hathach
6fbca0ea87
remove legacy code of msc_device.c read10 & write10
...
clean up some warnings
2014-03-13 18:25:20 +07:00
hathach
f1692c93ac
fix some warnings
2014-03-13 18:11:59 +07:00
hathach
ad72db5aea
change IAR TUSB_CFG_ATTR_USBRAM to _Pragma("location=\".ahb_sram1\"") instead of @ .ahb_sram1 so that we can place it before the variable for a cleaner code
...
change pipe xfer API buffer from void* to uint8_t*
change FIFO_DEF to have a separated buffer to be compatible with IAR\
refractor IAR data alignment pragma
2014-03-10 13:13:13 +07:00
hathach
da6b2fbef8
EHCI: immediately reset port when device connected. This proves to help prevent duplication connection event (also with OHCI)
...
increase delay after reset to 100 ms (NXP's EHCI does not work with 50ms)
--> fix all duplication connection with OHCI & EHCI
2014-02-28 17:08:47 +07:00
hathach
533c8d2eed
use hcd_pipe_is_busy instead of hcd_pipe_is_idle
...
remove hcd_pipe_is_idle
2014-02-20 10:41:31 +07:00
hathach
d86523b16c
re-enable blocking waiting in ehci controller reset (otherwise it wont works)
2014-02-19 15:50:39 +07:00
hathach
d020c2f609
remove immediately reset when device plug.
...
check to make sure device is still plug after initial delay (200ms) before reset
remove blocking waiting when reset in ehci.c
2013-12-19 13:55:22 +07:00
hathach
eaacbd4a36
able to run MSC host demo on lpc17xx
...
implement walk around for halted ED in OHCI
2013-12-18 14:57:34 +07:00
hathach
75ffc0bfec
implement ohci
...
- hcd_port_reset
- hcd_port_connect_status
- hcd_port_speed_get
- hcd_pipe_control_open
- hcd_pipe_control_xfer
- done_queue_isr for control xfer
able to go through enumeration with MSC device
2013-12-16 12:35:05 +07:00
hathach
4d14e2ac50
add structure & define for ohci
2013-12-11 14:31:27 +07:00
hathach
a5ba283557
change MCU to TUSB_CFG_MCU
2013-11-25 12:48:27 +07:00
hathach
b2b53e61fb
refractor dcd_controller_reset & hcd_controller_reset to hal_controller_reset
2013-11-06 12:15:11 +07:00
hathach
3a54ad4c0d
implement msc device class
...
usbd auto stall control for not supported return from class control request
usbd implement xfer isr callback mechanism
DCD
- implement dcd multiple qtd support
- dcd dcd_pipe_stall
- implement dcd_pipe_queue_xfer
- xfer_complete_isr
- flush control endpoint if received new setup while previous transfer is not complete
change msc_cmd_block_wrapper_t flags field to dir
force full speed for easy testing
NOTEs: somehow unable to get endpoint IN interrupt with ioc
2013-11-01 12:11:26 +07:00
hathach
357813f171
implementing sw device stack
2013-10-29 11:27:25 +07:00
hathach
b71ffe3d5a
change TUSB_CFG_CONTROLLER0/1_MODE to TUSB_CFG_CONTROLLER_0/1_MODE for clearance
...
adding configuration docs for tinyusb_config.h
document HID mouse & keyboard API
2013-10-24 15:32:54 +07:00
hathach
de7e21dc66
refractor hub api
...
fix all test build errors
2013-10-16 11:05:33 +07:00
hathach
6f9172c15f
clean up warnings here and there
2013-10-02 14:20:05 +07:00
hathach
640b0ec546
- move disconnection handle to enum task --> move tusbh_xxx_unmount is invoked in non-isr context
2013-10-01 13:53:54 +07:00
hathach
14ebd6c4d9
refractor hub
2013-10-01 11:29:25 +07:00
hathach
93821c55ce
hack ehci advance async to handle disconnect via hub
2013-09-30 18:40:20 +07:00
hathach
3cc169f2fd
able to mount one device on the hub
2013-09-30 15:16:23 +07:00
hathach
eb1a101667
house keeping
2013-09-27 22:38:23 +07:00
hathach
bbfa85aa08
allow a limited model to deal with stalled pipe/transaction
...
added stall clear & able to mount the stupid toshiba thumb drive
add HCD pipe API
- bool hcd_pipe_is_busy(pipe_handle_t pipe_hdl);
- bool hcd_pipe_is_stalled(pipe_handle_t pipe_hdl);
- uint8_t hcd_pipe_get_endpoint_addr(pipe_handle_t pipe_hdl);
- tusb_error_t hcd_pipe_clear_stall(pipe_handle_t pipe_hdl);
remove tusbh_device_mount_failed_cb (not neccessary for user)
2013-09-24 18:23:34 +07:00
hathach
63b776f7cf
add some tests support for msc host
...
refractor msch buffer for getting inital scsi like inquiry, read capacity
adding support for resovling stall on control pipe
2013-09-24 15:21:16 +07:00
hathach
85f3ad9d3b
refractor hcd API to allow queue xfer without actually transferring data
2013-09-23 00:24:51 +07:00
hathach
cc91a73cdc
fix pingstate for highspeed bulk out transfer
...
temp implementation of msc host --> can issue inquiry command
2013-09-22 18:44:55 +07:00
hathach
5708863859
house keeping, clean up warnings
2013-09-21 14:38:40 +07:00
hathach
d15ba08fdc
house keeping
2013-09-21 13:17:43 +07:00
hathach
f8f398a681
start to add msc host, fix dangerous problem with unstable device when plugged --> 200 ms delay. 50ms delay after each port reset
2013-09-20 23:53:48 +07:00
hathach
86681fe442
starting to add support for IAR workbench
2013-09-19 16:11:11 +07:00
hathach
c71f5c6f1b
integrate & able to run cmsis-rtx with current code base
2013-09-13 16:53:17 +07:00
hathach
25304d142f
refractor qhd_xfer_error_isr (omit xfer_type para)
...
add accumulated total xferred byte for an endpoint until transfer with IOC set
- control xfer will have length of data phase in usbh_xfer_isr callback
2013-07-06 14:52:02 +07:00
hathach
68da489c2e
refractor ehci.c adding qhd_get_xfer_type
2013-07-06 13:41:48 +07:00
hathach
374aea7a11
change usbh_control_xfer_subtask to use flat API instead of passing tusb_control_request_t struct
2013-07-05 13:23:42 +07:00
hathach
391e132d6b
no big deal, only rename tusb_std_request_t to tusb_control_request_t
2013-07-04 12:25:39 +07:00
hathach
539c7cdbe1
update usbh_xfer_isr to take actual byte transferred and correct tests
2013-07-02 17:37:55 +07:00
hathach
e1ad7b62cf
add way to calculate the actual byte transferred with ehci
...
add come callback for cdch
add code for cdc serial demo
2013-07-02 17:20:25 +07:00
hathach
7e5c6ded2d
add tusbh_cdc_serial_is_mounted API
...
test for cdch close driver
2013-07-02 15:32:41 +07:00
hathach
12526b34a1
extract qhd_xfer_error_isr
...
add support for period list in xfer_error_isr
pass period TUSB_EVENT_XFER_ERROR & TUSB_EVENT_XFER_STALLED tests
2013-07-02 12:22:46 +07:00
hathach
9fea5291bf
refractor extract list_next
...
add support for TUSB_EVENT_XFER_STALL
add test for error/stall in periodic list
2013-07-02 12:01:51 +07:00
hathach
958d390a85
refractor code
2013-07-01 20:28:16 +07:00
hathach
3f9f3f08d2
add cdc host driver close cdch_close
...
refractor
- add helper function in ehci qhd_next & qtd_next
- extract function qhd_create_pipe_handle
rename tusb_transfer_type_t to tusb_xfer_type_t
add some handling for stall
2013-07-01 18:53:25 +07:00
hathach
d8bd749c75
change control xfer check in usbh_xfer_isr
...
rename
- async_list_process_isr to async_list_xfer_complete_isr
- period_list_process_isr to period_list_xfer_complete_isr
extract function void qhd_xfer_complete_isr(ehci_qhd_t * p_qhd, tusb_transfer_type_t xfer_type)
2013-07-01 16:14:46 +07:00
hathach
3f0d740776
rename usbh_isr to usbh_xfer_isr
2013-07-01 15:30:29 +07:00
hathach
2cc5df9b00
add custom bulk out test
2013-06-23 01:10:59 +07:00
hathach
fe53297b17
fix bug with custom class that terminate xfer after the first QTD
2013-06-22 22:26:00 +07:00
hathach
5c564df8c1
add api for hcd: hcd_pipe_is_idle
...
add api for usbh: tusbh_device_get_mounted_class_flag
implement api for custom class
- is mounted
- read
2013-06-21 14:20:08 +07:00
hathach
3924764dff
[host lpc43xx] adding support for host custom class
...
refractor usbh class driver indexing
opt out periodic list code in EHCI (need to refractor/group later)
[device lpc176x] rename dcd_endpoint_configure to dcd_pipe_open
add usbd_pipe_open to manage pipe
2013-06-21 13:11:45 +07:00
hathach
63add70139
test clean up
2013-05-09 12:49:52 +07:00
hathach
861f02943d
add log2_of and use this function in get_period_head
2013-05-06 20:51:34 +07:00