fix compiling error for tests project

start to add support for host hid mouse
This commit is contained in:
hathach 2013-04-07 03:53:53 +07:00
parent 1776bb53f6
commit 24ade0458e
4 changed files with 33 additions and 3 deletions

View File

@ -45,4 +45,11 @@
#include "mock_hcd.h"
#include "descriptor_test.h"
void setUp(void)
{
}
void tearDown(void)
{
}

View File

@ -72,6 +72,7 @@
//------------- CLASS -------------//
#define TUSB_CFG_HOST_HID_KEYBOARD 1
#define TUSB_CFG_HOST_HID_MOUSE 1
#define HOST_HCD_XFER_INTERRUPT
#define HOST_HCD_XFER_BULK

View File

@ -123,6 +123,27 @@ static inline void hidh_keyboard_close(uint8_t dev_addr)
#endif
//--------------------------------------------------------------------+
// MOUSE
//--------------------------------------------------------------------+
#if TUSB_CFG_HOST_HID_MOUSE
//------------- Internal API -------------//
static inline tusb_error_t hidh_mouse_open(uint8_t dev_addr, tusb_descriptor_endpoint_t const *p_endpoint_desc) ATTR_ALWAYS_INLINE;
static inline tusb_error_t hidh_mouse_open(uint8_t dev_addr, tusb_descriptor_endpoint_t const *p_endpoint_desc)
{
return TUSB_ERROR_NONE;
}
static inline void hidh_mouse_close(uint8_t dev_addr) ATTR_ALWAYS_INLINE;
static inline void hidh_mouse_close(uint8_t dev_addr)
{
}
#endif
//--------------------------------------------------------------------+
// CLASS-USBD API (don't require to verify parameters)
//--------------------------------------------------------------------+
@ -133,7 +154,7 @@ void hidh_init(void)
#endif
#if TUSB_CFG_HOST_HID_MOUSE
hidh_mouse_init();
// hidh_mouse_init();
#endif
#if TUSB_CFG_HOST_HID_GENERIC
@ -169,7 +190,7 @@ tusb_error_t hidh_open_subtask(uint8_t dev_addr, tusb_descriptor_interface_t con
#if TUSB_CFG_HOST_HID_MOUSE
case HID_PROTOCOL_MOUSE:
ASSERT_STATUS ( hidh_keyboard_open(dev_addr, p_desc, p_length) );
ASSERT_STATUS ( hidh_mouse_open(dev_addr, (tusb_descriptor_endpoint_t const *) p_desc) );
break;
#endif

View File

@ -135,11 +135,12 @@ void hcd_port_reset(uint8_t hostid)
// NXP specific, port reset will automatically be 0 when reset sequence complete
// there is chance device is unplugged while reset sequence is not complete
while( regs->portsc_bit.port_reset) {}
#endif
// TODO finalize delay after reset, hack delay 100 ms, otherwise speed is detected as LOW in most cases
volatile uint32_t delay_us = 100000;
delay_us *= (SystemCoreClock / 1000000) / 3;
while(delay_us--);
#endif
}
bool hcd_port_connect_status(uint8_t hostid)