418 lines
12 KiB
C
418 lines
12 KiB
C
/*
|
|
* The MIT License (MIT)
|
|
*
|
|
* Copyright (c) 2019 Ha Thach (tinyusb.org)
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
* in the Software without restriction, including without limitation the rights
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
* furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice shall be included in
|
|
* all copies or substantial portions of the Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
* THE SOFTWARE.
|
|
*
|
|
* This file is part of the TinyUSB stack.
|
|
*/
|
|
|
|
#include "sam.h"
|
|
#include "bsp/board_api.h"
|
|
#include "board.h"
|
|
|
|
// Suppress warning caused by mcu driver
|
|
#ifdef __GNUC__
|
|
#pragma GCC diagnostic push
|
|
#pragma GCC diagnostic ignored "-Wcast-qual"
|
|
#endif
|
|
|
|
#include "hal/include/hal_gpio.h"
|
|
#include "hal/include/hal_init.h"
|
|
#include "hri/hri_nvmctrl_d21.h"
|
|
|
|
#include "hpl/gclk/hpl_gclk_base.h"
|
|
#include "hpl_pm_config.h"
|
|
#include "hpl/pm/hpl_pm_base.h"
|
|
|
|
#ifdef __GNUC__
|
|
#pragma GCC diagnostic pop
|
|
#endif
|
|
|
|
//--------------------------------------------------------------------+
|
|
// MACRO TYPEDEF CONSTANT ENUM DECLARATION
|
|
//--------------------------------------------------------------------+
|
|
|
|
/* Referenced GCLKs, should be initialized firstly */
|
|
#define _GCLK_INIT_1ST (1 << 0 | 1 << 1)
|
|
|
|
/* Not referenced GCLKs, initialized last */
|
|
#define _GCLK_INIT_LAST (~_GCLK_INIT_1ST)
|
|
|
|
//--------------------------------------------------------------------+
|
|
// Forward USB interrupt events to TinyUSB IRQ Handler
|
|
//--------------------------------------------------------------------+
|
|
void USB_Handler(void) {
|
|
tud_int_handler(0);
|
|
}
|
|
|
|
//--------------------------------------------------------------------+
|
|
// Implementation
|
|
//--------------------------------------------------------------------+
|
|
static void uart_init(void);
|
|
|
|
#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421
|
|
#define MAX3421_SERCOM TU_XSTRCAT(SERCOM, MAX3421_SERCOM_ID)
|
|
|
|
static void max3421_init(void);
|
|
#endif
|
|
|
|
void board_init(void) {
|
|
// Clock init ( follow hpl_init.c )
|
|
hri_nvmctrl_set_CTRLB_RWS_bf(NVMCTRL, 2);
|
|
|
|
_pm_init();
|
|
_sysctrl_init_sources();
|
|
#if _GCLK_INIT_1ST
|
|
_gclk_init_generators_by_fref(_GCLK_INIT_1ST);
|
|
#endif
|
|
_sysctrl_init_referenced_generators();
|
|
_gclk_init_generators_by_fref(_GCLK_INIT_LAST);
|
|
|
|
// Update SystemCoreClock since it is hard coded with asf4 and not correct
|
|
// Init 1ms tick timer (samd SystemCoreClock may not correct)
|
|
SystemCoreClock = CONF_CPU_FREQUENCY;
|
|
#if CFG_TUSB_OS == OPT_OS_NONE
|
|
SysTick_Config(CONF_CPU_FREQUENCY / 1000);
|
|
#endif
|
|
|
|
// Led init
|
|
#ifdef LED_PIN
|
|
gpio_set_pin_direction(LED_PIN, GPIO_DIRECTION_OUT);
|
|
board_led_write(false);
|
|
#endif
|
|
|
|
// Button init
|
|
#ifdef BUTTON_PIN
|
|
gpio_set_pin_direction(BUTTON_PIN, GPIO_DIRECTION_IN);
|
|
gpio_set_pin_pull_mode(BUTTON_PIN, BUTTON_STATE_ACTIVE ? GPIO_PULL_DOWN : GPIO_PULL_UP);
|
|
#endif
|
|
|
|
uart_init();
|
|
|
|
#if CFG_TUSB_OS == OPT_OS_FREERTOS
|
|
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
|
|
NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
|
|
#endif
|
|
|
|
/* USB Clock init
|
|
* The USB module requires a GCLK_USB of 48 MHz ~ 0.25% clock
|
|
* for low speed and full speed operation. */
|
|
_pm_enable_bus_clock(PM_BUS_APBB, USB);
|
|
_pm_enable_bus_clock(PM_BUS_AHB, USB);
|
|
_gclk_enable_channel(USB_GCLK_ID, GCLK_CLKCTRL_GEN_GCLK0_Val);
|
|
|
|
// USB Pin Init
|
|
gpio_set_pin_direction(PIN_PA24, GPIO_DIRECTION_OUT);
|
|
gpio_set_pin_level(PIN_PA24, false);
|
|
gpio_set_pin_pull_mode(PIN_PA24, GPIO_PULL_OFF);
|
|
gpio_set_pin_direction(PIN_PA25, GPIO_DIRECTION_OUT);
|
|
gpio_set_pin_level(PIN_PA25, false);
|
|
gpio_set_pin_pull_mode(PIN_PA25, GPIO_PULL_OFF);
|
|
|
|
gpio_set_pin_function(PIN_PA24, PINMUX_PA24G_USB_DM);
|
|
gpio_set_pin_function(PIN_PA25, PINMUX_PA25G_USB_DP);
|
|
|
|
// Output 500hz PWM on D12 (PA19 - TCC0 WO[3]) so we can validate the GCLK0 clock speed with a Saleae.
|
|
_pm_enable_bus_clock(PM_BUS_APBC, TCC0);
|
|
TCC0->PER.bit.PER = 48000000 / 1000;
|
|
TCC0->CC[3].bit.CC = 48000000 / 2000;
|
|
TCC0->CTRLA.bit.ENABLE = true;
|
|
|
|
gpio_set_pin_function(PIN_PA19, PINMUX_PA19F_TCC0_WO3);
|
|
_gclk_enable_channel(TCC0_GCLK_ID, GCLK_CLKCTRL_GEN_GCLK0_Val);
|
|
|
|
#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421
|
|
max3421_init();
|
|
#endif
|
|
}
|
|
|
|
//--------------------------------------------------------------------+
|
|
// Board porting API
|
|
//--------------------------------------------------------------------+
|
|
|
|
void board_led_write(bool state) {
|
|
(void) state;
|
|
#ifdef LED_PIN
|
|
gpio_set_pin_level(LED_PIN, state ? LED_STATE_ON : (1 - LED_STATE_ON));
|
|
#endif
|
|
}
|
|
|
|
uint32_t board_button_read(void) {
|
|
#ifdef BUTTON_PIN
|
|
return BUTTON_STATE_ACTIVE == gpio_get_pin_level(BUTTON_PIN);
|
|
#else
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
#if defined(UART_SERCOM)
|
|
|
|
#define BOARD_SERCOM2(n) SERCOM ## n
|
|
#define BOARD_SERCOM(n) BOARD_SERCOM2(n)
|
|
|
|
static void uart_init(void)
|
|
{
|
|
#if UART_SERCOM == 0
|
|
gpio_set_pin_function(PIN_PA06, PINMUX_PA06D_SERCOM0_PAD2);
|
|
gpio_set_pin_function(PIN_PA07, PINMUX_PA07D_SERCOM0_PAD3);
|
|
|
|
// setup clock (48MHz)
|
|
_pm_enable_bus_clock(PM_BUS_APBC, SERCOM0);
|
|
_gclk_enable_channel(SERCOM0_GCLK_ID_CORE, GCLK_CLKCTRL_GEN_GCLK0_Val);
|
|
|
|
SERCOM0->USART.CTRLA.bit.SWRST = 1; /* reset SERCOM & enable config */
|
|
while(SERCOM0->USART.SYNCBUSY.bit.SWRST);
|
|
|
|
SERCOM0->USART.CTRLA.reg = /* CMODE = 0 -> async, SAMPA = 0, FORM = 0 -> USART frame, SMPR = 0 -> arithmetic baud rate */
|
|
SERCOM_USART_CTRLA_SAMPR(1) | /* 0 = 16x / arithmetic baud rate, 1 = 16x / fractional baud rate */
|
|
// SERCOM_USART_CTRLA_FORM(0) | /* 0 = USART Frame, 2 = LIN Master */
|
|
SERCOM_USART_CTRLA_DORD | /* LSB first */
|
|
SERCOM_USART_CTRLA_MODE(1) | /* 0 = Asynchronous, 1 = USART with internal clock */
|
|
SERCOM_USART_CTRLA_RXPO(3) | /* pad 3 */
|
|
SERCOM_USART_CTRLA_TXPO(1); /* pad 2 */
|
|
|
|
SERCOM0->USART.CTRLB.reg =
|
|
SERCOM_USART_CTRLB_TXEN | /* tx enabled */
|
|
SERCOM_USART_CTRLB_RXEN; /* rx enabled */
|
|
|
|
SERCOM0->USART.BAUD.reg = SERCOM_USART_BAUD_FRAC_FP(0) | SERCOM_USART_BAUD_FRAC_BAUD(26);
|
|
|
|
SERCOM0->USART.CTRLA.bit.ENABLE = 1; /* activate SERCOM */
|
|
while(SERCOM0->USART.SYNCBUSY.bit.ENABLE); /* wait for SERCOM to be ready */
|
|
#endif
|
|
}
|
|
|
|
static inline void uart_send_buffer(uint8_t const *text, size_t len)
|
|
{
|
|
for (size_t i = 0; i < len; ++i) {
|
|
BOARD_SERCOM(UART_SERCOM)->USART.DATA.reg = text[i];
|
|
while((BOARD_SERCOM(UART_SERCOM)->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0);
|
|
}
|
|
}
|
|
|
|
static inline void uart_send_str(const char* text)
|
|
{
|
|
while (*text) {
|
|
BOARD_SERCOM(UART_SERCOM)->USART.DATA.reg = *text++;
|
|
while((BOARD_SERCOM(UART_SERCOM)->USART.INTFLAG.reg & SERCOM_USART_INTFLAG_TXC) == 0);
|
|
}
|
|
}
|
|
|
|
int board_uart_read(uint8_t* buf, int len)
|
|
{
|
|
(void) buf; (void) len;
|
|
return 0;
|
|
}
|
|
|
|
int board_uart_write(void const * buf, int len)
|
|
{
|
|
if (len < 0) {
|
|
uart_send_str(buf);
|
|
} else {
|
|
uart_send_buffer(buf, len);
|
|
}
|
|
return len;
|
|
}
|
|
|
|
#else // ! defined(UART_SERCOM)
|
|
|
|
static void uart_init(void) {
|
|
}
|
|
|
|
int board_uart_read(uint8_t *buf, int len) {
|
|
(void) buf;
|
|
(void) len;
|
|
return 0;
|
|
}
|
|
|
|
int board_uart_write(void const *buf, int len) {
|
|
(void) buf;
|
|
(void) len;
|
|
return 0;
|
|
}
|
|
|
|
#endif
|
|
|
|
#if CFG_TUSB_OS == OPT_OS_NONE
|
|
volatile uint32_t system_ticks = 0;
|
|
|
|
void SysTick_Handler(void) {
|
|
system_ticks++;
|
|
}
|
|
|
|
uint32_t board_millis(void) {
|
|
return system_ticks;
|
|
}
|
|
|
|
//--------------------------------------------------------------------+
|
|
//
|
|
//--------------------------------------------------------------------+
|
|
#if CFG_TUH_ENABLED && defined(CFG_TUH_MAX3421) && CFG_TUH_MAX3421
|
|
|
|
static void max3421_init(void) {
|
|
//------------- SPI Init -------------//
|
|
uint32_t const baudrate = 4000000u;
|
|
|
|
// Enable the APB clock for SERCOM
|
|
PM->APBCMASK.reg |= 1u << (PM_APBCMASK_SERCOM0_Pos + MAX3421_SERCOM_ID);
|
|
|
|
// Configure GCLK for SERCOM
|
|
// GCLK->CLKCTRL.reg = GCLK_CLKCTRL_ID_SERCOM4_CORE | GCLK_CLKCTRL_GEN_GCLK0 | GCLK_CLKCTRL_CLKEN;
|
|
GCLK->CLKCTRL.reg = GCLK_CLKCTRL_ID(GCLK_CLKCTRL_ID_SERCOM0_CORE_Val+MAX3421_SERCOM_ID) |
|
|
GCLK_CLKCTRL_GEN_GCLK0 | GCLK_CLKCTRL_CLKEN;
|
|
while (GCLK->STATUS.bit.SYNCBUSY);
|
|
|
|
Sercom* sercom = MAX3421_SERCOM;
|
|
|
|
// Disable the SPI module
|
|
sercom->SPI.CTRLA.bit.ENABLE = 0;
|
|
|
|
// Reset the SPI module
|
|
sercom->SPI.CTRLA.bit.SWRST = 1;
|
|
while (sercom->SPI.SYNCBUSY.bit.SWRST);
|
|
|
|
// Set up SPI in master mode, MSB first, SPI mode 0
|
|
sercom->SPI.CTRLA.reg = SERCOM_SPI_CTRLA_DOPO(MAX3421_TX_PAD) | SERCOM_SPI_CTRLA_DIPO(MAX3421_RX_PAD) |
|
|
SERCOM_SPI_CTRLA_MODE(3);
|
|
|
|
sercom->SPI.CTRLB.reg = SERCOM_SPI_CTRLB_CHSIZE(0) | SERCOM_SPI_CTRLB_RXEN;
|
|
while (sercom->SPI.SYNCBUSY.bit.CTRLB == 1);
|
|
|
|
// Set the baud rate
|
|
sercom->SPI.BAUD.reg = (uint8_t) (SystemCoreClock / (2 * baudrate) - 1);
|
|
|
|
// Configure PA12 as MOSI (PAD0), PA13 as SCK (PAD1), PA14 as MISO (PAD2), function C (sercom)
|
|
gpio_set_pin_direction(MAX3421_SCK_PIN, GPIO_DIRECTION_OUT);
|
|
gpio_set_pin_pull_mode(MAX3421_SCK_PIN, GPIO_PULL_OFF);
|
|
gpio_set_pin_function(MAX3421_SCK_PIN, MAX3421_SERCOM_FUNCTION);
|
|
|
|
gpio_set_pin_direction(MAX3421_MOSI_PIN, GPIO_DIRECTION_OUT);
|
|
gpio_set_pin_pull_mode(MAX3421_MOSI_PIN, GPIO_PULL_OFF);
|
|
gpio_set_pin_function(MAX3421_MOSI_PIN, MAX3421_SERCOM_FUNCTION);
|
|
|
|
gpio_set_pin_direction(MAX3421_MISO_PIN, GPIO_DIRECTION_IN);
|
|
gpio_set_pin_pull_mode(MAX3421_MISO_PIN, GPIO_PULL_OFF);
|
|
gpio_set_pin_function(MAX3421_MISO_PIN, MAX3421_SERCOM_FUNCTION);
|
|
|
|
// CS pin
|
|
gpio_set_pin_direction(MAX3421_CS_PIN, GPIO_DIRECTION_OUT);
|
|
gpio_set_pin_level(MAX3421_CS_PIN, 1);
|
|
|
|
// Enable the SPI module
|
|
sercom->SPI.CTRLA.bit.ENABLE = 1;
|
|
while (sercom->SPI.SYNCBUSY.bit.ENABLE);
|
|
|
|
//------------- External Interrupt -------------//
|
|
|
|
// Enable the APB clock for EIC (External Interrupt Controller)
|
|
PM->APBAMASK.reg |= PM_APBAMASK_EIC;
|
|
|
|
// Configure GCLK for EIC
|
|
GCLK->CLKCTRL.reg = GCLK_CLKCTRL_ID_EIC | GCLK_CLKCTRL_GEN_GCLK0 | GCLK_CLKCTRL_CLKEN;
|
|
while (GCLK->STATUS.bit.SYNCBUSY);
|
|
|
|
// Configure PA20 as an input with function A (external interrupt)
|
|
gpio_set_pin_direction(MAX3421_INTR_PIN, GPIO_DIRECTION_IN);
|
|
gpio_set_pin_pull_mode(MAX3421_INTR_PIN, GPIO_PULL_UP);
|
|
gpio_set_pin_function(MAX3421_INTR_PIN, 0);
|
|
|
|
// Disable EIC
|
|
EIC->CTRL.bit.ENABLE = 0;
|
|
while (EIC->STATUS.bit.SYNCBUSY);
|
|
|
|
// Configure EIC to trigger on falling edge
|
|
uint8_t const sense_shift = MAX3421_INTR_EIC_ID * 4;
|
|
EIC->CONFIG[0].reg &= ~(7 << sense_shift);
|
|
EIC->CONFIG[0].reg |= 2 << sense_shift;
|
|
|
|
// Enable External Interrupt
|
|
EIC->INTENSET.reg = EIC_INTENSET_EXTINT(1 << MAX3421_INTR_EIC_ID);
|
|
|
|
// Enable EIC
|
|
EIC->CTRL.bit.ENABLE = 1;
|
|
while (EIC->STATUS.bit.SYNCBUSY);
|
|
}
|
|
|
|
void EIC_Handler(void) {
|
|
// Clear the interrupt flag
|
|
EIC->INTFLAG.reg = EIC_INTFLAG_EXTINT(1 << MAX3421_INTR_EIC_ID);
|
|
|
|
// Call the TinyUSB interrupt handler
|
|
tuh_int_handler(1);
|
|
}
|
|
|
|
void tuh_max3421_int_api(uint8_t rhport, bool enabled) {
|
|
(void) rhport;
|
|
|
|
if (enabled) {
|
|
NVIC_EnableIRQ(EIC_IRQn);
|
|
} else {
|
|
NVIC_DisableIRQ(EIC_IRQn);
|
|
}
|
|
}
|
|
|
|
void tuh_max3421_spi_cs_api(uint8_t rhport, bool active) {
|
|
(void) rhport;
|
|
gpio_set_pin_level(MAX3421_CS_PIN, active ? 0 : 1);
|
|
}
|
|
|
|
bool tuh_max3421_spi_xfer_api(uint8_t rhport, uint8_t const *tx_buf, size_t tx_len, uint8_t *rx_buf, size_t rx_len) {
|
|
(void) rhport;
|
|
|
|
Sercom* sercom = MAX3421_SERCOM;
|
|
|
|
size_t count = 0;
|
|
while (count < tx_len || count < rx_len) {
|
|
// Wait for the transmit buffer to be empty
|
|
while (!sercom->SPI.INTFLAG.bit.DRE);
|
|
|
|
// Write data to be transmitted
|
|
uint8_t data = 0x00;
|
|
if (count < tx_len) {
|
|
data = tx_buf[count];
|
|
}
|
|
|
|
sercom->SPI.DATA.reg = (uint32_t) data;
|
|
|
|
// Wait for the receive buffer to be filled
|
|
while (!sercom->SPI.INTFLAG.bit.RXC);
|
|
|
|
// Read received data
|
|
data = (uint8_t) sercom->SPI.DATA.reg;
|
|
if (count < rx_len) {
|
|
rx_buf[count] = data;
|
|
}
|
|
|
|
count++;
|
|
}
|
|
|
|
// wait for bus idle and clear flags
|
|
while (!(sercom->SPI.INTFLAG.reg & (SERCOM_SPI_INTFLAG_TXC | SERCOM_SPI_INTFLAG_DRE)));
|
|
sercom->SPI.INTFLAG.reg = SERCOM_SPI_INTFLAG_TXC | SERCOM_SPI_INTFLAG_DRE;
|
|
|
|
return true;
|
|
}
|
|
|
|
#endif
|
|
|
|
|
|
#endif
|