5f8f046eaa
refractor remove tusbh_msc_is_failed
...
increase usbh enum task from 150 to 200 due to stack overflow when mounting msc device
added task for msc host freeRTOS with stack = 300 (still cannot execute copy command)
2014-02-28 18:42:33 +07:00
da6b2fbef8
EHCI: immediately reset port when device connected. This proves to help prevent duplication connection event (also with OHCI)
...
increase delay after reset to 100 ms (NXP's EHCI does not work with 50ms)
--> fix all duplication connection with OHCI & EHCI
2014-02-28 17:08:47 +07:00
4b6c6929cb
fix the duplicated plug connection status change with lpc17xx by using immediate reset on isr. However Khanh's G5 mouse is not enumerated !!
...
remove TUSB_CFG_CONFIGURATION_MAX from config file
fix some warning
2014-02-20 16:06:31 +07:00
533c8d2eed
use hcd_pipe_is_busy instead of hcd_pipe_is_idle
...
remove hcd_pipe_is_idle
2014-02-20 10:41:31 +07:00
d86523b16c
re-enable blocking waiting in ehci controller reset (otherwise it wont works)
2014-02-19 15:50:39 +07:00
d020c2f609
remove immediately reset when device plug.
...
check to make sure device is still plug after initial delay (200ms) before reset
remove blocking waiting when reset in ehci.c
2013-12-19 13:55:22 +07:00
cfcef0558a
fix plug & unplug issue by reseting port immediately instead of waiting for usbh enumeration task to do so
2013-12-19 12:43:22 +07:00
2715650751
refractor ohci.c
2013-12-19 12:11:13 +07:00
cc736fd45e
able to run ohci hid mouse demo
...
- an old mouse cause double plug event
- an old mouse failed to response the first get 8 byte device descriptor
2013-12-19 11:59:19 +07:00
b828aabbe4
implement hcd_pipe_close, able to plug & unplug device from ohci lpc17xx
2013-12-18 16:23:09 +07:00
eaacbd4a36
able to run MSC host demo on lpc17xx
...
implement walk around for halted ED in OHCI
2013-12-18 14:57:34 +07:00
915296013e
add in hcd_pipe_open & hcd_pipe_xfer
2013-12-17 11:26:39 +07:00
75ffc0bfec
implement ohci
...
- hcd_port_reset
- hcd_port_connect_status
- hcd_port_speed_get
- hcd_pipe_control_open
- hcd_pipe_control_xfer
- done_queue_isr for control xfer
able to go through enumeration with MSC device
2013-12-16 12:35:05 +07:00
30c8f68930
able to get connect status change interrupt occured
2013-12-13 12:26:37 +07:00
4d14e2ac50
add structure & define for ohci
2013-12-11 14:31:27 +07:00
a5ba283557
change MCU to TUSB_CFG_MCU
2013-11-25 12:48:27 +07:00
83f1d660ce
clean up
...
add some doxygen work
finalize device disconnection & suspend
- suspend & resume & remote wake up is not supported yet
2013-11-22 15:16:24 +07:00
05c439e45a
refractor usbd, first step to make get configuration as sub task
2013-11-15 13:26:12 +07:00
fc68439b74
add usbd_task to handle event task eg setup received
2013-11-15 12:30:22 +07:00
b2b53e61fb
refractor dcd_controller_reset & hcd_controller_reset to hal_controller_reset
2013-11-06 12:15:11 +07:00
3a54ad4c0d
implement msc device class
...
usbd auto stall control for not supported return from class control request
usbd implement xfer isr callback mechanism
DCD
- implement dcd multiple qtd support
- dcd dcd_pipe_stall
- implement dcd_pipe_queue_xfer
- xfer_complete_isr
- flush control endpoint if received new setup while previous transfer is not complete
change msc_cmd_block_wrapper_t flags field to dir
force full speed for easy testing
NOTEs: somehow unable to get endpoint IN interrupt with ioc
2013-11-01 12:11:26 +07:00
357813f171
implementing sw device stack
2013-10-29 11:27:25 +07:00
318a058d3c
static assert to check OSAL_QUEUE_DEF's queue_depth parameter < 256
...
enable HOST_HCD_XFER_INTERRUPT by default (previously only enabled with HID), as it is widely used
implement tusbh_cdc_is_busy
add compilation switch in usbh enumeration for hub
rewrite CDC serial application to address usb-serial race condition
2013-10-27 19:34:36 +07:00
df8d56f485
more document
2013-10-26 20:14:12 +07:00
5f23653c69
more doxygen work
2013-10-25 13:45:57 +07:00
b1142ff065
document hub
2013-10-24 17:00:04 +07:00
b71ffe3d5a
change TUSB_CFG_CONTROLLER0/1_MODE to TUSB_CFG_CONTROLLER_0/1_MODE for clearance
...
adding configuration docs for tinyusb_config.h
document HID mouse & keyboard API
2013-10-24 15:32:54 +07:00
de7e21dc66
refractor hub api
...
fix all test build errors
2013-10-16 11:05:33 +07:00
6f9172c15f
clean up warnings here and there
2013-10-02 14:20:05 +07:00
5c8389b9ae
update freertos project
...
temp hack to fix problem with no TD on status endpoint of hub in case of error
2013-10-02 11:01:28 +07:00
640b0ec546
- move disconnection handle to enum task --> move tusbh_xxx_unmount is invoked in non-isr context
2013-10-01 13:53:54 +07:00
7f4a3fc829
ignore multiple level of hub
2013-10-01 13:23:31 +07:00
71b2859fe5
handle unplug the hub itself
2013-10-01 13:09:52 +07:00
4da3b03430
refractor hub
2013-10-01 12:12:35 +07:00
14ebd6c4d9
refractor hub
2013-10-01 11:29:25 +07:00
93821c55ce
hack ehci advance async to handle disconnect via hub
2013-09-30 18:40:20 +07:00
5eebec61f1
refractor hub
2013-09-30 17:14:44 +07:00
0f05d27ac9
refractor hub
2013-09-30 16:59:41 +07:00
9ecaec67b3
refractor hub
2013-09-30 16:40:02 +07:00
5fb22e3f34
refractor hub
2013-09-30 16:13:08 +07:00
821f85cb20
refractor hub
2013-09-30 15:34:22 +07:00
3cc169f2fd
able to mount one device on the hub
2013-09-30 15:16:23 +07:00
cb600ed988
clean up hid host (temp let test failed)
2013-09-28 01:01:44 +07:00
eb1a101667
house keeping
2013-09-27 22:38:23 +07:00
bbfa85aa08
allow a limited model to deal with stalled pipe/transaction
...
added stall clear & able to mount the stupid toshiba thumb drive
add HCD pipe API
- bool hcd_pipe_is_busy(pipe_handle_t pipe_hdl);
- bool hcd_pipe_is_stalled(pipe_handle_t pipe_hdl);
- uint8_t hcd_pipe_get_endpoint_addr(pipe_handle_t pipe_hdl);
- tusb_error_t hcd_pipe_clear_stall(pipe_handle_t pipe_hdl);
remove tusbh_device_mount_failed_cb (not neccessary for user)
2013-09-24 18:23:34 +07:00
63b776f7cf
add some tests support for msc host
...
refractor msch buffer for getting inital scsi like inquiry, read capacity
adding support for resovling stall on control pipe
2013-09-24 15:21:16 +07:00
85f3ad9d3b
refractor hcd API to allow queue xfer without actually transferring data
2013-09-23 00:24:51 +07:00
a8a10e8650
added read capacity 10 with hacking code
2013-09-22 23:54:44 +07:00
cc91a73cdc
fix pingstate for highspeed bulk out transfer
...
temp implementation of msc host --> can issue inquiry command
2013-09-22 18:44:55 +07:00
5708863859
house keeping, clean up warnings
2013-09-21 14:38:40 +07:00
hathach