usb: Add USB host CDC-ACM class driver
This commit is contained in:
Tomas Rezucha
parent
a8920be672
commit
52b2f0b137
|
|
@ -0,0 +1,3 @@
|
|||
idf_component_register(SRCS "cdc_acm_host.c"
|
||||
INCLUDE_DIRS "include"
|
||||
REQUIRES usb)
|
||||
|
|
@ -0,0 +1,46 @@
|
|||
# USB Host CDC-ACM Class Driver
|
||||
|
||||
This directory contains an implementation of a USB CDC-ACM Host Class Driver that is implemented on top of the [USB Host Library](https://docs.espressif.com/projects/esp-idf/en/latest/esp32s2/api-reference/peripherals/usb_host.html).
|
||||
|
||||
## Supported Devices
|
||||
|
||||
The CDC-ACM Host driver supports the following types of CDC devices:
|
||||
|
||||
1. CDC-ACM devices
|
||||
2. CDC-like vendor specific devices (usually found on USB to UART bridge devices)
|
||||
|
||||
### CDC-ACM Devices
|
||||
|
||||
The CDC-ACM Class driver supports CDC-ACM devices that meet the following requirements:
|
||||
- The device class code must be set to the CDC class `0x02` or implement Interface Association Descriptor (IAD)
|
||||
- The CDC-ACM must contain the following interfaces:
|
||||
- A Communication Class Interface containing a management element (EP0) and may also contain a notification element (an interrupt endpoint). The driver will check this interface for CDC Functional Descriptors.
|
||||
- A Data Class Interface with two BULK endpoints (IN and OUT). Other transfer types are not supported by the driver
|
||||
|
||||
### CDC-Like Vendor Specific Devices
|
||||
|
||||
The CDC-ACM Class driver supports CDC-like devices that meet the following requirements:
|
||||
- The device class code must be set to the vendor specific class code `0xFF`
|
||||
- The device needs to provide and interface containing the following endpoints:
|
||||
- (Mandatory) Two Bulk endpoints (IN and OUT) for data
|
||||
- (Optional) An interrupt endpoint (IN) for the notification element
|
||||
|
||||
For CDC-like devices, users are responsible for ensuring that they only call APIs (e.g., `cdc_acm_host_send_break()`) that are supported by the target device.
|
||||
|
||||
|
||||
## Usage
|
||||
|
||||
The following steps outline the typical API call pattern of the CDC-ACM Class Driver
|
||||
|
||||
1. Install the USB Host Library via `usb_host_install()`
|
||||
2. Install the CDC-ACM driver via `cdc_acm_host_install()`
|
||||
3. Call `cdc_acm_host_open()`/`cdc_acm_host_open_vendor_specific()` to open a target CDC-ACM/CDC-like device. These functions will block until the target device is connected
|
||||
4. To transmit data, call `cdc_acm_host_data_tx_blocking()`
|
||||
5. When data is received, the driver will automatically run the receive data callback
|
||||
6. An opened device can be closed via `cdc_acm_host_close()`
|
||||
7. The CDC-ACM driver can be uninstalled via `cdc_acm_host_uninstall()`
|
||||
|
||||
## Examples
|
||||
|
||||
- For an example with a CDC-ACM device, refer to [cdc_acm_host](../../cdc_acm_host)
|
||||
- For an example with a CDC-like device, refer to [cdc_acm_host_bg96](../../cdc_acm_bg96)
|
||||
File diff suppressed because it is too large
Load Diff
|
|
@ -0,0 +1,305 @@
|
|||
/*
|
||||
* SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include <stdbool.h>
|
||||
#include "usb_types_cdc.h"
|
||||
#include "esp_err.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
typedef struct cdc_dev_s *cdc_acm_dev_hdl_t;
|
||||
|
||||
/**
|
||||
* @brief Line Coding structure
|
||||
* @see Table 17, USB CDC-PSTN specification rev. 1.2
|
||||
*/
|
||||
typedef struct {
|
||||
uint32_t dwDTERate; // in bits per second
|
||||
uint8_t bCharFormat; // 0: 1 stopbit, 1: 1.5 stopbits, 2: 2 stopbits
|
||||
uint8_t bParityType; // 0: None, 1: Odd, 2: Even, 3: Mark, 4: Space
|
||||
uint8_t bDataBits; // 5, 6, 7, 8 or 16
|
||||
} __attribute__((packed)) cdc_acm_line_coding_t;
|
||||
|
||||
/**
|
||||
* @brief UART State Bitmap
|
||||
* @see Table 31, USB CDC-PSTN specification rev. 1.2
|
||||
*/
|
||||
typedef union {
|
||||
struct {
|
||||
uint16_t bRxCarrier : 1; // State of receiver carrier detection mechanism of device. This signal corresponds to V.24 signal 109 and RS-232 signal DCD.
|
||||
uint16_t bTxCarrier : 1; // State of transmission carrier. This signal corresponds to V.24 signal 106 and RS-232 signal DSR.
|
||||
uint16_t bBreak : 1; // State of break detection mechanism of the device.
|
||||
uint16_t bRingSignal : 1; // State of ring signal detection of the device.
|
||||
uint16_t bFraming : 1; // A framing error has occurred.
|
||||
uint16_t bParity : 1; // A parity error has occurred.
|
||||
uint16_t bOverRun : 1; // Received data has been discarded due to overrun in the device.
|
||||
uint16_t reserved : 9;
|
||||
};
|
||||
uint16_t val;
|
||||
} cdc_acm_uart_state_t;
|
||||
|
||||
/**
|
||||
* @brief CDC-ACM Device Event types to upper layer
|
||||
*
|
||||
*/
|
||||
typedef enum {
|
||||
CDC_ACM_HOST_ERROR,
|
||||
CDC_ACM_HOST_SERIAL_STATE,
|
||||
CDC_ACM_HOST_NETWORK_CONNECTION,
|
||||
CDC_ACM_HOST_DEVICE_DISCONNECTED
|
||||
} cdc_acm_host_dev_event_t;
|
||||
|
||||
/**
|
||||
* @brief CDC-ACM Device Event data structure
|
||||
*
|
||||
*/
|
||||
typedef struct {
|
||||
cdc_acm_host_dev_event_t type;
|
||||
union {
|
||||
int error; // Error code from USB Host
|
||||
cdc_acm_uart_state_t serial_state; // Serial (UART) state
|
||||
bool network_connected; // Network connection event
|
||||
} data;
|
||||
} cdc_acm_host_dev_event_data_t;
|
||||
|
||||
/**
|
||||
* @brief Data receive callback type
|
||||
*/
|
||||
typedef void (*cdc_acm_data_callback_t)(uint8_t* data, size_t data_len, void *user_arg);
|
||||
|
||||
/**
|
||||
* @brief Device event callback type
|
||||
* @see cdc_acm_host_dev_event_t
|
||||
*/
|
||||
typedef void (*cdc_acm_host_dev_callback_t)(cdc_acm_dev_hdl_t cdc_hdl, const cdc_acm_host_dev_event_data_t *event, void *user_ctx);
|
||||
|
||||
/**
|
||||
* @brief Configuration structure of USB Host CDC-ACM driver
|
||||
*
|
||||
*/
|
||||
typedef struct {
|
||||
size_t driver_task_stack_size; /**< Stack size of the driver's task */
|
||||
unsigned driver_task_priority; /**< Priority of the driver's task */
|
||||
int xCoreID; /**< Core affinity of the driver's task */
|
||||
} cdc_acm_host_driver_config_t;
|
||||
|
||||
/**
|
||||
* @brief Configuration structure of CDC-ACM device
|
||||
*
|
||||
*/
|
||||
typedef struct {
|
||||
uint32_t connection_timeout_ms; /**< Timeout for USB device connection in [ms] */
|
||||
size_t out_buffer_size; /**< Maximum size of USB bulk out transfer, set to 0 for read-only devices */
|
||||
cdc_acm_host_dev_callback_t event_cb; /**< Device's event callback function. Can be NULL */
|
||||
cdc_acm_data_callback_t data_cb; /**< Device's data RX callback function. Can be NULL for write-only devices */
|
||||
void *user_arg; /**< User's argument that will be passed to the callbacks */
|
||||
} cdc_acm_host_device_config_t;
|
||||
|
||||
/**
|
||||
* @brief Install CDC-ACM driver
|
||||
*
|
||||
* - USB Host Library must already be installed before calling this function (via usb_host_install())
|
||||
* - This function should be called before calling any other CDC driver functions
|
||||
*
|
||||
* @param[in] driver_config Driver configuration structure. If set to NULL, a default configuration will be used.
|
||||
* @return esp_err_t
|
||||
*/
|
||||
esp_err_t cdc_acm_host_install(const cdc_acm_host_driver_config_t *driver_config);
|
||||
|
||||
/**
|
||||
* @brief Uninstall CDC-ACM driver
|
||||
*
|
||||
* - Users must ensure that all CDC devices must be closed via cdc_acm_host_close() before calling this function
|
||||
*
|
||||
* @return esp_err_t
|
||||
*/
|
||||
esp_err_t cdc_acm_host_uninstall(void);
|
||||
|
||||
/**
|
||||
* @brief Open CDC-ACM compliant device
|
||||
*
|
||||
* CDC-ACM compliant device must contain either an Interface Association Descriptor or CDC-Union descriptor,
|
||||
* which are used for the driver's configuration.
|
||||
*
|
||||
* @param[in] vid Device's Vendor ID
|
||||
* @param[in] pid Device's Product ID
|
||||
* @param[in] interface_idx Index of device's interface used for CDC-ACM communication
|
||||
* @param[in] dev_config Configuration structure of the device
|
||||
* @param[out] cdc_hdl_ret CDC device handle
|
||||
* @return esp_err_t
|
||||
*/
|
||||
esp_err_t cdc_acm_host_open(uint16_t vid, uint16_t pid, uint8_t interface_idx, const cdc_acm_host_device_config_t *dev_config, cdc_acm_dev_hdl_t *cdc_hdl_ret);
|
||||
|
||||
/**
|
||||
* @brief Open CDC-ACM non-compliant device
|
||||
*
|
||||
* CDC-ACM non-compliant device acts as CDC-ACM device but doesn't support all its features.
|
||||
* User must provide the interface index that will be used (zero for non-composite devices).
|
||||
*
|
||||
* @param[in] vid Device's Vendor ID
|
||||
* @param[in] pid Device's Product ID
|
||||
* @param[in] interface_idx Index of device's interface used for CDC-ACM like communication
|
||||
* @param[in] dev_config Configuration structure of the device
|
||||
* @param[out] cdc_hdl_ret CDC device handle
|
||||
* @return esp_err_t
|
||||
*/
|
||||
esp_err_t cdc_acm_host_open_vendor_specific(uint16_t vid, uint16_t pid, uint8_t interface_num, const cdc_acm_host_device_config_t *dev_config, cdc_acm_dev_hdl_t *cdc_hdl_ret);
|
||||
|
||||
/**
|
||||
* @brief Close CDC device and release its resources
|
||||
*
|
||||
* @note All in-flight transfers will be prematurely canceled.
|
||||
* @param cdc_hdl CDC handle obtained from cdc_acm_host_open()
|
||||
* @return esp_err_t
|
||||
*/
|
||||
esp_err_t cdc_acm_host_close(cdc_acm_dev_hdl_t cdc_hdl);
|
||||
|
||||
/**
|
||||
* @brief Transmit data - blocking mode
|
||||
*
|
||||
* @param cdc_hdl CDC handle obtained from cdc_acm_host_open()
|
||||
* @param[in] data Data to be sent
|
||||
* @param[in] data_len Data length
|
||||
* @param[in] timeout_ms Timeout in [ms]
|
||||
* @return esp_err_t
|
||||
*/
|
||||
esp_err_t cdc_acm_host_data_tx_blocking(cdc_acm_dev_hdl_t cdc_hdl, const uint8_t *data, size_t data_len, uint32_t timeout_ms);
|
||||
|
||||
/**
|
||||
* @brief SetLineCoding function
|
||||
*
|
||||
* @see Chapter 6.3.10, USB CDC-PSTN specification rev. 1.2
|
||||
*
|
||||
* @param cdc_hdl CDC handle obtained from cdc_acm_host_open()
|
||||
* @param[in] line_coding Line Coding structure
|
||||
* @return esp_err_t
|
||||
*/
|
||||
esp_err_t cdc_acm_host_line_coding_set(cdc_acm_dev_hdl_t cdc_hdl, const cdc_acm_line_coding_t *line_coding);
|
||||
|
||||
/**
|
||||
* @brief GetLineCoding function
|
||||
*
|
||||
* @see Chapter 6.3.11, USB CDC-PSTN specification rev. 1.2
|
||||
*
|
||||
* @param cdc_hdl CDC handle obtained from cdc_acm_host_open()
|
||||
* @param[out] line_coding Line Coding structure to be filled
|
||||
* @return esp_err_t
|
||||
*/
|
||||
esp_err_t cdc_acm_host_line_coding_get(cdc_acm_dev_hdl_t cdc_hdl, cdc_acm_line_coding_t *line_coding);
|
||||
|
||||
/**
|
||||
* @brief SetControlLineState function
|
||||
*
|
||||
* @see Chapter 6.3.12, USB CDC-PSTN specification rev. 1.2
|
||||
*
|
||||
* @param cdc_hdl CDC handle obtained from cdc_acm_host_open()
|
||||
* @param[in] dtr Indicates to DCE if DTE is present or not. This signal corresponds to V.24 signal 108/2 and RS-232 signal Data Terminal Ready.
|
||||
* @param[in] rts Carrier control for half duplex modems. This signal corresponds to V.24 signal 105 and RS-232 signal Request To Send.
|
||||
* @return esp_err_t
|
||||
*/
|
||||
esp_err_t cdc_acm_host_set_control_line_state(cdc_acm_dev_hdl_t cdc_hdl, bool dtr, bool rts);
|
||||
|
||||
/**
|
||||
* @brief SendBreak function
|
||||
*
|
||||
* This function will block until the duration_ms has passed.
|
||||
*
|
||||
* @see Chapter 6.3.13, USB CDC-PSTN specification rev. 1.2
|
||||
*
|
||||
* @param cdc_hdl CDC handle obtained from cdc_acm_host_open()
|
||||
* @param[in] duration_ms Duration of the Break signal in [ms]
|
||||
* @return esp_err_t
|
||||
*/
|
||||
esp_err_t cdc_acm_host_send_break(cdc_acm_dev_hdl_t cdc_hdl, uint16_t duration_ms);
|
||||
|
||||
/**
|
||||
* @brief Print CDC-ACM specific descriptors
|
||||
*
|
||||
* Descriptors are printed in human readable format to stdout.
|
||||
* Intended for debugging and for CDC-ACM compliant devices only.
|
||||
*
|
||||
* @param cdc_hdl CDC handle obtained from cdc_acm_host_open()
|
||||
*/
|
||||
void cdc_acm_host_desc_print(cdc_acm_dev_hdl_t cdc_hdl);
|
||||
|
||||
/**
|
||||
* @brief Get protocols defined in USB-CDC interface descriptors
|
||||
*
|
||||
* @param cdc_hdl CDC handle obtained from cdc_acm_host_open()
|
||||
* @param[out] comm Communication protocol
|
||||
* @param[out] data Data protocol
|
||||
* @return esp_err_t
|
||||
*/
|
||||
esp_err_t cdc_acm_host_protocols_get(cdc_acm_dev_hdl_t cdc_hdl, cdc_comm_protocol_t *comm, cdc_data_protocol_t *data);
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
class CdcAcmDevice
|
||||
{
|
||||
public:
|
||||
// Operators
|
||||
CdcAcmDevice() : cdc_hdl(NULL){};
|
||||
~CdcAcmDevice()
|
||||
{
|
||||
// Close CDC-ACM device, if it wasn't explicitly closed
|
||||
if (this->cdc_hdl != NULL) {
|
||||
this->close();
|
||||
}
|
||||
}
|
||||
|
||||
inline esp_err_t tx_blocking(uint8_t *data, size_t len, uint32_t timeout_ms = 100)
|
||||
{
|
||||
return cdc_acm_host_data_tx_blocking(this->cdc_hdl, data, len, timeout_ms);
|
||||
}
|
||||
|
||||
inline esp_err_t open(uint16_t vid, uint16_t pid, uint8_t interface_idx, const cdc_acm_host_device_config_t* dev_config)
|
||||
{
|
||||
return cdc_acm_host_open(vid, pid, interface_idx, dev_config, &this->cdc_hdl);
|
||||
}
|
||||
|
||||
inline esp_err_t open_vendor_specific(uint16_t vid, uint16_t pid, uint8_t interface_idx, const cdc_acm_host_device_config_t* dev_config)
|
||||
{
|
||||
return cdc_acm_host_open_vendor_specific(vid, pid, interface_idx, dev_config, &this->cdc_hdl);
|
||||
}
|
||||
|
||||
inline void close()
|
||||
{
|
||||
cdc_acm_host_close(this->cdc_hdl);
|
||||
this->cdc_hdl = NULL;
|
||||
}
|
||||
|
||||
inline esp_err_t line_coding_get(cdc_acm_line_coding_t *line_coding)
|
||||
{
|
||||
return cdc_acm_host_line_coding_get(this->cdc_hdl, line_coding);
|
||||
}
|
||||
|
||||
inline esp_err_t line_coding_set(cdc_acm_line_coding_t *line_coding)
|
||||
{
|
||||
return cdc_acm_host_line_coding_set(this->cdc_hdl, line_coding);
|
||||
}
|
||||
|
||||
inline esp_err_t set_control_line_state(bool dtr, bool rts)
|
||||
{
|
||||
return cdc_acm_host_set_control_line_state(this->cdc_hdl, dtr, rts);
|
||||
}
|
||||
|
||||
inline esp_err_t send_break(uint16_t duration_ms)
|
||||
{
|
||||
return cdc_acm_host_send_break(this->cdc_hdl, duration_ms);
|
||||
}
|
||||
|
||||
private:
|
||||
CdcAcmDevice(const CdcAcmDevice &Copy);
|
||||
CdcAcmDevice &operator= (const CdcAcmDevice &Copy);
|
||||
bool operator== (const CdcAcmDevice ¶m) const;
|
||||
bool operator!= (const CdcAcmDevice ¶m) const;
|
||||
cdc_acm_dev_hdl_t cdc_hdl;
|
||||
};
|
||||
#endif
|
||||
|
|
@ -0,0 +1,206 @@
|
|||
/*
|
||||
* SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
#include <inttypes.h>
|
||||
|
||||
/**
|
||||
* @brief USB CDC Descriptor Subtypes
|
||||
*
|
||||
* @see Table 13, USB CDC specification rev. 1.2
|
||||
*/
|
||||
typedef enum {
|
||||
CDC_DESC_SUBTYPE_HEADER = 0x00, // Header Functional Descriptor
|
||||
CDC_DESC_SUBTYPE_CALL = 0x01, // Call Management Functional Descriptor
|
||||
CDC_DESC_SUBTYPE_ACM = 0x02, // Abstract Control Management Functional Descriptor
|
||||
CDC_DESC_SUBTYPE_DLM = 0x03, // Direct Line Management Functional Descriptor
|
||||
CDC_DESC_SUBTYPE_TEL_RINGER = 0x04, // Telephone Ringer Functional Descriptor
|
||||
CDC_DESC_SUBTYPE_TEL_CLSR = 0x05, // Telephone Call and Line State Reporting Capabilities Functional Descriptor
|
||||
CDC_DESC_SUBTYPE_UNION = 0x06, // Union Functional Descriptor
|
||||
CDC_DESC_SUBTYPE_COUNTRY = 0x07, // Country Selection Functional Descriptor
|
||||
CDC_DESC_SUBTYPE_TEL_MODE = 0x08, // Telephone Operational Modes Functional Descriptor
|
||||
CDC_DESC_SUBTYPE_TERMINAL = 0x09, // USB Terminal
|
||||
CDC_DESC_SUBTYPE_NCHT = 0x0A, // Network Channel Terminal
|
||||
CDC_DESC_SUBTYPE_PROTOCOL = 0x08, // Protocol Unit
|
||||
CDC_DESC_SUBTYPE_EXTENSION = 0x0C, // Extension Unit
|
||||
CDC_DESC_SUBTYPE_MULTI_CHAN = 0x0D, // Multi-Channel Management Functional Descriptor
|
||||
CDC_DESC_SUBTYPE_CAPI = 0x0E, // CAPI Control
|
||||
CDC_DESC_SUBTYPE_ETH = 0x0F, // Ethernet Networking
|
||||
CDC_DESC_SUBTYPE_ATM = 0x10, // ATM Networking
|
||||
CDC_DESC_SUBTYPE_WHANDSET = 0x11, // Wireless Handset Control Model Functional Descriptor
|
||||
CDC_DESC_SUBTYPE_MDLM = 0x12, // Mobile Direct Line Model
|
||||
CDC_DESC_SUBTYPE_MDLM_DETAIL = 0x13, // MDLM Detail
|
||||
CDC_DESC_SUBTYPE_DMM = 0x14, // Device Management Model
|
||||
CDC_DESC_SUBTYPE_OBEX = 0x15, // OBEX Functional
|
||||
CDC_DESC_SUBTYPE_COMMAND_SET = 0x16, // Command Set
|
||||
CDC_DESC_SUBTYPE_COMMAND_SET_DETAIL = 0x17, // Command Set Detail Functional Descriptor
|
||||
CDC_DESC_SUBTYPE_TEL_CM = 0x18, // Telephone Control Model Functional Descriptor
|
||||
CDC_DESC_SUBTYPE_OBEX_SERVICE = 0x19, // OBEX Service Identifier Functional Descriptor
|
||||
CDC_DESC_SUBTYPE_NCM = 0x1A // NCM Functional Descriptor
|
||||
} __attribute__((packed)) cdc_desc_subtype_t;
|
||||
|
||||
/**
|
||||
* @brief USB CDC Subclass codes
|
||||
*
|
||||
* @see Table 4, USB CDC specification rev. 1.2
|
||||
*/
|
||||
typedef enum {
|
||||
CDC_SUBCLASS_DLCM = 0x01, // Direct Line Control Model
|
||||
CDC_SUBCLASS_ACM = 0x02, // Abstract Control Model
|
||||
CDC_SUBCLASS_TCM = 0x03, // Telephone Control Model
|
||||
CDC_SUBCLASS_MCHCM = 0x04, // Multi-Channel Control Model
|
||||
CDC_SUBCLASS_CAPI = 0x05, // CAPI Control Model
|
||||
CDC_SUBCLASS_ECM = 0x06, // Ethernet Networking Control Model
|
||||
CDC_SUBCLASS_ATM = 0x07, // ATM Networking Model
|
||||
CDC_SUBCLASS_HANDSET = 0x08, // Wireless Handset Control Model
|
||||
CDC_SUBCLASS_DEV_MAN = 0x09, // Device Management
|
||||
CDC_SUBCLASS_MOBILE = 0x0A, // Mobile Direct Line Model
|
||||
CDC_SUBCLASS_OBEX = 0x0B, // OBEX
|
||||
CDC_SUBCLASS_EEM = 0x0C, // Ethernet Emulation Model
|
||||
CDC_SUBCLASS_NCM = 0x0D // Network Control Model
|
||||
} __attribute__((packed)) cdc_subclass_t;
|
||||
|
||||
/**
|
||||
* @brief USB CDC Communications Protocol Codes
|
||||
*
|
||||
* @see Table 5, USB CDC specification rev. 1.2
|
||||
*/
|
||||
typedef enum {
|
||||
CDC_COMM_PROTOCOL_NONE = 0x00, // No class specific protocol required
|
||||
CDC_COMM_PROTOCOL_V250 = 0x01, // AT Commands: V.250 etc
|
||||
CDC_COMM_PROTOCOL_PCAA = 0x02, // AT Commands defined by PCCA-101
|
||||
CDC_COMM_PROTOCOL_PCAA_A = 0x03, // AT Commands defined by PCAA-101 & Annex O
|
||||
CDC_COMM_PROTOCOL_GSM = 0x04, // AT Commands defined by GSM 07.07
|
||||
CDC_COMM_PROTOCOL_3GPP = 0x05, // AT Commands defined by 3GPP 27.007
|
||||
CDC_COMM_PROTOCOL_TIA = 0x06, // AT Commands defined by TIA for CDMA
|
||||
CDC_COMM_PROTOCOL_EEM = 0x07, // Ethernet Emulation Model
|
||||
CDC_COMM_PROTOCOL_EXT = 0xFE, // External Protocol: Commands defined by Command Set Functional Descriptor
|
||||
CDC_COMM_PROTOCOL_VENDOR = 0xFF // Vendor-specific
|
||||
} __attribute__((packed)) cdc_comm_protocol_t;
|
||||
|
||||
/**
|
||||
* @brief USB CDC Data Protocol Codes
|
||||
*
|
||||
* @see Table 7, USB CDC specification rev. 1.2
|
||||
*/
|
||||
typedef enum {
|
||||
CDC_DATA_PROTOCOL_NONE = 0x00, // No class specific protocol required
|
||||
CDC_DATA_PROTOCOL_NCM = 0x01, // Network Transfer Block
|
||||
CDC_DATA_PROTOCOL_I430 = 0x30, // Physical interface protocol for ISDN BRI
|
||||
CDC_DATA_PROTOCOL_HDLC = 0x31, // HDLC
|
||||
CDC_DATA_PROTOCOL_Q921M = 0x50, // Management protocol for Q.921 data link protocol
|
||||
CDC_DATA_PROTOCOL_Q921 = 0x51, // Data link protocol for Q.931
|
||||
CDC_DATA_PROTOCOL_Q921TM = 0x52, // TEI-multiplexor for Q.921 data link protocol
|
||||
CDC_DATA_PROTOCOL_V42BIS = 0x90, // Data compression procedures
|
||||
CDC_DATA_PROTOCOL_Q931 = 0x91, // Euro-ISDN protocol control
|
||||
CDC_DATA_PROTOCOL_V120 = 0x92, // V.24 rate adaptation to ISDN
|
||||
CDC_DATA_PROTOCOL_CAPI = 0x93, // CAPI Commands
|
||||
CDC_DATA_PROTOCOL_VENDOR = 0xFF // Vendor-specific
|
||||
} __attribute__((packed)) cdc_data_protocol_t;
|
||||
|
||||
/**
|
||||
* @brief USB CDC Request Codes
|
||||
*
|
||||
* @see Table 19, USB CDC specification rev. 1.2
|
||||
*/
|
||||
typedef enum {
|
||||
CDC_REQ_SEND_ENCAPSULATED_COMMAND = 0x00,
|
||||
CDC_REQ_GET_ENCAPSULATED_RESPONSE = 0x01,
|
||||
CDC_REQ_SET_COMM_FEATURE = 0x02,
|
||||
CDC_REQ_GET_COMM_FEATURE = 0x03,
|
||||
CDC_REQ_CLEAR_COMM_FEATURE = 0x04,
|
||||
CDC_REQ_SET_AUX_LINE_STATE = 0x10,
|
||||
CDC_REQ_SET_HOOK_STATE = 0x11,
|
||||
CDC_REQ_PULSE_SETUP = 0x12,
|
||||
CDC_REQ_SEND_PULSE = 0x13,
|
||||
CDC_REQ_SET_PULSE_TIME = 0x14,
|
||||
CDC_REQ_RING_AUX_JACK = 0x15,
|
||||
CDC_REQ_SET_LINE_CODING = 0x20,
|
||||
CDC_REQ_GET_LINE_CODING = 0x21,
|
||||
CDC_REQ_SET_CONTROL_LINE_STATE = 0x22,
|
||||
CDC_REQ_SEND_BREAK = 0x23,
|
||||
CDC_REQ_SET_RINGER_PARMS = 0x30,
|
||||
CDC_REQ_GET_RINGER_PARMS = 0x31,
|
||||
CDC_REQ_SET_OPERATION_PARMS = 0x32,
|
||||
CDC_REQ_GET_OPERATION_PARMS = 0x33,
|
||||
CDC_REQ_SET_LINE_PARMS = 0x34,
|
||||
CDC_REQ_GET_LINE_PARMS = 0x35,
|
||||
CDC_REQ_DIAL_DIGITS = 0x36,
|
||||
CDC_REQ_SET_UNIT_PARAMETER = 0x37,
|
||||
CDC_REQ_GET_UNIT_PARAMETER = 0x38,
|
||||
CDC_REQ_CLEAR_UNIT_PARAMETER = 0x39,
|
||||
CDC_REQ_GET_PROFILE = 0x3A,
|
||||
CDC_REQ_SET_ETHERNET_MULTICAST_FILTERS = 0x40,
|
||||
CDC_REQ_SET_ETHERNET_POWER_MANAGEMENT_PATTERN_FILTER = 0x41,
|
||||
CDC_REQ_GET_ETHERNET_POWER_MANAGEMENT_PATTERN_FILTER = 0x42,
|
||||
CDC_REQ_SET_ETHERNET_PACKET_FILTER = 0x43,
|
||||
CDC_REQ_GET_ETHERNET_STATISTIC = 0x44,
|
||||
CDC_REQ_SET_ATM_DATA_FORMAT = 0x50,
|
||||
CDC_REQ_GET_ATM_DEVICE_STATISTICS = 0x51,
|
||||
CDC_REQ_SET_ATM_DEFAULT_VC = 0x52,
|
||||
CDC_REQ_GET_ATM_VC_STATISTICS = 0x53,
|
||||
CDC_REQ_GET_NTB_PARAMETERS = 0x80,
|
||||
CDC_REQ_GET_NET_ADDRESS = 0x81,
|
||||
CDC_REQ_SET_NET_ADDRESS = 0x82,
|
||||
CDC_REQ_GET_NTB_FORMAT = 0x83,
|
||||
CDC_REQ_SET_NTB_FORMAT = 0x84,
|
||||
CDC_REQ_GET_NTB_INPUT_SIZE = 0x85,
|
||||
CDC_REQ_SET_NTB_INPUT_SIZE = 0x86,
|
||||
CDC_REQ_GET_MAX_DATAGRAM_SIZE = 0x87,
|
||||
CDC_REQ_SET_MAX_DATAGRAM_SIZE = 0x88,
|
||||
CDC_REQ_GET_CRC_MODE = 0x89,
|
||||
CDC_REQ_SET_CRC_MODE = 0x8A
|
||||
} __attribute__((packed)) cdc_request_code_t;
|
||||
|
||||
/**
|
||||
* @brief USB CDC Notification Codes
|
||||
*
|
||||
* @see Table 20, USB CDC specification rev. 1.2
|
||||
*/
|
||||
typedef enum {
|
||||
CDC_NOTIF_NETWORK_CONNECTION = 0x00,
|
||||
CDC_NOTIF_RESPONSE_AVAILABLE = 0x01,
|
||||
CDC_NOTIF_AUX_JACK_HOOK_STATE = 0x08,
|
||||
CDC_NOTIF_RING_DETECT = 0x09,
|
||||
CDC_NOTIF_SERIAL_STATE = 0x20,
|
||||
CDC_NOTIF_CALL_STATE_CHANGE = 0x28,
|
||||
CDC_NOTIF_LINE_STATE_CHANGE = 0x29,
|
||||
CDC_NOTIF_CONNECTION_SPEED_CHANGE = 0x2A
|
||||
} __attribute__((packed)) cdc_notification_code_t;
|
||||
|
||||
typedef struct {
|
||||
uint8_t bmRequestType;
|
||||
cdc_notification_code_t bNotificationCode;
|
||||
uint16_t wValue;
|
||||
uint16_t wIndex;
|
||||
uint16_t wLength;
|
||||
uint8_t Data[];
|
||||
} __attribute__((packed)) cdc_notification_t;
|
||||
|
||||
/**
|
||||
* @brief USB CDC Header Functional Descriptor
|
||||
*
|
||||
* @see Table 15, USB CDC specification rev. 1.2
|
||||
*/
|
||||
typedef struct {
|
||||
uint8_t bFunctionLength;
|
||||
const uint8_t bDescriptorType; // Upper nibble: CDC code 0x02, Lower nibble: intf/ep descriptor type 0x04/0x05
|
||||
const cdc_desc_subtype_t bDescriptorSubtype;
|
||||
uint16_t bcdCDC; // CDC version as binary-coded decimal. This driver is written for version 1.2
|
||||
} __attribute__((packed)) cdc_header_desc_t;
|
||||
|
||||
/**
|
||||
* @brief USB CDC Union Functional Descriptor
|
||||
*
|
||||
* @see Table 16, USB CDC specification rev. 1.2
|
||||
*/
|
||||
typedef struct {
|
||||
uint8_t bFunctionLength;
|
||||
const uint8_t bDescriptorType; // Upper nibble: CDC code 0x02, Lower nibble: intf/ep descriptor type 0x04/0x05
|
||||
const cdc_desc_subtype_t bDescriptorSubtype;
|
||||
const uint8_t bControlInterface; // Master/controlling interface
|
||||
uint8_t bSubordinateInterface[]; // Slave/subordinate interfaces
|
||||
} __attribute__((packed)) cdc_union_desc_t;
|
||||
|
|
@ -0,0 +1,3 @@
|
|||
idf_component_register(SRCS "test_cdc_acm_host.c"
|
||||
INCLUDE_DIRS "."
|
||||
REQUIRES cdc_acm_host unity)
|
||||
|
|
@ -0,0 +1,375 @@
|
|||
/*
|
||||
* SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*/
|
||||
|
||||
#include "soc/soc_caps.h"
|
||||
#if SOC_USB_OTG_SUPPORTED
|
||||
|
||||
#include <stdio.h>
|
||||
#include "esp_system.h"
|
||||
#include "freertos/FreeRTOS.h"
|
||||
#include "freertos/task.h"
|
||||
#include "esp_log.h"
|
||||
#include "esp_err.h"
|
||||
|
||||
#include "usb/usb_host.h"
|
||||
#include "usb/cdc_acm_host.h"
|
||||
#include <string.h>
|
||||
|
||||
#include "esp_intr_alloc.h"
|
||||
|
||||
#include "unity.h"
|
||||
#include "soc/usb_wrap_struct.h"
|
||||
|
||||
static uint8_t tx_buf[] = "HELLO";
|
||||
static uint8_t tx_buf2[] = "WORLD";
|
||||
static int nb_of_responses;
|
||||
static int nb_of_responses2;
|
||||
|
||||
void test_usb_force_conn_state(bool connected, TickType_t delay_ticks)
|
||||
{
|
||||
if (delay_ticks > 0) {
|
||||
//Delay of 0 ticks causes a yield. So skip if delay_ticks is 0.
|
||||
vTaskDelay(delay_ticks);
|
||||
}
|
||||
usb_wrap_dev_t *wrap = &USB_WRAP;
|
||||
if (connected) {
|
||||
//Disable test mode to return to previous internal PHY configuration
|
||||
wrap->test_conf.test_enable = 0;
|
||||
} else {
|
||||
/*
|
||||
Mimic a disconnection by using the internal PHY's test mode.
|
||||
Force Output Enable to 1 (even if the controller isn't outputting). With test_tx_dp and test_tx_dm set to 0,
|
||||
this will look like a disconnection.
|
||||
*/
|
||||
wrap->test_conf.val = 0;
|
||||
wrap->test_conf.test_usb_wrap_oe = 1;
|
||||
wrap->test_conf.test_enable = 1;
|
||||
}
|
||||
}
|
||||
|
||||
void usb_lib_task(void *arg)
|
||||
{
|
||||
// Install USB Host driver. Should only be called once in entire application
|
||||
const usb_host_config_t host_config = {
|
||||
.intr_flags = ESP_INTR_FLAG_LEVEL1,
|
||||
};
|
||||
TEST_ASSERT_EQUAL(ESP_OK, usb_host_install(&host_config));
|
||||
printf("USB Host installed\n");
|
||||
xTaskNotifyGive(arg);
|
||||
|
||||
while (1) {
|
||||
// Start handling system events
|
||||
uint32_t event_flags;
|
||||
usb_host_lib_handle_events(portMAX_DELAY, &event_flags);
|
||||
if (event_flags & USB_HOST_LIB_EVENT_FLAGS_NO_CLIENTS) {
|
||||
printf("No more clients: clean up\n");
|
||||
// The device should not have been freed yet, so we expect an ESP_ERR_NOT_FINISHED
|
||||
TEST_ASSERT_EQUAL(ESP_ERR_NOT_FINISHED, usb_host_device_free_all());
|
||||
}
|
||||
if (event_flags & USB_HOST_LIB_EVENT_FLAGS_ALL_FREE) {
|
||||
printf("All free: uninstall USB lib\n");
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
// Clean up USB Host
|
||||
vTaskDelay(10); // Short delay to allow clients clean-up
|
||||
usb_host_lib_handle_events(0, NULL); // Make sure there are now pending events
|
||||
TEST_ASSERT_EQUAL(ESP_OK, usb_host_uninstall());
|
||||
vTaskDelete(NULL);
|
||||
}
|
||||
|
||||
void test_install_cdc_driver(void)
|
||||
{
|
||||
// Create a task that will handle USB library events
|
||||
TEST_ASSERT_EQUAL(pdTRUE, xTaskCreate(usb_lib_task, "usb_lib", 4*4096, xTaskGetCurrentTaskHandle(), 10, NULL));
|
||||
ulTaskNotifyTake(false, 1000);
|
||||
|
||||
printf("Installing CDC-ACM driver\n");
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_install(NULL));
|
||||
}
|
||||
|
||||
/* ------------------------------- Callbacks -------------------------------- */
|
||||
static void handle_rx(uint8_t *data, size_t data_len, void *arg)
|
||||
{
|
||||
printf("Data received\n");
|
||||
nb_of_responses++;
|
||||
TEST_ASSERT_EQUAL_STRING_LEN(data, arg, data_len);
|
||||
}
|
||||
|
||||
static void handle_rx2(uint8_t *data, size_t data_len, void *arg)
|
||||
{
|
||||
printf("Data received 2\n");
|
||||
nb_of_responses2++;
|
||||
TEST_ASSERT_EQUAL_STRING_LEN(data, arg, data_len);
|
||||
}
|
||||
|
||||
static void notif_cb(cdc_acm_dev_hdl_t cdc_hdl, const cdc_acm_host_dev_event_data_t *event, void *user_ctx)
|
||||
{
|
||||
switch (event->type) {
|
||||
case CDC_ACM_HOST_ERROR:
|
||||
printf("Error event %d\n", event->data.error);
|
||||
break;
|
||||
case CDC_ACM_HOST_SERIAL_STATE:
|
||||
break;
|
||||
case CDC_ACM_HOST_NETWORK_CONNECTION:
|
||||
break;
|
||||
case CDC_ACM_HOST_DEVICE_DISCONNECTED:
|
||||
printf("Disconnection event\n");
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_close(cdc_hdl));
|
||||
xTaskNotifyGive(user_ctx);
|
||||
break;
|
||||
default:
|
||||
assert(false);
|
||||
}
|
||||
}
|
||||
|
||||
/* Basic test to check CDC communication:
|
||||
* open/read/write/close device
|
||||
* CDC-ACM specific commands: set/get_line_coding, set_control_line_state */
|
||||
TEST_CASE("USB Host CDC-ACM driver: Basic test", "[cdc_acm][ignore]")
|
||||
{
|
||||
nb_of_responses = 0;
|
||||
cdc_acm_dev_hdl_t cdc_dev = NULL;
|
||||
|
||||
test_install_cdc_driver();
|
||||
|
||||
const cdc_acm_host_device_config_t dev_config = {
|
||||
.connection_timeout_ms = 500,
|
||||
.out_buffer_size = 64,
|
||||
.event_cb = notif_cb,
|
||||
.data_cb = handle_rx,
|
||||
.user_arg = tx_buf,
|
||||
};
|
||||
|
||||
printf("Opening CDC-ACM device\n");
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_open(0x303A, 0x4002, 0, &dev_config, &cdc_dev)); // 0x303A:0x4002 (TinyUSB Dual CDC device)
|
||||
TEST_ASSERT_NOT_NULL(cdc_dev);
|
||||
cdc_acm_host_desc_print(cdc_dev);
|
||||
vTaskDelay(100);
|
||||
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_data_tx_blocking(cdc_dev, tx_buf, sizeof(tx_buf), 1000));
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_data_tx_blocking(cdc_dev, tx_buf, sizeof(tx_buf), 1000));
|
||||
vTaskDelay(100); // Wait until responses are processed
|
||||
|
||||
// We sent two messages, should get two responses
|
||||
TEST_ASSERT_EQUAL(2, nb_of_responses);
|
||||
|
||||
cdc_acm_line_coding_t line_coding_get;
|
||||
const cdc_acm_line_coding_t line_coding_set = {
|
||||
.dwDTERate = 9600,
|
||||
.bDataBits = 7,
|
||||
.bParityType = 1,
|
||||
.bCharFormat = 1,
|
||||
};
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_line_coding_set(cdc_dev, &line_coding_set));
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_line_coding_get(cdc_dev, &line_coding_get));
|
||||
TEST_ASSERT_EQUAL_MEMORY(&line_coding_set, &line_coding_get, sizeof(cdc_acm_line_coding_t));
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_set_control_line_state(cdc_dev, true, false));
|
||||
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_close(cdc_dev));
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_uninstall());
|
||||
|
||||
vTaskDelay(20); //Short delay to allow task to be cleaned up
|
||||
}
|
||||
|
||||
/* Test communication with multiple CDC-ACM devices from one thread */
|
||||
TEST_CASE("USB Host CDC-ACM driver: Multiple devices test", "[cdc_acm][ignore]")
|
||||
{
|
||||
nb_of_responses = 0;
|
||||
nb_of_responses2 = 0;
|
||||
|
||||
test_install_cdc_driver();
|
||||
|
||||
printf("Opening 2 CDC-ACM devices\n");
|
||||
cdc_acm_dev_hdl_t cdc_dev1, cdc_dev2;
|
||||
cdc_acm_host_device_config_t dev_config = {
|
||||
.connection_timeout_ms = 1000,
|
||||
.out_buffer_size = 64,
|
||||
.event_cb = notif_cb,
|
||||
.data_cb = handle_rx,
|
||||
.user_arg = tx_buf,
|
||||
};
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_open(0x303A, 0x4002, 0, &dev_config, &cdc_dev1)); // 0x303A:0x4002 (TinyUSB Dual CDC device)
|
||||
dev_config.data_cb = handle_rx2;
|
||||
dev_config.user_arg = tx_buf2;
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_open(0x303A, 0x4002, 2, &dev_config, &cdc_dev2)); // 0x303A:0x4002 (TinyUSB Dual CDC device)
|
||||
TEST_ASSERT_NOT_NULL(cdc_dev1);
|
||||
TEST_ASSERT_NOT_NULL(cdc_dev2);
|
||||
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_data_tx_blocking(cdc_dev1, tx_buf, sizeof(tx_buf), 1000));
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_data_tx_blocking(cdc_dev2, tx_buf2, sizeof(tx_buf2), 1000));
|
||||
|
||||
vTaskDelay(100); // Wait for RX callbacks
|
||||
|
||||
// We sent two messages, should get two responses
|
||||
TEST_ASSERT_EQUAL(1, nb_of_responses);
|
||||
TEST_ASSERT_EQUAL(1, nb_of_responses2);
|
||||
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_close(cdc_dev1));
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_close(cdc_dev2));
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_uninstall());
|
||||
|
||||
//Short delay to allow task to be cleaned up
|
||||
vTaskDelay(20);
|
||||
}
|
||||
|
||||
#define MULTIPLE_THREADS_TRANSFERS_NUM 5
|
||||
#define MULTIPLE_THREADS_TASKS_NUM 4
|
||||
void tx_task(void *arg)
|
||||
{
|
||||
cdc_acm_dev_hdl_t cdc_dev = (cdc_acm_dev_hdl_t) arg;
|
||||
// Send multiple transfers to make sure that some of them will run at the same time
|
||||
for (int i = 0; i < MULTIPLE_THREADS_TRANSFERS_NUM; i++) {
|
||||
// BULK endpoints
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_data_tx_blocking(cdc_dev, tx_buf, sizeof(tx_buf), 1000));
|
||||
|
||||
// CTRL endpoints
|
||||
cdc_acm_line_coding_t line_coding_get;
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_line_coding_get(cdc_dev, &line_coding_get));
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_set_control_line_state(cdc_dev, true, false));
|
||||
}
|
||||
vTaskDelete(NULL);
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Multiple threads test
|
||||
*
|
||||
* In this test, one CDC device is accessed from multiple threads.
|
||||
* It has to be opened/closed just once, though.
|
||||
*/
|
||||
TEST_CASE("USB Host CDC-ACM driver: Multiple threads test", "[cdc_acm][ignore]")
|
||||
{
|
||||
nb_of_responses = 0;
|
||||
cdc_acm_dev_hdl_t cdc_dev;
|
||||
test_install_cdc_driver();
|
||||
|
||||
const cdc_acm_host_device_config_t dev_config = {
|
||||
.connection_timeout_ms = 5000,
|
||||
.out_buffer_size = 64,
|
||||
.event_cb = notif_cb,
|
||||
.data_cb = handle_rx,
|
||||
.user_arg = tx_buf,
|
||||
};
|
||||
|
||||
printf("Opening CDC-ACM device\n");
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_open(0x303A, 0x4002, 0, &dev_config, &cdc_dev)); // 0x303A:0x4002 (TinyUSB Dual CDC device)
|
||||
TEST_ASSERT_NOT_NULL(cdc_dev);
|
||||
|
||||
// Create two tasks that will try to access cdc_dev
|
||||
for (int i = 0; i < MULTIPLE_THREADS_TASKS_NUM; i++) {
|
||||
TEST_ASSERT_EQUAL(pdTRUE, xTaskCreate(tx_task, "CDC TX", 4096, cdc_dev, i + 3, NULL));
|
||||
}
|
||||
|
||||
// Wait until all tasks finish
|
||||
vTaskDelay(pdMS_TO_TICKS(500));
|
||||
TEST_ASSERT_EQUAL(MULTIPLE_THREADS_TASKS_NUM * MULTIPLE_THREADS_TRANSFERS_NUM, nb_of_responses);
|
||||
|
||||
// Clean-up
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_close(cdc_dev));
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_uninstall());
|
||||
vTaskDelay(20);
|
||||
}
|
||||
|
||||
/* Test CDC driver reaction to USB device sudden disconnection */
|
||||
TEST_CASE("USB Host CDC-ACM driver: Sudden disconnection test", "[cdc_acm][ignore]")
|
||||
{
|
||||
test_install_cdc_driver();
|
||||
|
||||
cdc_acm_dev_hdl_t cdc_dev;
|
||||
cdc_acm_host_device_config_t dev_config = {
|
||||
.connection_timeout_ms = 1000,
|
||||
.out_buffer_size = 64,
|
||||
.event_cb = notif_cb,
|
||||
.data_cb = handle_rx
|
||||
};
|
||||
dev_config.user_arg = xTaskGetCurrentTaskHandle();
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_open(0x303A, 0x4002, 0, &dev_config, &cdc_dev));
|
||||
TEST_ASSERT_NOT_NULL(cdc_dev);
|
||||
|
||||
test_usb_force_conn_state(false, pdMS_TO_TICKS(10));
|
||||
// Notify will succeed only if CDC_ACM_HOST_DEVICE_DISCONNECTED notification was generated
|
||||
TEST_ASSERT_EQUAL(1, ulTaskNotifyTake(false, pdMS_TO_TICKS(100)));
|
||||
|
||||
test_usb_force_conn_state(true, 0); // Switch back to real PHY
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_uninstall());
|
||||
vTaskDelay(20); //Short delay to allow task to be cleaned up
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief CDC-ACM error handling test
|
||||
*
|
||||
* There are multiple erroneous scenarios checked in this test:
|
||||
*
|
||||
* -# Install CDC-ACM driver without USB Host
|
||||
* -# Open device without installed driver
|
||||
* -# Uninstall driver before installing it
|
||||
* -# Open non-existent device
|
||||
* -# Open the same device twice
|
||||
* -# Uninstall driver with open devices
|
||||
* -# Send data that is too large
|
||||
* -# Send unsupported CDC request
|
||||
* -# Write to read-only device
|
||||
*/
|
||||
TEST_CASE("USB Host CDC-ACM driver: Error handling", "[cdc_acm][ignore]")
|
||||
{
|
||||
cdc_acm_dev_hdl_t cdc_dev;
|
||||
cdc_acm_host_device_config_t dev_config = {
|
||||
.connection_timeout_ms = 500,
|
||||
.out_buffer_size = 64,
|
||||
.event_cb = notif_cb,
|
||||
.data_cb = handle_rx
|
||||
};
|
||||
|
||||
// Install CDC-ACM driver without USB Host
|
||||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_STATE, cdc_acm_host_install(NULL));
|
||||
|
||||
// Open device without installed driver
|
||||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_STATE, cdc_acm_host_open(0x303A, 0x4002, 0, &dev_config, &cdc_dev));
|
||||
|
||||
// Uninstall driver before installing it
|
||||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_STATE, cdc_acm_host_uninstall());
|
||||
|
||||
// Properly install USB and CDC drivers
|
||||
test_install_cdc_driver();
|
||||
|
||||
// Open non-existent device
|
||||
TEST_ASSERT_EQUAL(ESP_ERR_NOT_FOUND, cdc_acm_host_open(0x303A, 0x1234, 0, &dev_config, &cdc_dev)); // 0x303A:0x1234 this device is not connected to USB Host
|
||||
TEST_ASSERT_NULL(cdc_dev);
|
||||
|
||||
// Open regular device
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_open(0x303A, 0x4002, 0, &dev_config, &cdc_dev));
|
||||
TEST_ASSERT_NOT_NULL(cdc_dev);
|
||||
|
||||
// Open one CDC-ACM device twice //@todo this test is commented out due to bug in usb_host
|
||||
//cdc_acm_dev_hdl_t cdc_dev_test;
|
||||
//TEST_ASSERT_EQUAL(ESP_ERR_INVALID_STATE, cdc_acm_host_open(0x303A, 0x4002, 0, &dev_config, &cdc_dev_test));
|
||||
//TEST_ASSERT_NULL(cdc_dev_test);
|
||||
|
||||
// Uninstall driver with open devices
|
||||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_STATE, cdc_acm_host_uninstall());
|
||||
|
||||
// Send data that is too large and NULL data
|
||||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_SIZE, cdc_acm_host_data_tx_blocking(cdc_dev, tx_buf, 1024, 1000));
|
||||
TEST_ASSERT_EQUAL(ESP_ERR_INVALID_ARG, cdc_acm_host_data_tx_blocking(cdc_dev, NULL, 10, 1000));
|
||||
|
||||
// Change mode to read-only and try to write to it
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_close(cdc_dev));
|
||||
dev_config.out_buffer_size = 0; // Read-only device
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_open(0x303A, 0x4002, 0, &dev_config, &cdc_dev));
|
||||
TEST_ASSERT_NOT_NULL(cdc_dev);
|
||||
TEST_ASSERT_EQUAL(ESP_ERR_NOT_SUPPORTED, cdc_acm_host_data_tx_blocking(cdc_dev, tx_buf, sizeof(tx_buf), 1000));
|
||||
|
||||
// Send unsupported CDC request (TinyUSB accepts SendBreak command, eventhough it doesn't support it)
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_send_break(cdc_dev, 100));
|
||||
|
||||
// Clean-up
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_close(cdc_dev));
|
||||
TEST_ASSERT_EQUAL(ESP_OK, cdc_acm_host_uninstall());
|
||||
vTaskDelay(20);
|
||||
}
|
||||
|
||||
#endif
|
||||
Loading…
Reference in New Issue