applciation: fix set target voltage
This commit is contained in:
parent
734be00a82
commit
3959eabb84
|
@ -296,7 +296,7 @@ static void command_target_reset(void* argument)
|
||||||
}
|
}
|
||||||
|
|
||||||
const bool open_drain = (GPIO_OTYPER(GPIO_PORT(TARGET_RST_PIN)) & GPIO_PIN(TARGET_RST_PIN)); // if the output is configured as open drain (else it's push-pull)
|
const bool open_drain = (GPIO_OTYPER(GPIO_PORT(TARGET_RST_PIN)) & GPIO_PIN(TARGET_RST_PIN)); // if the output is configured as open drain (else it's push-pull)
|
||||||
printf("reset pin set to %s active %s\n", open_drain ? "open-drain" : "push-pull", active_low ? "low" : "high");
|
printf("reset pin set to %s active %s\n", open_drain ? "open-drain" : "push-pull (3.3V)", active_low ? "low" : "high");
|
||||||
if (gpio_get(GPIO_PORT(TARGET_RST_PIN), GPIO_PIN(TARGET_RST_PIN))) {
|
if (gpio_get(GPIO_PORT(TARGET_RST_PIN), GPIO_PIN(TARGET_RST_PIN))) {
|
||||||
if (active_low) {
|
if (active_low) {
|
||||||
puts("reset released\n");
|
puts("reset released\n");
|
||||||
|
@ -400,7 +400,7 @@ static void command_monitor(void* argument)
|
||||||
for (uint8_t i = channel_start; i <= channel_stop; i++) {
|
for (uint8_t i = channel_start; i <= channel_stop; i++) {
|
||||||
gpio_mode_setup(channel_ports[i], GPIO_MODE_INPUT, GPIO_PUPD_PULLDOWN, channel_pins[i]); // set to pull down
|
gpio_mode_setup(channel_ports[i], GPIO_MODE_INPUT, GPIO_PUPD_PULLDOWN, channel_pins[i]); // set to pull down
|
||||||
}
|
}
|
||||||
} else if (1 == pull) {
|
} else if (3 == pull) {
|
||||||
puts("channels are pulled high to 3.3V using internal 40 kOhm resistor\n");
|
puts("channels are pulled high to 3.3V using internal 40 kOhm resistor\n");
|
||||||
for (uint8_t i = channel_start; i <= channel_stop; i++) {
|
for (uint8_t i = channel_start; i <= channel_stop; i++) {
|
||||||
gpio_mode_setup(channel_ports[i], GPIO_MODE_INPUT, GPIO_PUPD_PULLUP, channel_pins[i]); // set to pull up
|
gpio_mode_setup(channel_ports[i], GPIO_MODE_INPUT, GPIO_PUPD_PULLUP, channel_pins[i]); // set to pull up
|
||||||
|
|
Loading…
Reference in New Issue