fdd1e4fbf0
more usbd clean up
2021-10-01 21:52:29 +07:00
0b31c40b9f
Merge branch 'master' into enhance
2021-09-29 16:18:17 +07:00
c62c1433e7
usbd: Workaround for non standard device descriptor request
...
Windows and Linux host during enumeration requests device
descriptor with request size set to 64 bytes when device
was in default state (no address).
Those systems do not want 64 bytes though since usb descriptors is
only 18 bytes long so they silently expect that only one packet
will be received possibly 18 bytes for EPS > 16 or 8 or 16 bytes
for smaller EP0.
For devices with CFG_TUD_ENDPOINT0_SIZE size 8 or 16 there was
workaround that reduced request size to CFG_TUD_ENDPOINT0_SIZE
and that was enough to satisfy Windows and Linux hosts.
However USBCV testing application also requests device descriptor
but with size set to 18 bytes. Workaround for Window/Linux
prevented USBVC to tests devices with 8 bytes EP0 size since it
send only 8 bytes while application did wanted 18 bytes.
Solution that satisfies both cases it to check if in default state device
descriptor request wants more bytes than descriptor size (18).
If so host is expecting to receive less bytes then requested
and workaround would be applied since Linux/Windows only try
to read one packet.
If 18 bytes was requested as is the case for USBCV, core returns
descriptor in 2 or 3 packets as application expects.
2021-09-24 14:19:04 +02:00
0ded1c5bac
Reset EP flags on close.
2021-09-14 21:08:12 +02:00
a23944035d
correct assoc_itf_count for bth driver
2021-09-15 00:51:01 +07:00
b474522245
make vendor driver more flexible
...
- skip additional custom descriptor between interface and endpoints
- can have up to 2 bulk endpoint ( 1 in & 1 out)
2021-09-14 21:30:38 +07:00
25ea8f9c9e
update configuration parser
2021-09-14 21:02:38 +07:00
3639168066
Fix warning.
2021-09-14 11:58:22 +02:00
5404d6d8ae
usbd pre-compute total interface length without replying on driver open
2021-09-14 12:47:20 +07:00
27800f7e4f
remove connected check for DCD_EVENT_UNPLUGGED since previous bus reset can clear this
...
implement unplugged detection for trans dimension dcd
2021-09-09 16:01:05 +07:00
f81368174b
add other speed descriptor callback tud_descriptor_other_speed_configuration_cb()
...
example implement tud_descriptor_device_qualifier_cb() and
tud_descriptor_other_speed_configuration_cb() on high speed device to
fully compliant to usbcv
2021-09-09 15:17:19 +07:00
d4c56c70a8
minor clean up
2021-09-01 20:01:40 +07:00
1398226bb5
only attempt to clear if stalled, and stall if cleared
2021-09-01 16:54:03 +07:00
90dc9bc289
revert previous changes, edpt stall also clear any pending (not complete) transfer
2021-09-01 12:42:45 +07:00
d047b28aa2
remove set/clear busy flag in set/clear stall since they are different status
...
note: dcd should resume to prio-stalled queued transfer when unstall
2021-08-31 17:39:54 +07:00
9394de6ae7
update msc driver to pass MSC BOT error recovery compliant test
2021-08-27 12:38:41 +07:00
71e77e47fa
add dcd_edpt_close_all() for clear existing configured state
...
correctly responded to TD 9.13 Set Configuration Test
2021-08-26 17:07:03 +07:00
07adc26ce3
fix usbcv TD 9.4 Interface Descriptor test
2021-08-26 13:07:10 +07:00
beb1a5c678
minor clean up
2021-08-20 19:39:33 +07:00
1cef2b6a42
extra common edpt helper for device and host stack
...
tu_edpt_validate() and tu_edpt_bind_driver()
2021-08-20 18:01:10 +07:00
830757d9ce
Merge pull request #1020 from hathach/rp2040-disconnect-suspend
...
Add Rp2040 suspend & resume support
2021-08-18 16:45:35 +07:00
9b869463dd
skipped suspend/resume if not connected
2021-08-17 17:00:53 +07:00
ab2eec77d4
complete suspend, resume, remote wakeup for nrf52
2021-08-16 20:22:14 +07:00
d52b981c3a
revert ready() check in claim (do it later in separated PR)
2021-08-12 17:07:39 +07:00
17ef9f4843
add ready check for edpt claim
2021-08-12 15:54:04 +07:00
8cd23489d5
update endian
2021-07-22 17:49:39 +07:00
b35ad6edcb
clean up max packet size endian
2021-07-22 17:04:55 +07:00
fa0936bf58
Merge branch 'CCRX_Port' of https://github.com/Wini-Buh/tinyusb into Wini-Buh-CCRX_Port
2021-07-22 16:48:18 +07:00
1c2bc47c07
Merge pull request #950 from HiFiPhile/dfu
...
DFU improvements
2021-07-22 11:17:01 +07:00
37cac414f8
fix ci
2021-07-22 00:12:01 +07:00
a226dbaa4d
add dcd_attr for DCD_ATTR_ENDPOINT_MAX
...
could be useful with more dcd specific attribute
2021-07-22 00:12:01 +07:00
3960beece0
rename CFG_TUD_DFU_MODE to simply CFG_TUD_DFU
2021-07-15 20:52:58 +07:00
daca9e520b
wrap up DFU update
2021-07-15 20:47:50 +07:00
ca98996e1f
better support for hid device set/get protocol
...
add caplock detection for hid_composite
2021-07-01 22:46:39 +07:00
cb0f1d98db
Merge remote-tracking branch 'origin/master' into CCRX_Port
...
# Conflicts:
# src/portable/renesas/usba/dcd_usba.c
# src/tusb_option.h
2021-06-29 00:19:30 +02:00
51c6444e1d
final clean up
2021-06-22 23:49:24 +02:00
832d22d7ad
force single buffered for device mode, out endpoint
2021-06-17 01:55:35 +07:00
60d8ecbfe6
clean up
2021-06-11 22:36:17 +02:00
1c23462b43
weak atrribute work around removed from CCRX_Port
2021-06-11 22:25:36 +02:00
c7f51cde40
implement usbh_edpt_busy (WIP), remove hcd_edpt_busy
2021-06-10 17:19:21 +07:00
5a554508ca
Merge remote-tracking branch 'upstream/master' into CCRX_Port
2021-06-03 22:17:30 +02:00
b4f092ec74
Adaptations for Renesas CCRX toolchain and Rx72N controller performed
2021-05-29 21:23:39 +02:00
faa31152b4
rename usbd_edpt_iso_xfer to usbd_edpt_xfer_fifo
2021-05-26 20:34:06 +07:00
ce59d69520
Merge remote-tracking branch 'official/master'
2021-05-25 09:27:35 -04:00
db8ea7ea1c
clean up
2021-05-18 12:58:24 +07:00
3a7f8b3ac3
separte tusb_init/inited() to tud/tuh init/inited
...
add rhport to tud_init()
2021-05-18 12:58:24 +07:00
2666e1efec
add tuh_inited() and tud_inited()
2021-05-18 12:58:24 +07:00
05892a5a1e
Merge branch 'master' of github.com:xmos-jmccarthy/tinyusb
2021-05-06 12:18:55 -04:00
b15d126d59
lpc55 improve multiple controller support
...
port1 highspeed requires USB_RAM
2021-04-24 13:36:05 +07:00
9ecb91e1bd
fix build with LOG=2
2021-04-15 23:47:28 +07:00
hathach