c14c0cfc9f
support class drivers implemented by application
2020-04-29 10:49:58 +07:00
fcdb22b2f9
fix typo
2020-04-28 10:53:43 +07:00
958b5510cb
added comment for hw clearing TXFE
2020-04-27 13:17:47 +07:00
e785b09118
TXFE is read only bit
2020-04-27 12:06:14 +07:00
d0487088ac
revert a change to net driver
2020-04-26 23:04:17 +07:00
00fcf829a1
sync synopsis fix for esp32s2
2020-04-26 22:41:04 +07:00
8d18d6077b
turn off TX FIFO Empty for EPIN if all bytes are written
...
fix dcd synopsys issue with usbnet #289
2020-04-26 22:14:59 +07:00
83353dd93f
add TODO for usbnet clean up
2020-04-26 22:03:05 +07:00
a1c599f4b6
clean up log message
2020-04-26 22:02:49 +07:00
9c8517a8d2
fix missing debug log macros
2020-04-26 14:58:23 +07:00
017c95037f
add usbd edpt open
...
- RTT mode is blocking to prevent log lost
- Improve logging message
2020-04-26 14:51:44 +07:00
b949ae596f
synopsys: Reduce interrupt time for IN ZLP
...
For IN endpoints output FIFO is filled in interrupt, therefor before
endpoint is enabled, DIEPTSIZ is set with correct size of packet.
Then endpoint is enabled and FIFO empty interrupt is enabled.
This works fine except for the ZLP. Enabling FIFO empty interrupt
results in interrupt handler being called all the time because
there is nothing to put in the FIFO.
Eventually it ends when IN token is received and empty
packed is transmitted out.
This change does not enable FIFO empty interrupt for ZLP reducing
CPU load.
2020-04-24 17:38:30 +02:00
c59fa77427
Revert "Merge pull request #359 from versioduo/midi-flow-control"
...
This reverts commit 1d33aa9b6f718db7e536
2020-04-23 23:25:20 +07:00
f8bb4c86ef
Merge pull request #376 from hathach/add-more-example
...
Add dynamic configuration example
2020-04-23 14:50:27 +07:00
c39dc03331
Merge pull request #374 from duempel/stm32f1_synopsys_support
...
Added support for STM32F1 Connectivity Line MCU
2020-04-23 13:38:48 +07:00
10e035241f
house keeping
2020-04-22 23:04:21 +07:00
551724498a
Added support for STM32F1 Connectivity Line MCU
...
STM32F105 and STM32F107 are using the Synopsys IP
2020-04-22 17:39:53 +02:00
7acdcc2ebc
Merge branch 'master' into add-more-example
2020-04-22 19:50:23 +07:00
1fc7f54a8a
added swo as logger
...
tested with feather nrf52840 + jlink
2020-04-22 19:18:03 +07:00
3aa3c35986
Merge branch 'master' into add-rtt
2020-04-22 13:45:20 +07:00
379b8ac556
Merge pull request #365 from pigrew/desc_tu_verify
...
tu_verify for getting descriptors
2020-04-22 12:24:05 +07:00
3b83813f01
clean up
2020-04-22 00:29:51 +07:00
1d33aa9b6f
Merge pull request #359 from versioduo/midi-flow-control
...
MIDI - Add flow control to incoming packet stream
2020-04-22 00:11:27 +07:00
0ec69de77c
sof is optional, revert other changes but remove unneeded check.
2020-04-21 10:06:17 -04:00
d1656c0b8d
tu_verify for getting descriptors
2020-04-20 16:09:15 -04:00
bbcf9241bd
add back MIDI multiple jack
2020-04-20 23:46:17 +07:00
d57312602d
add extra comma to HID_REPORT_ID
...
this make the template with Report ID look less weird to the user
2020-04-20 16:09:17 +07:00
e4570c35f7
add uart for ea4357
2020-04-20 00:27:35 +07:00
a0598ef369
MIDI - Add flow control to incoming packet stream
...
Larger SysEx transfers get corrupted by incoming packets.
This changes the FIFOs not to overwrite their data. MIDI should not be
a transport that drops packets. A potentially blocking device is easier
to detect and handle than a device that silently corrupts the packet
stream at random overflows, especially when SysEx messages are involved.
2020-04-19 11:44:15 +02:00
f9262007ac
Merge pull request #258 from versioduo/midi-packets
...
MIDI packet interface
2020-04-19 15:43:07 +07:00
1f442c0a9a
also add wakeup event
2020-04-18 23:48:36 +07:00
c3fc5f1595
session end interrupt doesn't trigger on esp32 saola board
...
it is possibly due to the board design without vbus sense. Revisit
later.
2020-04-18 23:42:51 +07:00
fa71402e17
implement disconnection detection for stm32 synopsys
...
- disconnection is OTG INT session end bit
- add USE_SOF to disable 1ms interrupt on mcu which isn't used now by
the stack
- add suspend detection
2020-04-18 23:40:27 +07:00
ce6a81e74d
fix typo
2020-04-17 22:10:31 +07:00
464b1e8e89
correct return for write flush
2020-04-17 15:57:24 +07:00
4571ce0d29
add a bit of document for cdc device API. also improve cdc write flush when complete.
2020-04-17 15:54:20 +07:00
0b1b9a2b9e
Merge pull request #260 from majbthrd/cdczlp
...
CDC device: fix behavior for transfers that are a whole multiple of endpoint buffer
2020-04-17 15:00:12 +07:00
6f9c256ad0
complete remove dcd_set_config(), fix unit test
2020-04-17 13:52:34 +07:00
05476d9ad7
Merge branch 'master' into remove-dcd-set-config
2020-04-17 13:38:22 +07:00
85f0894fff
Merge pull request #347 from majbthrd/nuc505_config
...
nuc505: change dcd_set_config() behavior
2020-04-17 13:36:16 +07:00
1f69807621
Merge pull request #354 from hathach/cxd56-disconnect-connect
...
Cxd56 disconnect connect
2020-04-17 13:12:47 +07:00
dddf30f532
added disconnect for spresense
2020-04-17 12:53:42 +07:00
50be9d7c3a
mass rename tud/dcd_irq_handler to tud/dcd_init_handler
2020-04-17 12:27:53 +07:00
89f99426fc
add code for disconnect/connect (not tested)
2020-04-17 11:48:49 +07:00
4bbbba48cb
Merge pull request #351 from hathach/valentyusb-dcd-disconnect-connect
...
Valentyusb dcd disconnect connect
2020-04-17 09:52:29 +07:00
19e2eb66c0
Merge pull request #350 from hathach/synopsys-msp430-dcd-disconnect-connect
...
Synopsys msp430 dcd disconnect connect
2020-04-17 09:51:15 +07:00
9aa553ccc2
Merge pull request #352 from hathach/samg-dcd-disconnect-connect
...
samg implement dcd connect/disconnect
2020-04-16 23:14:42 +07:00
33610751d7
Merge pull request #336 from pigrew/edpt_close
...
> If you notice my chain of events above, the bulk transfer was started BEFORE the SET_INTERFACE call. The USB device hardware swaps the order of them being delivered. On STM32, it gives priority to the lower-numbered EP index.
It shouldn't be a matter, control is 2+ stage, before sending the setup. Host should stop all communication to the endpoint that It wants to close.
2020-04-16 23:10:36 +07:00
36d4efa077
samg implement dcd connect/disconnect
2020-04-16 22:59:19 +07:00
6377699d77
implement dcd disconnect connect
2020-04-16 22:30:33 +07:00
hathach