move board files

This commit is contained in:
hathach 2013-05-27 11:57:16 +07:00
parent ed217948b8
commit 7ae986de95
2 changed files with 188 additions and 0 deletions

View File

@ -0,0 +1,115 @@
/**************************************************************************/
/*!
@file board_ngx4330.c
@author hathach (tinyusb.org)
@section LICENSE
Software License Agreement (BSD License)
Copyright (c) 2013, hathach (tinyusb.org)
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holders nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This file is part of the tinyusb stack.
*/
/**************************************************************************/
#include "../board.h"
#if BOARD == BOARD_NGX4330
#define BOARD_MAX_LEDS 2
const static struct {
uint8_t port;
uint8_t pin;
}leds[BOARD_MAX_LEDS] = { {1, 11}, {1,12} };
void board_init(void)
{
SystemInit();
CGU_Init();
SysTick_Config( CGU_GetPCLKFrequency(CGU_PERIPHERAL_M4CORE)/CFG_TICKS_PER_SECOND ); /* 1 ms Timer */
//------------- USB Bus power HOST ONLY-------------//
scu_pinmux(0x1, 7, MD_PUP | MD_EZI, FUNC4); // P1_7 USB0_PWR_EN, USB0 VBus function Xplorer
scu_pinmux(0x2, 6, MD_PUP | MD_EZI, FUNC4); // P2_6 is configured as GPIO5[6] for USB1_PWR_EN
GPIO_SetDir (5, BIT_(6), 1); // GPIO5[6] is output
GPIO_SetValue (5, BIT_(6)); // GPIO5[6] output high
// Leds Init
for (uint8_t i=0; i<BOARD_MAX_LEDS; i++)
{
scu_pinmux(leds[i].port, leds[i].pin, MD_PUP|MD_EZI|MD_ZI, FUNC0);
GPIO_SetDir(leds[i].port, BIT_(leds[i].pin), 1); // output
}
#if CFG_UART_ENABLE
//------------- UART init -------------//
UART_CFG_Type UARTConfigStruct;
scu_pinmux(0x6 ,4, MD_PDN|MD_EZI, FUNC2); // UART0_TXD
scu_pinmux(0x6 ,5, MD_PDN|MD_EZI, FUNC2); // UART0_RXD
UART_ConfigStructInit(&UARTConfigStruct); // default: baud = 9600, 8 bit data, 1 stop bit, no parity
UARTConfigStruct.Baud_rate = CFG_UART_BAUDRATE; // Re-configure baudrate
UART_Init((LPC_USARTn_Type*) LPC_USART0, &UARTConfigStruct); // Initialize UART port
UART_TxCmd((LPC_USARTn_Type*) LPC_USART0, ENABLE); // Enable UART
#endif
}
//--------------------------------------------------------------------+
// LEDS
//--------------------------------------------------------------------+
void board_leds(uint32_t on_mask, uint32_t off_mask)
{
for (uint32_t i=0; i<BOARD_MAX_LEDS; i++)
{
if ( on_mask & BIT_(i))
{
GPIO_SetValue(leds[i].port, BIT_(leds[i].pin));
}else if ( off_mask & BIT_(i)) // on_mask take precedence over off_mask
{
GPIO_ClearValue(leds[i].port, BIT_(leds[i].pin));
}
}
}
//--------------------------------------------------------------------+
// UART
//--------------------------------------------------------------------+
uint32_t board_uart_send(uint8_t *p_buffer, uint32_t length)
{
return UART_Send((LPC_USARTn_Type*) LPC_USART0, p_buffer, length, BLOCKING);
}
uint32_t board_uart_recv(uint8_t *p_buffer, uint32_t length)
{
return UART_Receive((LPC_USARTn_Type*) LPC_USART0, p_buffer, length, BLOCKING);
}
#endif

View File

@ -0,0 +1,73 @@
/**************************************************************************/
/*!
@file board_ngx4330.h
@author hathach (tinyusb.org)
@section LICENSE
Software License Agreement (BSD License)
Copyright (c) 2013, hathach (tinyusb.org)
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
3. Neither the name of the copyright holders nor the
names of its contributors may be used to endorse or promote products
derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS ''AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER BE LIABLE FOR ANY
DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
INCLUDING NEGLIGENCE OR OTHERWISE ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
This file is part of the tinyusb stack.
*/
/**************************************************************************/
/** \file
* \brief TBD
*
* \note TBD
*/
/** \ingroup TBD
* \defgroup TBD
* \brief TBD
*
* @{
*/
#ifndef _TUSB_BOARD_NGX4330_H_
#define _TUSB_BOARD_NGX4330_H_
#include "LPC43xx.h"
#include "lpc43xx_scu.h"
#include "lpc43xx_cgu.h"
#include "lpc43xx_gpio.h"
#include "lpc43xx_uart.h"
#ifdef __cplusplus
extern "C" {
#endif
#define CFG_PRINTF_TARGET PRINTF_TARGET_DEBUG_CONSOLE
#ifdef __cplusplus
}
#endif
#endif /* _TUSB_BOARD_NGX4330_H_ */
/** @} */