add device_os_none keil project for all boards
This commit is contained in:
hathach
parent
8de6ee22dc
commit
275e834bbe
|
|
@ -57,8 +57,8 @@
|
|||
#endif
|
||||
|
||||
#include "LPC11Uxx.h"
|
||||
#include "lpc11uxx/gpio.h"
|
||||
#include "lpc11uxx/uart.h"
|
||||
#include "lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_gpio.h"
|
||||
#include "lpc11uxx/LPC11Uxx_DriverLib/lpc11uxx_uart.h"
|
||||
|
||||
#define CFG_PRINTF_TARGET PRINTF_TARGET_SEMIHOST
|
||||
|
||||
|
|
|
|||
|
|
@ -20,7 +20,7 @@
|
|||
* use without further testing or modification.
|
||||
****************************************************************************/
|
||||
#include "LPC11Uxx.h" /* LPC11Uxx Peripheral Registers */
|
||||
#include "gpio.h"
|
||||
#include "lpc11uxx_gpio.h"
|
||||
|
||||
volatile uint32_t flex_int0_counter = 0;
|
||||
volatile uint32_t flex_int1_counter = 0;
|
||||
|
|
@ -11,7 +11,7 @@
|
|||
|
||||
#include <stdint.h>
|
||||
#include "LPC11Uxx.h"
|
||||
#include "uart.h"
|
||||
#include "lpc11uxx_uart.h"
|
||||
|
||||
volatile uint32_t UARTStatus;
|
||||
volatile uint8_t UARTTxEmpty = 1;
|
||||
|
|
@ -0,0 +1,287 @@
|
|||
;/**************************************************************************//**
|
||||
; * @file startup_LPC17xx.s
|
||||
; * @brief CMSIS Cortex-M3 Core Device Startup File for
|
||||
; * NXP LPC17xx Device Series
|
||||
; * @version V1.10
|
||||
; * @date 06. April 2011
|
||||
; *
|
||||
; * @note
|
||||
; * Copyright (C) 2009-2011 ARM Limited. All rights reserved.
|
||||
; *
|
||||
; * @par
|
||||
; * ARM Limited (ARM) is supplying this software for use with Cortex-M
|
||||
; * processor based microcontrollers. This file can be freely distributed
|
||||
; * within development tools that are supporting such ARM based processors.
|
||||
; *
|
||||
; * @par
|
||||
; * THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
|
||||
; * OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
|
||||
; * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
|
||||
; * ARM SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
|
||||
; * CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
|
||||
; *
|
||||
; ******************************************************************************/
|
||||
|
||||
; *------- <<< Use Configuration Wizard in Context Menu >>> ------------------
|
||||
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000200
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000000
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WDT_IRQHandler ; 16: Watchdog Timer
|
||||
DCD TIMER0_IRQHandler ; 17: Timer0
|
||||
DCD TIMER1_IRQHandler ; 18: Timer1
|
||||
DCD TIMER2_IRQHandler ; 19: Timer2
|
||||
DCD TIMER3_IRQHandler ; 20: Timer3
|
||||
DCD UART0_IRQHandler ; 21: UART0
|
||||
DCD UART1_IRQHandler ; 22: UART1
|
||||
DCD UART2_IRQHandler ; 23: UART2
|
||||
DCD UART3_IRQHandler ; 24: UART3
|
||||
DCD PWM1_IRQHandler ; 25: PWM1
|
||||
DCD I2C0_IRQHandler ; 26: I2C0
|
||||
DCD I2C1_IRQHandler ; 27: I2C1
|
||||
DCD I2C2_IRQHandler ; 28: I2C2
|
||||
DCD SPI_IRQHandler ; 29: SPI
|
||||
DCD SSP0_IRQHandler ; 30: SSP0
|
||||
DCD SSP1_IRQHandler ; 31: SSP1
|
||||
DCD PLL0_IRQHandler ; 32: PLL0 Lock (Main PLL)
|
||||
DCD RTC_IRQHandler ; 33: Real Time Clock
|
||||
DCD EINT0_IRQHandler ; 34: External Interrupt 0
|
||||
DCD EINT1_IRQHandler ; 35: External Interrupt 1
|
||||
DCD EINT2_IRQHandler ; 36: External Interrupt 2
|
||||
DCD EINT3_IRQHandler ; 37: External Interrupt 3
|
||||
DCD ADC_IRQHandler ; 38: A/D Converter
|
||||
DCD BOD_IRQHandler ; 39: Brown-Out Detect
|
||||
DCD USB_IRQHandler ; 40: USB
|
||||
DCD CAN_IRQHandler ; 41: CAN
|
||||
DCD DMA_IRQHandler ; 42: General Purpose DMA
|
||||
DCD I2S_IRQHandler ; 43: I2S
|
||||
DCD ENET_IRQHandler ; 44: Ethernet
|
||||
DCD RIT_IRQHandler ; 45: Repetitive Interrupt Timer
|
||||
DCD MCPWM_IRQHandler ; 46: Motor Control PWM
|
||||
DCD QEI_IRQHandler ; 47: Quadrature Encoder Interface
|
||||
DCD PLL1_IRQHandler ; 48: PLL1 Lock (USB PLL)
|
||||
DCD USBActivity_IRQHandler ; 49: USB Activity interrupt to wakeup
|
||||
DCD CANActivity_IRQHandler ; 50: CAN Activity interrupt to wakeup
|
||||
|
||||
|
||||
IF :LNOT::DEF:NO_CRP
|
||||
AREA |.ARM.__at_0x02FC|, CODE, READONLY
|
||||
CRP_Key DCD 0xFFFFFFFF
|
||||
ENDIF
|
||||
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
|
||||
; Reset Handler
|
||||
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT SystemInit
|
||||
IMPORT __main
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WDT_IRQHandler [WEAK]
|
||||
EXPORT TIMER0_IRQHandler [WEAK]
|
||||
EXPORT TIMER1_IRQHandler [WEAK]
|
||||
EXPORT TIMER2_IRQHandler [WEAK]
|
||||
EXPORT TIMER3_IRQHandler [WEAK]
|
||||
EXPORT UART0_IRQHandler [WEAK]
|
||||
EXPORT UART1_IRQHandler [WEAK]
|
||||
EXPORT UART2_IRQHandler [WEAK]
|
||||
EXPORT UART3_IRQHandler [WEAK]
|
||||
EXPORT PWM1_IRQHandler [WEAK]
|
||||
EXPORT I2C0_IRQHandler [WEAK]
|
||||
EXPORT I2C1_IRQHandler [WEAK]
|
||||
EXPORT I2C2_IRQHandler [WEAK]
|
||||
EXPORT SPI_IRQHandler [WEAK]
|
||||
EXPORT SSP0_IRQHandler [WEAK]
|
||||
EXPORT SSP1_IRQHandler [WEAK]
|
||||
EXPORT PLL0_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT EINT0_IRQHandler [WEAK]
|
||||
EXPORT EINT1_IRQHandler [WEAK]
|
||||
EXPORT EINT2_IRQHandler [WEAK]
|
||||
EXPORT EINT3_IRQHandler [WEAK]
|
||||
EXPORT ADC_IRQHandler [WEAK]
|
||||
EXPORT BOD_IRQHandler [WEAK]
|
||||
EXPORT USB_IRQHandler [WEAK]
|
||||
EXPORT CAN_IRQHandler [WEAK]
|
||||
EXPORT DMA_IRQHandler [WEAK]
|
||||
EXPORT I2S_IRQHandler [WEAK]
|
||||
EXPORT ENET_IRQHandler [WEAK]
|
||||
EXPORT RIT_IRQHandler [WEAK]
|
||||
EXPORT MCPWM_IRQHandler [WEAK]
|
||||
EXPORT QEI_IRQHandler [WEAK]
|
||||
EXPORT PLL1_IRQHandler [WEAK]
|
||||
EXPORT USBActivity_IRQHandler [WEAK]
|
||||
EXPORT CANActivity_IRQHandler [WEAK]
|
||||
|
||||
WDT_IRQHandler
|
||||
TIMER0_IRQHandler
|
||||
TIMER1_IRQHandler
|
||||
TIMER2_IRQHandler
|
||||
TIMER3_IRQHandler
|
||||
UART0_IRQHandler
|
||||
UART1_IRQHandler
|
||||
UART2_IRQHandler
|
||||
UART3_IRQHandler
|
||||
PWM1_IRQHandler
|
||||
I2C0_IRQHandler
|
||||
I2C1_IRQHandler
|
||||
I2C2_IRQHandler
|
||||
SPI_IRQHandler
|
||||
SSP0_IRQHandler
|
||||
SSP1_IRQHandler
|
||||
PLL0_IRQHandler
|
||||
RTC_IRQHandler
|
||||
EINT0_IRQHandler
|
||||
EINT1_IRQHandler
|
||||
EINT2_IRQHandler
|
||||
EINT3_IRQHandler
|
||||
ADC_IRQHandler
|
||||
BOD_IRQHandler
|
||||
USB_IRQHandler
|
||||
CAN_IRQHandler
|
||||
DMA_IRQHandler
|
||||
I2S_IRQHandler
|
||||
ENET_IRQHandler
|
||||
RIT_IRQHandler
|
||||
MCPWM_IRQHandler
|
||||
QEI_IRQHandler
|
||||
PLL1_IRQHandler
|
||||
USBActivity_IRQHandler
|
||||
CANActivity_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
|
||||
ALIGN
|
||||
|
||||
|
||||
; User Initial Stack & Heap
|
||||
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
|
||||
END
|
||||
|
|
@ -322,6 +322,7 @@
|
|||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/bsp/lpc175x_6x/LPC17xx_DriverLib/include}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/bsp}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/tinyusb}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/src}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}""/>
|
||||
</option>
|
||||
<option id="gnu.c.compiler.option.include.files.946392624" name="Include files (-include)" superClass="gnu.c.compiler.option.include.files"/>
|
||||
|
|
@ -472,8 +473,8 @@
|
|||
<storageModule moduleId="com.crt.config">
|
||||
<projectStorage><?xml version="1.0" encoding="UTF-8"?>
|
||||
<TargetConfig>
|
||||
<Properties property_0="" property_2="LPC175x_6x_512.cfx" property_3="NXP" property_4="LPC1769" property_count="5" version="1"/>
|
||||
<infoList vendor="NXP"><info chip="LPC1769" flash_driver="LPC175x_6x_512.cfx" match_id="0x26113F37" name="LPC1769" package="lpc17_lqfp100.xml" stub="crt_emu_cm3_nxp"><chip><name>LPC1769</name>
|
||||
<Properties property_0="" property_3="NXP" property_4="LPC1769" property_count="5" version="1"/>
|
||||
<infoList vendor="NXP"><info chip="LPC1769" match_id="0x26113F37" name="LPC1769" package="lpc17_lqfp100.xml"><chip><name>LPC1769</name>
|
||||
<family>LPC17xx</family>
|
||||
<vendor>NXP (formerly Philips)</vendor>
|
||||
<reset board="None" core="Real" sys="Real"/>
|
||||
|
|
@ -481,59 +482,59 @@
|
|||
<memory can_program="true" id="Flash" is_ro="true" type="Flash"/>
|
||||
<memory id="RAM" type="RAM"/>
|
||||
<memory id="Periph" is_volatile="true" type="Peripheral"/>
|
||||
<memoryInstance derived_from="Flash" id="MFlash512" location="0x00000000" size="0x80000"/>
|
||||
<memoryInstance derived_from="Flash" id="MFlash512" location="0x0" size="0x80000"/>
|
||||
<memoryInstance derived_from="RAM" id="RamLoc32" location="0x10000000" size="0x8000"/>
|
||||
<memoryInstance derived_from="RAM" id="RamAHB32" location="0x2007c000" size="0x8000"/>
|
||||
<prog_flash blocksz="0x1000" location="0" maxprgbuff="0x1000" progwithcode="TRUE" size="0x10000"/>
|
||||
<prog_flash blocksz="0x8000" location="0x10000" maxprgbuff="0x1000" progwithcode="TRUE" size="0x70000"/>
|
||||
<peripheralInstance derived_from="LPC17_NVIC" determined="infoFile" id="NVIC" location="0xE000E000"/>
|
||||
<peripheralInstance derived_from="TIMER" determined="infoFile" enable="SYSCTL.PCONP.PCTIM0&amp;0x1" id="TIMER0" location="0x40004000"/>
|
||||
<peripheralInstance derived_from="TIMER" determined="infoFile" enable="SYSCTL.PCONP.PCTIM1&amp;0x1" id="TIMER1" location="0x40008000"/>
|
||||
<peripheralInstance derived_from="TIMER" determined="infoFile" enable="SYSCTL.PCONP.PCTIM2&amp;0x1" id="TIMER2" location="0x40090000"/>
|
||||
<peripheralInstance derived_from="TIMER" determined="infoFile" enable="SYSCTL.PCONP.PCTIM3&amp;0x1" id="TIMER3" location="0x40094000"/>
|
||||
<peripheralInstance derived_from="LPC17_RIT" determined="infoFile" enable="SYSCTL.PCONP.PCRIT&amp;0x1" id="RIT" location="0x400B0000"/>
|
||||
<peripheralInstance derived_from="FGPIO" determined="infoFile" enable="SYSCTL.PCONP.PCGPIO&amp;0x1" id="GPIO0" location="0x2009C000"/>
|
||||
<peripheralInstance derived_from="FGPIO" determined="infoFile" enable="SYSCTL.PCONP.PCGPIO&amp;0x1" id="GPIO1" location="0x2009C020"/>
|
||||
<peripheralInstance derived_from="FGPIO" determined="infoFile" enable="SYSCTL.PCONP.PCGPIO&amp;0x1" id="GPIO2" location="0x2009C040"/>
|
||||
<peripheralInstance derived_from="FGPIO" determined="infoFile" enable="SYSCTL.PCONP.PCGPIO&amp;0x1" id="GPIO3" location="0x2009C060"/>
|
||||
<peripheralInstance derived_from="FGPIO" determined="infoFile" enable="SYSCTL.PCONP.PCGPIO&amp;0x1" id="GPIO4" location="0x2009C080"/>
|
||||
<peripheralInstance derived_from="LPC17_I2S" determined="infoFile" enable="SYSCTL.PCONP&amp;0x08000000" id="I2S" location="0x400A8000"/>
|
||||
<peripheralInstance derived_from="LPC17_SYSCTL" determined="infoFile" id="SYSCTL" location="0x400FC000"/>
|
||||
<peripheralInstance derived_from="LPC17_DAC" determined="infoFile" enable="PCB.PINSEL1.P0_26&amp;0x2=2" id="DAC" location="0x4008C000"/>
|
||||
<peripheralInstance derived_from="LPC17xx_UART" determined="infoFile" enable="SYSCTL.PCONP.PCUART0&amp;0x1" id="UART0" location="0x4000C000"/>
|
||||
<peripheralInstance derived_from="LPC17xx_UART_MODEM" determined="infoFile" enable="SYSCTL.PCONP.PCUART1&amp;0x1" id="UART1" location="0x40010000"/>
|
||||
<peripheralInstance derived_from="LPC17xx_UART" determined="infoFile" enable="SYSCTL.PCONP.PCUART2&amp;0x1" id="UART2" location="0x40098000"/>
|
||||
<peripheralInstance derived_from="LPC17xx_UART" determined="infoFile" enable="SYSCTL.PCONP.PCUART3&amp;0x1" id="UART3" location="0x4009C000"/>
|
||||
<peripheralInstance derived_from="SPI" determined="infoFile" enable="SYSCTL.PCONP.PCSPI&amp;0x1" id="SPI" location="0x40020000"/>
|
||||
<peripheralInstance derived_from="LPC17_SSP" determined="infoFile" enable="SYSCTL.PCONP.PCSSP0&amp;0x1" id="SSP0" location="0x40088000"/>
|
||||
<peripheralInstance derived_from="LPC17_SSP" determined="infoFile" enable="SYSCTL.PCONP.PCSSP1&amp;0x1" id="SSP1" location="0x40030000"/>
|
||||
<peripheralInstance derived_from="LPC17_ADC" determined="infoFile" enable="SYSCTL.PCONP.PCAD&amp;0x1" id="ADC" location="0x40034000"/>
|
||||
<peripheralInstance derived_from="LPC17_USBINTST" determined="infoFile" enable="USBCLKCTL.USBClkCtrl&amp;0x12" id="USBINTSTAT" location="0x400fc1c0"/>
|
||||
<peripheralInstance derived_from="LPC17_USB_CLK_CTL" determined="infoFile" id="USBCLKCTL" location="0x5000cff4"/>
|
||||
<peripheralInstance derived_from="LPC17_USBDEV" determined="infoFile" enable="USBCLKCTL.USBClkSt&amp;0x12=0x12" id="USBDEV" location="0x5000C200"/>
|
||||
<peripheralInstance derived_from="LPC17_PWM" determined="infoFile" enable="SYSCTL.PCONP.PWM1&amp;0x1" id="PWM" location="0x40018000"/>
|
||||
<peripheralInstance derived_from="LPC17_I2C" determined="infoFile" enable="SYSCTL.PCONP.PCI2C0&amp;0x1" id="I2C0" location="0x4001C000"/>
|
||||
<peripheralInstance derived_from="LPC17_I2C" determined="infoFile" enable="SYSCTL.PCONP.PCI2C1&amp;0x1" id="I2C1" location="0x4005C000"/>
|
||||
<peripheralInstance derived_from="LPC17_I2C" determined="infoFile" enable="SYSCTL.PCONP.PCI2C2&amp;0x1" id="I2C2" location="0x400A0000"/>
|
||||
<peripheralInstance derived_from="LPC17_DMA" determined="infoFile" enable="SYSCTL.PCONP.PCGPDMA&amp;0x1" id="DMA" location="0x50004000"/>
|
||||
<peripheralInstance derived_from="LPC17_ENET" determined="infoFile" enable="SYSCTL.PCONP.PCENET&amp;0x1" id="ENET" location="0x50000000"/>
|
||||
<peripheralInstance derived_from="CM3_DCR" determined="infoFile" id="DCR" location="0xE000EDF0"/>
|
||||
<peripheralInstance derived_from="LPC17_PCB" determined="infoFile" id="PCB" location="0x4002c000"/>
|
||||
<peripheralInstance derived_from="LPC17_QEI" determined="infoFile" enable="SYSCTL.PCONP.PCQEI&amp;0x1" id="QEI" location="0x400bc000"/>
|
||||
<peripheralInstance derived_from="LPC17_USBHOST" determined="infoFile" enable="USBCLKCTL.USBClkSt&amp;0x11=0x11" id="USBHOST" location="0x5000C000"/>
|
||||
<peripheralInstance derived_from="LPC17_USBOTG" determined="infoFile" enable="USBCLKCTL.USBClkSt&amp;0x1c=0x1c" id="USBOTG" location="0x5000C000"/>
|
||||
<peripheralInstance derived_from="LPC17_RTC" determined="infoFile" enable="SYSCTL.PCONP.PCRTC&amp;0x1" id="RTC" location="0x40024000"/>
|
||||
<peripheralInstance derived_from="MPU" determined="infoFile" id="MPU" location="0xE000ED90"/>
|
||||
<peripheralInstance derived_from="LPC1x_WDT" determined="infoFile" id="WDT" location="0x40000000"/>
|
||||
<peripheralInstance derived_from="LPC17_FLASHCFG" determined="infoFile" id="FLASHACCEL" location="0x400FC000"/>
|
||||
<peripheralInstance derived_from="GPIO_INT" determined="infoFile" id="GPIOINTMAP" location="0x40028080"/>
|
||||
<peripheralInstance derived_from="LPC17_CANAFR" determined="infoFile" enable="SYSCTL.PCONP.PCCAN1&amp;0x1|SYSCTL.PCONP.PCCAN2&amp;0x1" id="CANAFR" location="0x4003C000"/>
|
||||
<peripheralInstance derived_from="LPC17_CANCEN" determined="infoFile" enable="SYSCTL.PCONP.PCCAN1&amp;0x1|SYSCTL.PCONP.PCCAN2&amp;0x1" id="CANCEN" location="0x40040000"/>
|
||||
<peripheralInstance derived_from="LPC17_CANWAKESLEEP" determined="infoFile" id="CANWAKESLEEP" location="0x400FC110"/>
|
||||
<peripheralInstance derived_from="LPC17_CANCON" determined="infoFile" enable="SYSCTL.PCONP.PCCAN1&amp;0x1" id="CANCON1" location="0x40044000"/>
|
||||
<peripheralInstance derived_from="LPC17_CANCON" determined="infoFile" enable="SYSCTL.PCONP.PCCAN2&amp;0x1" id="CANCON2" location="0x40048000"/>
|
||||
<peripheralInstance derived_from="LPC17_MCPWM" determined="infoFile" enable="SYSCTL.PCONP.PCMCPWM&amp;0x1" id="MCPWM" location="0x400B8000"/>
|
||||
<peripheralInstance derived_from="LPC17_FMC" determined="infoFile" id="FMC" location="0x40084000"/>
|
||||
<peripheralInstance derived_from="LPC17_NVIC" id="NVIC" location="0xE000E000"/>
|
||||
<peripheralInstance derived_from="TIMER" enable="SYSCTL.PCONP.PCTIM0&amp;0x1" id="TIMER0" location="0x40004000"/>
|
||||
<peripheralInstance derived_from="TIMER" enable="SYSCTL.PCONP.PCTIM1&amp;0x1" id="TIMER1" location="0x40008000"/>
|
||||
<peripheralInstance derived_from="TIMER" enable="SYSCTL.PCONP.PCTIM2&amp;0x1" id="TIMER2" location="0x40090000"/>
|
||||
<peripheralInstance derived_from="TIMER" enable="SYSCTL.PCONP.PCTIM3&amp;0x1" id="TIMER3" location="0x40094000"/>
|
||||
<peripheralInstance derived_from="LPC17_RIT" enable="SYSCTL.PCONP.PCRIT&amp;0x1" id="RIT" location="0x400B0000"/>
|
||||
<peripheralInstance derived_from="FGPIO" enable="SYSCTL.PCONP.PCGPIO&amp;0x1" id="GPIO0" location="0x2009C000"/>
|
||||
<peripheralInstance derived_from="FGPIO" enable="SYSCTL.PCONP.PCGPIO&amp;0x1" id="GPIO1" location="0x2009C020"/>
|
||||
<peripheralInstance derived_from="FGPIO" enable="SYSCTL.PCONP.PCGPIO&amp;0x1" id="GPIO2" location="0x2009C040"/>
|
||||
<peripheralInstance derived_from="FGPIO" enable="SYSCTL.PCONP.PCGPIO&amp;0x1" id="GPIO3" location="0x2009C060"/>
|
||||
<peripheralInstance derived_from="FGPIO" enable="SYSCTL.PCONP.PCGPIO&amp;0x1" id="GPIO4" location="0x2009C080"/>
|
||||
<peripheralInstance derived_from="LPC17_I2S" enable="SYSCTL.PCONP&amp;0x08000000" id="I2S" location="0x400A8000"/>
|
||||
<peripheralInstance derived_from="LPC17_SYSCTL" id="SYSCTL" location="0x400FC000"/>
|
||||
<peripheralInstance derived_from="LPC17_DAC" enable="PCB.PINSEL1.P0_26&amp;0x2=2" id="DAC" location="0x4008C000"/>
|
||||
<peripheralInstance derived_from="LPC17xx_UART" enable="SYSCTL.PCONP.PCUART0&amp;0x1" id="UART0" location="0x4000C000"/>
|
||||
<peripheralInstance derived_from="LPC17xx_UART_MODEM" enable="SYSCTL.PCONP.PCUART1&amp;0x1" id="UART1" location="0x40010000"/>
|
||||
<peripheralInstance derived_from="LPC17xx_UART" enable="SYSCTL.PCONP.PCUART2&amp;0x1" id="UART2" location="0x40098000"/>
|
||||
<peripheralInstance derived_from="LPC17xx_UART" enable="SYSCTL.PCONP.PCUART3&amp;0x1" id="UART3" location="0x4009C000"/>
|
||||
<peripheralInstance derived_from="SPI" enable="SYSCTL.PCONP.PCSPI&amp;0x1" id="SPI" location="0x40020000"/>
|
||||
<peripheralInstance derived_from="LPC17_SSP" enable="SYSCTL.PCONP.PCSSP0&amp;0x1" id="SSP0" location="0x40088000"/>
|
||||
<peripheralInstance derived_from="LPC17_SSP" enable="SYSCTL.PCONP.PCSSP1&amp;0x1" id="SSP1" location="0x40030000"/>
|
||||
<peripheralInstance derived_from="LPC17_ADC" enable="SYSCTL.PCONP.PCAD&amp;0x1" id="ADC" location="0x40034000"/>
|
||||
<peripheralInstance derived_from="LPC17_USBINTST" enable="USBCLKCTL.USBClkCtrl&amp;0x12" id="USBINTSTAT" location="0x400fc1c0"/>
|
||||
<peripheralInstance derived_from="LPC17_USB_CLK_CTL" id="USBCLKCTL" location="0x5000cff4"/>
|
||||
<peripheralInstance derived_from="LPC17_USBDEV" enable="USBCLKCTL.USBClkSt&amp;0x12=0x12" id="USBDEV" location="0x5000C200"/>
|
||||
<peripheralInstance derived_from="LPC17_PWM" enable="SYSCTL.PCONP.PWM1&amp;0x1" id="PWM" location="0x40018000"/>
|
||||
<peripheralInstance derived_from="LPC17_I2C" enable="SYSCTL.PCONP.PCI2C0&amp;0x1" id="I2C0" location="0x4001C000"/>
|
||||
<peripheralInstance derived_from="LPC17_I2C" enable="SYSCTL.PCONP.PCI2C1&amp;0x1" id="I2C1" location="0x4005C000"/>
|
||||
<peripheralInstance derived_from="LPC17_I2C" enable="SYSCTL.PCONP.PCI2C2&amp;0x1" id="I2C2" location="0x400A0000"/>
|
||||
<peripheralInstance derived_from="LPC17_DMA" enable="SYSCTL.PCONP.PCGPDMA&amp;0x1" id="DMA" location="0x50004000"/>
|
||||
<peripheralInstance derived_from="LPC17_ENET" enable="SYSCTL.PCONP.PCENET&amp;0x1" id="ENET" location="0x50000000"/>
|
||||
<peripheralInstance derived_from="CM3_DCR" id="DCR" location="0xE000EDF0"/>
|
||||
<peripheralInstance derived_from="LPC17_PCB" id="PCB" location="0x4002c000"/>
|
||||
<peripheralInstance derived_from="LPC17_QEI" enable="SYSCTL.PCONP.PCQEI&amp;0x1" id="QEI" location="0x400bc000"/>
|
||||
<peripheralInstance derived_from="LPC17_USBHOST" enable="USBCLKCTL.USBClkSt&amp;0x11=0x11" id="USBHOST" location="0x5000C000"/>
|
||||
<peripheralInstance derived_from="LPC17_USBOTG" enable="USBCLKCTL.USBClkSt&amp;0x1c=0x1c" id="USBOTG" location="0x5000C000"/>
|
||||
<peripheralInstance derived_from="LPC17_RTC" enable="SYSCTL.PCONP.PCRTC&amp;0x1" id="RTC" location="0x40024000"/>
|
||||
<peripheralInstance derived_from="MPU" id="MPU" location="0xE000ED90"/>
|
||||
<peripheralInstance derived_from="LPC1x_WDT" id="WDT" location="0x40000000"/>
|
||||
<peripheralInstance derived_from="LPC17_FLASHCFG" id="FLASHACCEL" location="0x400FC000"/>
|
||||
<peripheralInstance derived_from="GPIO_INT" id="GPIOINTMAP" location="0x40028080"/>
|
||||
<peripheralInstance derived_from="LPC17_CANAFR" enable="SYSCTL.PCONP.PCCAN1&amp;0x1|SYSCTL.PCONP.PCCAN2&amp;0x1" id="CANAFR" location="0x4003C000"/>
|
||||
<peripheralInstance derived_from="LPC17_CANCEN" enable="SYSCTL.PCONP.PCCAN1&amp;0x1|SYSCTL.PCONP.PCCAN2&amp;0x1" id="CANCEN" location="0x40040000"/>
|
||||
<peripheralInstance derived_from="LPC17_CANWAKESLEEP" id="CANWAKESLEEP" location="0x400FC110"/>
|
||||
<peripheralInstance derived_from="LPC17_CANCON" enable="SYSCTL.PCONP.PCCAN1&amp;0x1" id="CANCON1" location="0x40044000"/>
|
||||
<peripheralInstance derived_from="LPC17_CANCON" enable="SYSCTL.PCONP.PCCAN2&amp;0x1" id="CANCON2" location="0x40048000"/>
|
||||
<peripheralInstance derived_from="LPC17_MCPWM" enable="SYSCTL.PCONP.PCMCPWM&amp;0x1" id="MCPWM" location="0x400B8000"/>
|
||||
<peripheralInstance derived_from="LPC17_FMC" id="FMC" location="0x40084000"/>
|
||||
</chip>
|
||||
<processor><name gcc_name="cortex-m3">Cortex-M3</name>
|
||||
<family>Cortex-M</family>
|
||||
|
|
|
|||
|
|
@ -85,6 +85,11 @@
|
|||
<type>2</type>
|
||||
<locationURI>PARENT-2-PROJECT_LOC/bsp</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>src</name>
|
||||
<type>2</type>
|
||||
<locationURI>PARENT-1-PROJECT_LOC/src</locationURI>
|
||||
</link>
|
||||
<link>
|
||||
<name>tinyusb</name>
|
||||
<type>2</type>
|
||||
|
|
@ -93,7 +98,7 @@
|
|||
</linkedResources>
|
||||
<filteredResources>
|
||||
<filter>
|
||||
<id>1383629800659</id>
|
||||
<id>1387876593819</id>
|
||||
<name></name>
|
||||
<type>26</type>
|
||||
<matcher>
|
||||
|
|
@ -102,7 +107,7 @@
|
|||
</matcher>
|
||||
</filter>
|
||||
<filter>
|
||||
<id>1383629800681</id>
|
||||
<id>1387876593840</id>
|
||||
<name></name>
|
||||
<type>26</type>
|
||||
<matcher>
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load Diff
|
|
@ -1,100 +0,0 @@
|
|||
#######################################################################################
|
||||
# Software License Agreement (BSD License)
|
||||
# Copyright (c) 2012, hathach (tinyusb.org)
|
||||
# All rights reserved.
|
||||
#
|
||||
# Redistribution and use in source and binary forms, with or without modification,
|
||||
# are permitted provided that the following conditions are met:
|
||||
#
|
||||
# 1. Redistributions of source code must retain the above copyright notice,
|
||||
# this list of conditions and the following disclaimer.
|
||||
# 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
# this list of conditions and the following disclaimer in the documentation
|
||||
# and/or other materials provided with the distribution.
|
||||
# 3. The name of the author may not be used to endorse or promote products
|
||||
# derived from this software without specific prior written permission.
|
||||
#
|
||||
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
|
||||
# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
|
||||
# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
|
||||
# SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
||||
# EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
|
||||
# OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
||||
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
||||
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
||||
# IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
||||
# OF SUCH DAMAGE.
|
||||
#######################################################################################
|
||||
|
||||
##################################################
|
||||
# Keyboard makefile
|
||||
##################################################
|
||||
|
||||
############ Toolchain ############
|
||||
toolchain := lpcxpresso
|
||||
CC := arm-none-eabi-gcc
|
||||
RM := rm -rf
|
||||
#AR LD
|
||||
|
||||
toolchain_def = __REDLIB__ __CODE_RED __USE_CMSIS=CMSISv2p00_LPC11Uxx
|
||||
mcu = lpc11uxx
|
||||
build_path = ../build/
|
||||
|
||||
#helper function
|
||||
rel2abs = $(shell cd $(1); pwd)
|
||||
|
||||
#path
|
||||
tinyusb_path = ../../../tinyusb
|
||||
bsp_path = ../../bsp
|
||||
cmsis_path = ../../../../CMSISv2p00_LPC11Uxx
|
||||
|
||||
build_path_abs = $(CURDIR)/$(build_path_relative)
|
||||
tinyusb_path_abs = $(CURDIR)/$(tinyusb_path)
|
||||
bsp_path_abs = $(CURDIR)/$(bsp_path)
|
||||
cmsis_path_abs = $(CURDIR)/$(cmsis_path)
|
||||
|
||||
############ Sources ############
|
||||
src = $(shell find $(CURDIR) -type f -name "*.c") $(tinyusb_src) $(bsp_src)
|
||||
objects = $(subst .c,.o,$(src))
|
||||
dependencies = $(subst .c,.d,$(src))
|
||||
|
||||
tinyusb_src = $(shell find $(tinyusb_path_abs) \( ! -name "*hal*" \) -type f -name "*.c") $(tinyusb_path_abs)/hal/hal_$(mcu).c
|
||||
bsp_src = $(shell find $(bsp_path_abs)/boards -type f -name "*.c") $(shell find $(bsp_path_abs)/$(mcu) -type f -name "*.c")
|
||||
cmsis_src = $(shell find $(cmsis_path_abs) -type f -name "*.c")
|
||||
|
||||
############ CFLAGS C Compiler Flag ##############
|
||||
#CFLAGS = $(addprefix -D,$(toolchain_def) $(macros_def)) $(addprefix -I,$(inc_path))
|
||||
|
||||
############ LDFLAGS Linker Flag ##############
|
||||
#LDFLAGS
|
||||
|
||||
############ CPPFLAGS C Preprocessor Flag ##############
|
||||
CPPFLAGS = $(addprefix -D,$(toolchain_def) $(macros_def)) $(addprefix -I,$(inc_path))
|
||||
|
||||
macros_def += BOARD=BOARD_AT86RF2XX
|
||||
macros_def += MCU=MCU_LPC11UXX
|
||||
|
||||
inc_path = $(CURDIR) $(tinyusb_path_abs) $(bsp_path_abs) $(cmsis_path_abs)/inc
|
||||
|
||||
############ Compile Rules ##############
|
||||
#%.o : %.c
|
||||
|
||||
############ Target ##############
|
||||
all: keyboard.axf
|
||||
|
||||
keyboard.axf : $(objects)
|
||||
|
||||
clean:
|
||||
-$(RM) $(objects) $(dependencies) keyboard.axf
|
||||
|
||||
.PHONY: all clean
|
||||
|
||||
############ Dependencies Generate and Inlcude ############
|
||||
ifneq ($(MAKECMDGOALS),clean)
|
||||
include $(dependencies)
|
||||
endif
|
||||
|
||||
%.d: %.c
|
||||
$(CC) -M $(CPPFLAGS) $< > $@.$$$$; \
|
||||
sed 's,\($*\)\.o[ :]*,\1.o $@ : ,g' < $@.$$$$ > $@; \
|
||||
rm -f $@.$$$$
|
||||
|
|
@ -60,8 +60,8 @@ static scsi_inquiry_data_t mscd_inquiry_data TUSB_CFG_ATTR_USBRAM =
|
|||
ATTR_USB_MIN_ALIGNMENT
|
||||
static scsi_read_capacity10_data_t mscd_read_capacity10_data TUSB_CFG_ATTR_USBRAM =
|
||||
{
|
||||
.last_lba = __n2be(DISK_BLOCK_NUM-1), // read capacity
|
||||
.block_size = __n2be(DISK_BLOCK_SIZE)
|
||||
.last_lba = ENDIAN_BE(DISK_BLOCK_NUM-1), // read capacity
|
||||
.block_size = ENDIAN_BE(DISK_BLOCK_SIZE)
|
||||
};
|
||||
|
||||
ATTR_USB_MIN_ALIGNMENT
|
||||
|
|
@ -76,9 +76,9 @@ ATTR_USB_MIN_ALIGNMENT
|
|||
static scsi_read_format_capacity_data_t mscd_format_capacity_data TUSB_CFG_ATTR_USBRAM =
|
||||
{
|
||||
.list_length = 8,
|
||||
.block_num = __n2be(DISK_BLOCK_NUM), // write capacity
|
||||
.block_num = ENDIAN_BE(DISK_BLOCK_NUM), // write capacity
|
||||
.descriptor_type = 2, // TODO formatted media, refractor to const
|
||||
.block_size_u16 = __n2be_16(DISK_BLOCK_SIZE)
|
||||
.block_size_u16 = ENDIAN_BE16(DISK_BLOCK_SIZE)
|
||||
};
|
||||
|
||||
ATTR_USB_MIN_ALIGNMENT
|
||||
|
|
|
|||
|
|
@ -89,7 +89,7 @@
|
|||
#define TUSB_CFG_DEVICE_HID_MOUSE 0
|
||||
#define TUSB_CFG_DEVICE_HID_GENERIC 0
|
||||
#define TUSB_CFG_DEVICE_MSC 1
|
||||
#define TUSB_CFG_DEVICE_CDC 1
|
||||
#define TUSB_CFG_DEVICE_CDC 0
|
||||
|
||||
|
||||
|
||||
|
|
@ -103,7 +103,7 @@
|
|||
|
||||
#define TUSB_CFG_OS_TICKS_PER_SECOND 1000
|
||||
|
||||
#ifdef __CODE_RED // make use of code red's support for ram region macros
|
||||
#ifdef __CODE_RED // compiled with lpcxpresso
|
||||
#if (TUSB_CFG_MCU == MCU_LPC11UXX) || (TUSB_CFG_MCU == MCU_LPC13UXX)
|
||||
#define TUSB_RAM_SECTION ".data.$RAM2"
|
||||
#elif (TUSB_CFG_MCU == MCU_LPC43XX)
|
||||
|
|
@ -116,9 +116,17 @@
|
|||
|
||||
#define TUSB_CFG_ATTR_USBRAM __attribute__ ((section(TUSB_RAM_SECTION)))
|
||||
|
||||
#elif defined __CC_ARM // Compiled with Keil armcc
|
||||
#elif defined __CC_ARM // Compiled with Keil armcc, USBRAM_SECTION is defined in scatter files
|
||||
|
||||
#define TUSB_CFG_ATTR_USBRAM
|
||||
#if (TUSB_CFG_MCU == MCU_LPC11UXX) || (TUSB_CFG_MCU == MCU_LPC13UXX)
|
||||
#define TUSB_CFG_ATTR_USBRAM __attribute__ ((section("USBRAM_SECTION")))
|
||||
#elif (TUSB_CFG_MCU == MCU_LPC43XX)
|
||||
#define TUSB_CFG_ATTR_USBRAM
|
||||
#elif (TUSB_CFG_MCU == MCU_LPC175X_6X)
|
||||
#define TUSB_CFG_ATTR_USBRAM
|
||||
#else
|
||||
#error Please define USB RAM section
|
||||
#endif
|
||||
|
||||
#elif __ICCARM__ // compiled with IAR
|
||||
|
||||
|
|
|
|||
|
|
@ -179,7 +179,7 @@ typedef ATTR_PACKED_STRUCT(struct)
|
|||
//--------------------------------------------------------------------+
|
||||
// STRINGS DESCRIPTOR
|
||||
//--------------------------------------------------------------------+
|
||||
tusb_descriptor_string_t * const desc_str_table[TUSB_CFG_DEVICE_STRING_DESCRIPTOR_COUNT];
|
||||
extern tusb_descriptor_string_t * const desc_str_table[TUSB_CFG_DEVICE_STRING_DESCRIPTOR_COUNT];
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// Export descriptors
|
||||
|
|
|
|||
|
|
@ -1,5 +1,7 @@
|
|||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<?fileVersion 4.0.0?><cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
|
||||
<?fileVersion 4.0.0?>
|
||||
|
||||
<cproject storage_type_id="org.eclipse.cdt.core.XmlProjectDescriptionStorage">
|
||||
<storageModule moduleId="org.eclipse.cdt.core.settings">
|
||||
<cconfiguration id="com.crt.advproject.config.exe.debug.1239969983">
|
||||
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.crt.advproject.config.exe.debug.1239969983" moduleId="org.eclipse.cdt.core.settings" name="Board NGX4330">
|
||||
|
|
@ -98,6 +100,7 @@
|
|||
<storageModule moduleId="org.eclipse.cdt.core.language.mapping"/>
|
||||
<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
|
||||
<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
|
||||
<storageModule moduleId="scannerConfiguration"/>
|
||||
</cconfiguration>
|
||||
<cconfiguration id="com.crt.advproject.config.exe.debug.1239969983.636406670">
|
||||
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.crt.advproject.config.exe.debug.1239969983.636406670" moduleId="org.eclipse.cdt.core.settings" name="Board EA4357">
|
||||
|
|
@ -200,6 +203,196 @@
|
|||
<storageModule moduleId="org.eclipse.cdt.core.language.mapping"/>
|
||||
<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
|
||||
<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
|
||||
<storageModule moduleId="scannerConfiguration"/>
|
||||
</cconfiguration>
|
||||
<cconfiguration id="com.crt.advproject.config.exe.debug.1239969983.636406670.2076562408">
|
||||
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.crt.advproject.config.exe.debug.1239969983.636406670.872802562" moduleId="org.eclipse.cdt.core.settings" name="Board LPCXpresso1769">
|
||||
<macros>
|
||||
<stringMacro name="CFLAGS_OFF" type="VALUE_TEXT" value=""/>
|
||||
<stringMacro name="CFLAGS" type="VALUE_TEXT" value="${CFLAGS_OFF}"/>
|
||||
<stringMacro name="CFLAGS_ON" type="VALUE_TEXT" value="-pedantic -Wextra -Wswitch-default -Wunsafe-loop-optimizations -Wcast-align -Wlogical-op -Wpacked-bitfield-compat -Wpadded -Wnested-externs -Wredundant-decls -Winline -Wpacked"/>
|
||||
</macros>
|
||||
<externalSettings/>
|
||||
<extensions>
|
||||
<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GNU_ELF" point="org.eclipse.cdt.core.BinaryParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.MakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
</extensions>
|
||||
</storageModule>
|
||||
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
|
||||
<configuration artifactExtension="axf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="" errorParsers="org.eclipse.cdt.core.MakeErrorParser;org.eclipse.cdt.core.GCCErrorParser;org.eclipse.cdt.core.GLDErrorParser;org.eclipse.cdt.core.GASErrorParser;org.eclipse.cdt.core.CWDLocator;org.eclipse.cdt.core.GmakeErrorParser" id="com.crt.advproject.config.exe.debug.1239969983.636406670.872802562" name="Board LPCXpresso1769" parent="com.crt.advproject.config.exe.debug" postannouncebuildStep="Performing post-build steps" postbuildStep="arm-none-eabi-size "${BuildArtifactFileName}"; # arm-none-eabi-objcopy -O binary "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" ; checksum -p ${TargetChip} -d "${BuildArtifactFileBaseName}.bin"; " preannouncebuildStep="" prebuildStep="">
|
||||
<folderInfo id="com.crt.advproject.config.exe.debug.1239969983.636406670.872802562." name="/" resourcePath="">
|
||||
<toolChain errorParsers="" id="com.crt.advproject.toolchain.exe.debug.1290516165" name="Code Red MCU Tools" superClass="com.crt.advproject.toolchain.exe.debug">
|
||||
<targetPlatform binaryParser="org.eclipse.cdt.core.ELF;org.eclipse.cdt.core.GNU_ELF" id="com.crt.advproject.platform.exe.debug.90491847" name="ARM-based MCU (Debug)" superClass="com.crt.advproject.platform.exe.debug"/>
|
||||
<builder buildPath="${workspace_loc:/host/Debug}" errorParsers="org.eclipse.cdt.core.GmakeErrorParser;org.eclipse.cdt.core.CWDLocator" id="com.crt.advproject.builder.exe.debug.335566651" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="com.crt.advproject.builder.exe.debug"/>
|
||||
<tool id="com.crt.advproject.cpp.exe.debug.1207646747" name="MCU C++ Compiler" superClass="com.crt.advproject.cpp.exe.debug"/>
|
||||
<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${CFLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GCCErrorParser" id="com.crt.advproject.gcc.exe.debug.1892359128" name="MCU C Compiler" superClass="com.crt.advproject.gcc.exe.debug">
|
||||
<option id="com.crt.advproject.gcc.arch.1922208309" name="Architecture" superClass="com.crt.advproject.gcc.arch" value="com.crt.advproject.gcc.target.cm3" valueType="enumerated"/>
|
||||
<option id="com.crt.advproject.gcc.thumb.2045365493" name="Thumb mode" superClass="com.crt.advproject.gcc.thumb" value="true" valueType="boolean"/>
|
||||
<option id="gnu.c.compiler.option.preprocessor.def.symbols.1650588201" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" valueType="definedSymbols">
|
||||
<listOptionValue builtIn="false" value="__REDLIB__"/>
|
||||
<listOptionValue builtIn="false" value="__USE_CMSIS"/>
|
||||
<listOptionValue builtIn="false" value="TUSB_CFG_MCU=MCU_LPC175X_6X"/>
|
||||
<listOptionValue builtIn="false" value="BOARD=BOARD_LPCXPRESSO1769"/>
|
||||
<listOptionValue builtIn="false" value="TUSB_CFG_OS=TUSB_OS_NONE"/>
|
||||
<listOptionValue builtIn="false" value="DEBUG"/>
|
||||
<listOptionValue builtIn="false" value="__CODE_RED"/>
|
||||
</option>
|
||||
<option id="gnu.c.compiler.option.misc.other.1566376313" name="Other flags" superClass="gnu.c.compiler.option.misc.other" value="-c -fmessage-length=0 -fno-builtin -ffunction-sections -fdata-sections" valueType="string"/>
|
||||
<option id="gnu.c.compiler.option.include.paths.643947484" name="Include paths (-I)" superClass="gnu.c.compiler.option.include.paths" valueType="includePath">
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/bsp/lpc175x_6x/CMSISv2p00_LPC17xx/inc}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/bsp/lpc175x_6x/LPC17xx_DriverLib/include}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/fatfs}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/lwip/lwip/src/include/ipv4}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/lwip/lpclwip}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/lwip/lwip/src/include}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/bsp}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/tinyusb}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/src}""/>
|
||||
</option>
|
||||
<option id="com.crt.advproject.c.misc.dialect.455591496" name="C Dialect" superClass="com.crt.advproject.c.misc.dialect" value="com.crt.advproject.misc.dialect.gnu99" valueType="enumerated"/>
|
||||
<option id="com.crt.advproject.gcc.fpu.2023059993" name="Floating point" superClass="com.crt.advproject.gcc.fpu" value="com.crt.advproject.gcc.fpu.fpv4" valueType="enumerated"/>
|
||||
<inputType id="com.crt.advproject.compiler.input.2013630692" superClass="com.crt.advproject.compiler.input"/>
|
||||
</tool>
|
||||
<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GASErrorParser" id="com.crt.advproject.gas.exe.debug.888595290" name="MCU Assembler" superClass="com.crt.advproject.gas.exe.debug">
|
||||
<option id="com.crt.advproject.gas.arch.1325678596" name="Architecture" superClass="com.crt.advproject.gas.arch" value="com.crt.advproject.gas.target.cm3" valueType="enumerated"/>
|
||||
<option id="com.crt.advproject.gas.thumb.635946568" name="Thumb mode" superClass="com.crt.advproject.gas.thumb" value="true" valueType="boolean"/>
|
||||
<option id="gnu.both.asm.option.flags.crt.194674049" name="Assembler flags" superClass="gnu.both.asm.option.flags.crt" value="-c -x assembler-with-cpp -D__REDLIB__ -DDEBUG -D__CODE_RED" valueType="string"/>
|
||||
<option id="com.crt.advproject.gas.fpu.280334081" name="Floating point" superClass="com.crt.advproject.gas.fpu" value="com.crt.advproject.gas.fpu.fpv4" valueType="enumerated"/>
|
||||
<inputType id="com.crt.advproject.assembler.input.556629189" name="Additional Assembly Source Files" superClass="com.crt.advproject.assembler.input"/>
|
||||
<inputType id="cdt.managedbuild.tool.gnu.assembler.input.1329754856" superClass="cdt.managedbuild.tool.gnu.assembler.input"/>
|
||||
</tool>
|
||||
<tool id="com.crt.advproject.link.cpp.exe.debug.2052352042" name="MCU C++ Linker" superClass="com.crt.advproject.link.cpp.exe.debug"/>
|
||||
<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GLDErrorParser" id="com.crt.advproject.link.exe.debug.89021864" name="MCU Linker" superClass="com.crt.advproject.link.exe.debug">
|
||||
<option id="com.crt.advproject.link.arch.1924063030" name="Architecture" superClass="com.crt.advproject.link.arch" value="com.crt.advproject.link.target.cm3" valueType="enumerated"/>
|
||||
<option id="com.crt.advproject.link.thumb.62526492" name="Thumb mode" superClass="com.crt.advproject.link.thumb" value="true" valueType="boolean"/>
|
||||
<option id="com.crt.advproject.link.script.448095773" name="Linker script" superClass="com.crt.advproject.link.script" value=""host_os_none_Board_LPCXpresso1769.ld"" valueType="string"/>
|
||||
<option id="com.crt.advproject.link.manage.431533256" name="Manage linker script" superClass="com.crt.advproject.link.manage" value="true" valueType="boolean"/>
|
||||
<option id="gnu.c.link.option.nostdlibs.359741190" name="No startup or default libs (-nostdlib)" superClass="gnu.c.link.option.nostdlibs" value="true" valueType="boolean"/>
|
||||
<option id="gnu.c.link.option.other.2049042749" name="Other options (-Xlinker [option])" superClass="gnu.c.link.option.other" valueType="stringList">
|
||||
<listOptionValue builtIn="false" value="-Map="${BuildArtifactFileBaseName}.map""/>
|
||||
<listOptionValue builtIn="false" value="--gc-sections"/>
|
||||
</option>
|
||||
<option id="gnu.c.link.option.libs.1868402007" name="Libraries (-l)" superClass="gnu.c.link.option.libs"/>
|
||||
<option id="gnu.c.link.option.paths.943091458" name="Library search path (-L)" superClass="gnu.c.link.option.paths"/>
|
||||
<option id="com.crt.advproject.link.gcc.hdrlib.961930336" name="Use C library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.semihost" valueType="enumerated"/>
|
||||
<option id="com.crt.advproject.link.fpu.837495348" name="Floating point" superClass="com.crt.advproject.link.fpu" value="com.crt.advproject.link.fpu.fpv4" valueType="enumerated"/>
|
||||
<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.1609667925" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
|
||||
<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
|
||||
<additionalInput kind="additionalinput" paths="$(LIBS)"/>
|
||||
</inputType>
|
||||
</tool>
|
||||
</toolChain>
|
||||
</folderInfo>
|
||||
<sourceEntries>
|
||||
<entry excluding="bsp/lpc43xx|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_sdmmc.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_sdif.c|lwip|lwip/lpclwip/arch/lpc17xx_40xx_systick_arch.c|lwip/lpclwip/arch/lpc17xx_40xx_emac.c|lwip/contrib|lwip/lwip/src/core/snmp|lwip/lwip/src/netif/slipif.c|lwip/lwip/src/netif/ethernetif.c|lwip/lwip/src/netif/ppp|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/sdio.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_ssp.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_pwr.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_wwdt.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_i2s.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_sct.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_rit.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_rgu.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_qei.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_rtc.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_mcpwm.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_lcd.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_gpdma.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/debug_frmwrk.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_evrt.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_emc.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_dac.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_can.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_atimer.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_adc.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/LCDTerm.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/Font5x7.c|bsp/boards/embedded_artists/oem_base_board/acc.c|bsp/boards/embedded_artists/oem_base_board/base_eeprom.c|ngx|bsp/boards/embedded_artists/oem_base_board/joystick.c|bsp/lpc11uxx|bsp/boards/embedded_artists/oem_base_board/lm75a.c|bsp/boards/embedded_artists/oem_base_board/uda1380.c|bsp/lpc13uxx|bsp/boards/embedded_artists/oem_base_board/memreg.c|bsp/boards/embedded_artists/oem_base_board/norflash.c" flags="VALUE_WORKSPACE_PATH" kind="sourcePath" name=""/>
|
||||
</sourceEntries>
|
||||
</configuration>
|
||||
</storageModule>
|
||||
<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
|
||||
<storageModule moduleId="org.eclipse.cdt.core.language.mapping"/>
|
||||
<storageModule moduleId="org.eclipse.cdt.internal.ui.text.commentOwnerProjectMappings"/>
|
||||
<storageModule moduleId="org.eclipse.cdt.make.core.buildtargets"/>
|
||||
<storageModule moduleId="scannerConfiguration"/>
|
||||
</cconfiguration>
|
||||
<cconfiguration id="com.crt.advproject.config.exe.debug.1239969983.636406670.872802562">
|
||||
<storageModule moduleId="scannerConfiguration"/>
|
||||
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
|
||||
<configuration artifactExtension="axf" artifactName="${ProjName}" buildArtefactType="org.eclipse.cdt.build.core.buildArtefactType.exe" buildProperties="org.eclipse.cdt.build.core.buildArtefactType=org.eclipse.cdt.build.core.buildArtefactType.exe" cleanCommand="rm -rf" description="" errorParsers="org.eclipse.cdt.core.MakeErrorParser;org.eclipse.cdt.core.GCCErrorParser;org.eclipse.cdt.core.GLDErrorParser;org.eclipse.cdt.core.GASErrorParser;org.eclipse.cdt.core.CWDLocator;org.eclipse.cdt.core.GmakeErrorParser" id="com.crt.advproject.config.exe.debug.1239969983.636406670.872802562" name="Board LPCXpresso1769" parent="com.crt.advproject.config.exe.debug" postannouncebuildStep="Performing post-build steps" postbuildStep="arm-none-eabi-size "${BuildArtifactFileName}"; # arm-none-eabi-objcopy -O binary "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" ; checksum -p ${TargetChip} -d "${BuildArtifactFileBaseName}.bin"; " preannouncebuildStep="" prebuildStep="">
|
||||
<folderInfo id="com.crt.advproject.config.exe.debug.1239969983.636406670.872802562." name="/" resourcePath="">
|
||||
<toolChain errorParsers="" id="com.crt.advproject.toolchain.exe.debug.1290516165" name="Code Red MCU Tools" superClass="com.crt.advproject.toolchain.exe.debug">
|
||||
<targetPlatform binaryParser="org.eclipse.cdt.core.ELF;org.eclipse.cdt.core.GNU_ELF" id="com.crt.advproject.platform.exe.debug.90491847" name="ARM-based MCU (Debug)" superClass="com.crt.advproject.platform.exe.debug"/>
|
||||
<builder buildPath="${workspace_loc:/host/Debug}" errorParsers="org.eclipse.cdt.core.GmakeErrorParser;org.eclipse.cdt.core.CWDLocator" id="com.crt.advproject.builder.exe.debug.335566651" keepEnvironmentInBuildfile="false" managedBuildOn="true" name="Gnu Make Builder" superClass="com.crt.advproject.builder.exe.debug"/>
|
||||
<tool id="com.crt.advproject.cpp.exe.debug.1207646747" name="MCU C++ Compiler" superClass="com.crt.advproject.cpp.exe.debug"/>
|
||||
<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${CFLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GCCErrorParser" id="com.crt.advproject.gcc.exe.debug.1892359128" name="MCU C Compiler" superClass="com.crt.advproject.gcc.exe.debug">
|
||||
<option id="com.crt.advproject.gcc.arch.1922208309" name="Architecture" superClass="com.crt.advproject.gcc.arch" value="com.crt.advproject.gcc.target.cm3" valueType="enumerated"/>
|
||||
<option id="com.crt.advproject.gcc.thumb.2045365493" name="Thumb mode" superClass="com.crt.advproject.gcc.thumb" value="true" valueType="boolean"/>
|
||||
<option id="gnu.c.compiler.option.preprocessor.def.symbols.1650588201" name="Defined symbols (-D)" superClass="gnu.c.compiler.option.preprocessor.def.symbols" valueType="definedSymbols">
|
||||
<listOptionValue builtIn="false" value="__REDLIB__"/>
|
||||
<listOptionValue builtIn="false" value="__USE_CMSIS"/>
|
||||
<listOptionValue builtIn="false" value="TUSB_CFG_MCU=MCU_LPC175X_6X"/>
|
||||
<listOptionValue builtIn="false" value="BOARD=BOARD_LPCXPRESSO1769"/>
|
||||
<listOptionValue builtIn="false" value="TUSB_CFG_OS=TUSB_OS_FREERTOS"/>
|
||||
<listOptionValue builtIn="false" value="TUSB_CFG_OS_TASK_PRIO=(configMAX_PRIORITIES-5)"/>
|
||||
<listOptionValue builtIn="false" value="DEBUG"/>
|
||||
<listOptionValue builtIn="false" value="__CODE_RED"/>
|
||||
</option>
|
||||
<option id="gnu.c.compiler.option.misc.other.1566376313" name="Other flags" superClass="gnu.c.compiler.option.misc.other" value="-c -fmessage-length=0 -fno-builtin -ffunction-sections -fdata-sections" valueType="string"/>
|
||||
<option id="gnu.c.compiler.option.include.paths.643947484" name="Include paths (-I)" superClass="gnu.c.compiler.option.include.paths" valueType="includePath">
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/bsp/lpc175x_6x/CMSISv2p00_LPC17xx/inc}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/bsp/lpc175x_6x/LPC17xx_DriverLib/include}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/freertos/freertos/Source/include}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/freertos}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/fatfs}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/bsp}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/tinyusb}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/src}""/>
|
||||
</option>
|
||||
<option id="com.crt.advproject.c.misc.dialect.455591496" name="C Dialect" superClass="com.crt.advproject.c.misc.dialect" value="com.crt.advproject.misc.dialect.gnu99" valueType="enumerated"/>
|
||||
<option id="com.crt.advproject.gcc.fpu.2023059993" name="Floating point" superClass="com.crt.advproject.gcc.fpu" value="com.crt.advproject.gcc.fpu.fpv4" valueType="enumerated"/>
|
||||
<inputType id="com.crt.advproject.compiler.input.2013630692" superClass="com.crt.advproject.compiler.input"/>
|
||||
</tool>
|
||||
<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GASErrorParser" id="com.crt.advproject.gas.exe.debug.888595290" name="MCU Assembler" superClass="com.crt.advproject.gas.exe.debug">
|
||||
<option id="com.crt.advproject.gas.arch.1325678596" name="Architecture" superClass="com.crt.advproject.gas.arch" value="com.crt.advproject.gas.target.cm3" valueType="enumerated"/>
|
||||
<option id="com.crt.advproject.gas.thumb.635946568" name="Thumb mode" superClass="com.crt.advproject.gas.thumb" value="true" valueType="boolean"/>
|
||||
<option id="gnu.both.asm.option.flags.crt.194674049" name="Assembler flags" superClass="gnu.both.asm.option.flags.crt" value="-c -x assembler-with-cpp -D__REDLIB__ -DDEBUG -D__CODE_RED" valueType="string"/>
|
||||
<option id="com.crt.advproject.gas.fpu.280334081" name="Floating point" superClass="com.crt.advproject.gas.fpu" value="com.crt.advproject.gas.fpu.fpv4" valueType="enumerated"/>
|
||||
<inputType id="com.crt.advproject.assembler.input.556629189" name="Additional Assembly Source Files" superClass="com.crt.advproject.assembler.input"/>
|
||||
<inputType id="cdt.managedbuild.tool.gnu.assembler.input.1329754856" superClass="cdt.managedbuild.tool.gnu.assembler.input"/>
|
||||
</tool>
|
||||
<tool id="com.crt.advproject.link.cpp.exe.debug.2052352042" name="MCU C++ Linker" superClass="com.crt.advproject.link.cpp.exe.debug"/>
|
||||
<tool command="arm-none-eabi-gcc" commandLinePattern="${COMMAND} ${FLAGS} ${OUTPUT_FLAG}${OUTPUT_PREFIX}${OUTPUT} ${INPUTS}" errorParsers="org.eclipse.cdt.core.GLDErrorParser" id="com.crt.advproject.link.exe.debug.89021864" name="MCU Linker" superClass="com.crt.advproject.link.exe.debug">
|
||||
<option id="com.crt.advproject.link.arch.1924063030" name="Architecture" superClass="com.crt.advproject.link.arch" value="com.crt.advproject.link.target.cm3" valueType="enumerated"/>
|
||||
<option id="com.crt.advproject.link.thumb.62526492" name="Thumb mode" superClass="com.crt.advproject.link.thumb" value="true" valueType="boolean"/>
|
||||
<option id="com.crt.advproject.link.script.448095773" name="Linker script" superClass="com.crt.advproject.link.script" value=""host_freertos_Board_LPCXpresso1769.ld"" valueType="string"/>
|
||||
<option id="com.crt.advproject.link.manage.431533256" name="Manage linker script" superClass="com.crt.advproject.link.manage" value="true" valueType="boolean"/>
|
||||
<option id="gnu.c.link.option.nostdlibs.359741190" name="No startup or default libs (-nostdlib)" superClass="gnu.c.link.option.nostdlibs" value="true" valueType="boolean"/>
|
||||
<option id="gnu.c.link.option.other.2049042749" name="Other options (-Xlinker [option])" superClass="gnu.c.link.option.other" valueType="stringList">
|
||||
<listOptionValue builtIn="false" value="-Map="${BuildArtifactFileBaseName}.map""/>
|
||||
<listOptionValue builtIn="false" value="--gc-sections"/>
|
||||
</option>
|
||||
<option id="gnu.c.link.option.libs.1868402007" name="Libraries (-l)" superClass="gnu.c.link.option.libs"/>
|
||||
<option id="gnu.c.link.option.paths.943091458" name="Library search path (-L)" superClass="gnu.c.link.option.paths"/>
|
||||
<option id="com.crt.advproject.link.gcc.hdrlib.961930336" name="Use C library" superClass="com.crt.advproject.link.gcc.hdrlib" value="com.crt.advproject.gcc.link.hdrlib.codered.semihost" valueType="enumerated"/>
|
||||
<option id="com.crt.advproject.link.fpu.837495348" name="Floating point" superClass="com.crt.advproject.link.fpu" value="com.crt.advproject.link.fpu.fpv4" valueType="enumerated"/>
|
||||
<inputType id="cdt.managedbuild.tool.gnu.c.linker.input.1609667925" superClass="cdt.managedbuild.tool.gnu.c.linker.input">
|
||||
<additionalInput kind="additionalinputdependency" paths="$(USER_OBJS)"/>
|
||||
<additionalInput kind="additionalinput" paths="$(LIBS)"/>
|
||||
</inputType>
|
||||
</tool>
|
||||
</toolChain>
|
||||
</folderInfo>
|
||||
<sourceEntries>
|
||||
<entry excluding="bsp/lpc43xx|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_sdmmc.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_sdif.c|lwip|lwip/lpclwip/arch/lpc17xx_40xx_systick_arch.c|lwip/lpclwip/arch/lpc17xx_40xx_emac.c|lwip/contrib|lwip/lwip/src/core/snmp|lwip/lwip/src/netif/slipif.c|lwip/lwip/src/netif/ethernetif.c|lwip/lwip/src/netif/ppp|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/sdio.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_ssp.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_pwr.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_wwdt.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_i2s.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_sct.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_rit.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_rgu.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_qei.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_rtc.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_mcpwm.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_lcd.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_gpdma.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/debug_frmwrk.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_evrt.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_emc.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_dac.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_can.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_atimer.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/lpc43xx_adc.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/LCDTerm.c|bsp/lpc43xx/CMSIS_LPC43xx_DriverLib/src/Font5x7.c|bsp/boards/embedded_artists/oem_base_board/acc.c|bsp/boards/embedded_artists/oem_base_board/base_eeprom.c|ngx|bsp/boards/embedded_artists/oem_base_board/joystick.c|bsp/lpc11uxx|bsp/boards/embedded_artists/oem_base_board/lm75a.c|bsp/boards/embedded_artists/oem_base_board/uda1380.c|bsp/lpc13uxx|bsp/boards/embedded_artists/oem_base_board/memreg.c|bsp/boards/embedded_artists/oem_base_board/norflash.c" flags="VALUE_WORKSPACE_PATH" kind="sourcePath" name=""/>
|
||||
</sourceEntries>
|
||||
</configuration>
|
||||
</storageModule>
|
||||
<storageModule buildSystemId="org.eclipse.cdt.managedbuilder.core.configurationDataProvider" id="com.crt.advproject.config.exe.debug.1239969983.636406670.872802562" moduleId="org.eclipse.cdt.core.settings" name="Board LPCXpresso1769">
|
||||
<macros>
|
||||
<stringMacro name="CFLAGS_OFF" type="VALUE_TEXT" value=""/>
|
||||
<stringMacro name="CFLAGS" type="VALUE_TEXT" value="${CFLAGS_OFF}"/>
|
||||
<stringMacro name="CFLAGS_ON" type="VALUE_TEXT" value="-pedantic -Wextra -Wswitch-default -Wunsafe-loop-optimizations -Wcast-align -Wlogical-op -Wpacked-bitfield-compat -Wpadded -Wnested-externs -Wredundant-decls -Winline -Wpacked"/>
|
||||
</macros>
|
||||
<externalSettings/>
|
||||
<extensions>
|
||||
<extension id="org.eclipse.cdt.core.ELF" point="org.eclipse.cdt.core.BinaryParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GNU_ELF" point="org.eclipse.cdt.core.BinaryParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GmakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.CWDLocator" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.MakeErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GCCErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GASErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
<extension id="org.eclipse.cdt.core.GLDErrorParser" point="org.eclipse.cdt.core.ErrorParser"/>
|
||||
</extensions>
|
||||
</storageModule>
|
||||
<storageModule moduleId="org.eclipse.cdt.core.externalSettings"/>
|
||||
</cconfiguration>
|
||||
</storageModule>
|
||||
<storageModule moduleId="cdtBuildSystem" version="4.0.0">
|
||||
|
|
|
|||
|
|
@ -504,9 +504,6 @@
|
|||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/bsp/lpc175x_6x/CMSISv2p00_LPC17xx/inc}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/bsp/lpc175x_6x/LPC17xx_DriverLib/include}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/fatfs}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/lwip/lwip/src/include/ipv4}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/lwip/lpclwip}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/lwip/lwip/src/include}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/bsp}""/>
|
||||
<listOptionValue builtIn="false" value=""${workspace_loc:/${ProjName}/tinyusb}""/>
|
||||
|
|
|
|||
|
|
@ -85,7 +85,6 @@
|
|||
|
||||
#include "osal/osal.h"
|
||||
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
// MACROS
|
||||
//--------------------------------------------------------------------+
|
||||
|
|
@ -110,7 +109,14 @@
|
|||
#define U32_TO_U8S_BE(u32) U32_B1_U8(u32), U32_B2_U8(u32), U32_B3_U8(u32), U32_B4_U8(u32)
|
||||
#define U32_TO_U8S_LE(u32) U32_B4_U8(u32), U32_B3_U8(u32), U32_B2_U8(u32), U32_B1_U8(u32)
|
||||
|
||||
#define __n2be_16(u16) ((uint16_t) ((U16_LOW_U8(u16) << 8) | U16_HIGH_U8(u16)) ) // TODO refractor later
|
||||
//------------- Endian Conversion -------------//
|
||||
#define ENDIAN_BE(le32) \
|
||||
(uint32_t) ( ((le32 & 0xFF) << 24) | ((le32 & 0xFF00) << 8) | ((le32 >> 8) & 0xFF00) | ((le32 >> 24) & 0xFF) )
|
||||
|
||||
#define ENDIAN_BE16(le16) ((uint16_t) ((U16_LOW_U8(le16) << 8) | U16_HIGH_U8(le16)) )
|
||||
|
||||
// TODO refractor to built-in function
|
||||
#define __n2be_16(u16) ((uint16_t) ((U16_LOW_U8(u16) << 8) | U16_HIGH_U8(u16)) )
|
||||
#define __be2n_16(u16) __n2be_16(u16)
|
||||
|
||||
//--------------------------------------------------------------------+
|
||||
|
|
|
|||
|
|
@ -130,66 +130,13 @@
|
|||
* @{
|
||||
*/
|
||||
|
||||
//#if __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__
|
||||
// built-in function to convert 32-bit from native to Big Endian
|
||||
#define __be2n __builtin_bswap32
|
||||
#define __n2be __be2n
|
||||
|
||||
//#define __le2be_16 __builtin_bswap16
|
||||
|
||||
|
||||
/** You can use the built-in function \b __builtin_constant_p to determine if a value is known to be constant at compile time and hence that GCC can perform constant-folding on expressions involving that value. The argument of the function is the value to test. The function returns the integer 1 if the argument is known to be a compile-time constant and 0 if it is not known to be a compile-time constant. A return of 0 does not indicate that the value is not a constant, but merely that GCC cannot prove it is a constant with the specified value of the -O option.
|
||||
You typically use this function in an embedded application where memory is a critical resource. If you have some complex calculation, you may want it to be folded if it involves constants, but need to call a function if it does not. For example:
|
||||
\code
|
||||
#define Scale_Value(X) \
|
||||
(__builtin_constant_p (X) ? ((X) * SCALE + OFFSET) : Scale (X))
|
||||
\endcode
|
||||
You may use this built-in function in either a macro or an inline function. However, if you use it in an inlined function and pass an argument of the function as the argument to the built-in, GCC never returns 1 when you call the inline function with a string constant or compound literal (see Compound Literals) and does not return 1 when you pass a constant numeric value to the inline function unless you specify the -O option.
|
||||
You may also use __builtin_constant_p in initializers for static data. For instance, you can write
|
||||
static const int table[] = { __builtin_constant_p (EXPRESSION) ? (EXPRESSION) : -1, };
|
||||
This is an acceptable initializer even if EXPRESSION is not a constant expression, including the case where __builtin_constant_p returns 1 because EXPRESSION can be folded to a constant but EXPRESSION contains operands that are not otherwise permitted in a static initializer (for example, 0 && foo ()). GCC must be more conservative about evaluating the built-in in this case, because it has no opportunity to perform optimization.
|
||||
*/
|
||||
#define BUILTIN_CONSTANT(exp) __builtin_constant_p(exp)
|
||||
|
||||
/** You can use the built-in function \b __builtin_types_compatible_p to determine whether two types are the same. This built-in function returns 1 if the unqualified versions of the types type1 and type2 (which are types, not expressions) are compatible, 0 otherwise. The result of this built-in function can be used in integer constant expressions.
|
||||
This built-in function ignores top level qualifiers (e.g., const, volatile). For example, int is equivalent to const int. The type int[] and int[5] are compatible. On the other hand, int and char * are not compatible, even if the size of their types, on the particular architecture are the same. Also, the amount of pointer indirection is taken into account when determining similarity. Consequently, short * is not similar to short **. Furthermore, two types that are typedefed are considered compatible if their underlying types are compatible.
|
||||
An enum type is not considered to be compatible with another enum type even if both are compatible with the same integer type; this is what the C standard specifies. For example, enum {foo, bar} is not similar to enum {hot, dog}.
|
||||
You typically use this function in code whose execution varies depending on the arguments' types. For example:
|
||||
\code
|
||||
#define foo(x) \
|
||||
({ \
|
||||
typeof (x) tmp = (x); \
|
||||
if (__builtin_types_compatible_p (typeof (x), long double)) \
|
||||
tmp = foo_long_double (tmp); \
|
||||
else if (__builtin_types_compatible_p (typeof (x), double)) \
|
||||
tmp = foo_double (tmp); \
|
||||
else if (__builtin_types_compatible_p (typeof (x), float)) \
|
||||
tmp = foo_float (tmp); \
|
||||
else \
|
||||
abort (); \
|
||||
tmp; \
|
||||
})
|
||||
\endcode
|
||||
*/
|
||||
#define BUILTIN_TYPE_COMPATIBLE(type1, type2) __builtin_types_compatible_p(type1, type2)
|
||||
|
||||
/** You can use the built-in function \b __builtin_choose_expr to evaluate code depending on the value of a constant expression. This built-in function returns exp1 if const_exp, which is an integer constant expression, is nonzero. Otherwise it returns exp2.
|
||||
This built-in function is analogous to the `? :' operator in C, except that the expression returned has its type unaltered by promotion rules. Also, the built-in function does not evaluate the expression that is not chosen. For example, if const_exp evaluates to true, exp2 is not evaluated even if it has side-effects.
|
||||
This built-in function can return an lvalue if the chosen argument is an lvalue. If exp1 is returned, the return type is the same as exp1's type. Similarly, if exp2 is returned, its return type is the same as exp2.
|
||||
Example:
|
||||
\code
|
||||
#define foo(x) \
|
||||
__builtin_choose_expr ( \
|
||||
__builtin_types_compatible_p (typeof (x), double), \
|
||||
foo_double (x), \
|
||||
__builtin_choose_expr ( \
|
||||
__builtin_types_compatible_p (typeof (x), float), \
|
||||
foo_float (x), \
|
||||
\\The void expression results in a compile-time error when assigning the result to something. \
|
||||
(void)0))\
|
||||
\endcode
|
||||
*/
|
||||
#define BUILTIN_CHOOSE_EXPR(const_exp, exp1, exp2) __builtin_choose_expr (const_exp, exp1, exp2)
|
||||
|
||||
/** @} */
|
||||
|
||||
#ifdef __cplusplus
|
||||
|
|
|
|||
|
|
@ -82,6 +82,7 @@
|
|||
#define ATTR_UNUSED
|
||||
|
||||
// built-in function to convert 32-bit Big-Endian to Little-Endian
|
||||
//#if __LITTLE_ENDIAN__
|
||||
#define __be2n __REV
|
||||
#define __n2be __be2n
|
||||
|
||||
|
|
|
|||
Loading…
Reference in New Issue