php?id=jtag#mini_st-link_v2), a ST-LINK/V2 clone based on a STM32F101C8T6
- [USB-Blaster](https://wiki.cuvoodoo.info/doku.php?id=jtag#armjishu_usb-blaster), an Altera USB-Blaster clone based on a STM32F101C8T6
- [WeAct MiniF4](https://github.com/WeActTC/MiniF4-STM32F4x1), based on a STM32F401CCU6
**Which board is used is defined in the Makefile**.
This is required to map the user LED and button provided on the board
The ST-LINK V2 mini clone has SWD test points on the board.
Because read protection is enabled, you will first need to remove the protection to be able to flash the firmware.
To remove the read protection (and erase flash), run `rake remove_protection` while a SWD adapter is connected.
The Altera USB-Blaster clone has a pin header for SWD and UART1 on the board.
SWD is disabled in the main firmware, and it has read protection.
To be able to flash using SWD (or the serial port), the BOOT0 pin must be set to 1 to boot the system memory install of the flash memory.
To set BOOT0 to 1, apply 3.3 V on R11, between the resistor and the reference designator, when powering the device.
The red LED should stay off while the green LED is on.
Now you can remove the read protection (and erase flash), run `rake remove_protection` while a SWD adapter is connected.
connections
===========
Connect the peripherals the following way (STM32F10X signal; STM32F10X pin; peripheral pin; peripheral signal; comment):
Connect the peripherals the following way (STM32F4xx signal; STM32F4xx pin; peripheral pin; peripheral signal; comment):
- *list board to peripheral pin connections*
@ -81,15 +62,20 @@ The `bootloader` is started first and immediately jumps to the `application` if
The `application` image is the main application and is implemented in `application.c`.
It is up to the application to advertise USB DFU support (i.e. as does the provided USB CDC ACM example).
The `bootloader` image will be flashed using SWD (Serial Wire Debug).
The simplest way do flash the `bootloader` image is using the embedded bootloader.
By pressing the BOOT0 button (setting the pin low) while powering or resetting the device, the micro-controller boot its embedded UART/USB DFU bootloader.
Connect a USB cable and run `rake dfu_bootloader`.
Once the `bootloader` is flashed, it is possible to flash the `application` over USB using the DFU protocol by running `rake flash` (equivalent to `rake dfu_application`.
To force the bootloader to start the DFU mode press the user button or short a pin, depending on the board.
Note: I use my own DFU bootloader instead of the embedded bootloader because I was not able to start the embedded USB DFU bootloader from the application.
The images can also be flash using SWD (Serial Wire Debug) in case the firmware gets stuck and does not provide USB functionalities.
For that you need an SWD adapter.
The `Makefile` uses a ST-Link V2 programmer along OpenOCD software (default), or Black Magic Probe.
To flash the `booltoader` using SWD run `rake flash_booloader`.
If the development board uses the CKS32 chip STM32 alternative, use `CPUTAPID=0x2ba01477 rake flash_booloader`.
Once the `bootloader` is flashed it is possible to flash the `application` over USB using the DFU protocol by running `rake flash`.
To force the bootloader to start the DFU mode press the user button or short a pin, depending on the board.
It is also possible to flash the `application` image using SWD by running `rake flash_application`.
To flash the `booltoader` using SWD run `rake swd_booloader` (this will also erase the application).
To flash the `application` using SWD run `rake swd_aplication` (or `rake swd`).
To erase all memory and unlock read/write protection, run `rake remove_protection`.
debug
-----