hathach
89bf4fa04c
Merge branch 'master' into house-keeping
2020-10-09 13:49:05 +07:00
hathach
344d589a35
use pyocd for iMXRT boards
2020-10-09 13:48:08 +07:00
Ha Thach
6f8d0d2c34
Merge pull request #531 from majbthrd/mimxrt1010stack
...
mimxrt1010_evk: double stack size to allow net_lwip_webserver to run
2020-10-09 00:48:08 +07:00
hathach
e8b3af038e
add flash-pyocd support
2020-10-08 17:19:48 +07:00
hathach
ec018fbf4e
clean up jlink default interface
2020-10-08 17:17:37 +07:00
Ha Thach
30c23719f6
Merge pull request #528 from jgressmann/port-atsame51-to-tinyusb
...
Adds files for the open source D5035-01 hardware
2020-10-08 13:46:41 +07:00
Peter Lawrence
ed94e944c9
mimxrt1010_evk: double stack size to allow net_lwip_webserver to run
2020-10-07 13:15:58 -05:00
Jean Gressmann
3295b5692b
D5035-01 bsp: fix typo
2020-10-07 19:27:55 +02:00
Jean Gressmann
f02b5bfdfa
Address various issues raised by TinyUSB maintainers
...
- remove OPT_MCU_SAME51 in favor of OPT_MCU_SAME5X and working around
differences in the Atmel bsp locally in the D5035-01 bsp.
- rename board folder to d5035_01 for consistency with other boards
2020-10-07 19:19:30 +02:00
hathach
d407341d1e
fix usb pin config with idf latest
2020-10-07 19:15:53 +07:00
Jean Gressmann
f92fe1e23e
D5035-01: more natural Makefile variable use
2020-10-06 17:39:36 +02:00
Jean Gressmann
1730a5dcba
D5035-01 bsp: fix paths, default to hw rev 1 (automated build)
2020-10-05 20:30:04 +02:00
Jean Gressmann
61aacf07d6
Adds files for the open source D5035-01 hardware
...
The board's files are here:
https://github.com/RudolphRiedel/USB_CAN-FD
2020-10-05 18:35:35 +02:00
hathach
10d5dac913
update doc
2020-09-04 11:20:09 +07:00
hathach
4ecedc70c8
fix vector assign
2020-09-03 23:48:56 +07:00
hathach
1d83ad0ebb
rename tuh_isr/hcd_isr to tuh_int_handler/hcd_int_handler
2020-09-03 13:12:25 +07:00
hathach
1cee2da7b9
revert to use __USE_LPCOPEN
...
properly init fpu on LPC M4
2020-09-03 12:58:09 +07:00
hathach
c7d2d0ae29
ohci work, tested with lpc1769
2020-09-02 01:40:04 +07:00
hathach
52b5748e8d
fix ci build
2020-09-02 00:56:43 +07:00
hathach
c492aef4c7
revert to use float-abi
...
define __USE_CMSIS instead of __USE_LPCOPEN will have startup enable FPU
on startup properly. Although it is only relevant to lpx43/40 series,
change all to __USE_CMSIS for consistency
2020-09-02 00:46:08 +07:00
hathach
84425c50b3
add more logging to host stack
...
tested host with lpc4357, don't use fpu with lpc m4 since it seems to
cause hardfault (stack does not make use of fpu anyway).
2020-09-01 19:16:50 +07:00
hathach
f4e3c6fd8e
clean up
2020-09-01 17:12:31 +07:00
hathach
be708bb8a4
Merge branch 'master' into update-host
2020-09-01 12:02:25 +07:00
hathach
7a443d6bea
add itsybitsy nrf52840 board support
2020-08-27 16:40:24 +07:00
hathach
9d3a9cf546
add OPT_MCU_SAMD11
...
skip ci build for example that need more ROM/RAM could fit into SAMD11
2020-08-22 18:46:19 +07:00
Katherine Temkin
91f7ce9769
add support for SAMD11 devices / add samd11_xplained board
2020-08-21 13:15:07 -06:00
hathach
76fe8ac612
fix samg55 ci build
2020-08-21 12:19:38 +07:00
hathach
0407cfe16c
fix samd21 race condition with setup packet
...
reproduced with Adafruit_TinyUSB_ArduinoCore port commit 11d669b4d2a40eb2fc5e51b2a9707a6de9d42363 and SAMD BSP 1.6.1
2020-07-23 01:39:15 +07:00
Ha Thach
798fad397a
Merge pull request #464 from hathach/improve-highspeed
...
Better support highspeed mode
2020-07-19 13:24:57 +07:00
hathach
dc00f0cae1
update link speed detection for nuc505
2020-07-16 20:44:06 +07:00
Kate Temkin
9181ce55fb
add BSP for Great Scott Gadgets' LUNA boards (SAMD21)
2020-07-14 21:51:31 -06:00
hathach
0fd074afd8
change REDUCE_SPEED=0/1 to explicitly SPEED=high/full
...
update readme, boards.md to add link to new stm boards
2020-07-08 16:29:48 +07:00
Uwe Bonnes
8f433e67ac
Add stm32l4r5nucleo. USB and UARTwork.
...
USB runs from LSE stabilized MSI48
LPUART on PORTG needs VDDIO2 enabled.
2020-07-03 16:34:08 +02:00
Uwe Bonnes
11c6d4cdae
stlinkv3mini: Only OTG_HS has connector.
2020-07-03 10:59:02 +02:00
Uwe Bonnes
5c24d5ca72
stm32h745disco: HAL_PWREx_EnableUSBVoltageDetector() is needed for hot replug.
2020-07-03 10:53:51 +02:00
Uwe Bonnes
4b7539bd63
stm32h745disco: Only OTG_FS is available. Does not enumerate on replug yet.
2020-07-03 10:53:51 +02:00
Uwe Bonnes
fd38178189
STM32/OTG_HS: Allow OTG_HS port to run at FS speed.
...
Add "REDUCE_SPEED=1" to the compile options.
2020-07-03 10:52:57 +02:00
hathach
4cec866994
correct HSE_VALUE in hal_conf
...
- although it is define in CFLAGS, it is worth to correct to be
consistent with other build
- extract set_speed()
2020-07-02 14:57:00 +07:00
hathach
9a290febcd
change default port some stm bsp
...
- f769disco default port is highspeed port1
- remove PORT0 on stlink since the board only populated HS connector
2020-07-02 11:58:40 +07:00
hathach
c2289777f7
Merge branch 'add-stm-hs' of github.com:hathach/tinyusb into add-stm-hs
2020-07-01 23:53:33 +07:00
Uwe Bonnes
5b3a67a1e2
Add bsp for stlinkv3mini.
2020-07-01 15:42:53 +02:00
hathach
77315ba7ce
added uart for h743
2020-07-01 18:27:48 +07:00
hathach
a512a31c9d
Merge branch 'master' into add-stm-hs
2020-07-01 17:58:02 +07:00
Ha Thach
530b0099a5
Merge pull request #439 from UweBonnes/add-stm-hs
...
Add stm hs
2020-07-01 13:09:07 +07:00
hathach
463e978134
added DA14695 DK USB bsp
2020-07-01 12:47:14 +07:00
hathach
2f946e765d
rename file
2020-07-01 12:42:12 +07:00
hathach
0477446224
more clean up
2020-06-30 16:31:59 +07:00
hathach
f3a88477dc
revert rhport config in nxp mcus
2020-06-30 16:18:43 +07:00
Uwe Bonnes
30a18e2605
stm32f723disco: USB HS enumerates.
2020-06-30 11:07:53 +02:00
Uwe Bonnes
f6660c39a1
Add Stm32F7xxdisco board support files
...
Status with examples/device/cdc_msc:
- make BOARD=stm32f723disco => OK
- make BOARD=stm32f723disco PORT=1 => No Reaction
- make BOARD=stm32f746disco => OK
- make BOARD=stm32f746disco PORT=1 => Hangs during enumeration
- make BOARD=stm32f769disco => Hangs during enumeration
2020-06-30 11:02:38 +02:00