esp32-s2_dfu/hw/bsp/feather_nrf52840_express/board_feather_nrf52840_express.c

/* 
 * The MIT License (MIT)
 *
 * Copyright (c) 2019 Ha Thach (tinyusb.org)
 *
 * Permission is hereby granted, free of charge, to any person obtaining a copy
 * of this software and associated documentation files (the "Software"), to deal
 * in the Software without restriction, including without limitation the rights
 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
 * copies of the Software, and to permit persons to whom the Software is
 * furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
 * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
 * THE SOFTWARE.
 *
 * This file is part of the TinyUSB stack.
 */

#include "bsp/board.h"

#include "nrfx.h"
#include "nrfx/hal/nrf_gpio.h"
#include "nrfx/drivers/include/nrfx_power.h"
#include "nrfx/drivers/include/nrfx_qspi.h"

#ifdef SOFTDEVICE_PRESENT
#include "nrf_sdm.h"
#include "nrf_soc.h"
#endif

/*------------------------------------------------------------------*/
/* MACRO TYPEDEF CONSTANT ENUM
 *------------------------------------------------------------------*/
#define _PINNUM(port, pin)    ((port)*32 + (pin))

#define LED_PIN         _PINNUM(1, 15)
#define LED_STATE_ON    1

#define BUTTON_PIN      _PINNUM(1, 02)

/*------------------------------------------------------------------*/
/* TUSB HAL MILLISECOND
 *------------------------------------------------------------------*/
#if CFG_TUSB_OS == OPT_OS_NONE
volatile uint32_t system_ticks = 0;

void SysTick_Handler (void)
{
  system_ticks++;
}

uint32_t board_millis(void)
{
  return system_ticks;
}

#endif

/*------------------------------------------------------------------*/
/* BOARD API
 *------------------------------------------------------------------*/

// tinyusb function that handles power event (detected, ready, removed)
// We must call it within SD's SOC event handler, or set it as power event handler if SD is not enabled.
extern void tusb_hal_nrf_power_event(uint32_t event);

void board_init(void)
{
  // Config clock source: XTAL or RC in sdk_config.h
  NRF_CLOCK->LFCLKSRC = (uint32_t)((CLOCK_LFCLKSRC_SRC_Xtal << CLOCK_LFCLKSRC_SRC_Pos) & CLOCK_LFCLKSRC_SRC_Msk);
  NRF_CLOCK->TASKS_LFCLKSTART = 1UL;

  // LED
  nrf_gpio_cfg_output(LED_PIN);
  board_led_write(false);

  // Button
  nrf_gpio_cfg_input(BUTTON_PIN, NRF_GPIO_PIN_PULLUP);

#if CFG_TUSB_OS == OPT_OS_NONE
  // 1ms tick timer
  SysTick_Config(SystemCoreClock/1000);
#endif

  // Priorities 0, 1, 4 (nRF52) are reserved for SoftDevice
  // 2 is highest for application
  NVIC_SetPriority(USBD_IRQn, 2);

  // USB power may already be ready at this time -> no event generated
  // We need to invoke the handler based on the status initially
  uint32_t usb_reg;

#ifdef SOFTDEVICE_PRESENT
  uint8_t sd_en = false;
  sd_softdevice_is_enabled(&sd_en);

  if ( sd_en ) {
    sd_power_usbdetected_enable(true);
    sd_power_usbpwrrdy_enable(true);
    sd_power_usbremoved_enable(true);

    sd_power_usbregstatus_get(&usb_reg);
  }else
#endif
  {
    // Power module init
    const nrfx_power_config_t pwr_cfg = { 0 };
    nrfx_power_init(&pwr_cfg);

    // Register tusb function as USB power handler
    const nrfx_power_usbevt_config_t config = { .handler = (nrfx_power_usb_event_handler_t) tusb_hal_nrf_power_event };
    nrfx_power_usbevt_init(&config);

    nrfx_power_usbevt_enable();

    usb_reg = NRF_POWER->USBREGSTATUS;
  }

  if ( usb_reg & POWER_USBREGSTATUS_VBUSDETECT_Msk ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_DETECTED);
  if ( usb_reg & POWER_USBREGSTATUS_OUTPUTRDY_Msk  ) tusb_hal_nrf_power_event(NRFX_POWER_USB_EVT_READY);
}

void board_led_write(bool state)
{
  nrf_gpio_pin_write(LED_PIN, state ? LED_STATE_ON : (1-LED_STATE_ON));
}

uint32_t board_button_read(void)
{
  // button is active LOW
  return (nrf_gpio_pin_read(BUTTON_PIN) ? 0 : 1);
}

int board_uart_read(uint8_t* buf, int len)
{
  (void) buf;
  (void) len;
  return 0;
}

int board_uart_write(void const * buf, int len)
{
  (void) buf;
  (void) len;
  return 0;
}

#ifdef SOFTDEVICE_PRESENT
// process SOC event from SD
uint32_t proc_soc(void)
{
  uint32_t soc_evt;
  uint32_t err = sd_evt_get(&soc_evt);

  if (NRF_SUCCESS == err)
  {
    /*------------- usb power event handler -------------*/
    int32_t usbevt = (soc_evt == NRF_EVT_POWER_USB_DETECTED   ) ? NRFX_POWER_USB_EVT_DETECTED:
                     (soc_evt == NRF_EVT_POWER_USB_POWER_READY) ? NRFX_POWER_USB_EVT_READY   :
                     (soc_evt == NRF_EVT_POWER_USB_REMOVED    ) ? NRFX_POWER_USB_EVT_REMOVED : -1;

    if ( usbevt >= 0) tusb_hal_nrf_power_event(usbevt);
  }

  return err;
}

uint32_t proc_ble(void)
{
  // do nothing with ble
  return NRF_ERROR_NOT_FOUND;
}

void SD_EVT_IRQHandler(void)
{
  // process BLE and SOC until there is no more events
  while( (NRF_ERROR_NOT_FOUND != proc_ble()) || (NRF_ERROR_NOT_FOUND != proc_soc()) )
  {

  }
}

void nrf_error_cb(uint32_t id, uint32_t pc, uint32_t info)
{
  (void) id;
  (void) pc;
  (void) info;
}
#endif