110 lines
4.1 KiB
C
110 lines
4.1 KiB
C
/* micro-controller firmware fot the Linear MDR receiver
|
|
Copyright (C) 2014 Kévin Redon <kingkevin@cuvoodoo.info>
|
|
|
|
This program is free software; you can redistribute it and/or modify
|
|
it under the terms of the GNU General Public License as published by
|
|
the Free Software Foundation; either version 3 of the License, or
|
|
(at your option) any later version.
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
GNU General Public License for more details.
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
along with this program; if not, write to the Free Software Foundation,
|
|
Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
/* libraries */
|
|
#define __16f1847
|
|
#include <pic16f1847.h>
|
|
#include <stdint.h>
|
|
|
|
/* the peripherals connected to the pins */
|
|
#define RELAY1 _RA2 /* pin 1 */
|
|
#define RELAY2 _RA3 /* pin 2 */
|
|
/* pin 3 is connected to ground */
|
|
/* pin 4 is used as master clear */
|
|
/* pin 5 is Vss (ground) */
|
|
#define SWITCH1 _RB0 /* pin 6 (on ground when pressed) */
|
|
#define LED _RB1 /* pin 7 (used as sink) */
|
|
#define SWITCH2 _RB2 /* pin 8 (on ground when pressed) */
|
|
/* pin 9 is for a secret function, set by jumper WJ1, Vdd per default */
|
|
/* pin 10 is not connected */
|
|
/* pin 11 in not connected */
|
|
#define MEMORY_CLK _RB6 /* pin 12, external 24LC256 EEPROM */
|
|
#define MEMORY_DATA _RB7 /* pin 13, external 24LC256 EEPROM */
|
|
/* pin 14 is Vdd (5V) */
|
|
/* pin 15 is clonnected to external 4MHz ceramic resonator */
|
|
/* pin 16 is clonnected to external 4MHz ceramic resonator */
|
|
#define RADIO _RA0 /* radio signal receiver, filtered by LM358N */
|
|
/* pin 18 is for a secret function, set by jumper WJ2, Vdd per default */
|
|
|
|
/* simple functions */
|
|
#define led_off() PORTB |= LED
|
|
#define led_on() PORTB &= ~(LED)
|
|
#define sleep() __asm sleep __endasm
|
|
|
|
/* variables */
|
|
|
|
/* configuration bits */
|
|
uint16_t __at(_CONFIG1) __CONFIG1 = _FCMEN_ON & /* enable fail-safe clock monitor */
|
|
_IESO_ON & /* enable internal/external switchover (since fail-safe is enabled) */
|
|
_CLKOUTEN_ON & /* use CLKOUT for extrenal resonator (but it is ignored) */
|
|
_BOREN_NSLEEP & /* only use brown out during normal operation (not sleep) */
|
|
_CPD_OFF & /* no data memory code protection */
|
|
_CP_OFF & /* no program memory code protection */
|
|
_MCLRE_ON& /* use master clear */
|
|
_PWRTE_ON & /* use power-up timer */
|
|
_WDTE_OFF & /* disable watchdog */
|
|
_FOSC_XT; /* use external resonator */
|
|
|
|
/* initialize micro-conroller */
|
|
void init (void) {
|
|
ANSELA = 0; /* all pins are digital */
|
|
ANSELB = 0; /* all pins are digital */
|
|
TRISA |= RADIO; /* radio signal is an input */
|
|
TRISA &= ~(RELAY1|RELAY2); /* relays are outputs */
|
|
TRISB |= SWITCH1|SWITCH2; /* switches are inputs (with external pull-ups) */
|
|
TRISB &= ~(LED|MEMORY_CLK|MEMORY_DATA); /* LED is I2C memory are outputs */
|
|
led_off(); /* starting state */
|
|
/*
|
|
IOC |= (SWITCH1|SWITCH2|SWITCH3|SWITCH4); // enable interrupt for the switches
|
|
GPIE = 1; // enable interrupt on GPIO
|
|
last_gpio = GPIO; // save current state
|
|
|
|
T1CON = _T1CKPS1 | _T1CKPS0; // set prescaler to 8
|
|
// 0 is set per default, but just be sure
|
|
TMR1ON = 0; // stop timer 1
|
|
TMR1GE = 0; // enable timer 1
|
|
TMR1CS = 0; // use internal clock / 4 (=1MHz)
|
|
TMR1IF = 0; // clear interrupt
|
|
PIE1 = 1; // enable timer 1 interrupt
|
|
PEIE = 1; // enable timer interrupt
|
|
|
|
GIE = 1; // enable interrups
|
|
*/
|
|
|
|
}
|
|
|
|
/* funcion called on interrupts */
|
|
/* interrupt 0 is only one on PIC16 */
|
|
static void interrupt(void) __interrupt 0
|
|
{
|
|
}
|
|
|
|
void main (void)
|
|
{
|
|
init(); /* configure micro-controller */
|
|
led_on();
|
|
while (1) { /* a microcontroller runs forever */
|
|
if (PORTB&SWITCH1) {
|
|
led_off();
|
|
} else {
|
|
led_on();
|
|
}
|
|
// sleep(); /* sleep to save power */
|
|
}
|
|
}
|
|
|