commit
33f713f5ef
|
@ -41,6 +41,7 @@ jobs:
|
||||||
family:
|
family:
|
||||||
# Alphabetical order
|
# Alphabetical order
|
||||||
- 'imxrt'
|
- 'imxrt'
|
||||||
|
- 'lpc15'
|
||||||
- 'lpc18'
|
- 'lpc18'
|
||||||
- 'lpc55'
|
- 'lpc55'
|
||||||
- 'nrf'
|
- 'nrf'
|
||||||
|
|
|
@ -38,7 +38,7 @@ The stack supports the following MCUs:
|
||||||
- **NXP:**
|
- **NXP:**
|
||||||
- iMX RT Series: RT1011, RT1015, RT1021, RT1052, RT1062, RT1064
|
- iMX RT Series: RT1011, RT1015, RT1021, RT1052, RT1062, RT1064
|
||||||
- Kinetis: KL25
|
- Kinetis: KL25
|
||||||
- LPC Series: 11Uxx, 13xx, 175x_6x, 177x_8x, 18xx, 40xx, 43xx, 51Uxx, 54xxx, 55xx
|
- LPC Series: 11u, 13, 15, 17, 18, 40, 43, 51u, 54, 55
|
||||||
- **Raspberry Pi:** RP2040
|
- **Raspberry Pi:** RP2040
|
||||||
- **Renesas:** RX63N
|
- **Renesas:** RX63N
|
||||||
- **Silabs:** EFM32GG12
|
- **Silabs:** EFM32GG12
|
||||||
|
|
|
@ -89,21 +89,33 @@ This code base already had supported for a handful of following boards (sorted a
|
||||||
|
|
||||||
- [FRDM-KL25Z](https://www.nxp.com/design/development-boards/freedom-development-boards/mcu-boards/freedom-development-platform-for-kinetis-kl14-kl15-kl24-kl25-mcus:FRDM-KL25Z)
|
- [FRDM-KL25Z](https://www.nxp.com/design/development-boards/freedom-development-boards/mcu-boards/freedom-development-platform-for-kinetis-kl14-kl15-kl24-kl25-mcus:FRDM-KL25Z)
|
||||||
|
|
||||||
### NXP LPC
|
### NXP LPC 11-13-15
|
||||||
|
|
||||||
- [ARM mbed LPC1768](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc1700-cortex-m3/arm-mbed-lpc1768-board:OM11043)
|
|
||||||
- [Embedded Artists LPC4088 Quick Start board](https://www.embeddedartists.com/products/lpc4088-quickstart-board)
|
|
||||||
- [Embedded Artists LPC4357 Developer Kit](http://www.embeddedartists.com/products/kits/lpc4357_kit.php)
|
|
||||||
- [Keil MCB1800 Evaluation Board](http://www.keil.com/mcb1800)
|
|
||||||
- [LPCXpresso 11u37](https://www.nxp.com/design/microcontrollers-developer-resources/lpcxpresso-boards/lpcxpresso-board-for-lpc11u37h:OM13074)
|
- [LPCXpresso 11u37](https://www.nxp.com/design/microcontrollers-developer-resources/lpcxpresso-boards/lpcxpresso-board-for-lpc11u37h:OM13074)
|
||||||
- [LPCXpresso 11u68](https://www.nxp.com/support/developer-resources/evaluation-and-development-boards/lpcxpresso-boards/lpcxpresso-board-for-lpc11u68:OM13058)
|
- [LPCXpresso 11u68](https://www.nxp.com/support/developer-resources/evaluation-and-development-boards/lpcxpresso-boards/lpcxpresso-board-for-lpc11u68:OM13058)
|
||||||
- [LPCXpresso 1347](https://www.nxp.com/support/developer-resources/evaluation-and-development-boards/lpcxpresso-boards/lpcxpresso-board-for-lpc1347:OM13045)
|
- [LPCXpresso 1347](https://www.nxp.com/support/developer-resources/evaluation-and-development-boards/lpcxpresso-boards/lpcxpresso-board-for-lpc1347:OM13045)
|
||||||
|
- [LPCXpresso 1549](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc1500-cortex-m3/lpcxpresso-board-for-lpc1549:OM13056)
|
||||||
|
|
||||||
|
### NXP LPC 17-40
|
||||||
|
|
||||||
|
- [ARM mbed LPC1768](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc1700-cortex-m3/arm-mbed-lpc1768-board:OM11043)
|
||||||
|
- [Embedded Artists LPC4088 Quick Start board](https://www.embeddedartists.com/products/lpc4088-quickstart-board)
|
||||||
- [LPCXpresso 1769](https://www.nxp.com/support/developer-resources/evaluation-and-development-boards/lpcxpresso-boards/lpcxpresso-board-for-lpc1769:OM13000)
|
- [LPCXpresso 1769](https://www.nxp.com/support/developer-resources/evaluation-and-development-boards/lpcxpresso-boards/lpcxpresso-board-for-lpc1769:OM13000)
|
||||||
|
|
||||||
|
### NXP LPC 18-43
|
||||||
|
|
||||||
|
- [Embedded Artists LPC4357 Developer Kit](http://www.embeddedartists.com/products/kits/lpc4357_kit.php)
|
||||||
|
- [Keil MCB1800 Evaluation Board](http://www.keil.com/mcb1800)
|
||||||
- [LPCXpresso18S37 Development Board](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc4000-cortex-m4/lpcxpresso18s37-development-board:OM13076)
|
- [LPCXpresso18S37 Development Board](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpc4000-cortex-m4/lpcxpresso18s37-development-board:OM13076)
|
||||||
- [LPCXpresso 51U68](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpcxpresso51u68-for-the-lpc51u68-mcus:OM40005)
|
|
||||||
- [LPCXpresso 54114](https://www.nxp.com/design/microcontrollers-developer-resources/lpcxpresso-boards/lpcxpresso54114-board:OM13089)
|
|
||||||
- [NGX LPC4330-Xplorer](https://www.nxp.com/design/designs/lpc4330-xplorer-board:OM13027)
|
- [NGX LPC4330-Xplorer](https://www.nxp.com/design/designs/lpc4330-xplorer-board:OM13027)
|
||||||
|
|
||||||
|
### NXP LPC 51
|
||||||
|
- [LPCXpresso 51U68](https://www.nxp.com/products/processors-and-microcontrollers/arm-microcontrollers/general-purpose-mcus/lpcxpresso51u68-for-the-lpc51u68-mcus:OM40005)
|
||||||
|
|
||||||
|
### NXP LPC 54
|
||||||
|
|
||||||
|
- [LPCXpresso 54114](https://www.nxp.com/design/microcontrollers-developer-resources/lpcxpresso-boards/lpcxpresso54114-board:OM13089)
|
||||||
|
|
||||||
## NXP LPC55
|
## NXP LPC55
|
||||||
|
|
||||||
- [Double M33 Express](https://www.crowdsupply.com/steiert-solutions/double-m33-express)
|
- [Double M33 Express](https://www.crowdsupply.com/steiert-solutions/double-m33-express)
|
||||||
|
|
|
@ -0,0 +1,72 @@
|
||||||
|
/*
|
||||||
|
* The MIT License (MIT)
|
||||||
|
*
|
||||||
|
* Copyright (c) 2021, Ha Thach (tinyusb.org)
|
||||||
|
*
|
||||||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||||||
|
* of this software and associated documentation files (the "Software"), to deal
|
||||||
|
* in the Software without restriction, including without limitation the rights
|
||||||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||||||
|
* copies of the Software, and to permit persons to whom the Software is
|
||||||
|
* furnished to do so, subject to the following conditions:
|
||||||
|
*
|
||||||
|
* The above copyright notice and this permission notice shall be included in
|
||||||
|
* all copies or substantial portions of the Software.
|
||||||
|
*
|
||||||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||||||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||||||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||||||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||||||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||||||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||||||
|
* THE SOFTWARE.
|
||||||
|
*
|
||||||
|
* This file is part of the TinyUSB stack.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef BOARD_H_
|
||||||
|
#define BOARD_H_
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// XTAL
|
||||||
|
#define XTAL_OscRateIn 12000000
|
||||||
|
#define XTAL_RTCOscRateIn 32768
|
||||||
|
|
||||||
|
// LED
|
||||||
|
#define LED_PORT 0
|
||||||
|
#define LED_PIN 25
|
||||||
|
|
||||||
|
// Wake Switch
|
||||||
|
#define BUTTON_PORT 0
|
||||||
|
#define BUTTON_PIN 17
|
||||||
|
|
||||||
|
#define UART_PORT LPC_USART0
|
||||||
|
|
||||||
|
static inline void board_lpc15_pinmux_swm_init(void)
|
||||||
|
{
|
||||||
|
// Pinmux
|
||||||
|
const PINMUX_GRP_T pinmuxing[] =
|
||||||
|
{
|
||||||
|
{0, 25, (IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // PIO0_25-BREAK_CTRL-RED (low enable)
|
||||||
|
{0, 13, (IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // PIO0_13-ISP_RX
|
||||||
|
{0, 18, (IOCON_MODE_INACT | IOCON_DIGMODE_EN)}, // PIO0_18-ISP_TX
|
||||||
|
{1, 11, (IOCON_MODE_PULLDOWN | IOCON_DIGMODE_EN)}, // PIO1_11-ISP_1 (VBUS)
|
||||||
|
};
|
||||||
|
|
||||||
|
// Pin Mux
|
||||||
|
Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T));
|
||||||
|
|
||||||
|
// SWIM
|
||||||
|
Chip_SWM_MovablePortPinAssign(SWM_USB_VBUS_I , 1, 11);
|
||||||
|
Chip_SWM_MovablePortPinAssign(SWM_UART0_RXD_I, 0, 13);
|
||||||
|
Chip_SWM_MovablePortPinAssign(SWM_UART0_TXD_O, 0, 18);
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif
|
|
@ -0,0 +1,6 @@
|
||||||
|
LD_FILE = $(BOARD_PATH)/lpc1549.ld
|
||||||
|
|
||||||
|
JLINK_DEVICE = LPC1549
|
||||||
|
|
||||||
|
# flash using pyocd
|
||||||
|
flash: flash-jlink
|
|
@ -25,7 +25,8 @@
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include "chip.h"
|
#include "chip.h"
|
||||||
#include "../board.h"
|
#include "bsp/board.h"
|
||||||
|
#include "board.h"
|
||||||
|
|
||||||
//--------------------------------------------------------------------+
|
//--------------------------------------------------------------------+
|
||||||
// Forward USB interrupt events to TinyUSB IRQ Handler
|
// Forward USB interrupt events to TinyUSB IRQ Handler
|
||||||
|
@ -38,33 +39,21 @@ void USB_IRQHandler(void)
|
||||||
//--------------------------------------------------------------------+
|
//--------------------------------------------------------------------+
|
||||||
// MACRO TYPEDEF CONSTANT ENUM
|
// MACRO TYPEDEF CONSTANT ENUM
|
||||||
//--------------------------------------------------------------------+
|
//--------------------------------------------------------------------+
|
||||||
#define LED_PORT 0
|
|
||||||
#define LED_PIN 25
|
|
||||||
|
|
||||||
// Wake Switch
|
|
||||||
#define BUTTON_PORT 0
|
|
||||||
#define BUTTON_PIN 17
|
|
||||||
|
|
||||||
/* System oscillator rate and RTC oscillator rate */
|
/* System oscillator rate and RTC oscillator rate */
|
||||||
const uint32_t OscRateIn = 12000000;
|
const uint32_t OscRateIn = XTAL_OscRateIn;
|
||||||
const uint32_t RTCOscRateIn = 32768;
|
const uint32_t RTCOscRateIn = XTAL_RTCOscRateIn;
|
||||||
|
|
||||||
/* Pin muxing table, only items that need changing from their default pin
|
|
||||||
state are in this table. */
|
|
||||||
static const PINMUX_GRP_T pinmuxing[] =
|
|
||||||
{
|
|
||||||
{1, 11, (IOCON_MODE_PULLDOWN | IOCON_DIGMODE_EN)}, /* PIO1_11-ISP_1 (VBUS) */
|
|
||||||
};
|
|
||||||
|
|
||||||
// Invoked by startup code
|
// Invoked by startup code
|
||||||
void SystemInit(void)
|
void SystemInit(void)
|
||||||
{
|
{
|
||||||
|
Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_SRAM1);
|
||||||
|
Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_SRAM2);
|
||||||
Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON);
|
Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_IOCON);
|
||||||
Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_SWM);
|
Chip_Clock_EnablePeriphClock(SYSCTL_CLOCK_SWM);
|
||||||
Chip_SYSCTL_PeriphReset(RESET_IOCON);
|
Chip_SYSCTL_PeriphReset(RESET_IOCON);
|
||||||
|
|
||||||
// Pin Mux
|
board_lpc15_pinmux_swm_init();
|
||||||
Chip_IOCON_SetPinMuxing(LPC_IOCON, pinmuxing, sizeof(pinmuxing) / sizeof(PINMUX_GRP_T));
|
|
||||||
|
|
||||||
Chip_SetupXtalClocking();
|
Chip_SetupXtalClocking();
|
||||||
}
|
}
|
||||||
|
@ -73,10 +62,10 @@ void board_init(void)
|
||||||
{
|
{
|
||||||
SystemCoreClockUpdate();
|
SystemCoreClockUpdate();
|
||||||
|
|
||||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
|
||||||
// 1ms tick timer
|
// 1ms tick timer
|
||||||
SysTick_Config(SystemCoreClock / 1000);
|
SysTick_Config(SystemCoreClock / 1000);
|
||||||
#elif CFG_TUSB_OS == OPT_OS_FREERTOS
|
|
||||||
|
#if CFG_TUSB_OS == OPT_OS_FREERTOS
|
||||||
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
|
// If freeRTOS is used, IRQ priority is limit by max syscall ( smaller is higher )
|
||||||
NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
|
NVIC_SetPriority(USB0_IRQn, configLIBRARY_MAX_SYSCALL_INTERRUPT_PRIORITY );
|
||||||
#endif
|
#endif
|
||||||
|
@ -89,8 +78,15 @@ void board_init(void)
|
||||||
// Button
|
// Button
|
||||||
Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN);
|
Chip_GPIO_SetPinDIRInput(LPC_GPIO, BUTTON_PORT, BUTTON_PIN);
|
||||||
|
|
||||||
|
// UART
|
||||||
|
Chip_Clock_SetUARTBaseClockRate(Chip_Clock_GetMainClockRate(), false);
|
||||||
|
Chip_UART_Init(UART_PORT);
|
||||||
|
Chip_UART_ConfigData(UART_PORT, UART_CFG_DATALEN_8 | UART_CFG_PARITY_NONE | UART_CFG_STOPLEN_1);
|
||||||
|
Chip_UART_SetBaud(UART_PORT, CFG_BOARD_UART_BAUDRATE);
|
||||||
|
Chip_UART_Enable(UART_PORT);
|
||||||
|
Chip_UART_TXEnable(UART_PORT);
|
||||||
|
|
||||||
// USB: Setup PLL clock, and power
|
// USB: Setup PLL clock, and power
|
||||||
Chip_SWM_MovablePortPinAssign(SWM_USB_VBUS_I, 1, 11);
|
|
||||||
Chip_USB_Init();
|
Chip_USB_Init();
|
||||||
}
|
}
|
||||||
|
|
||||||
|
@ -98,19 +94,6 @@ void board_init(void)
|
||||||
// Board porting API
|
// Board porting API
|
||||||
//--------------------------------------------------------------------+
|
//--------------------------------------------------------------------+
|
||||||
|
|
||||||
#if CFG_TUSB_OS == OPT_OS_NONE
|
|
||||||
volatile uint32_t system_ticks = 0;
|
|
||||||
void SysTick_Handler (void)
|
|
||||||
{
|
|
||||||
system_ticks++;
|
|
||||||
}
|
|
||||||
|
|
||||||
uint32_t board_millis(void)
|
|
||||||
{
|
|
||||||
return system_ticks;
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
||||||
void board_led_write(bool state)
|
void board_led_write(bool state)
|
||||||
{
|
{
|
||||||
Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state);
|
Chip_GPIO_SetPinState(LPC_GPIO, LED_PORT, LED_PIN, state);
|
||||||
|
@ -130,6 +113,18 @@ int board_uart_read(uint8_t* buf, int len)
|
||||||
|
|
||||||
int board_uart_write(void const * buf, int len)
|
int board_uart_write(void const * buf, int len)
|
||||||
{
|
{
|
||||||
(void) buf; (void) len;
|
return Chip_UART_SendBlocking(UART_PORT, buf, len);
|
||||||
return 0;
|
|
||||||
}
|
}
|
||||||
|
|
||||||
|
#if CFG_TUSB_OS == OPT_OS_NONE
|
||||||
|
volatile uint32_t system_ticks = 0;
|
||||||
|
void SysTick_Handler (void)
|
||||||
|
{
|
||||||
|
system_ticks++;
|
||||||
|
}
|
||||||
|
|
||||||
|
uint32_t board_millis(void)
|
||||||
|
{
|
||||||
|
return system_ticks;
|
||||||
|
}
|
||||||
|
#endif
|
|
@ -1,5 +1,7 @@
|
||||||
DEPS_SUBMODULES += hw/mcu/nxp
|
DEPS_SUBMODULES += hw/mcu/nxp
|
||||||
|
|
||||||
|
include $(TOP)/$(BOARD_PATH)/board.mk
|
||||||
|
|
||||||
CFLAGS += \
|
CFLAGS += \
|
||||||
-flto \
|
-flto \
|
||||||
-mthumb \
|
-mthumb \
|
||||||
|
@ -17,9 +19,6 @@ CFLAGS += -Wno-error=strict-prototypes -Wno-error=unused-parameter -Wno-error=un
|
||||||
|
|
||||||
MCU_DIR = hw/mcu/nxp/lpcopen/lpc15xx/lpc_chip_15xx
|
MCU_DIR = hw/mcu/nxp/lpcopen/lpc15xx/lpc_chip_15xx
|
||||||
|
|
||||||
# All source paths should be relative to the top level.
|
|
||||||
LD_FILE = hw/bsp/$(BOARD)/lpc1549.ld
|
|
||||||
|
|
||||||
SRC_C += \
|
SRC_C += \
|
||||||
src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \
|
src/portable/nxp/lpc_ip3511/dcd_lpc_ip3511.c \
|
||||||
$(MCU_DIR)/../gcc/cr_startup_lpc15xx.c \
|
$(MCU_DIR)/../gcc/cr_startup_lpc15xx.c \
|
||||||
|
@ -29,16 +28,12 @@ SRC_C += \
|
||||||
$(MCU_DIR)/src/iocon_15xx.c \
|
$(MCU_DIR)/src/iocon_15xx.c \
|
||||||
$(MCU_DIR)/src/swm_15xx.c \
|
$(MCU_DIR)/src/swm_15xx.c \
|
||||||
$(MCU_DIR)/src/sysctl_15xx.c \
|
$(MCU_DIR)/src/sysctl_15xx.c \
|
||||||
|
$(MCU_DIR)/src/uart_15xx.c \
|
||||||
$(MCU_DIR)/src/sysinit_15xx.c
|
$(MCU_DIR)/src/sysinit_15xx.c
|
||||||
|
|
||||||
INC += \
|
INC += \
|
||||||
|
$(TOP)/$(BOARD_PATH) \
|
||||||
$(TOP)/$(MCU_DIR)/inc
|
$(TOP)/$(MCU_DIR)/inc
|
||||||
|
|
||||||
# For freeRTOS port source
|
# For freeRTOS port source
|
||||||
FREERTOS_PORT = ARM_CM3
|
FREERTOS_PORT = ARM_CM3
|
||||||
|
|
||||||
# For flash-jlink target
|
|
||||||
JLINK_DEVICE = LPC1549
|
|
||||||
|
|
||||||
# flash using jlink
|
|
||||||
flash: flash-jlink
|
|
Loading…
Reference in New Issue