216 lines
5.6 KiB
C
216 lines
5.6 KiB
C
/* Auto-generated config file hpl_usart_config.h */
|
|
#ifndef HPL_USART_CONFIG_H
|
|
#define HPL_USART_CONFIG_H
|
|
|
|
// <<< Use Configuration Wizard in Context Menu >>>
|
|
|
|
#include <peripheral_clk_config.h>
|
|
|
|
#ifndef CONF_USART_7_ENABLE
|
|
#define CONF_USART_7_ENABLE 1
|
|
#endif
|
|
|
|
// <h> Basic Configuration
|
|
|
|
// <o> Frame parity
|
|
// <0x0=>Even parity
|
|
// <0x1=>Odd parity
|
|
// <0x2=>Parity forced to 0
|
|
// <0x3=>Parity forced to 1
|
|
// <0x4=>No parity
|
|
// <i> Parity bit mode for USART frame
|
|
// <id> usart_parity
|
|
#ifndef CONF_USART_7_PARITY
|
|
#define CONF_USART_7_PARITY 0x4
|
|
#endif
|
|
|
|
// <o> Character Size
|
|
// <0x0=>5 bits
|
|
// <0x1=>6 bits
|
|
// <0x2=>7 bits
|
|
// <0x3=>8 bits
|
|
// <i> Data character size in USART frame
|
|
// <id> usart_character_size
|
|
#ifndef CONF_USART_7_CHSIZE
|
|
#define CONF_USART_7_CHSIZE 0x3
|
|
#endif
|
|
|
|
// <o> Stop Bit
|
|
// <0=>1 stop bit
|
|
// <1=>1.5 stop bits
|
|
// <2=>2 stop bits
|
|
// <i> Number of stop bits in USART frame
|
|
// <id> usart_stop_bit
|
|
#ifndef CONF_USART_7_SBMODE
|
|
#define CONF_USART_7_SBMODE 0
|
|
#endif
|
|
|
|
// <o> Clock Output Select
|
|
// <0=>The USART does not drive the SCK pin
|
|
// <1=>The USART drives the SCK pin if USCLKS does not select the external clock SCK
|
|
// <i> Clock Output Select in USART sck, if in usrt master mode, please drive SCK.
|
|
// <id> usart_clock_output_select
|
|
#ifndef CONF_USART_7_CLKO
|
|
#define CONF_USART_7_CLKO 0
|
|
#endif
|
|
|
|
// <o> Baud rate <1-3000000>
|
|
// <i> USART baud rate setting
|
|
// <id> usart_baud_rate
|
|
#ifndef CONF_USART_7_BAUD
|
|
#define CONF_USART_7_BAUD 9600
|
|
#endif
|
|
|
|
// </h>
|
|
|
|
// <e> Advanced configuration
|
|
// <id> usart_advanced
|
|
#ifndef CONF_USART_7_ADVANCED_CONFIG
|
|
#define CONF_USART_7_ADVANCED_CONFIG 0
|
|
#endif
|
|
|
|
// <o> Channel Mode
|
|
// <0=>Normal Mode
|
|
// <1=>Automatic Echo
|
|
// <2=>Local Loopback
|
|
// <3=>Remote Loopback
|
|
// <i> Channel mode in USART frame
|
|
// <id> usart_channel_mode
|
|
#ifndef CONF_USART_7_CHMODE
|
|
#define CONF_USART_7_CHMODE 0
|
|
#endif
|
|
|
|
// <q> 9 bits character enable
|
|
// <i> Enable 9 bits character, this has high priority than 5/6/7/8 bits.
|
|
// <id> usart_9bits_enable
|
|
#ifndef CONF_USART_7_MODE9
|
|
#define CONF_USART_7_MODE9 0
|
|
#endif
|
|
|
|
// <o> Variable Sync
|
|
// <0=>User defined configuration
|
|
// <1=>sync field is updated when a character is written into US_THR
|
|
// <i> Variable Synchronization of Command/Data Sync Start Frarm Delimiter
|
|
// <id> variable_sync
|
|
#ifndef CONF_USART_7_VAR_SYNC
|
|
#define CONF_USART_7_VAR_SYNC 0
|
|
#endif
|
|
|
|
// <o> Oversampling Mode
|
|
// <0=>16 Oversampling
|
|
// <1=>8 Oversampling
|
|
// <i> Oversampling Mode in UART mode
|
|
// <id> usart__oversampling_mode
|
|
#ifndef CONF_USART_7_OVER
|
|
#define CONF_USART_7_OVER 0
|
|
#endif
|
|
|
|
// <o> Inhibit Non Ack
|
|
// <0=>The NACK is generated
|
|
// <1=>The NACK is not generated
|
|
// <i> Inhibit Non Acknowledge
|
|
// <id> usart__inack
|
|
#ifndef CONF_USART_7_INACK
|
|
#define CONF_USART_7_INACK 1
|
|
#endif
|
|
|
|
// <o> Disable Successive NACK
|
|
// <0=>NACK is sent on the ISO line as soon as a parity error occurs
|
|
// <1=>Many parity errors generate a NACK on the ISO line
|
|
// <i> Disable Successive NACK
|
|
// <id> usart_dsnack
|
|
#ifndef CONF_USART_7_DSNACK
|
|
#define CONF_USART_7_DSNACK 0
|
|
#endif
|
|
|
|
// <o> Inverted Data
|
|
// <0=>Data isn't inverted, nomal mode
|
|
// <1=>Data is inverted
|
|
// <i> Inverted Data
|
|
// <id> usart_invdata
|
|
#ifndef CONF_USART_7_INVDATA
|
|
#define CONF_USART_7_INVDATA 0
|
|
#endif
|
|
|
|
// <o> Maximum Number of Automatic Iteration <0-7>
|
|
// <i> Defines the maximum number of iterations in mode ISO7816, protocol T = 0.
|
|
// <id> usart_max_iteration
|
|
#ifndef CONF_USART_7_MAX_ITERATION
|
|
#define CONF_USART_7_MAX_ITERATION 0
|
|
#endif
|
|
|
|
// <q> Receive Line Filter enable
|
|
// <i> whether the USART filters the receive line using a three-sample filter
|
|
// <id> usart_receive_filter_enable
|
|
#ifndef CONF_USART_7_FILTER
|
|
#define CONF_USART_7_FILTER 0
|
|
#endif
|
|
|
|
// <q> Manchester Encoder/Decoder Enable
|
|
// <i> whether the USART Manchester Encoder/Decoder
|
|
// <id> usart_manchester_filter_enable
|
|
#ifndef CONF_USART_7_MAN
|
|
#define CONF_USART_7_MAN 0
|
|
#endif
|
|
|
|
// <o> Manchester Synchronization Mode
|
|
// <0=>The Manchester start bit is a 0 to 1 transition
|
|
// <1=>The Manchester start bit is a 1 to 0 transition
|
|
// <i> Manchester Synchronization Mode
|
|
// <id> usart_manchester_synchronization_mode
|
|
#ifndef CONF_USART_7_MODSYNC
|
|
#define CONF_USART_7_MODSYNC 0
|
|
#endif
|
|
|
|
// <o> Start Frame Delimiter Selector
|
|
// <0=>Start frame delimiter is COMMAND or DATA SYNC
|
|
// <1=>Start frame delimiter is one bit
|
|
// <i> Start Frame Delimiter Selector
|
|
// <id> usart_start_frame_delimiter
|
|
#ifndef CONF_USART_7_ONEBIT
|
|
#define CONF_USART_7_ONEBIT 0
|
|
#endif
|
|
|
|
// <o> Fractional Part <0-7>
|
|
// <i> Fractional part of the baud rate if baud rate generator is in fractional mode
|
|
// <id> usart_arch_fractional
|
|
#ifndef CONF_USART_7_FRACTIONAL
|
|
#define CONF_USART_7_FRACTIONAL 0x0
|
|
#endif
|
|
|
|
// <o> Data Order
|
|
// <0=>LSB is transmitted first
|
|
// <1=>MSB is transmitted first
|
|
// <i> Data order of the data bits in the frame
|
|
// <id> usart_arch_msbf
|
|
#ifndef CONF_USART_7_MSBF
|
|
#define CONF_USART_7_MSBF 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
#define CONF_USART_7_MODE 0x0
|
|
|
|
// Calculate BAUD register value in UART mode
|
|
#if CONF_FLEXCOM7_CK_SRC < 3
|
|
#ifndef CONF_USART_7_BAUD_CD
|
|
#define CONF_USART_7_BAUD_CD ((CONF_FLEXCOM7_FREQUENCY) / CONF_USART_7_BAUD / 8 / (2 - CONF_USART_7_OVER))
|
|
#endif
|
|
#ifndef CONF_USART_7_BAUD_FP
|
|
#define CONF_USART_7_BAUD_FP \
|
|
((CONF_FLEXCOM7_FREQUENCY) / CONF_USART_7_BAUD / (2 - CONF_USART_7_OVER) - 8 * CONF_USART_7_BAUD_CD)
|
|
#endif
|
|
#elif CONF_FLEXCOM7_CK_SRC == 3
|
|
// No division is active. The value written in US_BRGR has no effect.
|
|
#ifndef CONF_USART_7_BAUD_CD
|
|
#define CONF_USART_7_BAUD_CD 1
|
|
#endif
|
|
#ifndef CONF_USART_7_BAUD_FP
|
|
#define CONF_USART_7_BAUD_FP 1
|
|
#endif
|
|
#endif
|
|
|
|
// <<< end of configuration section >>>
|
|
|
|
#endif // HPL_USART_CONFIG_H
|