kingkevin
/
passkey_fw
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

group stm32f1 board

This commit is contained in:
hathach 2021-08-19 18:02:16 +07:00
parent c4a9a04d67
commit 1992f49343
7 changed files with 128 additions and 72 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
hw/bsp/stm32f0/family.c
View File

@ -55,12 +55,13 @@ void board_init(void)
// Enable UART Clock
UART_CLK_EN();
#if CFG_TUSB_OS == OPT_OS_NONE
// 1ms tick timer
SysTick_Config(SystemCoreClock / 1000);
#if CFG_TUSB_OS == OPT_OS_FREERTOS
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
NVIC_SetPriority(USB_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
#endif
// LED

0
hw/bsp/stm32f103bluepill/STM32F103XB_FLASH.ld → hw/bsp/stm32f1/boards/stm32f103bluepill/STM32F103XB_FLASH.ld
View File

92
hw/bsp/stm32f1/boards/stm32f103bluepill/board.h Normal file
View File

@ -0,0 +1,92 @@
/*
* The MIT License (MIT)
*
* Copyright (c) 2020, Ha Thach (tinyusb.org)
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*
* This file is part of the TinyUSB stack.
*/
#ifndef BOARD_H_
#define BOARD_H_
#ifdef __cplusplus
extern "C" {
#endif
// LED
#define LED_PORT GPIOC
#define LED_PIN GPIO_PIN_13
#define LED_STATE_ON 0
// Button
#define BUTTON_PORT GPIOA
#define BUTTON_PIN GPIO_PIN_0
#define BUTTON_STATE_ACTIVE 1
// UART
//#define UART_DEV USART1
//#define UART_CLK_EN __HAL_RCC_USART1_CLK_ENABLE
//#define UART_GPIO_PORT GPIOA
//#define UART_GPIO_AF GPIO_AF1_USART1
//#define UART_TX_PIN GPIO_PIN_9
//#define UART_RX_PIN GPIO_PIN_10
//--------------------------------------------------------------------+
// RCC Clock
//--------------------------------------------------------------------+
static inline void board_stm32f1_clock_init(void)
{
RCC_ClkInitTypeDef clkinitstruct = {0};
RCC_OscInitTypeDef oscinitstruct = {0};
RCC_PeriphCLKInitTypeDef rccperiphclkinit = {0};
/* Enable HSE Oscillator and activate PLL with HSE as source */
oscinitstruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
oscinitstruct.HSEState = RCC_HSE_ON;
oscinitstruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
oscinitstruct.PLL.PLLMUL = RCC_PLL_MUL9;
oscinitstruct.PLL.PLLState = RCC_PLL_ON;
oscinitstruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
HAL_RCC_OscConfig(&oscinitstruct);
/* USB clock selection */
rccperiphclkinit.PeriphClockSelection = RCC_PERIPHCLK_USB;
rccperiphclkinit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5;
HAL_RCCEx_PeriphCLKConfig(&rccperiphclkinit);
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
clkinitstruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
clkinitstruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
clkinitstruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
clkinitstruct.APB1CLKDivider = RCC_HCLK_DIV2;
clkinitstruct.APB2CLKDivider = RCC_HCLK_DIV1;
HAL_RCC_ClockConfig(&clkinitstruct, FLASH_LATENCY_2);
}
static inline void board_vbus_sense_init(void)
{
}
#ifdef __cplusplus
}
#endif
#endif /* BOARD_H_ */

11
hw/bsp/stm32f1/boards/stm32f103bluepill/board.mk Normal file
View File

@ -0,0 +1,11 @@
CFLAGS += -DSTM32F103xB -DHSE_VALUE=8000000U
# All source paths should be relative to the top level.
LD_FILE = $(BOARD_PATH)/STM32F103XB_FLASH.ld
SRC_S += $(ST_CMSIS)/Source/Templates/gcc/startup_stm32f103xb.s
# For flash-jlink target
JLINK_DEVICE = stm32f103c8
# flash target ROM bootloader
flash: flash-dfu-util

78
hw/bsp/stm32f103bluepill/stm32f103bluepill.c → hw/bsp/stm32f1/family.c
View File

@ -24,8 +24,9 @@
* This file is part of the TinyUSB stack.
*/
#include "../board.h"
#include "stm32f1xx_hal.h"
#include "bsp/board.h"
#include "board.h"
//--------------------------------------------------------------------+
// Forward USB interrupt events to TinyUSB IRQ Handler
@ -48,72 +49,29 @@ void USBWakeUp_IRQHandler(void)
//--------------------------------------------------------------------+
// MACRO TYPEDEF CONSTANT ENUM
//--------------------------------------------------------------------+
#define LED_PORT GPIOC
#define LED_PIN GPIO_PIN_13
#define LED_STATE_ON 0
#define BUTTON_PORT GPIOA
#define BUTTON_PIN GPIO_PIN_0
#define BUTTON_STATE_ACTIVE 1
/**
* @brief System Clock Configuration
* The system Clock is configured as follow :
* System Clock source = PLL (HSE)
* SYSCLK(Hz) = 72000000
* HCLK(Hz) = 72000000
* AHB Prescaler = 1
* APB1 Prescaler = 2
* APB2 Prescaler = 1
* HSE Frequency(Hz) = 8000000
* HSE PREDIV1 = 1
* PLLMUL = 9
* Flash Latency(WS) = 2
* @param None
* @retval None
*/
void SystemClock_Config(void)
{
RCC_ClkInitTypeDef clkinitstruct = {0};
RCC_OscInitTypeDef oscinitstruct = {0};
RCC_PeriphCLKInitTypeDef rccperiphclkinit = {0};
/* Enable HSE Oscillator and activate PLL with HSE as source */
oscinitstruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
oscinitstruct.HSEState = RCC_HSE_ON;
oscinitstruct.HSEPredivValue = RCC_HSE_PREDIV_DIV1;
oscinitstruct.PLL.PLLMUL = RCC_PLL_MUL9;
oscinitstruct.PLL.PLLState = RCC_PLL_ON;
oscinitstruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
HAL_RCC_OscConfig(&oscinitstruct);
/* USB clock selection */
rccperiphclkinit.PeriphClockSelection = RCC_PERIPHCLK_USB;
rccperiphclkinit.UsbClockSelection = RCC_USBCLKSOURCE_PLL_DIV1_5;
HAL_RCCEx_PeriphCLKConfig(&rccperiphclkinit);
/* Select PLL as system clock source and configure the HCLK, PCLK1 and PCLK2 clocks dividers */
clkinitstruct.ClockType = (RCC_CLOCKTYPE_SYSCLK | RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2);
clkinitstruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
clkinitstruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
clkinitstruct.APB1CLKDivider = RCC_HCLK_DIV2;
clkinitstruct.APB2CLKDivider = RCC_HCLK_DIV1;
HAL_RCC_ClockConfig(&clkinitstruct, FLASH_LATENCY_2);
}
void board_init(void)
{
SystemClock_Config();
board_stm32f1_clock_init();
#if CFG_TUSB_OS == OPT_OS_NONE
// Enable All GPIOs clocks
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
#if CFG_TUSB_OS == OPT_OS_NONE
// 1ms tick timer
SysTick_Config(SystemCoreClock / 1000);
#endif
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
NVIC_SetPriority(USB_HP_CAN1_TX_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
NVIC_SetPriority(USB_LP_CAN1_RX0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
NVIC_SetPriority(USBWakeUp_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
#endif
// LED
__HAL_RCC_GPIOC_CLK_ENABLE();
GPIO_InitTypeDef GPIO_InitStruct;
GPIO_InitStruct.Pin = LED_PIN;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
@ -122,7 +80,6 @@ void board_init(void)
HAL_GPIO_Init(LED_PORT, &GPIO_InitStruct);
// Button
__HAL_RCC_GPIOA_CLK_ENABLE();
GPIO_InitStruct.Pin = BUTTON_PIN;
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_PULLDOWN;
@ -131,7 +88,6 @@ void board_init(void)
// USB Pins
// Configure USB DM and DP pins.
__HAL_RCC_GPIOA_CLK_ENABLE();
GPIO_InitStruct.Pin = (GPIO_PIN_11 | GPIO_PIN_12);
GPIO_InitStruct.Mode = GPIO_MODE_INPUT;
GPIO_InitStruct.Pull = GPIO_NOPULL;

14
hw/bsp/stm32f103bluepill/board.mk → hw/bsp/stm32f1/family.mk
View File

@ -4,6 +4,8 @@ DEPS_SUBMODULES += lib/CMSIS_5 hw/mcu/st/cmsis_device_$(ST_FAMILY) hw/mcu/st/stm
ST_CMSIS = hw/mcu/st/cmsis_device_$(ST_FAMILY)
ST_HAL_DRIVER = hw/mcu/st/stm32$(ST_FAMILY)xx_hal_driver
include $(TOP)/$(BOARD_PATH)/board.mk
CFLAGS += \
-flto \
-mthumb \
@ -11,15 +13,12 @@ CFLAGS += \
-mcpu=cortex-m3 \
-mfloat-abi=soft \
-nostdlib -nostartfiles \
-DSTM32F103xB \
-DCFG_TUSB_MCU=OPT_MCU_STM32F1
# mcu driver cause following warnings
#CFLAGS += -Wno-error=unused-parameter
# All source paths should be relative to the top level.
LD_FILE = hw/bsp/$(BOARD)/STM32F103XB_FLASH.ld
SRC_C += \
src/portable/st/stm32_fsdev/dcd_stm32_fsdev.c \
$(ST_CMSIS)/Source/Templates/system_stm32$(ST_FAMILY)xx.c \
@ -29,14 +28,11 @@ SRC_C += \
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_rcc_ex.c \
$(ST_HAL_DRIVER)/Src/stm32$(ST_FAMILY)xx_hal_gpio.c
SRC_S += \
$(ST_CMSIS)/Source/Templates/gcc/startup_stm32f103xb.s
INC += \
$(TOP)/$(BOARD_PATH) \
$(TOP)/lib/CMSIS_5/CMSIS/Core/Include \
$(TOP)/$(ST_CMSIS)/Include \
$(TOP)/$(ST_HAL_DRIVER)/Inc \
$(TOP)/hw/bsp/$(BOARD)
$(TOP)/$(ST_HAL_DRIVER)/Inc
# For freeRTOS port source
FREERTOS_PORT = ARM_CM3
@ -45,5 +41,5 @@ FREERTOS_PORT = ARM_CM3
JLINK_DEVICE = stm32f103c8
# flash target ROM bootloader
flash: $(BUILD)/$(PROJECT).bin
flash-dfu-util: $(BUILD)/$(PROJECT).bin
dfu-util -R -a 0 --dfuse-address 0x08000000 -D $<

0
hw/bsp/stm32f103bluepill/stm32f1xx_hal_conf.h → hw/bsp/stm32f1/stm32f1xx_hal_conf.h
View File