2023-03-17 10:12:49 +01:00
|
|
|
/*
|
2019-09-09 11:47:57 +02:00
|
|
|
* The MIT License (MIT)
|
|
|
|
*
|
|
|
|
* Copyright (c) 2019 Ha Thach (tinyusb.org)
|
|
|
|
*
|
|
|
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
|
|
|
* of this software and associated documentation files (the "Software"), to deal
|
|
|
|
* in the Software without restriction, including without limitation the rights
|
|
|
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
|
|
|
* copies of the Software, and to permit persons to whom the Software is
|
|
|
|
* furnished to do so, subject to the following conditions:
|
|
|
|
*
|
|
|
|
* The above copyright notice and this permission notice shall be included in
|
|
|
|
* all copies or substantial portions of the Software.
|
|
|
|
*
|
|
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
|
|
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
|
|
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
|
|
|
* THE SOFTWARE.
|
|
|
|
*
|
|
|
|
* This file is part of the TinyUSB stack.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include "chip.h"
|
|
|
|
#include "../board.h"
|
|
|
|
|
|
|
|
#define LED_PORT 1
|
|
|
|
#define LED_PIN 12
|
|
|
|
#define LED_STATE_ON 0
|
|
|
|
|
|
|
|
#define BUTTON_PORT 0
|
|
|
|
#define BUTTON_PIN 7
|
|
|
|
#define BUTTON_STATE_ACTIVE 0
|
|
|
|
|
|
|
|
#define BOARD_UART_PORT LPC_USART0
|
|
|
|
#define BOARD_UART_PIN_PORT 0x0f
|
|
|
|
#define BOARD_UART_PIN_TX 10 // PF.10 : UART0_TXD
|
|
|
|
#define BOARD_UART_PIN_RX 11 // PF.11 : UART0_RXD
|
|
|
|
|
2022-06-06 07:51:10 +02:00
|
|
|
#ifdef BOARD_TUD_RHPORT
|
|
|
|
#define PORT_SUPPORT_DEVICE(_n) (BOARD_TUD_RHPORT == _n)
|
|
|
|
#else
|
|
|
|
#define PORT_SUPPORT_DEVICE(_n) 0
|
|
|
|
#endif
|
|
|
|
|
|
|
|
#ifdef BOARD_TUH_RHPORT
|
|
|
|
#define PORT_SUPPORT_HOST(_n) (BOARD_TUH_RHPORT == _n)
|
|
|
|
#else
|
|
|
|
#define PORT_SUPPORT_HOST(_n) 0
|
|
|
|
#endif
|
|
|
|
|
2019-09-09 11:47:57 +02:00
|
|
|
/*------------------------------------------------------------------*/
|
|
|
|
/* BOARD API
|
|
|
|
*------------------------------------------------------------------*/
|
|
|
|
|
|
|
|
/* System configuration variables used by chip driver */
|
|
|
|
const uint32_t OscRateIn = 12000000;
|
|
|
|
const uint32_t ExtRateIn = 0;
|
|
|
|
|
|
|
|
static const PINMUX_GRP_T pinmuxing[] =
|
|
|
|
{
|
|
|
|
// LED P2.12 as GPIO 1.12
|
|
|
|
{2, 11, (SCU_MODE_INBUFF_EN | SCU_MODE_PULLDOWN | SCU_MODE_FUNC0)},
|
|
|
|
|
|
|
|
// Button P2.7 as GPIO 0.7
|
|
|
|
{2, 7, (SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC0)},
|
|
|
|
|
|
|
|
// USB
|
2019-09-09 12:00:35 +02:00
|
|
|
{2, 6, (SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC4)}, // USB1_PWR_EN
|
|
|
|
{2, 5, (SCU_MODE_INACT | SCU_MODE_INBUFF_EN | SCU_MODE_ZIF_DIS | SCU_MODE_FUNC2)}, // USB1_VBUS
|
|
|
|
{1, 7, (SCU_MODE_PULLUP | SCU_MODE_INBUFF_EN | SCU_MODE_FUNC4)}, // USB0_PWRN_EN
|
2019-09-09 11:47:57 +02:00
|
|
|
|
|
|
|
// SPIFI
|
|
|
|
{3, 3, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI CLK */
|
|
|
|
{3, 4, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D3 */
|
|
|
|
{3, 5, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D2 */
|
|
|
|
{3, 6, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D1 */
|
|
|
|
{3, 7, (SCU_PINIO_FAST | SCU_MODE_FUNC3)}, /* SPIFI D0 */
|
|
|
|
{3, 8, (SCU_PINIO_FAST | SCU_MODE_FUNC3)} /* SPIFI CS/SSEL */
|
|
|
|
};
|
|
|
|
|
|
|
|
// Invoked by startup code
|
|
|
|
void SystemInit(void)
|
|
|
|
{
|
2020-09-03 07:58:09 +02:00
|
|
|
#ifdef __USE_LPCOPEN
|
|
|
|
extern void (* const g_pfnVectors[])(void);
|
|
|
|
unsigned int *pSCB_VTOR = (unsigned int *) 0xE000ED08;
|
2020-09-03 18:48:56 +02:00
|
|
|
*pSCB_VTOR = (unsigned int) g_pfnVectors;
|
2020-09-03 07:58:09 +02:00
|
|
|
|
|
|
|
#if __FPU_USED == 1
|
|
|
|
fpuInit();
|
|
|
|
#endif
|
|
|
|
#endif // __USE_LPCOPEN
|
2019-09-09 11:47:57 +02:00
|
|
|
|
|
|
|
// Set up pinmux
|
|
|
|
Chip_SCU_SetPinMuxing(pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T));
|
|
|
|
|
|
|
|
//------------- Set up clock -------------//
|
|
|
|
Chip_Clock_SetBaseClock(CLK_BASE_SPIFI, CLKIN_IRC, true, false); // change SPIFI to IRC during clock programming
|
|
|
|
LPC_SPIFI->CTRL |= SPIFI_CTRL_FBCLK(1); // and set FBCLK in SPIFI controller
|
|
|
|
|
|
|
|
Chip_SetupCoreClock(CLKIN_CRYSTAL, MAX_CLOCK_FREQ, true);
|
|
|
|
|
|
|
|
/* Reset and enable 32Khz oscillator */
|
|
|
|
LPC_CREG->CREG0 &= ~((1 << 3) | (1 << 2));
|
|
|
|
LPC_CREG->CREG0 |= (1 << 1) | (1 << 0);
|
|
|
|
|
|
|
|
/* Setup a divider E for main PLL clock switch SPIFI clock to that divider.
|
|
|
|
Divide rate is based on CPU speed and speed of SPI FLASH part. */
|
|
|
|
#if (MAX_CLOCK_FREQ > 180000000)
|
|
|
|
Chip_Clock_SetDivider(CLK_IDIV_E, CLKIN_MAINPLL, 5);
|
|
|
|
#else
|
|
|
|
Chip_Clock_SetDivider(CLK_IDIV_E, CLKIN_MAINPLL, 4);
|
|
|
|
#endif
|
|
|
|
Chip_Clock_SetBaseClock(CLK_BASE_SPIFI, CLKIN_IDIVE, true, false);
|
|
|
|
|
|
|
|
/* Setup system base clocks and initial states. This won't enable and
|
|
|
|
disable individual clocks, but sets up the base clock sources for
|
|
|
|
each individual peripheral clock. */
|
|
|
|
Chip_Clock_SetBaseClock(CLK_BASE_USB1, CLKIN_IDIVD, true, true);
|
|
|
|
}
|
|
|
|
|
|
|
|
void board_init(void)
|
|
|
|
{
|
|
|
|
SystemCoreClockUpdate();
|
|
|
|
|
|
|
|
#if CFG_TUSB_OS == OPT_OS_NONE
|
|
|
|
// 1ms tick timer
|
|
|
|
SysTick_Config(SystemCoreClock / 1000);
|
|
|
|
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
|
|
|
|
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
|
2022-06-06 07:51:10 +02:00
|
|
|
NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY);
|
2019-09-09 11:47:57 +02:00
|
|
|
#endif
|
|
|
|
|
|
|
|
Chip_GPIO_Init(LPC_GPIO_PORT);
|
|
|
|
|
|
|
|
// LED
|
|
|
|
Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, LED_PORT, LED_PIN);
|
|
|
|
|
|
|
|
// Button
|
|
|
|
Chip_GPIO_SetPinDIRInput(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN);
|
|
|
|
|
|
|
|
#if 0
|
|
|
|
//------------- UART -------------//
|
|
|
|
scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_TX, MD_PDN, FUNC1);
|
|
|
|
scu_pinmux(BOARD_UART_PIN_PORT, BOARD_UART_PIN_RX, MD_PLN | MD_EZI | MD_ZI, FUNC1);
|
|
|
|
|
|
|
|
UART_CFG_Type UARTConfigStruct;
|
|
|
|
UART_ConfigStructInit(&UARTConfigStruct);
|
2019-10-11 19:00:08 +02:00
|
|
|
UARTConfigStruct.Baud_rate = CFG_BOARD_UART_BAUDRATE;
|
2019-09-09 11:47:57 +02:00
|
|
|
UARTConfigStruct.Clock_Speed = 0;
|
|
|
|
|
|
|
|
UART_Init(BOARD_UART_PORT, &UARTConfigStruct);
|
|
|
|
UART_TxCmd(BOARD_UART_PORT, ENABLE); // Enable UART Transmit
|
|
|
|
#endif
|
|
|
|
|
|
|
|
//------------- USB -------------//
|
|
|
|
enum {
|
|
|
|
USBMODE_DEVICE = 2,
|
|
|
|
USBMODE_HOST = 3
|
|
|
|
};
|
|
|
|
|
|
|
|
enum {
|
|
|
|
USBMODE_VBUS_LOW = 0,
|
|
|
|
USBMODE_VBUS_HIGH = 1
|
|
|
|
};
|
|
|
|
|
|
|
|
/* USB0
|
|
|
|
* For USB Device operation; insert jumpers in position 1-2 in JP17/JP18/JP19. GPIO28 controls USB
|
|
|
|
* connect functionality and LED32 lights when the USB Device is connected. SJ4 has pads 1-2 shorted
|
|
|
|
* by default. LED33 is controlled by GPIO27 and signals USB-up state. GPIO54 is used for VBUS
|
|
|
|
* sensing.
|
|
|
|
* For USB Host operation; insert jumpers in position 2-3 in JP17/JP18/JP19. USB Host power is
|
|
|
|
* controlled via distribution switch U20 (found in schematic page 11). Signal GPIO26 is active low and
|
|
|
|
* enables +5V on VBUS2. LED35 light whenever +5V is present on VBUS2. GPIO55 is connected to
|
|
|
|
* status feedback from the distribution switch. GPIO54 is used for VBUS sensing. 15Kohm pull-down
|
|
|
|
* resistors are always active
|
|
|
|
*/
|
|
|
|
Chip_USB0_Init();
|
|
|
|
|
|
|
|
/* USB1
|
|
|
|
* When USB channel #1 is used as USB Host, 15Kohm pull-down resistors are needed on the USB data
|
|
|
|
* signals. These are activated inside the USB OTG chip (U31), and this has to be done via the I2C
|
|
|
|
* interface of GPIO52/GPIO53.
|
|
|
|
* J20 is the connector to use when USB Host is used. In order to provide +5V to the external USB
|
|
|
|
* device connected to this connector (J20), channel A of U20 must be enabled. It is enabled by default
|
|
|
|
* since SJ5 is normally connected between pin 1-2. LED34 lights green when +5V is available on J20.
|
|
|
|
* JP15 shall not be inserted. JP16 has no effect
|
|
|
|
*
|
|
|
|
* When USB channel #1 is used as USB Device, a 1.5Kohm pull-up resistor is needed on the USB DP
|
|
|
|
* data signal. There are two methods to create this. JP15 is inserted and the pull-up resistor is always
|
|
|
|
* enabled. Alternatively, the pull-up resistor is activated inside the USB OTG chip (U31), and this has to
|
|
|
|
* be done via the I2C interface of GPIO52/GPIO53. In the latter case, JP15 shall not be inserted.
|
|
|
|
* J19 is the connector to use when USB Device is used. Normally it should be a USB-B connector for
|
|
|
|
* creating a USB Device interface, but the mini-AB connector can also be used in this case. The status
|
|
|
|
* of VBUS can be read via U31.
|
|
|
|
* JP16 shall not be inserted.
|
|
|
|
*/
|
|
|
|
Chip_USB1_Init();
|
2019-09-09 12:00:35 +02:00
|
|
|
// Chip_GPIO_SetPinDIROutput(LPC_GPIO_PORT, 5, 6); /* GPIO5[6] = USB1_PWR_EN */
|
|
|
|
// Chip_GPIO_SetPinState(LPC_GPIO_PORT, 5, 6, true); /* GPIO5[6] output high */
|
2019-09-09 11:47:57 +02:00
|
|
|
}
|
|
|
|
|
2019-11-21 16:20:30 +01:00
|
|
|
//--------------------------------------------------------------------+
|
|
|
|
// USB Interrupt Handler
|
|
|
|
//--------------------------------------------------------------------+
|
|
|
|
void USB0_IRQHandler(void)
|
|
|
|
{
|
2022-06-06 07:51:10 +02:00
|
|
|
#if PORT_SUPPORT_DEVICE(0)
|
|
|
|
tud_int_handler(0);
|
2019-11-21 16:20:30 +01:00
|
|
|
#endif
|
|
|
|
|
2022-06-06 07:51:10 +02:00
|
|
|
#if PORT_SUPPORT_HOST(0)
|
|
|
|
tuh_int_handler(0);
|
2019-11-21 16:20:30 +01:00
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
|
|
void USB1_IRQHandler(void)
|
|
|
|
{
|
2022-06-06 07:51:10 +02:00
|
|
|
#if PORT_SUPPORT_DEVICE(1)
|
|
|
|
tud_int_handler(1);
|
2019-11-21 16:20:30 +01:00
|
|
|
#endif
|
|
|
|
|
2022-06-06 07:51:10 +02:00
|
|
|
#if PORT_SUPPORT_HOST(1)
|
|
|
|
tuh_int_handler(1);
|
2019-11-21 16:20:30 +01:00
|
|
|
#endif
|
|
|
|
}
|
|
|
|
|
2019-09-09 11:47:57 +02:00
|
|
|
//--------------------------------------------------------------------+
|
|
|
|
// Board porting API
|
|
|
|
//--------------------------------------------------------------------+
|
|
|
|
|
|
|
|
void board_led_write(bool state)
|
|
|
|
{
|
|
|
|
Chip_GPIO_SetPinState(LPC_GPIO_PORT, LED_PORT, LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
|
|
|
|
}
|
|
|
|
|
|
|
|
uint32_t board_button_read(void)
|
|
|
|
{
|
|
|
|
return BUTTON_STATE_ACTIVE == Chip_GPIO_GetPinState(LPC_GPIO_PORT, BUTTON_PORT, BUTTON_PIN);
|
|
|
|
}
|
|
|
|
|
|
|
|
int board_uart_read(uint8_t* buf, int len)
|
|
|
|
{
|
|
|
|
//return UART_ReceiveByte(BOARD_UART_PORT);
|
2019-10-24 07:20:06 +02:00
|
|
|
(void) buf; (void) len;
|
2019-09-09 11:47:57 +02:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
int board_uart_write(void const * buf, int len)
|
|
|
|
{
|
|
|
|
//UART_Send(BOARD_UART_PORT, &c, 1, BLOCKING);
|
2019-10-24 07:20:06 +02:00
|
|
|
(void) buf; (void) len;
|
2019-09-09 11:47:57 +02:00
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
#if CFG_TUSB_OS == OPT_OS_NONE
|
|
|
|
volatile uint32_t system_ticks = 0;
|
|
|
|
void SysTick_Handler (void)
|
|
|
|
{
|
|
|
|
system_ticks++;
|
|
|
|
}
|
|
|
|
|
|
|
|
uint32_t board_millis(void)
|
|
|
|
{
|
|
|
|
return system_ticks;
|
|
|
|
}
|
|
|
|
#endif
|