576 lines
21 KiB
Plaintext
Executable File
576 lines
21 KiB
Plaintext
Executable File
/* generated memory regions file - do not edit */
|
|
RAM_START = 0x20000000;
|
|
RAM_LENGTH = 0x20000;
|
|
FLASH_START = 0x00000000;
|
|
FLASH_LENGTH = 0x100000;
|
|
DATA_FLASH_START = 0x08000000;
|
|
DATA_FLASH_LENGTH = 0x2000;
|
|
OPTION_SETTING_START = 0x0100A100;
|
|
OPTION_SETTING_LENGTH = 0x100;
|
|
OPTION_SETTING_S_START = 0x0100A200;
|
|
OPTION_SETTING_S_LENGTH = 0x100;
|
|
ID_CODE_START = 0x00000000;
|
|
ID_CODE_LENGTH = 0x0;
|
|
SDRAM_START = 0x90000000;
|
|
SDRAM_LENGTH = 0x0;
|
|
QSPI_FLASH_START = 0x60000000;
|
|
QSPI_FLASH_LENGTH = 0x4000000;
|
|
OSPI_DEVICE_0_START = 0x68000000;
|
|
OSPI_DEVICE_0_LENGTH = 0x0;
|
|
OSPI_DEVICE_1_START = 0x70000000;
|
|
OSPI_DEVICE_1_LENGTH = 0x0;
|
|
|
|
/*
|
|
Linker File for Renesas FSP
|
|
*/
|
|
|
|
QSPI_FLASH_PRV_LENGTH = DEFINED(QSPI_FLASH_SIZE) ? ABSOLUTE(QSPI_FLASH_SIZE) : ABSOLUTE(QSPI_FLASH_LENGTH);
|
|
OSPI_DEVICE_0_PRV_LENGTH = DEFINED(OSPI_DEVICE_0_SIZE) ? ABSOLUTE(OSPI_DEVICE_0_SIZE) : ABSOLUTE(OSPI_DEVICE_0_LENGTH);
|
|
OSPI_DEVICE_1_PRV_LENGTH = DEFINED(OSPI_DEVICE_1_SIZE) ? ABSOLUTE(OSPI_DEVICE_1_SIZE) : ABSOLUTE(OSPI_DEVICE_1_LENGTH);
|
|
|
|
/* This is a non-secure project if the OPTION_SETTING region is non-zero and it does not start at the base address for
|
|
* secure option settings (meaning the secure option settings were already allocated in the secure project). */
|
|
__TZ_NS_PROJECT = LENGTH(OPTION_SETTING) && DEFINED(OPTION_SETTING_S_START) && (ABSOLUTE(OPTION_SETTING_START_S) != ORIGIN(OPTION_SETTING));
|
|
|
|
/* This is a secure project if the option setting base address matches the option setting base address for secure
|
|
* option settings. This is also set for flat projects because the CPU runs in secure mode for flat projects.
|
|
* This is not defined for projects that do not support TrustZone. */
|
|
__TZ_S_PROJECT = LENGTH(OPTION_SETTING) && DEFINED(OPTION_SETTING_S_START) && (ABSOLUTE(OPTION_SETTING_START_S) == ORIGIN(OPTION_SETTING));
|
|
|
|
/* If a flat (secure) project has defined RAM_NS_BUFFER_LENGTH, then emit IDAU symbols to allocate non-secure RAM. */
|
|
__RESERVE_NS_RAM = __TZ_S_PROJECT && DEFINED(RAM_NS_BUFFER_LENGTH);
|
|
|
|
RAM_NS_BUFFER_BLOCK_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? ALIGN(RAM_NS_BUFFER_LENGTH, 8192) : 0;
|
|
RAM_NS_BUFFER_LENGTH = DEFINED(RAM_NS_BUFFER_LENGTH) ? RAM_NS_BUFFER_LENGTH : 0;
|
|
RAM_NS_BUFFER_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_LENGTH;
|
|
RAM_NS_BUFFER_BLOCK_START = RAM_START + RAM_LENGTH - RAM_NS_BUFFER_BLOCK_LENGTH;
|
|
|
|
/* Define memory regions. */
|
|
MEMORY
|
|
{
|
|
FLASH (rx) : ORIGIN = FLASH_START, LENGTH = FLASH_LENGTH
|
|
RAM (rwx) : ORIGIN = RAM_START, LENGTH = RAM_LENGTH
|
|
DATA_FLASH (rx) : ORIGIN = DATA_FLASH_START, LENGTH = DATA_FLASH_LENGTH
|
|
QSPI_FLASH (rx) : ORIGIN = QSPI_FLASH_START, LENGTH = QSPI_FLASH_PRV_LENGTH
|
|
OSPI_DEVICE_0 (rx) : ORIGIN = OSPI_DEVICE_0_START, LENGTH = OSPI_DEVICE_0_PRV_LENGTH
|
|
OSPI_DEVICE_1 (rx) : ORIGIN = OSPI_DEVICE_1_START, LENGTH = OSPI_DEVICE_1_PRV_LENGTH
|
|
SDRAM (rwx) : ORIGIN = SDRAM_START, LENGTH = SDRAM_LENGTH
|
|
OPTION_SETTING (r): ORIGIN = OPTION_SETTING_START, LENGTH = OPTION_SETTING_LENGTH
|
|
OPTION_SETTING_S (r): ORIGIN = OPTION_SETTING_S_START, LENGTH = OPTION_SETTING_S_LENGTH
|
|
ID_CODE (rx) : ORIGIN = ID_CODE_START, LENGTH = ID_CODE_LENGTH
|
|
}
|
|
|
|
OPTION_SETTING_START_NS = 0x0100A180;
|
|
OPTION_SETTING_START_S = 0x0100A100;
|
|
|
|
/* Library configurations */
|
|
GROUP(libgcc.a libc.a libm.a libnosys.a)
|
|
|
|
/* Linker script to place sections and symbol values. Should be used together
|
|
* with other linker script that defines memory regions FLASH and RAM.
|
|
* It references following symbols, which must be defined in code:
|
|
* Reset_Handler : Entry of reset handler
|
|
*
|
|
* It defines following symbols, which code can use without definition:
|
|
* __exidx_start
|
|
* __exidx_end
|
|
* __copy_table_start__
|
|
* __copy_table_end__
|
|
* __zero_table_start__
|
|
* __zero_table_end__
|
|
* __etext
|
|
* __data_start__
|
|
* __preinit_array_start
|
|
* __preinit_array_end
|
|
* __init_array_start
|
|
* __init_array_end
|
|
* __fini_array_start
|
|
* __fini_array_end
|
|
* __data_end__
|
|
* __bss_start__
|
|
* __bss_end__
|
|
* __HeapLimit
|
|
* __StackLimit
|
|
* __StackTop
|
|
* __stack
|
|
* __Vectors_End
|
|
* __Vectors_Size
|
|
* __qspi_flash_start__
|
|
* __qspi_flash_end__
|
|
* __qspi_flash_code_size__
|
|
* __qspi_region_max_size__
|
|
* __qspi_region_start_address__
|
|
* __qspi_region_end_address__
|
|
* __ospi_device_0_start__
|
|
* __ospi_device_0_end__
|
|
* __ospi_device_0_code_size__
|
|
* __ospi_device_0_region_max_size__
|
|
* __ospi_device_0_region_start_address__
|
|
* __ospi_device_0_region_end_address__
|
|
* __ospi_device_1_start__
|
|
* __ospi_device_1_end__
|
|
* __ospi_device_1_code_size__
|
|
* __ospi_device_1_region_max_size__
|
|
* __ospi_device_1_region_start_address__
|
|
* __ospi_device_1_region_end_address__
|
|
*/
|
|
ENTRY(Reset_Handler)
|
|
|
|
SECTIONS
|
|
{
|
|
.text :
|
|
{
|
|
__tz_FLASH_S = ABSOLUTE(FLASH_START);
|
|
__ROM_Start = .;
|
|
|
|
/* Even though the vector table is not 256 entries (1KB) long, we still allocate that much
|
|
* space because ROM registers are at address 0x400 and there is very little space
|
|
* in between. */
|
|
KEEP(*(.fixed_vectors*))
|
|
KEEP(*(.application_vectors*))
|
|
__Vectors_End = .;
|
|
|
|
/* ROM Registers start at address 0x00000400 */
|
|
. = __ROM_Start + 0x400;
|
|
KEEP(*(.rom_registers*))
|
|
|
|
/* Reserving 0x100 bytes of space for ROM registers. */
|
|
. = __ROM_Start + 0x500;
|
|
|
|
*(.text*)
|
|
|
|
KEEP(*(.version))
|
|
KEEP(*(.init))
|
|
KEEP(*(.fini))
|
|
|
|
/* .ctors */
|
|
*crtbegin.o(.ctors)
|
|
*crtbegin?.o(.ctors)
|
|
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .ctors)
|
|
*(SORT(.ctors.*))
|
|
*(.ctors)
|
|
|
|
/* .dtors */
|
|
*crtbegin.o(.dtors)
|
|
*crtbegin?.o(.dtors)
|
|
*(EXCLUDE_FILE(*crtend?.o *crtend.o) .dtors)
|
|
*(SORT(.dtors.*))
|
|
*(.dtors)
|
|
|
|
*(.rodata*)
|
|
__usb_dev_descriptor_start_fs = .;
|
|
KEEP(*(.usb_device_desc_fs*))
|
|
__usb_cfg_descriptor_start_fs = .;
|
|
KEEP(*(.usb_config_desc_fs*))
|
|
__usb_interface_descriptor_start_fs = .;
|
|
KEEP(*(.usb_interface_desc_fs*))
|
|
__usb_descriptor_end_fs = .;
|
|
__usb_dev_descriptor_start_hs = .;
|
|
KEEP(*(.usb_device_desc_hs*))
|
|
__usb_cfg_descriptor_start_hs = .;
|
|
KEEP(*(.usb_config_desc_hs*))
|
|
__usb_interface_descriptor_start_hs = .;
|
|
KEEP(*(.usb_interface_desc_hs*))
|
|
__usb_descriptor_end_hs = .;
|
|
|
|
KEEP(*(.eh_frame*))
|
|
|
|
__ROM_End = .;
|
|
} > FLASH = 0xFF
|
|
|
|
__Vectors_Size = __Vectors_End - __Vectors;
|
|
|
|
.ARM.extab :
|
|
{
|
|
*(.ARM.extab* .gnu.linkonce.armextab.*)
|
|
} > FLASH
|
|
|
|
__exidx_start = .;
|
|
.ARM.exidx :
|
|
{
|
|
*(.ARM.exidx* .gnu.linkonce.armexidx.*)
|
|
} > FLASH
|
|
__exidx_end = .;
|
|
|
|
/* To copy multiple ROM to RAM sections,
|
|
* uncomment .copy.table section and,
|
|
* define __STARTUP_COPY_MULTIPLE in startup_ARMCMx.S */
|
|
/*
|
|
.copy.table :
|
|
{
|
|
. = ALIGN(4);
|
|
__copy_table_start__ = .;
|
|
LONG (__etext)
|
|
LONG (__data_start__)
|
|
LONG (__data_end__ - __data_start__)
|
|
LONG (__etext2)
|
|
LONG (__data2_start__)
|
|
LONG (__data2_end__ - __data2_start__)
|
|
__copy_table_end__ = .;
|
|
} > FLASH
|
|
*/
|
|
|
|
/* To clear multiple BSS sections,
|
|
* uncomment .zero.table section and,
|
|
* define __STARTUP_CLEAR_BSS_MULTIPLE in startup_ARMCMx.S */
|
|
/*
|
|
.zero.table :
|
|
{
|
|
. = ALIGN(4);
|
|
__zero_table_start__ = .;
|
|
LONG (__bss_start__)
|
|
LONG (__bss_end__ - __bss_start__)
|
|
LONG (__bss2_start__)
|
|
LONG (__bss2_end__ - __bss2_start__)
|
|
__zero_table_end__ = .;
|
|
} > FLASH
|
|
*/
|
|
|
|
__etext = .;
|
|
|
|
__tz_RAM_S = ORIGIN(RAM);
|
|
|
|
/* If DTC is used, put the DTC vector table at the start of SRAM.
|
|
This avoids memory holes due to 1K alignment required by it. */
|
|
.fsp_dtc_vector_table (NOLOAD) :
|
|
{
|
|
. = ORIGIN(RAM);
|
|
*(.fsp_dtc_vector_table)
|
|
} > RAM
|
|
|
|
/* Initialized data section. */
|
|
.data :
|
|
{
|
|
__data_start__ = .;
|
|
. = ALIGN(4);
|
|
|
|
__Code_In_RAM_Start = .;
|
|
|
|
KEEP(*(.code_in_ram*))
|
|
__Code_In_RAM_End = .;
|
|
|
|
*(vtable)
|
|
/* Don't use *(.data*) because it will place data meant for .data_flash in this section. */
|
|
*(.data.*)
|
|
*(.data)
|
|
|
|
. = ALIGN(4);
|
|
/* preinit data */
|
|
PROVIDE_HIDDEN (__preinit_array_start = .);
|
|
KEEP(*(.preinit_array))
|
|
PROVIDE_HIDDEN (__preinit_array_end = .);
|
|
|
|
. = ALIGN(4);
|
|
/* init data */
|
|
PROVIDE_HIDDEN (__init_array_start = .);
|
|
KEEP(*(SORT(.init_array.*)))
|
|
KEEP(*(.init_array))
|
|
PROVIDE_HIDDEN (__init_array_end = .);
|
|
|
|
|
|
. = ALIGN(4);
|
|
/* finit data */
|
|
PROVIDE_HIDDEN (__fini_array_start = .);
|
|
KEEP(*(SORT(.fini_array.*)))
|
|
KEEP(*(.fini_array))
|
|
PROVIDE_HIDDEN (__fini_array_end = .);
|
|
|
|
KEEP(*(.jcr*))
|
|
|
|
. = ALIGN(4);
|
|
|
|
/* All data end */
|
|
__data_end__ = .;
|
|
|
|
} > RAM AT > FLASH
|
|
|
|
|
|
/* TrustZone Secure Gateway Stubs Section. */
|
|
.gnu.sgstubs : ALIGN (1024)
|
|
{
|
|
. = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : ALIGN(1024);
|
|
__tz_FLASH_C = DEFINED(FLASH_NSC_START) ? ABSOLUTE(FLASH_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(1024);
|
|
_start_sg = .;
|
|
*(.gnu.sgstubs*)
|
|
. = ALIGN(32);
|
|
_end_sg = .;
|
|
} > FLASH
|
|
|
|
__tz_FLASH_N = DEFINED(FLASH_NS_START) ? ABSOLUTE(FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(FLASH_START + FLASH_LENGTH) : ALIGN(32768);
|
|
|
|
/* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */
|
|
__tz_QSPI_FLASH_S = ORIGIN(QSPI_FLASH);
|
|
|
|
/* QSPI_FLASH section to be downloaded via debugger */
|
|
.qspi_flash :
|
|
{
|
|
__qspi_flash_start__ = .;
|
|
KEEP(*(.qspi_flash*))
|
|
KEEP(*(.code_in_qspi*))
|
|
__qspi_flash_end__ = .;
|
|
} > QSPI_FLASH
|
|
__qspi_flash_code_size__ = __qspi_flash_end__ - __qspi_flash_start__;
|
|
|
|
/* QSPI_FLASH non-retentive section, creates a copy in internal flash that can be copied to QSPI */
|
|
__qspi_flash_code_addr__ = __etext + (__data_end__ - __data_start__);
|
|
.qspi_non_retentive : AT (__qspi_flash_code_addr__)
|
|
{
|
|
__qspi_non_retentive_start__ = .;
|
|
KEEP(*(.qspi_non_retentive*))
|
|
__qspi_non_retentive_end__ = .;
|
|
} > QSPI_FLASH
|
|
__qspi_non_retentive_size__ = __qspi_non_retentive_end__ - __qspi_non_retentive_start__;
|
|
|
|
__qspi_region_max_size__ = 0x4000000; /* Must be the same as defined in MEMORY above */
|
|
__qspi_region_start_address__ = __qspi_flash_start__;
|
|
__qspi_region_end_address__ = __qspi_flash_start__ + __qspi_region_max_size__;
|
|
|
|
/* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */
|
|
__tz_QSPI_FLASH_N = __qspi_non_retentive_end__;
|
|
|
|
/* Note: There are no secure/non-secure boundaries for QSPI. These symbols are provided for the RA configuration tool. */
|
|
__tz_OSPI_DEVICE_0_S = ORIGIN(OSPI_DEVICE_0);
|
|
|
|
/* OSPI_DEVICE_0 section to be downloaded via debugger */
|
|
.OSPI_DEVICE_0 :
|
|
{
|
|
__ospi_device_0_start__ = .;
|
|
KEEP(*(.ospi_device_0*))
|
|
KEEP(*(.code_in_ospi_device_0*))
|
|
__ospi_device_0_end__ = .;
|
|
} > OSPI_DEVICE_0
|
|
__ospi_device_0_code_size__ = __ospi_device_0_end__ - __ospi_device_0_start__;
|
|
|
|
/* OSPI_DEVICE_0 non-retentive section, creates a copy in internal flash that can be copied to OSPI */
|
|
__ospi_device_0_code_addr__ = __etext + (__data_end__ - __data_start__);
|
|
.ospi_device_0_non_retentive : AT (__ospi_device_0_code_addr__)
|
|
{
|
|
__ospi_device_0_non_retentive_start__ = .;
|
|
KEEP(*(.ospi_device_0_non_retentive*))
|
|
__ospi_device_0_non_retentive_end__ = .;
|
|
} > OSPI_DEVICE_0
|
|
__ospi_device_0_non_retentive_size__ = __ospi_device_0_non_retentive_end__ - __ospi_device_0_non_retentive_start__;
|
|
|
|
__ospi_device_0_region_max_size__ = 0x8000000; /* Must be the same as defined in MEMORY above */
|
|
__ospi_device_0_region_start_address__ = __ospi_device_0_start__;
|
|
__ospi_device_0_region_end_address__ = __ospi_device_0_start__ + __ospi_device_0_region_max_size__;
|
|
|
|
/* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */
|
|
__tz_OSPI_DEVICE_0_N = __ospi_device_0_non_retentive_end__;
|
|
|
|
/* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */
|
|
__tz_OSPI_DEVICE_1_S = ORIGIN(OSPI_DEVICE_1);
|
|
|
|
/* OSPI_DEVICE_1 section to be downloaded via debugger */
|
|
.OSPI_DEVICE_1 :
|
|
{
|
|
__ospi_device_1_start__ = .;
|
|
KEEP(*(.ospi_device_1*))
|
|
KEEP(*(.code_in_ospi_device_1*))
|
|
__ospi_device_1_end__ = .;
|
|
} > OSPI_DEVICE_1
|
|
__ospi_device_1_code_size__ = __ospi_device_1_end__ - __ospi_device_1_start__;
|
|
|
|
/* OSPI_DEVICE_1 non-retentive section, creates a copy in internal flash that can be copied to OSPI */
|
|
__ospi_device_1_code_addr__ = __etext + (__data_end__ - __data_start__);
|
|
.ospi_device_1_non_retentive : AT (__ospi_device_1_code_addr__)
|
|
{
|
|
__ospi_device_1_non_retentive_start__ = .;
|
|
KEEP(*(.ospi_device_1_non_retentive*))
|
|
__ospi_device_1_non_retentive_end__ = .;
|
|
} > OSPI_DEVICE_1
|
|
__ospi_device_1_non_retentive_size__ = __ospi_device_1_non_retentive_end__ - __ospi_device_1_non_retentive_start__;
|
|
|
|
__ospi_device_1_region_max_size__ = 0x10000000; /* Must be the same as defined in MEMORY above */
|
|
__ospi_device_1_region_start_address__ = __ospi_device_1_start__;
|
|
__ospi_device_1_region_end_address__ = __ospi_device_1_start__ + __ospi_device_1_region_max_size__;
|
|
|
|
/* Note: There are no secure/non-secure boundaries for OSPI. These symbols are provided for the RA configuration tool. */
|
|
__tz_OSPI_DEVICE_1_N = __ospi_device_1_non_retentive_end__;
|
|
|
|
.noinit (NOLOAD):
|
|
{
|
|
. = ALIGN(4);
|
|
__noinit_start = .;
|
|
KEEP(*(.noinit*))
|
|
. = ALIGN(8);
|
|
/* Place the FreeRTOS heap here so that the __HeapLimit calculation does not include the freertos heap. */
|
|
KEEP(*(.heap.*))
|
|
__noinit_end = .;
|
|
} > RAM
|
|
|
|
.bss :
|
|
{
|
|
. = ALIGN(4);
|
|
__bss_start__ = .;
|
|
*(.bss*)
|
|
*(COMMON)
|
|
. = ALIGN(4);
|
|
__bss_end__ = .;
|
|
} > RAM
|
|
|
|
.heap (NOLOAD):
|
|
{
|
|
. = ALIGN(8);
|
|
__HeapBase = .;
|
|
/* Place the STD heap here. */
|
|
KEEP(*(.heap))
|
|
__HeapLimit = .;
|
|
} > RAM
|
|
|
|
/* Stacks are stored in this section. */
|
|
.stack_dummy (NOLOAD):
|
|
{
|
|
. = ALIGN(8);
|
|
__StackLimit = .;
|
|
/* Main stack */
|
|
KEEP(*(.stack))
|
|
__StackTop = .;
|
|
/* Thread stacks */
|
|
KEEP(*(.stack*))
|
|
__StackTopAll = .;
|
|
} > RAM
|
|
|
|
PROVIDE(__stack = __StackTopAll);
|
|
|
|
/* This symbol represents the end of user allocated RAM. The RAM after this symbol can be used
|
|
at run time for things such as ThreadX memory pool allocations. */
|
|
__RAM_segment_used_end__ = ALIGN(__StackTopAll , 4);
|
|
|
|
/* RAM_NSC_START can be used to set a fixed address for non-secure callable RAM in secure projects.
|
|
* If it is not specified, the address for NSC RAM is the end of RAM aligned to a 1K boundary.
|
|
* In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */
|
|
__tz_RAM_C = DEFINED(RAM_NSC_START) ? ABSOLUTE(RAM_NSC_START) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__RAM_segment_used_end__, 1024);
|
|
|
|
/* RAM_NS_START can be used to set a fixed address for non-secure RAM in secure projects or flat projects.
|
|
* RAM_NS_BUFFER_BLOCK_LENGTH is used to allocate non-secure buffers in a flat project. If it is not
|
|
* specified, the address for NSC RAM is the end of RAM aligned to an 8K boundary.
|
|
* In flat projects that require non-secure RAM, this variable is set to the start of non-secure RAM. */
|
|
__tz_RAM_N = DEFINED(RAM_NS_START) ? ABSOLUTE(RAM_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_BLOCK_START) : ALIGN(__tz_RAM_C, 8192);
|
|
|
|
/* Non-secure buffers must be in non-secure RAM. This is primarily used for the EDMAC in flat projects.
|
|
* The EDMAC is a non-secure bus master and can only access non-secure RAM. */
|
|
.ns_buffer (NOLOAD):
|
|
{
|
|
/* Allocate RAM on a 32-byte boundary to help with placement of Ethernet buffers. */
|
|
. = __RESERVE_NS_RAM ? ABSOLUTE(RAM_NS_BUFFER_START & 0xFFFFFFE0) : .;
|
|
|
|
KEEP(*(.ns_buffer*))
|
|
} > RAM
|
|
|
|
/* Data flash. */
|
|
.data_flash :
|
|
{
|
|
. = ORIGIN(DATA_FLASH);
|
|
__tz_DATA_FLASH_S = .;
|
|
__Data_Flash_Start = .;
|
|
KEEP(*(.data_flash*))
|
|
__Data_Flash_End = .;
|
|
|
|
__tz_DATA_FLASH_N = DEFINED(DATA_FLASH_NS_START) ? ABSOLUTE(DATA_FLASH_NS_START) : __RESERVE_NS_RAM ? ABSOLUTE(DATA_FLASH_START + DATA_FLASH_LENGTH) : ALIGN(1024);
|
|
} > DATA_FLASH
|
|
|
|
/* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */
|
|
__tz_SDRAM_S = ORIGIN(SDRAM);
|
|
|
|
/* SDRAM */
|
|
.sdram (NOLOAD):
|
|
{
|
|
__SDRAM_Start = .;
|
|
KEEP(*(.sdram*))
|
|
KEEP(*(.frame*))
|
|
__SDRAM_End = .;
|
|
} > SDRAM
|
|
|
|
/* Note: There are no secure/non-secure boundaries for SDRAM. These symbols are provided for the RA configuration tool. */
|
|
__tz_SDRAM_N = __SDRAM_End;
|
|
|
|
/* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */
|
|
__tz_ID_CODE_S = ORIGIN(ID_CODE);
|
|
|
|
.id_code :
|
|
{
|
|
__ID_Code_Start = .;
|
|
KEEP(*(.id_code*))
|
|
__ID_Code_End = .;
|
|
} > ID_CODE
|
|
|
|
/* Note: There are no secure/non-secure boundaries for ID_CODE. These symbols are provided for the RA configuration tool. */
|
|
__tz_ID_CODE_N = __ID_Code_End;
|
|
|
|
/* Symbol required for RA Configuration tool. */
|
|
__tz_OPTION_SETTING_S = ORIGIN(OPTION_SETTING);
|
|
|
|
.option_setting :
|
|
{
|
|
__OPTION_SETTING_Start = .;
|
|
KEEP(*(.option_setting_ofs0))
|
|
. = __TZ_S_PROJECT ? __OPTION_SETTING_Start + 0x10 : __OPTION_SETTING_Start;
|
|
KEEP(*(.option_setting_dualsel))
|
|
. = __TZ_S_PROJECT ? __OPTION_SETTING_Start + 0x34 : __OPTION_SETTING_Start;
|
|
KEEP(*(.option_setting_sas))
|
|
__OPTION_SETTING_End = .;
|
|
} > OPTION_SETTING = 0xFF
|
|
|
|
/* Symbol required for RA Configuration tool. */
|
|
__tz_OPTION_SETTING_N = OPTION_SETTING_START_NS;
|
|
|
|
.option_setting_ns :
|
|
{
|
|
__OPTION_SETTING_NS_Start = .;
|
|
KEEP(*(.option_setting_ofs1))
|
|
. = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x10 : __OPTION_SETTING_NS_Start;
|
|
KEEP(*(.option_setting_banksel))
|
|
. = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x40 : __OPTION_SETTING_NS_Start;
|
|
KEEP(*(.option_setting_bps0))
|
|
. = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x44 : __OPTION_SETTING_NS_Start;
|
|
KEEP(*(.option_setting_bps1))
|
|
. = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x48 : __OPTION_SETTING_NS_Start;
|
|
KEEP(*(.option_setting_bps2))
|
|
. = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x60 : __OPTION_SETTING_NS_Start;
|
|
KEEP(*(.option_setting_pbps0))
|
|
. = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x64 : __OPTION_SETTING_NS_Start;
|
|
KEEP(*(.option_setting_pbps1))
|
|
. = __TZ_NS_PROJECT ? __OPTION_SETTING_NS_Start + 0x68 : __OPTION_SETTING_NS_Start;
|
|
KEEP(*(.option_setting_pbps2))
|
|
__OPTION_SETTING_NS_End = .;
|
|
} > OPTION_SETTING = 0xFF
|
|
|
|
/* Symbol required for RA Configuration tool. */
|
|
__tz_OPTION_SETTING_S_S = ORIGIN(OPTION_SETTING_S);
|
|
|
|
.option_setting_s :
|
|
{
|
|
__OPTION_SETTING_S_Start = .;
|
|
KEEP(*(.option_setting_ofs1_sec))
|
|
. = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x10 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_banksel_sec))
|
|
. = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x40 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_bps_sec0))
|
|
. = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x44 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_bps_sec1))
|
|
. = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x48 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_bps_sec2))
|
|
. = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x60 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_pbps_sec0))
|
|
. = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x64 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_pbps_sec1))
|
|
. = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x68 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_pbps_sec2))
|
|
. = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x80 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_ofs1_sel))
|
|
. = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0x90 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_banksel_sel))
|
|
. = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0xC0 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_bps_sel0))
|
|
. = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0xC4 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_bps_sel1))
|
|
. = __TZ_S_PROJECT ? __OPTION_SETTING_S_Start + 0xC8 : __OPTION_SETTING_S_Start;
|
|
KEEP(*(.option_setting_bps_sel2))
|
|
__OPTION_SETTING_S_End = .;
|
|
} > OPTION_SETTING_S = 0xFF
|
|
|
|
/* Symbol required for RA Configuration tool. */
|
|
__tz_OPTION_SETTING_S_N = __OPTION_SETTING_S_End;
|
|
}
|