spark_abacus/Makefile

201 lines
6.4 KiB
Makefile

## This library is free software: you can redistribute it and/or modify
## it under the terms of the GNU Lesser General Public License as published by
## the Free Software Foundation, either version 3 of the License, or
## (at your option) any later version.
##
## This library is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
## GNU Lesser General Public License for more details.
##
## You should have received a copy of the GNU Lesser General Public License
## along with this library. If not, see <http://www.gnu.org/licenses/>.
##
## the make file provide rule to compile and flash firmware for STM32F1 micro-controllers
## it uses libopencm3
# be silent per default, but 'make V=1' will show all compiler calls.
ifneq ($(V),1)
Q := @
NULL := 1> /dev/null 2> /dev/null
endif
# the final binary name (without extension)
BINARY = firmware
# which development board is used
# supported are: SYSTEM_BOARD, MAPLE_MINI, BLUE_PILL
BOARD = BLUE_PILL
# source files
CSRC = $(wildcard *.c)
CHDR = $(wildcard *.h)
OBJ = $(patsubst %.c,%.o,$(CSRC))
# figure out based on the includes which library files are used in the main CSRC files
DEPENDENCIES = $(patsubst %.c,%.inc,$(CSRC))
# my library collection
LIB = lib
# the library files to use
# this will be populated using includes based DEPENDENCIES
LIB_CSRC =
LIB_CHDR = $(patsubst %.c,%.h,$(LIB_CSRC))
LIB_OBJ = $(patsubst %.c,%.o,$(LIB_CSRC))
# populates LIB_CSRC based on the library files used
-include $(DEPENDENCIES)
# executables
PREFIX ?= arm-none-eabi
CC := $(PREFIX)-gcc
CXX := $(PREFIX)-g++
LD := $(PREFIX)-gcc
AR := $(PREFIX)-ar
AS := $(PREFIX)-as
OBJCOPY := $(PREFIX)-objcopy
OBJDUMP := $(PREFIX)-objdump
GDB := $(PREFIX)-gdb
# opencm3 libraries
OPENCM3_DIR := libopencm3
INCLUDE_DIR = $(OPENCM3_DIR)/include
LIB_DIR = $(OPENCM3_DIR)/lib
SCRIPT_DIR = $(OPENCM3_DIR)/scripts
# verify if libopencm3 has been downloaded
OPENCM3_DIR_EXISTS = $(shell [ -d $(OPENCM3_DIR) ] && echo 1 || echo 0 )
ifeq ($(OPENCM3_DIR_EXISTS), 0)
$(info run "git submodule init" and "git submodule update" before runnig make)
$(error libopencm3 repository is not initialized)
endif
# device flags
DEFS += -DSTM32F1 -D$(BOARD)
# C flags
CFLAGS += -Os -g
CFLAGS += -std=c99 -Wpedantic -Wall -Werror -Wundef -Wextra -Wshadow -Wredundant-decls -Wmissing-prototypes -Wstrict-prototypes -Wstrict-overflow=5
CFLAGS += -fno-common -ffunction-sections -fdata-sections
CFLAGS += -I. -I$(INCLUDE_DIR) $(patsubst %,-I%,$(LIB))
CFLAGS += $(DEFS)
# linker script
ifeq ($(BOARD),SYSTEM_BOARD)
LDSCRIPT = stm32f103x8-dfu.ld
else ifeq ($(BOARD),BLUE_PILL)
LDSCRIPT = stm32f103x8-dfu.ld
else ifeq ($(BOARD),MAPLE_MINI)
LDSCRIPT = stm32f103xb-dfu.ld
endif
# linker flags
LDFLAGS += --static -nostartfiles
LDFLAGS += -L$(LIB_DIR)
LDFLAGS += -I. $(patsubst %,-I%,$(LIB))
LDFLAGS += -T$(LDSCRIPT)
LDFLAGS += -Wl,-Map=$(*).map
LDFLAGS += -Wl,--gc-sections
ifeq ($(V),99)
LDFLAGS += -Wl,--print-gc-sections
endif
# used libraries
LIBNAME = opencm3_stm32f1
LDLIBS += -lm -l$(LIBNAME)
LDLIBS += -Wl,--start-group -lc -lgcc -lnosys -Wl,--end-group
# device specific flags
FP_FLAGS ?= -msoft-float
ARCH_FLAGS = -mthumb -mcpu=cortex-m3 $(FP_FLAGS) -mfix-cortex-m3-ldrd
# SWD adapter used
# supported are : st-link v2 (STLINKV2), black magic probe (BMP)
SWD_ADAPTER ?= STLINKV2
ifeq ($(SWD_ADAPTER),STLINKV2)
# OpenOCD configuration
OOCD ?= openocd
OOCD_INTERFACE ?= stlink-v2
OOCD_TARGET ?= stm32f1x
else ifeq ($(SWD_ADAPTER),BMP)
# the black magic probe has a SWD controller built in
BMPPORT ?= /dev/ttyACM0
endif
# which USB CDC ACM port is used bu the device, so we can reset it
ifeq ($(SWD_ADAPTER),STLINKV2)
ACMPORT = /dev/ttyACM0
else ifeq ($(SWD_ADAPTER),BMP)
ACMPORT = /dev/ttyACM2
endif
ACMPORT_EXISTS = $(shell [ -e $(ACMPORT) ] && echo 1 || echo 0 )
# compile target rules
all: elf
elf: $(BINARY).elf
bin: $(BINARY).bin
hex: $(BINARY).hex
srec: $(BINARY).srec
list: $(BINARY).list
%.bin %.hex %.srec: %.elf
$(Q)$(OBJCOPY) -Osrec $(<) $(@)
%.map %.list: %.elf
$(Q)$(OBJDUMP) -S $(<) > $(@)
%.elf: $(LDSCRIPT) $(LIB_DIR)/lib$(LIBNAME).a $(OBJ) $(LIB_OBJ)
$(info compiling $(@))
$(Q)$(LD) $(LDFLAGS) $(ARCH_FLAGS) $(OBJ) $(LIB_OBJ) $(LDLIBS) -o $(@)
$(Q)size $(@)
%.o: %.c $(CHDR) $(LIB_CHDR)
$(Q)$(CC) $(CFLAGS) $(ARCH_FLAGS) -o $(@) -c $(<)
# generate dependencies
%.d: %.c
@# check which libraries are used
$(Q)$(CC) $(CFLAGS) $(ARCH_FLAGS) -MM -MF $(@) -o /dev/null -c $(<)
# figure out which library source files are used for later inclusion
%.inc: %.d
$(Q)grep -o -e " ${LIB}\/[^ ]*\.h" $(<) | sed -e 's/\.h$$/.c/g' -e 's/^/LIB_CSRC +=/' > $(@)
# doxygen documentation
doc: Doxyfile README.md $(CSRC) $(CHDR) $(LIB_CSRC) $(LIB_CHDR)
$(Q)doxygen $(<)
clean:
$(Q)$(RM) $(BINARY).elf $(BINARY).bin $(BINARY).hex $(BINARY).map $(OBJ) $(LIB_OBJ) $(LIB)/*.o $(DEPENDENCIES)
# make libopencm3 if not done
$(LIB_DIR)/lib$(LIBNAME).a:
$(info compiling libopencm3 library)
$(Q)$(MAKE) -C $(OPENCM3_DIR)
flash: $(BINARY).hex
$(info flashing $(<) using SWD)
ifeq ($(SWD_ADAPTER),STLINKV2)
$(Q)$(OOCD) --file interface/$(OOCD_INTERFACE).cfg --file target/$(OOCD_TARGET).cfg --command "init" --command "reset init" --command "flash write_image erase $(<)" --command "reset" --command "shutdown" $(NULL)
else ifeq ($(SWD_ADAPTER),BMP)
$(Q)$(GDB) --eval-command="target extended-remote $(BMPPORT)" --eval-command="monitor version" --eval-command="monitor swdp_scan" --eval-command="attach 1" --eval-command="load" --eval-command="detach" --eval-command="kill" --eval-command="quit" $(<)
endif
# reset device by setting the data width to 5 bis on the USB CDC ACM port
reset:
ifeq ($(ACMPORT_EXISTS), 1)
$(Q)stty --file $(ACMPORT) 115200 raw cs5
$(Q)sleep 0.5
endif
# debug using GDB
debug: $(BINARY).elf
ifeq ($(SWD_ADAPTER),STLINKV2)
# for GDB to work with openOCD the firmware needs to be reloaded
$(Q)$(GDB) --eval-command="target remote | $(OOCD) --file interface/$(OOCD_INTERFACE).cfg --file target/$(OOCD_TARGET).cfg --command \"gdb_port pipe; log_output /dev/null; init\"" --eval-command="monitor reset halt" --eval-command="load" --eval-command="monitor reset init" $(<)
else ifeq ($(SWD_ADAPTER),BMP)
$(Q)$(GDB) --eval-command="target extended-remote $(BMPPORT)" --eval-command="monitor version" --eval-command="monitor swdp_scan" --eval-command="attach 1" $(<)
endif
.PHONY: clean elf bin hex srec list libraries flash reset