kingkevin
/
esp32-s2_dfu
1
0
Fork 0
Code Issues Releases Activity

clean up jlink default interface

This commit is contained in:
hathach 2020-10-08 17:17:37 +07:00
parent 30c23719f6
commit ec018fbf4e
65 changed files with 2 additions and 64 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
examples/rules.mk
View File

@ -147,6 +147,8 @@ else
JLINKEXE = JLinkExe JLINKEXE = JLinkExe
endif endif
JLINK_IF ?= swd
# Flash using jlink # Flash using jlink
flash-jlink: $(BUILD)/$(BOARD)-firmware.hex flash-jlink: $(BUILD)/$(BOARD)-firmware.hex
@echo halt > $(BUILD)/$(BOARD).jlink @echo halt > $(BUILD)/$(BOARD).jlink

1
hw/bsp/adafruit_clue/board.mk
View File

@ -49,7 +49,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = nRF52840_xxAA JLINK_DEVICE = nRF52840_xxAA
JLINK_IF = swd
# For uf2 conversion # For uf2 conversion
UF2_FAMILY = 0xADA52840 UF2_FAMILY = 0xADA52840

1
hw/bsp/arduino_nano33_ble/board.mk
View File

@ -51,7 +51,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = nRF52840_xxAA JLINK_DEVICE = nRF52840_xxAA
JLINK_IF = swd
# flash using bossac (as part of Nano33 BSP tools) # flash using bossac (as part of Nano33 BSP tools)
# can be found in arduino15/packages/arduino/tools/bossac/ # can be found in arduino15/packages/arduino/tools/bossac/

1
hw/bsp/circuitplayground_bluefruit/board.mk
View File

@ -49,7 +49,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = nRF52840_xxAA JLINK_DEVICE = nRF52840_xxAA
JLINK_IF = swd
# For uf2 conversion # For uf2 conversion
UF2_FAMILY = 0xADA52840 UF2_FAMILY = 0xADA52840

1
hw/bsp/circuitplayground_express/board.mk
View File

@ -38,7 +38,6 @@ FREERTOS_PORT = ARM_CM0
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = ATSAMD21G18 JLINK_DEVICE = ATSAMD21G18
JLINK_IF = swd
# flash using jlink # flash using jlink
flash: $(BUILD)/$(BOARD)-firmware.uf2 flash: $(BUILD)/$(BOARD)-firmware.uf2

1
hw/bsp/d5035_01/board.mk
View File

@ -57,7 +57,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = ATSAME51J19 JLINK_DEVICE = ATSAME51J19
JLINK_IF = swd
# flash using jlink # flash using jlink
flash: flash-jlink flash: flash-jlink

1
hw/bsp/da14695_dk_usb/board.mk
View File

@ -38,7 +38,6 @@ FREERTOS_PORT = ARM_CM33_NTZ/non_secure
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = DA14695 JLINK_DEVICE = DA14695
JLINK_IF = swd
# flash using jlink but with some twists # flash using jlink but with some twists
flash: flash-dialog flash: flash-dialog

1
hw/bsp/da1469x_dk_pro/board.mk
View File

@ -38,7 +38,6 @@ FREERTOS_PORT = ARM_CM33_NTZ/non_secure
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = DA14699 JLINK_DEVICE = DA14699
JLINK_IF = swd
# flash using jlink but with some twists # flash using jlink but with some twists
flash: flash-dialog flash: flash-dialog

1
hw/bsp/ea4088qs/board.mk
View File

@ -42,7 +42,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = LPC4088 JLINK_DEVICE = LPC4088
JLINK_IF = swd
# flash using jlink # flash using jlink
flash: flash-jlink flash: flash-jlink

1
hw/bsp/ea4357/board.mk
View File

@ -42,7 +42,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = LPC4357_M4 JLINK_DEVICE = LPC4357_M4
JLINK_IF = swd
# flash using jlink # flash using jlink
flash: flash-jlink flash: flash-jlink

1
hw/bsp/feather_m0_express/board.mk
View File

@ -39,7 +39,6 @@ FREERTOS_PORT = ARM_CM0
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = ATSAMD21G18 JLINK_DEVICE = ATSAMD21G18
JLINK_IF = swd
# flash using bossac at least version 1.8 # flash using bossac at least version 1.8
# can be found in arduino15/packages/arduino/tools/bossac/ # can be found in arduino15/packages/arduino/tools/bossac/

1
hw/bsp/feather_m4_express/board.mk
View File

@ -42,7 +42,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = ATSAMD51J19 JLINK_DEVICE = ATSAMD51J19
JLINK_IF = swd
# flash using bossac at least version 1.8 # flash using bossac at least version 1.8
# can be found in arduino15/packages/arduino/tools/bossac/ # can be found in arduino15/packages/arduino/tools/bossac/

1
hw/bsp/feather_nrf52840_express/board.mk
View File

@ -50,7 +50,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = nRF52840_xxAA JLINK_DEVICE = nRF52840_xxAA
JLINK_IF = swd
# For uf2 conversion # For uf2 conversion
UF2_FAMILY = 0xADA52840 UF2_FAMILY = 0xADA52840

1
hw/bsp/feather_nrf52840_sense/board.mk
View File

@ -49,7 +49,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = nRF52840_xxAA JLINK_DEVICE = nRF52840_xxAA
JLINK_IF = swd
# For uf2 conversion # For uf2 conversion
UF2_FAMILY = 0xADA52840 UF2_FAMILY = 0xADA52840

1
hw/bsp/feather_stm32f405/board.mk
View File

@ -44,7 +44,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = stm32f405rg JLINK_DEVICE = stm32f405rg
JLINK_IF = swd
# Path to STM32 Cube Programmer CLI, should be added into system path # Path to STM32 Cube Programmer CLI, should be added into system path
STM32Prog = STM32_Programmer_CLI STM32Prog = STM32_Programmer_CLI

1
hw/bsp/itsybitsy_m0/board.mk
View File

@ -39,7 +39,6 @@ FREERTOS_PORT = ARM_CM0
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = ATSAMD21G18 JLINK_DEVICE = ATSAMD21G18
JLINK_IF = swd
# flash using bossac at least version 1.8 # flash using bossac at least version 1.8
# can be found in arduino15/packages/arduino/tools/bossac/ # can be found in arduino15/packages/arduino/tools/bossac/

1
hw/bsp/itsybitsy_m4/board.mk
View File

@ -42,7 +42,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = ATSAMD51J19 JLINK_DEVICE = ATSAMD51J19
JLINK_IF = swd
# flash using bossac at least version 1.8 # flash using bossac at least version 1.8
# can be found in arduino15/packages/arduino/tools/bossac/ # can be found in arduino15/packages/arduino/tools/bossac/

1
hw/bsp/itsybitsy_nrf52840/board.mk
View File

@ -50,7 +50,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = nRF52840_xxAA JLINK_DEVICE = nRF52840_xxAA
JLINK_IF = swd
# For uf2 conversion # For uf2 conversion
UF2_FAMILY = 0xADA52840 UF2_FAMILY = 0xADA52840

1
hw/bsp/lpcxpresso11u37/board.mk
View File

@ -40,7 +40,6 @@ FREERTOS_PORT = ARM_CM0
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = LPC11U37/401 JLINK_DEVICE = LPC11U37/401
JLINK_IF = swd
# flash using pyocd # flash using pyocd
flash: $(BUILD)/$(BOARD)-firmware.hex flash: $(BUILD)/$(BOARD)-firmware.hex

1
hw/bsp/lpcxpresso11u68/board.mk
View File

@ -37,7 +37,6 @@ FREERTOS_PORT = ARM_CM0
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = LPC11U68 JLINK_DEVICE = LPC11U68
JLINK_IF = swd
# flash using pyocd # flash using pyocd
flash: $(BUILD)/$(BOARD)-firmware.hex flash: $(BUILD)/$(BOARD)-firmware.hex

1
hw/bsp/lpcxpresso1347/board.mk
View File

@ -40,7 +40,6 @@ FREERTOS_PORT = ARM_CM3
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = LPC1347 JLINK_DEVICE = LPC1347
JLINK_IF = swd
# flash using jlink # flash using jlink
flash: flash-jlink flash: flash-jlink

1
hw/bsp/lpcxpresso1549/board.mk
View File

@ -40,7 +40,6 @@ FREERTOS_PORT = ARM_CM3
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = LPC1549 JLINK_DEVICE = LPC1549
JLINK_IF = swd
# flash using jlink # flash using jlink
flash: flash-jlink flash: flash-jlink

1
hw/bsp/lpcxpresso1769/board.mk
View File

@ -39,7 +39,6 @@ FREERTOS_PORT = ARM_CM3
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = LPC1769 JLINK_DEVICE = LPC1769
JLINK_IF = swd
# flash using jlink # flash using jlink
flash: flash-jlink flash: flash-jlink

1
hw/bsp/lpcxpresso51u68/board.mk
View File

@ -41,7 +41,6 @@ FREERTOS_PORT = ARM_CM0
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = LPC51U68 JLINK_DEVICE = LPC51U68
JLINK_IF = swd
# flash using pyocd (51u68 is not supported yet) # flash using pyocd (51u68 is not supported yet)
flash: $(BUILD)/$(BOARD)-firmware.hex flash: $(BUILD)/$(BOARD)-firmware.hex

1
hw/bsp/lpcxpresso54114/board.mk
View File

@ -43,7 +43,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = LPC54114J256_M4 JLINK_DEVICE = LPC54114J256_M4
JLINK_IF = swd
# flash using pyocd # flash using pyocd
flash: $(BUILD)/$(BOARD)-firmware.hex flash: $(BUILD)/$(BOARD)-firmware.hex

1
hw/bsp/lpcxpresso55s69/board.mk
View File

@ -43,7 +43,6 @@ FREERTOS_PORT = ARM_CM33_NTZ/non_secure
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = LPC55S69 JLINK_DEVICE = LPC55S69
JLINK_IF = swd
# flash using pyocd # flash using pyocd
flash: $(BUILD)/$(BOARD)-firmware.hex flash: $(BUILD)/$(BOARD)-firmware.hex

1
hw/bsp/luna/board.mk
View File

@ -39,7 +39,6 @@ FREERTOS_PORT = ARM_CM0
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = ATSAMD21G18 JLINK_DEVICE = ATSAMD21G18
JLINK_IF = swd
# flash using jlink # flash using jlink
flash: $(BUILD)/$(BOARD)-firmware.bin flash: $(BUILD)/$(BOARD)-firmware.bin

1
hw/bsp/mbed1768/board.mk
View File

@ -39,7 +39,6 @@ FREERTOS_PORT = ARM_CM3
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = LPC1768 JLINK_DEVICE = LPC1768
JLINK_IF = swd
# flash using pyocd # flash using pyocd
flash: $(BUILD)/$(BOARD)-firmware.hex flash: $(BUILD)/$(BOARD)-firmware.hex

1
hw/bsp/mcb1800/board.mk
View File

@ -37,7 +37,6 @@ FREERTOS_PORT = ARM_CM3
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = LPC1857 JLINK_DEVICE = LPC1857
JLINK_IF = swd
# flash using jlink # flash using jlink
flash: flash-jlink flash: flash-jlink

1
hw/bsp/metro_m0_express/board.mk
View File

@ -39,7 +39,6 @@ FREERTOS_PORT = ARM_CM0
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = ATSAMD21G18 JLINK_DEVICE = ATSAMD21G18
JLINK_IF = swd
# flash using bossac at least version 1.8 # flash using bossac at least version 1.8
# can be found in arduino15/packages/arduino/tools/bossac/ # can be found in arduino15/packages/arduino/tools/bossac/

1
hw/bsp/metro_m4_express/board.mk
View File

@ -42,7 +42,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = ATSAMD51J19 JLINK_DEVICE = ATSAMD51J19
JLINK_IF = swd
# flash using bossac at least version 1.8 # flash using bossac at least version 1.8
# can be found in arduino15/packages/arduino/tools/bossac/ # can be found in arduino15/packages/arduino/tools/bossac/

1
hw/bsp/mimxrt1010_evk/board.mk
View File

@ -46,7 +46,6 @@ FREERTOS_PORT = ARM_CM7/r0p1
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = MIMXRT1011DAE5A JLINK_DEVICE = MIMXRT1011DAE5A
JLINK_IF = swd
# flash by copying bin file to DAP Mass Storage # flash by copying bin file to DAP Mass Storage
flash: $(BUILD)/$(BOARD)-firmware.bin flash: $(BUILD)/$(BOARD)-firmware.bin

1
hw/bsp/mimxrt1020_evk/board.mk
View File

@ -45,7 +45,6 @@ FREERTOS_PORT = ARM_CM7/r0p1
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = MIMXRT1021DAG5A JLINK_DEVICE = MIMXRT1021DAG5A
JLINK_IF = swd
# flash by copying bin file to DAP Mass Storage # flash by copying bin file to DAP Mass Storage
flash: $(BUILD)/$(BOARD)-firmware.bin flash: $(BUILD)/$(BOARD)-firmware.bin

1
hw/bsp/mimxrt1050_evkb/board.mk
View File

@ -45,7 +45,6 @@ FREERTOS_PORT = ARM_CM7/r0p1
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = MIMXRT1052xxx6B JLINK_DEVICE = MIMXRT1052xxx6B
JLINK_IF = swd
# flash by copying bin file to DAP Mass Storage # flash by copying bin file to DAP Mass Storage
flash: $(BUILD)/$(BOARD)-firmware.bin flash: $(BUILD)/$(BOARD)-firmware.bin

1
hw/bsp/mimxrt1060_evk/board.mk
View File

@ -45,7 +45,6 @@ FREERTOS_PORT = ARM_CM7/r0p1
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = MIMXRT1062xxx6A JLINK_DEVICE = MIMXRT1062xxx6A
JLINK_IF = swd
# flash by copying bin file to DAP Mass Storage # flash by copying bin file to DAP Mass Storage
flash: $(BUILD)/$(BOARD)-firmware.bin flash: $(BUILD)/$(BOARD)-firmware.bin

1
hw/bsp/mimxrt1064_evk/board.mk
View File

@ -45,7 +45,6 @@ FREERTOS_PORT = ARM_CM7/r0p1
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = MIMXRT1064xxx6A JLINK_DEVICE = MIMXRT1064xxx6A
JLINK_IF = swd
# flash by copying bin file to DAP Mass Storage # flash by copying bin file to DAP Mass Storage
flash: $(BUILD)/$(BOARD)-firmware.bin flash: $(BUILD)/$(BOARD)-firmware.bin

1
hw/bsp/nrf52840_mdk_dongle/board.mk
View File

@ -48,7 +48,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = nRF52840_xxAA JLINK_DEVICE = nRF52840_xxAA
JLINK_IF = swd
# flash using Nordic nrfutil (pip2 install nrfutil) # flash using Nordic nrfutil (pip2 install nrfutil)
# make BOARD=nrf52840_mdk_dongle SERIAL=/dev/ttyACM0 all flash # make BOARD=nrf52840_mdk_dongle SERIAL=/dev/ttyACM0 all flash

1
hw/bsp/nutiny_nuc121s/board.mk
View File

@ -49,7 +49,6 @@ FREERTOS_PORT = ARM_CM0
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = NUC121SC2AE JLINK_DEVICE = NUC121SC2AE
JLINK_IF = swd
# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton # Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton
# Please compile and install it from github source # Please compile and install it from github source

1
hw/bsp/nutiny_nuc125s/board.mk
View File

@ -33,7 +33,6 @@ FREERTOS_PORT = ARM_CM0
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = NUC125SC2AE JLINK_DEVICE = NUC125SC2AE
JLINK_IF = swd
# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton # Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton
# Please compile and install it from github source # Please compile and install it from github source

1
hw/bsp/nutiny_nuc126v/board.mk
View File

@ -53,7 +53,6 @@ FREERTOS_PORT = ARM_CM0
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = NUC126VG4AE JLINK_DEVICE = NUC126VG4AE
JLINK_IF = swd
# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton # Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton
# Please compile and install it from github source # Please compile and install it from github source

1
hw/bsp/nutiny_sdk_nuc120/board.mk
View File

@ -49,7 +49,6 @@ FREERTOS_PORT = ARM_CM0
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = NUC120LE3 JLINK_DEVICE = NUC120LE3
JLINK_IF = swd
# Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton # Flash using Nuvoton's openocd fork at https://github.com/OpenNuvoton/OpenOCD-Nuvoton
# Please compile and install it from github source # Please compile and install it from github source

1
hw/bsp/nutiny_sdk_nuc505/board.mk
View File

@ -44,7 +44,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = NUC505YO13Y JLINK_DEVICE = NUC505YO13Y
JLINK_IF = swd
# Note # Note
# To be able to program the SPI flash, it need to boot with ICP mode "1011". # To be able to program the SPI flash, it need to boot with ICP mode "1011".

1
hw/bsp/pca10056/board.mk
View File

@ -50,7 +50,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = nRF52840_xxAA JLINK_DEVICE = nRF52840_xxAA
JLINK_IF = swd
# flash using jlink # flash using jlink
flash: flash-jlink flash: flash-jlink

1
hw/bsp/pca10059/board.mk
View File

@ -49,7 +49,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = nRF52840_xxAA JLINK_DEVICE = nRF52840_xxAA
JLINK_IF = swd
# flash using Nordic nrfutil (pip2 install nrfutil) # flash using Nordic nrfutil (pip2 install nrfutil)
# make BOARD=pca10059 SERIAL=/dev/ttyACM0 all flash # make BOARD=pca10059 SERIAL=/dev/ttyACM0 all flash

1
hw/bsp/pca10100/board.mk
View File

@ -50,7 +50,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = nRF52833_XXAA JLINK_DEVICE = nRF52833_XXAA
JLINK_IF = swd
# flash using jlink # flash using jlink
flash: flash-jlink flash: flash-jlink

1
hw/bsp/pyboardv11/board.mk
View File

@ -40,7 +40,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = stm32f405rg JLINK_DEVICE = stm32f405rg
JLINK_IF = swd
# flash target using on-board stlink # flash target using on-board stlink
flash: flash-stlink flash: flash-stlink

1
hw/bsp/raytac_mdbt50q_rx/board.mk
View File

@ -48,7 +48,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = nRF52840_xxAA JLINK_DEVICE = nRF52840_xxAA
JLINK_IF = swd
# flash using jlink # flash using jlink
flash: flash-jlink flash: flash-jlink

1
hw/bsp/samd11_xplained/board.mk
View File

@ -40,7 +40,6 @@ FREERTOS_PORT = ARM_CM0
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = ATSAMD11D14 JLINK_DEVICE = ATSAMD11D14
JLINK_IF = swd
# flash using edbg # flash using edbg
flash: $(BUILD)/$(BOARD)-firmware.bin flash: $(BUILD)/$(BOARD)-firmware.bin

1
hw/bsp/samg55xplained/board.mk
View File

@ -47,7 +47,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = ATSAMG55J19 JLINK_DEVICE = ATSAMG55J19
JLINK_IF = swd
# flash using edbg from https://github.com/ataradov/edbg # flash using edbg from https://github.com/ataradov/edbg
flash: $(BUILD)/$(BOARD)-firmware.bin flash: $(BUILD)/$(BOARD)-firmware.bin

1
hw/bsp/seeeduino_xiao/board.mk
View File

@ -39,7 +39,6 @@ FREERTOS_PORT = ARM_CM0
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = ATSAMD21G18 JLINK_DEVICE = ATSAMD21G18
JLINK_IF = swd
# flash using jlink # flash using jlink
flash: flash-jlink flash: flash-jlink

1
hw/bsp/stm32f070rbnucleo/board.mk
View File

@ -44,7 +44,6 @@ FREERTOS_PORT = ARM_CM0
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = stm32f070rb JLINK_DEVICE = stm32f070rb
JLINK_IF = swd
# flash target using on-board stlink # flash target using on-board stlink
flash: flash-stlink flash: flash-stlink

1
hw/bsp/stm32f072disco/board.mk
View File

@ -45,7 +45,6 @@ FREERTOS_PORT = ARM_CM0
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = stm32f072rb JLINK_DEVICE = stm32f072rb
JLINK_IF = swd
# flash target using on-board stlink # flash target using on-board stlink
flash: flash-stlink flash: flash-stlink

1
hw/bsp/stm32f103bluepill/board.mk
View File

@ -43,7 +43,6 @@ FREERTOS_PORT = ARM_CM3
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = stm32f103c8 JLINK_DEVICE = stm32f103c8
JLINK_IF = swd
# flash target ROM bootloader # flash target ROM bootloader
flash: $(BUILD)/$(BOARD)-firmware.bin flash: $(BUILD)/$(BOARD)-firmware.bin

1
hw/bsp/stm32f207nucleo/board.mk
View File

@ -43,7 +43,6 @@ FREERTOS_PORT = ARM_CM3
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = stm32f207zg JLINK_DEVICE = stm32f207zg
JLINK_IF = swd
# flash target using on-board stlink # flash target using on-board stlink
flash: flash-stlink flash: flash-stlink

1
hw/bsp/stm32f303disco/board.mk
View File

@ -44,7 +44,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = stm32f303vc JLINK_DEVICE = stm32f303vc
JLINK_IF = swd
# flash target using on-board stlink # flash target using on-board stlink
flash: flash-stlink flash: flash-stlink

1
hw/bsp/stm32f401blackpill/board.mk
View File

@ -40,7 +40,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = stm32f401cc JLINK_DEVICE = stm32f401cc
JLINK_IF = swd
# flash target ROM bootloader # flash target ROM bootloader
flash: $(BUILD)/$(BOARD)-firmware.bin flash: $(BUILD)/$(BOARD)-firmware.bin

1
hw/bsp/stm32f407disco/board.mk
View File

@ -44,7 +44,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = stm32f407vg JLINK_DEVICE = stm32f407vg
JLINK_IF = swd
# flash target using on-board stlink # flash target using on-board stlink
flash: flash-stlink flash: flash-stlink

1
hw/bsp/stm32f411blackpill/board.mk
View File

@ -40,7 +40,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = stm32f411ce JLINK_DEVICE = stm32f411ce
JLINK_IF = swd
# flash target ROM bootloader # flash target ROM bootloader
flash: $(BUILD)/$(BOARD)-firmware.bin flash: $(BUILD)/$(BOARD)-firmware.bin

1
hw/bsp/stm32f411disco/board.mk
View File

@ -44,7 +44,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = stm32f411ve JLINK_DEVICE = stm32f411ve
JLINK_IF = swd
# flash target using on-board stlink # flash target using on-board stlink
flash: flash-stlink flash: flash-stlink

1
hw/bsp/stm32f412disco/board.mk
View File

@ -45,7 +45,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = stm32f41zx JLINK_DEVICE = stm32f41zx
JLINK_IF = swd
# flash target using on-board stlink # flash target using on-board stlink
flash: flash-stlink flash: flash-stlink

1
hw/bsp/stm32h743eval/board.mk
View File

@ -57,7 +57,6 @@ FREERTOS_PORT = ARM_CM7/r0p1
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = stm32h743xi JLINK_DEVICE = stm32h743xi
JLINK_IF = swd
# flash target using on-board stlink # flash target using on-board stlink
flash: flash-stlink flash: flash-stlink

1
hw/bsp/stm32h745disco/board.mk
View File

@ -52,7 +52,6 @@ FREERTOS_PORT = ARM_CM7/r0p1
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = stm32h745xi JLINK_DEVICE = stm32h745xi
JLINK_IF = swd
# flash target using on-board stlink # flash target using on-board stlink
flash: flash-stlink flash: flash-stlink

1
hw/bsp/stm32l0538disco/board.mk
View File

@ -44,7 +44,6 @@ FREERTOS_PORT = ARM_CM0
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = STM32L053R8 JLINK_DEVICE = STM32L053R8
JLINK_IF = swd
# Path to STM32 Cube Programmer CLI, should be added into system path # Path to STM32 Cube Programmer CLI, should be added into system path
STM32Prog = STM32_Programmer_CLI STM32Prog = STM32_Programmer_CLI

1
hw/bsp/stm32l476disco/board.mk
View File

@ -43,7 +43,6 @@ FREERTOS_PORT = ARM_CM4F
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = stm32l476vg JLINK_DEVICE = stm32l476vg
JLINK_IF = swd
# Path to STM32 Cube Programmer CLI, should be added into system path # Path to STM32 Cube Programmer CLI, should be added into system path
STM32Prog = STM32_Programmer_CLI STM32Prog = STM32_Programmer_CLI

1
hw/bsp/teensy_40/board.mk
View File

@ -45,7 +45,6 @@ FREERTOS_PORT = ARM_CM7/r0p1
# For flash-jlink target # For flash-jlink target
JLINK_DEVICE = MIMXRT1062xxx6A JLINK_DEVICE = MIMXRT1062xxx6A
JLINK_IF = swd
# flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli # flash by using teensy_loader_cli https://github.com/PaulStoffregen/teensy_loader_cli
# Make sure it is in your PATH # Make sure it is in your PATH