kingkevin
/
passkey_fw
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

adding keil mcb4300 support 

- implement board_leds & board_uart routines
This commit is contained in:
hathach 2013-05-06 15:06:08 +07:00
parent 120db28a17
commit 4fa7f77ee2
8 changed files with 1360 additions and 35 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
demos/bsp/boards/board.h
View File

@ -59,11 +59,19 @@
#include <stdint.h>
#include "tusb.h"
//--------------------------------------------------------------------+
// BOARD DEFINE
//--------------------------------------------------------------------+
#define BOARD_AT86RF2XX 1
#define BOARD_LPCXPRESSO1347 2
#define BOARD_NGX4330 3
#define BOARD_EA4357 4
#define BOARD_MCB4300 5
//--------------------------------------------------------------------+
// PRINTF TARGET DEFINE
//--------------------------------------------------------------------+
#define PRINTF_TARGET_DEBUG_CONSOLE 1 // IDE semihosting console
#define PRINTF_TARGET_UART 2
#define PRINTF_TARGET_SWO 3 // aka SWV, ITM
@ -81,6 +89,8 @@
#include "board_at86rf2xx.h"
#elif BOARD == BOARD_EA4357
#include "embedded_artists/board_ea4357.h"
#elif BOARD == BOARD_MCB4300
#include "keil/board_mcb4300.h"
#else
#error BOARD is not defined or supported yet
#endif

19
demos/bsp/boards/embedded_artists/board_ea4357.c
View File

@ -40,15 +40,16 @@
#if BOARD == BOARD_EA4357
#include "common/assertion.h" // TODO there is hal_debugger_ in assertion
#define UART_PORT LPC_USART0
#define BOARD_UART_PORT LPC_USART0
#define BOARD_UART_PIN_PORT 0x0f
#define BOARD_UART_PIN_TX 10 // PF.10 : UART0_TXD
#define BOARD_UART_PIN_RX 11 // PF.11 : UART0_RXD
void board_init(void)
{
SystemInit();
CGU_Init();
SysTick_Config(CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE) / CFG_TICKS_PER_SECOND); // 1 msec tick timer
// USB0 Power: EA4357 channel B U20 GPIO26 active low (base board), P2_3 on LPC4357
@ -68,16 +69,16 @@ void board_init(void)
#if CFG_UART_ENABLE
//------------- UART init -------------//
scu_pinmux(0xF ,10 , MD_PDN, FUNC1); // PF.10 : UART0_TXD
scu_pinmux(0xF ,11 , MD_PLN|MD_EZI|MD_ZI, FUNC1); // PF.11 : UART0_RXD
scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN , FUNC1);
scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN|MD_EZI|MD_ZI, FUNC1);
UART_CFG_Type UARTConfigStruct;
UART_ConfigStructInit(&UARTConfigStruct);
UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE;
UARTConfigStruct.Clock_Speed = 0;
UART_Init(UART_PORT, &UARTConfigStruct);
UART_TxCmd(UART_PORT, ENABLE); // Enable UART Transmit
UART_Init(BOARD_UART_PORT, &UARTConfigStruct);
UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit
#endif
#if CFG_PRINTF_TARGET == PRINTF_TARGET_SWO
@ -98,12 +99,12 @@ void board_leds(uint32_t on_mask, uint32_t off_mask)
#if CFG_UART_ENABLE
uint32_t board_uart_send(uint8_t *buffer, uint32_t length)
{
return UART_Send(UART_PORT, buffer, length, BLOCKING);
return UART_Send(BOARD_UART_PORT, buffer, length, BLOCKING);
}
uint32_t board_uart_recv(uint8_t *buffer, uint32_t length)
{
return UART_Receive(UART_PORT, buffer, length, BLOCKING);
return UART_Receive(BOARD_UART_PORT, buffer, length, BLOCKING);
}
#endif

4
demos/bsp/boards/embedded_artists/board_ea4357.h
View File

@ -65,10 +65,6 @@
#include "oem_base_board/pca9532.h" // LEDs
#define CFG_LED_NUMBER 0
#define CFG_LED_ON (1)
#define CFG_LED_OFF (0)
#define CFG_PRINTF_TARGET PRINTF_TARGET_UART
#ifdef __cplusplus

144
demos/bsp/boards/keil/board_mcb4300.c Normal file
View File

@ -0,0 +1,144 @@
/**************************************************************************/
/*!
@file board_mcb4300.c
@author hathach (tinyusb.org)
@section LICENSE
Software License Agreement (BSD License)
Copyright (c) 2013, hathach (tinyusb.org)
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holders nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This file is part of the tinyusb stack.
*/
/**************************************************************************/
#include "../board.h"
#if BOARD == BOARD_MCB4300
//--------------------------------------------------------------------+
// INCLUDE
//--------------------------------------------------------------------+
#define BOARD_MAX_LEDS 8
#define BOARD_UART_PORT LPC_USART0
#define BOARD_UART_PIN_PORT 2
#define BOARD_UART_PIN_TX 0
#define BOARD_UART_PIN_RX 1
//--------------------------------------------------------------------+
// MACRO CONSTANT TYPEDEF
//--------------------------------------------------------------------+
static const uint8_t ledports[] = {6, 6, 6, 6, 6, 4, 4, 4};
static const uint8_t ledbits[] = {24, 25, 26, 27, 28, 12, 13, 14};
const static struct {
uint8_t port;
uint8_t pin;
}leds[BOARD_MAX_LEDS] = {
{6, 24}, {6, 25}, {6, 26}, {6, 27},
{4, 28}, {4, 12}, {4, 13}, {4, 14}};
//--------------------------------------------------------------------+
// INTERNAL OBJECT & FUNCTION DECLARATION
//--------------------------------------------------------------------+
//--------------------------------------------------------------------+
// IMPLEMENTATION
//--------------------------------------------------------------------+
void board_init(void)
{
SystemInit();
CGU_Init();
SysTick_Config(CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE) / CFG_TICKS_PER_SECOND); // 1 msec tick timer
//------------- USB Bus power HOST ONLY-------------//
//scu_pinmux(0x6, 3, MD_PUP | MD_EZI, FUNC1); // P6_3 USB0_PWR_EN, USB0 VBus function
// Keil VBUS0 on schematic is F1
// TODO USB1 P2_5
scu_pinmux(0x2, 5, MD_PLN | MD_EZI | MD_ZI, FUNC2); // USB1_VBUS monitor presence, must be high for bus reset occur
//scu_pinmux(0x9, 5, MD_PUP | MD_EZI, FUNC2); // P9_5 USB1_PWR_EN, USB1 VBus function
// Keil VBUS1 on schematics is P2_5
//------------- LEDs init, J21 must be installed -------------//
for(uint32_t i=0; i<BOARD_MAX_LEDS; i++)
{
// TODO consider as default pinmux is to GPIO --> no mux
GPIO_SetDir(leds[i].port, BIT_(leds[i].pin), 1); // output
}
#if CFG_UART_ENABLE
//------------- UART init -------------//
scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN , FUNC1);
scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN|MD_EZI|MD_ZI, FUNC1);
UART_CFG_Type UARTConfigStruct;
UART_ConfigStructInit(&UARTConfigStruct);
UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE;
UARTConfigStruct.Clock_Speed = 0;
UART_Init(BOARD_UART_PORT, &UARTConfigStruct);
UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit
#endif
}
//--------------------------------------------------------------------+
// LEDS
//--------------------------------------------------------------------+
void board_leds(uint32_t on_mask, uint32_t off_mask)
{
for (uint32_t i=0; i<BOARD_MAX_LEDS; i++)
{
if ( on_mask & BIT_(i))
{
GPIO_SetValue(leds[i].port, BIT_(leds[i].pin));
}else if ( off_mask & BIT_(i)) // on_mask take precedence over off_mask
{
GPIO_ClearValue(leds[i].port, BIT_(leds[i].pin));
}
}
}
//--------------------------------------------------------------------+
// UART
//--------------------------------------------------------------------+
#if CFG_UART_ENABLE
uint32_t board_uart_send(uint8_t *buffer, uint32_t length)
{
return UART_Send(BOARD_UART_PORT, buffer, length, BLOCKING);
}
uint32_t board_uart_recv(uint8_t *buffer, uint32_t length)
{
return UART_Receive(BOARD_UART_PORT, buffer, length, BLOCKING);
}
#endif
#endif

68
demos/bsp/boards/keil/board_mcb4300.h Normal file
View File

@ -0,0 +1,68 @@
/**************************************************************************/
/*!
@file board_mcb4300.h
@author hathach (tinyusb.org)
@section LICENSE
Software License Agreement (BSD License)
Copyright (c) 2013, hathach (tinyusb.org)
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holders nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This file is part of the tinyusb stack.
*/
/**************************************************************************/
/** \ingroup TBD
* \defgroup TBD
* \brief TBD
*
* @{
*/
#ifndef _TUSB_BOARD_MCB4300_H_
#define _TUSB_BOARD_MCB4300_H_
#include "LPC43xx.h"
#include "lpc43xx_scu.h"
#include "lpc43xx_cgu.h"
#include "lpc43xx_gpio.h"
#include "lpc43xx_uart.h"
#ifdef __cplusplus
extern "C" {
#endif
#define CFG_PRINTF_TARGET PRINTF_TARGET_UART
#ifdef __cplusplus
}
#endif
#endif /* _TUSB_BOARD_MCB4300_H_ */
/** @} */

27
demos/bsp/boards/ngx/board_ngx4330.c
View File

@ -40,16 +40,6 @@
#if BOARD == BOARD_NGX4330
#include "lpc43xx_uart.h"
#include "lpc43xx_scu.h"
#include "lpc43xx_cgu.h"
#include "lpc43xx_gpio.h"
#include "lpc43xx_timer.h"
#include "lpc43xx_i2c.h"
#include "lpc43xx_gpdma.h"
#include "lpc43xx_i2s.h"
#include "lpc43xx_emc.h"
#define BOARD_MAX_LEDS 2
const static struct {
uint8_t port;
@ -93,17 +83,26 @@ void board_init(void)
}
void board_leds(uint32_t mask, uint32_t state)
//--------------------------------------------------------------------+
// LEDS
//--------------------------------------------------------------------+
void board_leds(uint32_t on_mask, uint32_t off_mask)
{
for(uint8_t i=0; i<BOARD_MAX_LEDS; i++)
for (uint32_t i=0; i<BOARD_MAX_LEDS; i++)
{
if ( mask & BIT_(i) )
if ( on_mask & BIT_(i))
{
(mask & state) ? GPIO_SetValue(leds[i].port, BIT_(leds[i].pin)) : GPIO_ClearValue(leds[i].port, BIT_(leds[i].pin)) ;
GPIO_SetValue(leds[i].port, BIT_(leds[i].pin));
}else if ( off_mask & BIT_(i)) // on_mask take precedence over off_mask
{
GPIO_ClearValue(leds[i].port, BIT_(leds[i].pin));
}
}
}
//--------------------------------------------------------------------+
// UART
//--------------------------------------------------------------------+
uint32_t board_uart_send(uint8_t *p_buffer, uint32_t length)
{
return UART_Send((LPC_USARTn_Type*) LPC_USART0, p_buffer, length, BLOCKING);

10
demos/bsp/boards/ngx/board_ngx4330.h
View File

@ -52,19 +52,15 @@
#ifndef _TUSB_BOARD_NGX4330_H_
#define _TUSB_BOARD_NGX4330_H_
#ifdef __cplusplus
extern "C" {
#endif
#include "LPC43xx.h"
#include "lpc43xx_scu.h"
#include "lpc43xx_cgu.h"
#include "lpc43xx_gpio.h"
#include "lpc43xx_uart.h"
#define CFG_LED_NUMBER 0
#define CFG_LED_ON (1)
#define CFG_LED_OFF (0)
#ifdef __cplusplus
extern "C" {
#endif
#define CFG_PRINTF_TARGET PRINTF_TARGET_DEBUG_CONSOLE

1113
demos/host/host_os_none/.cproject
View File

File diff suppressed because it is too large Load Diff