kingkevin
/
stm32f1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

sensor_dht11: minor, put spaces around operators

This commit is contained in:
King Kévin 2020-02-17 14:32:49 +01:00
parent e88177d785
commit 6b042506b9
2 changed files with 21 additions and 21 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
lib/sensor_dht11.c
View File

@ -12,10 +12,10 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/** library to query measurements from Aosong DHT11 temperature and relative humidity sensor (code)
* @file sensor_dht11.c
/** library to query measurements from Aosong DHT11 temperature and relative humidity sensor
* @file
* @author King Kévin <kingkevin@cuvoodoo.info>
* @date 2017
* @date 2017-2020
* @note peripherals used: timer channel @ref sensor_dht11_timer
*/
@ -79,7 +79,7 @@ void sensor_dht11_setup(void)
rcc_periph_clock_enable(RCC_TIM(SENSOR_DHT11_TIMER)); // enable clock for timer peripheral
rcc_periph_reset_pulse(RST_TIM(SENSOR_DHT11_TIMER)); // reset timer state
timer_set_mode(TIM(SENSOR_DHT11_TIMER), TIM_CR1_CKD_CK_INT, TIM_CR1_CMS_EDGE, TIM_CR1_DIR_UP); // set timer mode, use undivided timer clock,edge alignment (simple count), and count up
timer_set_prescaler(TIM(SENSOR_DHT11_TIMER), 20-1); // set the prescaler so this 16 bits timer allows to wait for 18 ms for the start signal ( 1/(72E6/20/(2**16))=18.20ms )
timer_set_prescaler(TIM(SENSOR_DHT11_TIMER), 20 - 1); // set the prescaler so this 16 bits timer allows to wait for 18 ms for the start signal ( 1/(72E6/20/(2**16))=18.20ms )
timer_ic_set_input(TIM(SENSOR_DHT11_TIMER), TIM_IC(SENSOR_DHT11_CHANNEL), TIM_IC_IN_TI(SENSOR_DHT11_CHANNEL)); // configure ICx to use TIn
timer_ic_set_filter(TIM(SENSOR_DHT11_TIMER), TIM_IC(SENSOR_DHT11_CHANNEL), TIM_IC_OFF); // use no filter input (precise timing needed)
timer_ic_set_polarity(TIM(SENSOR_DHT11_TIMER), TIM_IC(SENSOR_DHT11_CHANNEL), TIM_IC_FALLING); // capture on rising edge
@ -99,13 +99,13 @@ void sensor_dht11_setup(void)
bool sensor_dht11_measurement_request(void)
{
if (sensor_dht11_state!=SENSOR_DHT11_OFF) { // not the right state to start (wait up until timeout to reset state)
if (sensor_dht11_state != SENSOR_DHT11_OFF) { // not the right state to start (wait up until timeout to reset state)
return false;
}
if (gpio_get(TIM_CH_PORT(SENSOR_DHT11_TIMER,SENSOR_DHT11_CHANNEL), TIM_CH_PIN(SENSOR_DHT11_TIMER,SENSOR_DHT11_CHANNEL))==0) { // signal should be high per default
if (gpio_get(TIM_CH_PORT(SENSOR_DHT11_TIMER,SENSOR_DHT11_CHANNEL), TIM_CH_PIN(SENSOR_DHT11_TIMER,SENSOR_DHT11_CHANNEL)) == 0) { // signal should be high per default
return false;
}
if (TIM_CR1(TIM(SENSOR_DHT11_TIMER))&(TIM_CR1_CEN)) { // timer should be off
if (TIM_CR1(TIM(SENSOR_DHT11_TIMER)) & (TIM_CR1_CEN)) { // timer should be off
return false;
}
sensor_dht11_reset(); // reset states
@ -122,10 +122,10 @@ bool sensor_dht11_measurement_request(void)
struct sensor_dht11_measurement_t sensor_dht11_measurement_decode(void)
{
struct sensor_dht11_measurement_t measurement = { 0xff, 0xff }; // measurement to return
if (sensor_dht11_bit<40) { // not enough bits received
if (sensor_dht11_bit < 40) { // not enough bits received
return measurement;
}
if ((uint8_t)(sensor_dht11_bits[0]+sensor_dht11_bits[1]+sensor_dht11_bits[2]+sensor_dht11_bits[3])!=sensor_dht11_bits[4]) { // error in checksum (not really parity bit, as mentioned in the datasheet)
if ((uint8_t)(sensor_dht11_bits[0] + sensor_dht11_bits[1] + sensor_dht11_bits[2] + sensor_dht11_bits[3]) != sensor_dht11_bits[4]) { // error in checksum (not really parity bit, as mentioned in the datasheet)
return measurement;
}
// calculate measured values (byte 1 and 3 should be the factional value but they are always 0)
@ -140,7 +140,7 @@ void TIM_ISR(SENSOR_DHT11_TIMER)(void)
{
if (timer_get_flag(TIM(SENSOR_DHT11_TIMER), TIM_SR_UIF)) { // overflow update event happened
timer_clear_flag(TIM(SENSOR_DHT11_TIMER), TIM_SR_UIF); // clear flag
if (sensor_dht11_state==SENSOR_DHT11_HOST_START) { // start signal sent
if (sensor_dht11_state == SENSOR_DHT11_HOST_START) { // start signal sent
gpio_set_mode(TIM_CH_PORT(SENSOR_DHT11_TIMER,SENSOR_DHT11_CHANNEL), GPIO_MODE_INPUT, GPIO_CNF_INPUT_FLOAT, TIM_CH_PIN(SENSOR_DHT11_TIMER,SENSOR_DHT11_CHANNEL)); // switch pin to input (the external pull up with also set the signal high)
sensor_dht11_state = SENSOR_DHT11_HOST_STARTED; // switch to next state
timer_ic_enable(TIM(SENSOR_DHT11_TIMER), TIM_IC(SENSOR_DHT11_CHANNEL)); // enable capture interrupt only when receiving data
@ -150,31 +150,31 @@ void TIM_ISR(SENSOR_DHT11_TIMER)(void)
} else if (timer_get_flag(TIM(SENSOR_DHT11_TIMER), TIM_SR_CCIF(SENSOR_DHT11_CHANNEL))) { // edge detected on input capture
uint16_t time = TIM_CCR(SENSOR_DHT11_TIMER,SENSOR_DHT11_CHANNEL); // save captured bit timing (this clear also the flag)
timer_set_counter(TIM(SENSOR_DHT11_TIMER), 0); // reset timer counter
time = (time*1E6)/(rcc_ahb_frequency/(TIM_PSC(TIM(SENSOR_DHT11_TIMER))+1)); // calculate time in us
time = (time * 1E6) / (rcc_ahb_frequency / (TIM_PSC(TIM(SENSOR_DHT11_TIMER)) + 1)); // calculate time in us
switch (sensor_dht11_state) {
case (SENSOR_DHT11_HOST_STARTED): // the host query data and the slave is responding
sensor_dht11_state = SENSOR_DHT11_SLAVE_START; // set new state
break;
case (SENSOR_DHT11_SLAVE_START): // the slave sent the start signal
if (time >= ((80+80)*(1-SENSOR_DHT11_JITTER)) && time <= ((80+80)*(1+SENSOR_DHT11_JITTER))) { // response time should be 80 us low and 80 us high
if (time >= ((80 + 80) * (1 - SENSOR_DHT11_JITTER)) && time <= ((80 + 80)*(1 + SENSOR_DHT11_JITTER))) { // response time should be 80 us low and 80 us high
sensor_dht11_state = SENSOR_DHT11_SLAVE_BIT; // set new state
} else {
goto error;
}
break;
case (SENSOR_DHT11_SLAVE_BIT): // the slave sent a bit
if (sensor_dht11_bit>=40) { // no bits should be received after 40 bits
if (sensor_dht11_bit >= 40) { // no bits should be received after 40 bits
goto error;
}
if (time >= ((50+26)*(1-SENSOR_DHT11_JITTER)) && time <= ((50+28)*(1+SENSOR_DHT11_JITTER))) { // bit 0 time should be 50 us low and 26-28 us high
sensor_dht11_bits[sensor_dht11_bit/8] &= ~(1<<(7-(sensor_dht11_bit%8))); // clear bit
} else if (time >= ((50+70)*(1-SENSOR_DHT11_JITTER)) && time <= ((50+70)*(1+SENSOR_DHT11_JITTER))) { // bit 1 time should be 50 us low and 70 us high
sensor_dht11_bits[sensor_dht11_bit/8] |= (1<<(7-(sensor_dht11_bit%8))); // set bit
if (time >= ((50 + 26) * (1 - SENSOR_DHT11_JITTER)) && time <= ((50 + 28) * (1 + SENSOR_DHT11_JITTER))) { // bit 0 time should be 50 us low and 26-28 us high
sensor_dht11_bits[sensor_dht11_bit / 8] &= ~(1 << (7 - (sensor_dht11_bit % 8))); // clear bit
} else if (time >= ((50 + 70)*(1 - SENSOR_DHT11_JITTER)) && time <= ((50 + 70) * (1 + SENSOR_DHT11_JITTER))) { // bit 1 time should be 50 us low and 70 us high
sensor_dht11_bits[sensor_dht11_bit / 8] |= (1 << (7 - (sensor_dht11_bit % 8))); // set bit
} else {
goto error;
}
sensor_dht11_bit++;
if (sensor_dht11_bit>=40) { // all bits received
if (sensor_dht11_bit >= 40) { // all bits received
sensor_dht11_reset(); // reset states
sensor_dht11_bit = 40; // signal decoder all bits have been received
sensor_dht11_measurement_received = true; // signal user all bits have been received

6
lib/sensor_dht11.h
View File

@ -12,10 +12,10 @@
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/** library to query measurements from Aosong DHT11 temperature and relative humidity sensor (API)
* @file sensor_dht11.h
/** library to query measurements from Aosong DHT11 temperature and relative humidity sensor
* @file
* @author King Kévin <kingkevin@cuvoodoo.info>
* @date 2017
* @date 2017-2020
* @note peripherals used: timer channel @ref sensor_dht11_timer (add external pull-up resistor)
*/
#pragma once