include clean up

src/class/audio/audio_device.c

@@ -55,9 +55,10 @@
 //--------------------------------------------------------------------+
 // INCLUDE
 //--------------------------------------------------------------------+
+#include "device/usbd.h"
 #include "device/usbd_pvt.h"
+
 #include "audio_device.h"
-//#include "common/tusb_fifo.h"
 
 //--------------------------------------------------------------------+
 // MACRO CONSTANT TYPEDEF

src/class/audio/audio_device.h

@@ -28,10 +28,6 @@
 #ifndef _TUSB_AUDIO_DEVICE_H_
 #define _TUSB_AUDIO_DEVICE_H_
 
-#include "assert.h"
-#include "common/tusb_common.h"
-#include "device/usbd.h"
-
 #include "audio.h"
 
 //--------------------------------------------------------------------+

src/class/bth/bth_device.c

@@ -32,7 +32,6 @@
 // INCLUDE
 //--------------------------------------------------------------------+
 #include "bth_device.h"
-#include <common/tusb_types.h>
 #include <device/usbd_pvt.h>
 
 //--------------------------------------------------------------------+

src/class/cdc/cdc_device.c

@@ -28,9 +28,11 @@
 
 #if (TUSB_OPT_DEVICE_ENABLED && CFG_TUD_CDC)
 
-#include "cdc_device.h"
+#include "device/usbd.h"
 #include "device/usbd_pvt.h"
 
+#include "cdc_device.h"
+
 //--------------------------------------------------------------------+
 // MACRO CONSTANT TYPEDEF
 //--------------------------------------------------------------------+

src/class/cdc/cdc_device.h

@@ -28,7 +28,6 @@
 #define _TUSB_CDC_DEVICE_H_
 
 #include "common/tusb_common.h"
-#include "device/usbd.h"
 #include "cdc.h"
 
 //--------------------------------------------------------------------+

src/class/dfu/dfu_device.c

@@ -28,9 +28,11 @@
 
 #if (TUSB_OPT_DEVICE_ENABLED && CFG_TUD_DFU_MODE)
 
-#include "dfu_device.h"
+#include "device/usbd.h"
 #include "device/usbd_pvt.h"
 
+#include "dfu_device.h"
+
 //--------------------------------------------------------------------+
 // MACRO CONSTANT TYPEDEF
 //--------------------------------------------------------------------+

src/class/dfu/dfu_device.h

@@ -27,8 +27,6 @@
 #ifndef _TUSB_DFU_DEVICE_H_
 #define _TUSB_DFU_DEVICE_H_
 
-#include "common/tusb_common.h"
-#include "device/usbd.h"
 #include "dfu.h"
 
 #ifdef __cplusplus

src/class/dfu/dfu_rt_device.c

@@ -28,9 +28,11 @@
 
 #if (TUSB_OPT_DEVICE_ENABLED && CFG_TUD_DFU_RUNTIME)
 
-#include "dfu_rt_device.h"
+#include "device/usbd.h"
 #include "device/usbd_pvt.h"
 
+#include "dfu_rt_device.h"
+
 //--------------------------------------------------------------------+
 // MACRO CONSTANT TYPEDEF
 //--------------------------------------------------------------------+

src/class/dfu/dfu_rt_device.h

@@ -27,8 +27,6 @@
 #ifndef _TUSB_DFU_RT_DEVICE_H_
 #define _TUSB_DFU_RT_DEVICE_H_
 
-#include "common/tusb_common.h"
-#include "device/usbd.h"
 #include "dfu.h"
 
 #ifdef __cplusplus

src/class/hid/hid_device.c

@@ -31,10 +31,11 @@
 //--------------------------------------------------------------------+
 // INCLUDE
 //--------------------------------------------------------------------+
-#include "common/tusb_common.h"
+#include "device/usbd.h"
-#include "hid_device.h"
 #include "device/usbd_pvt.h"
 
+#include "hid_device.h"
+
 //--------------------------------------------------------------------+
 // MACRO CONSTANT TYPEDEF
 //--------------------------------------------------------------------+

src/class/hid/hid_device.h

@@ -27,8 +27,6 @@
 #ifndef _TUSB_HID_DEVICE_H_
 #define _TUSB_HID_DEVICE_H_
 
-#include "common/tusb_common.h"
-#include "device/usbd.h"
 #include "hid.h"
 
 #ifdef __cplusplus

src/class/midi/midi_device.c

@@ -31,10 +31,11 @@
 //--------------------------------------------------------------------+
 // INCLUDE
 //--------------------------------------------------------------------+
-#include "midi_device.h"
+#include "device/usbd.h"
-#include "class/audio/audio.h"
 #include "device/usbd_pvt.h"
 
+#include "midi_device.h"
+
 //--------------------------------------------------------------------+
 // MACRO CONSTANT TYPEDEF
 //--------------------------------------------------------------------+

src/class/midi/midi_device.h

@@ -27,9 +27,6 @@
 #ifndef _TUSB_MIDI_DEVICE_H_
 #define _TUSB_MIDI_DEVICE_H_
 
-#include "common/tusb_common.h"
-#include "device/usbd.h"
-
 #include "class/audio/audio.h"
 #include "midi.h"
 

src/class/msc/msc_device.c

@@ -28,11 +28,12 @@
 
 #if (TUSB_OPT_DEVICE_ENABLED && CFG_TUD_MSC)
 
-#include "common/tusb_common.h"
+#include "device/usbd.h"
-#include "msc_device.h"
 #include "device/usbd_pvt.h"
 #include "device/dcd.h"         // for faking dcd_event_xfer_complete
 
+#include "msc_device.h"
+
 //--------------------------------------------------------------------+
 // MACRO CONSTANT TYPEDEF
 //--------------------------------------------------------------------+

src/class/msc/msc_device.h

@@ -28,7 +28,6 @@
 #define _TUSB_MSC_DEVICE_H_
 
 #include "common/tusb_common.h"
-#include "device/usbd.h"
 #include "msc.h"
 
 #ifdef __cplusplus
@@ -51,53 +50,45 @@
 
 TU_VERIFY_STATIC(CFG_TUD_MSC_EP_BUFSIZE < UINT16_MAX, "Size is not correct");
 
-/** \addtogroup ClassDriver_MSC
+//--------------------------------------------------------------------+
- *  @{
+// Application API
- * \defgroup MSC_Device Device
+//--------------------------------------------------------------------+
- *  @{ */
 
+// Set SCSI sense response
 bool tud_msc_set_sense(uint8_t lun, uint8_t sense_key, uint8_t add_sense_code, uint8_t add_sense_qualifier);
 
 //--------------------------------------------------------------------+
 // Application Callbacks (WEAK is optional)
 //--------------------------------------------------------------------+
 
-/**
+// Invoked when received SCSI READ10 command
- * Invoked when received \ref SCSI_CMD_READ_10 command
+// - Address = lba * BLOCK_SIZE + offset
- * \param[in]   lun         Logical unit number
+//   - offset is only needed if CFG_TUD_MSC_EP_BUFSIZE is smaller than BLOCK_SIZE.
- * \param[in]   lba         Logical Block Address to be read
+//
- * \param[in]   offset      Byte offset from LBA
+// - Application fill the buffer (up to bufsize) with address contents and return number of read byte. If
- * \param[out]  buffer      Buffer which application need to update with the response data.
+//   - read < bufsize : These bytes are transferred first and callback invoked again for remaining data.
- * \param[in]   bufsize     Requested bytes
+//
- *
+//   - read == 0      : Indicate application is not ready yet e.g disk I/O busy.
- * \return      Number of byte read, if it is less than requested bytes by \a \b bufsize. Tinyusb will transfer
+//                      Callback invoked again with the same parameters later on.
- *              this amount first and invoked this again for remaining data.
+//
- *
+//   - read < 0       : Indicate application error e.g invalid address. This request will be STALLed
- * \retval      zero        Indicate application is not ready yet to response e.g disk I/O is not complete.
+//                      and return failed status in command status wrapper phase.
- *                          tinyusb will invoke this callback with the same parameters again some time later.
- *
- * \retval      negative    Indicate error e.g reading disk I/O. tinyusb will \b STALL the corresponding
- *                          endpoint and return failed status in command status wrapper phase.
- */
 int32_t tud_msc_read10_cb (uint8_t lun, uint32_t lba, uint32_t offset, void* buffer, uint32_t bufsize);
 
-/**
+// Invoked when received SCSI WRITE10 command
- * Invoked when received \ref SCSI_CMD_WRITE_10 command
+// - Address = lba * BLOCK_SIZE + offset
- * \param[in]   lun         Logical unit number
+//   - offset is only needed if CFG_TUD_MSC_EP_BUFSIZE is smaller than BLOCK_SIZE.
- * \param[in]   lba         Logical Block Address to be write
+//
- * \param[in]   offset      Byte offset from LBA
+// - Application write data from buffer to address contents (up to bufsize) and return number of written byte. If
- * \param[out]  buffer      Buffer which holds written data.
+//   - write < bufsize : callback invoked again with remaining data later on.
- * \param[in]   bufsize     Requested bytes
+//
- *
+//   - write == 0      : Indicate application is not ready yet e.g disk I/O busy.
- * \return      Number of byte written, if it is less than requested bytes by \a \b bufsize. Tinyusb will proceed with
+//                       Callback invoked again with the same parameters later on.
- *              other work and invoked this again with adjusted parameters.
+//
- *
+//   - write < 0       : Indicate application error e.g invalid address. This request will be STALLed
- * \retval      zero        Indicate application is not ready yet e.g disk I/O is not complete.
+//                       and return failed status in command status wrapper phase.
- *                          Tinyusb will invoke this callback with the same parameters again some time later.
+//
- *
+// TODO change buffer to const uint8_t*
- * \retval      negative    Indicate error writing disk I/O. Tinyusb will \b STALL the corresponding
- *                          endpoint and return failed status in command status wrapper phase.
- */
 int32_t tud_msc_write10_cb (uint8_t lun, uint32_t lba, uint32_t offset, uint8_t* buffer, uint32_t bufsize);
 
 // Invoked when received SCSI_CMD_INQUIRY
@@ -152,9 +143,6 @@ TU_ATTR_WEAK void tud_msc_scsi_complete_cb(uint8_t lun, uint8_t const scsi_cmd[1
 // Hook to make a mass storage device read-only. TODO remove
 TU_ATTR_WEAK bool tud_msc_is_writable_cb(uint8_t lun);
 
-/** @} */
-/** @} */
-
 //--------------------------------------------------------------------+
 // Internal Class Driver API
 //--------------------------------------------------------------------+

src/class/net/net_device.c

@@ -29,8 +29,10 @@
 
 #if ( TUSB_OPT_DEVICE_ENABLED && CFG_TUD_NET )
 
-#include "net_device.h"
+#include "device/usbd.h"
 #include "device/usbd_pvt.h"
+
+#include "net_device.h"
 #include "rndis_protocol.h"
 
 void rndis_class_set_handler(uint8_t *data, int size); /* found in ./misc/networking/rndis_reports.c */

src/class/net/net_device.h

@@ -28,7 +28,6 @@
 #ifndef _TUSB_NET_DEVICE_H_
 #define _TUSB_NET_DEVICE_H_
 
-#include "common/tusb_common.h"
 #include "device/usbd.h"
 #include "class/cdc/cdc.h"
 

src/class/usbtmc/usbtmc_device.c

@@ -77,15 +77,11 @@
 
 #if (TUSB_OPT_DEVICE_ENABLED && CFG_TUD_USBTMC)
 
-#include <string.h>
-#include "usbtmc.h"
-#include "usbtmc_device.h"
 #include "device/usbd.h"
-#include "osal/osal.h"
-
-// FIXME: I shouldn't need to include _pvt headers, but it is necessary for usbd_edpt_xfer, _stall, and _busy
 #include "device/usbd_pvt.h"
 
+#include "usbtmc_device.h"
+
 #ifdef xDEBUG
 #include "uart_util.h"
 static char logMsg[150];

src/class/vendor/vendor_device.c

@@ -28,9 +28,11 @@
 
 #if (TUSB_OPT_DEVICE_ENABLED && CFG_TUD_VENDOR)
 
-#include "vendor_device.h"
+#include "device/usbd.h"
 #include "device/usbd_pvt.h"
 
+#include "vendor_device.h"
+
 //--------------------------------------------------------------------+
 // MACRO CONSTANT TYPEDEF
 //--------------------------------------------------------------------+

src/class/vendor/vendor_device.h

@@ -28,7 +28,6 @@
 #define _TUSB_VENDOR_DEVICE_H_
 
 #include "common/tusb_common.h"
-#include "device/usbd.h"
 
 #ifndef CFG_TUD_VENDOR_EPSIZE
 #define CFG_TUD_VENDOR_EPSIZE     64

src/common/tusb_common.h

@@ -72,10 +72,11 @@
 #include "tusb_option.h"
 #include "tusb_compiler.h"
 #include "tusb_verify.h"
-#include "tusb_error.h" // TODO remove
-#include "tusb_timeout.h"
 #include "tusb_types.h"
 
+#include "tusb_error.h"   // TODO remove
+#include "tusb_timeout.h" // TODO remove
+
 //------------- Mem -------------//
 #define tu_memclr(buffer, size)  memset((buffer), 0, (size))
 #define tu_varclr(_var)          tu_memclr(_var, sizeof(*(_var)))

src/device/dcd.h

@@ -28,6 +28,7 @@
 #define _TUSB_DCD_H_
 
 #include "common/tusb_common.h"
+#include "osal/osal.h"
 #include "common/tusb_fifo.h"
 
 #ifdef __cplusplus