7187cd9a85
fix ci, remove use of CFG_TUSB_RHPORT0_MODE in bsp
2022-06-06 12:51:10 +07:00
83dc3e25f0
more work to abstract chipidea driver
2021-12-01 23:30:09 +07:00
31cd366935
more -Wcast-qual
2021-10-17 17:32:03 +07:00
e115e08728
add nxp_lpcopen as submodule
2021-04-28 18:11:49 +07:00
253430a765
add example specific DEPS_SUBMODULES
2021-03-18 16:28:44 +07:00
ed8f117dd1
explicitly add dcd source file without vendor/family
2021-03-17 16:52:07 +07:00
590d8d4d5c
rename FAMILY_SUBMODULES to DEPS_SUBMODULES
2021-03-04 22:53:02 +07:00
b846ded487
merge no-family example build
...
specify FAMILY_SUBMODULES for all boards
2021-03-04 22:50:45 +07:00
1dbbfdfe45
clean up
2021-02-24 12:34:23 +07:00
4ecedc70c8
fix vector assign
2020-09-03 23:48:56 +07:00
1d83ad0ebb
rename tuh_isr/hcd_isr to tuh_int_handler/hcd_int_handler
2020-09-03 13:12:25 +07:00
1cee2da7b9
revert to use __USE_LPCOPEN
...
properly init fpu on LPC M4
2020-09-03 12:58:09 +07:00
52b5748e8d
fix ci build
2020-09-02 00:56:43 +07:00
c492aef4c7
revert to use float-abi
...
define __USE_CMSIS instead of __USE_LPCOPEN will have startup enable FPU
on startup properly. Although it is only relevant to lpx43/40 series,
change all to __USE_CMSIS for consistency
2020-09-02 00:46:08 +07:00
84425c50b3
add more logging to host stack
...
tested host with lpc4357, don't use fpu with lpc m4 since it seems to
cause hardfault (stack does not make use of fpu anyway).
2020-09-01 19:16:50 +07:00
50be9d7c3a
mass rename tud/dcd_irq_handler to tud/dcd_init_handler
2020-04-17 12:27:53 +07:00
dc4bf02dcb
mass rename tud_isr to tud_irq_handler
2020-04-06 17:04:49 +07:00
ba74223c2e
fix more build
2020-03-11 00:58:28 +07:00
487b887f80
freertos demo use static only for most optmized sram
2020-03-11 00:09:37 +07:00
a02e723d09
rename dcd lpc18_43 to transdimension
2019-11-22 14:54:23 +07:00
a0b2561a2d
move nxp dcd ehci controller reset and modde into dcd
...
rt1064 work with cdc msc example
2019-11-22 14:20:10 +07:00
f5d737aa7e
moving irq to bsp for lpc17/40
2019-11-21 23:19:38 +07:00
bbec47b647
adding tud_isr/tuh_isr with lpc18/43
2019-11-21 22:20:30 +07:00
f638594536
move -flto to board.mk
...
current board that doesn work with flto is spresense and mimxrt10xx (due
to xip image_vector_table is optimized out).
2019-11-20 16:06:40 +07:00
cd96b3de86
update makefile for lpc boards
2019-11-11 11:51:51 +07:00
1684cb06b7
update makefile for lpc mcu
2019-11-11 11:24:10 +07:00
6f952a8e84
fix missing board uart read/write()
2019-10-24 12:20:06 +07:00
195d0f5a14
adding log support with uart
...
started with pca10056
2019-10-12 00:02:51 +07:00
6183dbd0ce
add -Wextra for more warnings to example
...
non-stack warning (probably mcu driver) should be suppressed in the
board.mk
2019-09-27 00:15:43 +07:00
b9b9f67698
ngx4330 usb0 work well
2019-09-09 17:30:43 +07:00
3497dd0264
adding ngx4330
2019-09-09 16:47:57 +07:00
hathach