lib: update repo

brd: update part values for ibom
sch: set schottky name
2023-06-27 20:22:32 +02:00 · 2023-06-27 20:17:57 +02:00 · 2023-06-27 20:17:23 +02:00 · 2023-06-23 17:12:56 +02:00 · 2023-06-23 17:05:12 +02:00 · 2023-06-23 17:01:24 +02:00
65 changed files with 29649 additions and 3915 deletions
--- a/.gitignore
+++ b/.gitignore
@ -14,7 +14,6 @@ fp-info-cache
 # temporary files
 *~
 \#*\#
-~*.lck

 # outputs
 *.svg
@ -24,7 +23,6 @@ fp-info-cache
 *.zip
 *.bom.csv
 *.cpl.csv
-*.3d.step
 *.versioned.*
 fabrication

--- a/.qeda.yaml
+++ b/.qeda.yaml
@ -1,8 +1,6 @@
 config:
  nodate: true
  output: kicad7
-  symbol:
-    pinIcon: false
  pattern:
    densityLevel: 'N'
    lineWidth:
@ -10,7 +8,28 @@ config:
    polarityMark: none
    preferManufacturer: false
    smoothPadCorners: false
+  symbol:
+    pinIcon: false
 library:
  - resistor/r0603
  - capacitor/c0603
  - diode/led0805
+  - connector/tab_molex_197054001
+  - connector/barrel_dc-005-2.0
+  - connector/header-2.54@1x3
+  - connector/header-2.54@2x3
+  - connector/test-point
+  - connector/xt60@f
+  - mcu/espressif_esp32-c3-wroom-02@02
+  - vreg/buck_tx4137
+  - connector/xt60pw@f
+  - ic/can_tja1051@t/3
+  - capacitor/cap_radial_5mm
+  - connector/usb-c_hro_type-c-31-m-12
+  - capacitor/c2220
+  - inductor/l4540
+  - mechanical/switch_xkb_sk-3296s@l1
+  - vreg/ldo_torex_xc6206
+  - diode/schottky@sod323
+  - transistor/optocoupler_pc817@smd
+  - mechanical/smd-button_hyp_1ts002e
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@ -0,0 +1,21 @@
+v1
+==
+
+improvements:
+
+- add XT60 connector for battery (horizontal and vertical)
+- add MCU to send activation CAN messaged
+- add buck + LDO converter to power MCU
+
+v0
+==
+
+this is mainly a board used as connector to the battery.
+it provides:
+
+- holes for wires to access the battery
+- a DC barrel for charging (5.0 OD, 2.0 ID)
+- a 3-pin header for the CAN port
+- a 3-pin switch to turn power on/off (floating the Vsense wire)
+- an LED to show when a charger is connected
+- an LED to show when the battery is on
--- a/DEVELOPMENT.md
+++ b/DEVELOPMENT.md
@ -6,7 +6,7 @@ requirements
 to be able to generate the outputs, you need following software:

 - [QEDA](http://qeda.org/): to generate footprints for the parts
- [KiCad v8](https://www.kicad.org/): EDA software used for schematic capture and board layout
+- [KiCad v7](https://www.kicad.org/): EDA software used for schematic capture and board layout
 - [PcbDraw](https://github.com/yaqwsx/PcbDraw): to generate board layout rendering
 - [KiKit](https://github.com/yaqwsx/KiKit): to generate fabrications files (Gerber, Excellon)
 - [KiBoM](https://github.com/SchrodingersGat/KiBoM): to generate Bill of Material (CSV)
--- a/JLCPCB_CORRECTION.csv
+++ b/JLCPCB_CORRECTION.csv
@ -0,0 +1,14 @@
+package;x;y;rot
+LEDC2012X80N;0;0;-90
+LEDC1608X90N;0;0;-90
+UC1608X55N;0;0;-90
+CAPC1608X92N;0;0;-90
+SOT95P237X112-3N;0;0;180
+CONNECTOR_MY-1220-03;0;-1.1;0
+CONNECTOR_XKB_U262-24XN-4BV64;0;-1.3;0
+CONNECTOR_U231-09XN-4BLRA00;0;-3.0;0
+SOP254P976X355-14N;0;0;-90
+SOP65P640X120-20N;0;0;-90
+CONNECTOR_HDMI-001S;0;1.1;0
+CONNECTOR_XKB_U261-24XN-4BC2LS;0;-5.1;0
+CONNECTOR_XKB_U262-24XN-4BV60:0;-0.65;0
--- a/50
+++ b/50
@ -1,14 +1,14 @@
 # project file name (use for schematic and board layout)
-NAME ?= template
+NAME ?= RPH0002_connector
 SUBSHEET ?= 
 # path to KiCad CLI
 KICAD = kicad-cli
 # path to qeda
 QEDA := qeda
 # path to KiBOM
-KIBOM := kibom
+KIBOM := ./KiBOM_CLI.py
 # path to InteractiveHtmlBom
-IBOMGEN := ~/.local/share/kicad/8.0/3rdparty/plugins/org_openscopeproject_InteractiveHtmlBom/generate_interactive_bom.py
+IBOMGEN := ~/.local/share/kicad/7.0/3rdparty/plugins/org_openscopeproject_InteractiveHtmlBom/generate_interactive_bom.py

 # read project version
 VERSION := $(shell cat version)
@ -33,15 +33,13 @@ VERSIONED_SHEET = $(foreach SHEET,$(NAME) $(SUBSHEET),$(SHEET).versioned.kicad_s
 FABRICATION_DIR := fabrication
 IBOM := ${FABRICATION_DIR}/ibom.html

-all: $(VERSIONED_SHEET) ${NAME}.sch.pdf ${NAME}.bom.csv render fab
+all: $(VERSIONED_SHEET) ${NAME}.sch.pdf ${NAME}.brd-top.png ${NAME}.brd-bot.png ${NAME}.bom.csv fab

 fab: ${FABRICATION_DIR} ${IBOM}

-render: ${NAME}.brd-top.png ${NAME}.brd-bot.png ${NAME}.brd-top.svg ${NAME}.brd-bot.svg ${NAME}.3d.step
-
 # generate fabrication files (gerbers/drill/BoM/PnP)
 ${FABRICATION_DIR}: ${NAME}.versioned.kicad_sch ${NAME}.versioned.kicad_pcb
-	kikit fab jlcpcb --no-drc --assembly --field JLCPCB,LCSC --schematic $^ $@
+	kikit fab jlcpcb --assembly --schematic $^ $@

 # generate fabrication files (gerbers/drill/uncorrected PnP)
 #${FABRICATION_DIR}: ${NAME}.versioned.kicad_pcb
@ -64,49 +62,35 @@ lib:

 # generate render from layout (top side)
 %.brd-top.png: %.versioned.kicad_pcb
-	pcbdraw plot --silent --no-components --dpi 600 --side front $< $@
+	pcbdraw plot --silent $< --dpi 600 --side front $@

 # generate render from layout (bottom side)
 %.brd-bot.png: %.versioned.kicad_pcb
-	pcbdraw plot --silent --no-components --dpi 600 --side back $< $@
-
-# generate render from layout (top side)
-%.brd-top.svg: %.versioned.kicad_pcb
-	$(KICAD) pcb export svg --layers F.Cu,F.Paste,F.Silkscreen,Edge.Cuts --page-size-mode 2 --exclude-drawing-sheet --output $@ $<
-
-# generate render from layout (bottom side)
-%.brd-bot.svg: %.versioned.kicad_pcb
-	$(KICAD) pcb export svg --layers B.Cu,B.Paste,B.Silkscreen,Edge.Cuts --mirror --page-size-mode 2 --exclude-drawing-sheet --output $@ $<
+	pcbdraw plot --silent $< --dpi 600 --side back $@

 # export Bill of Material (as CSV)
 %.bom.xml: %.versioned.kicad_sch %.versioned.kicad_pro
 	$(KICAD) sch export python-bom --output $@ $<

-# export 3D model
-%.3d.step: %.versioned.kicad_pcb
-	$(KICAD) pcb export step --output $@ $<
-
 # export Bill of Material (as CSV)
 %.bom.csv: %.bom.xml
-	$(KIBOM) $< $@
+	python $(KIBOM) $< $@

 # generate panel
-PANEL_DIR := panel_fab
-
-panel: panel.kicad_pcb panel.brd-top.svg panel.brd-bot.svg panel.brd-top.png panel.brd-bot.png ${PANEL_DIR}
-
-panel.kicad_pcb: ${NAME}.versioned.kicad_pcb ${NAME}.versioned.kicad_pro ${NAME}.versioned.kicad_sch panel.versioned.json
-	kikit panelize -p panel.versioned.json ${NAME}.versioned.kicad_pcb $@
+PANEL_DIR := panel
+panel: panel.kicad_pcb
+panel.kicad_pcb: ${NAME}.versioned.kicad_pcb ${NAME}.versioned.kicad_pro ${NAME}.versioned.kicad_sch ${NAME}.versioned.json
+	kikit panelize -p ${NAME}.versioned.json ${NAME}.versioned.kicad_pcb $@
 	sed --in-place 's/\"missing_courtyard\": \"warning\"/\"missing_courtyard\": \"ignore\"/g' $(patsubst %.kicad_pcb,%.kicad_pro,$@) # the mouse bites don't have a courtyard
-
-${PANEL_DIR}: ${NAME}.versioned.kicad_sch panel.kicad_pcb
-	kikit fab jlcpcb --assembly --missingError --field JLCPCB,LCSC --schematic $^ $@
+	kikit fab jlcpcb --assembly --missingError --schematic ${NAME}.versioned.kicad_sch $@ ${PANEL_DIR}
+	pcbdraw --silent $@ --dpi 600 panel.brd-top.png
+	pcbdraw --silent $@ --dpi 600 --back panel.brd-bot.png

 clean:
 	rm -f $(foreach EXT,$(VERSIONED_EXT),${NAME}.versioned.$(EXT))
-	rm -f ${NAME}.sch.pdf ${NAME}.brd-top.png ${NAME}.brd-bot.png ${NAME}.brd-top.svg ${NAME}.brd-bot.svg ${NAME}.versioned.xml ${NAME}.bom.csv
+	rm -f ${NAME}.sch.pdf ${NAME}.brd-top.png ${NAME}.brd-bot.png ${NAME}.versioned.xml ${NAME}.bom.csv
 	rm -f ${NAME}.versioned.kicad_prl ${NAME}.versioned.kicad_pro-bak ${NAME}.versioned.xml ${NAME}.versioned.csv
 	rm -f ${IBOM}
 	rm -rf ${FABRICATION_DIR}
-	rm -f panel.versioned.json panel.kicad_pcb panel.kicad_pro panel.brd-top.svg panel.brd-bot.svg panel.brd-top.png panel.brd-bot.png
+	rm -f panel.kicad_pcb panel.kicad_pro 
 	rm -rf ${PANEL_DIR}
--- a/README.md
+++ b/README.md
@ -1,7 +1,60 @@
-these are the hardware design files for **insert project name here**.
+these are the hardware design files for the RPH0002 battery connector.
+the RPH0002 is a battery pack manufactured by Jinyun Reypu Electronic Technology and used in [OKAI ES400B](https://eu.okai.co/pages/es400b) escooter.

 purpose
 =======

+this connector allows the RPH0002 battery to be used a standalone, independently of the escooter.
+
 usage
 =====
+
+plug the connector in either way since it's reversible.
+toggle the switch to on, and the nearby red LED should light up.
+you are ready to use the battery.
+use the XT60 connector to easily connect wires to the battery.
+
+use the DC barrel jack connector (5.0 mm OD, 2.1 mm ID) to charge the battery.
+the charger should be for a 13S battery pack, up to 54.6V, and 5A.
+when charging, the % should blink, and the charging level displayed.
+
+when the switch is toggled to off, the battery light turns red.
+this clears after 10 minutes.
+
+mode of operation
+=================
+
+the 14 slots on the bottom of the battery are for tab plugs, up to 1.5 mm thick, 6.5 mm wide, and 15 mm high.
+these are pretty unusual though.
+the closest PCB tabs I found are 0.8 mm thick (very usual), 6.35 mm wide (common), and 11.97 mm high (quite high).
+
+the signal of each tab is written next to it on the back.
+each signal appears twice because the connector is reversible.
+this prevents any issue when the battery is mounted the other way around in the escooter, even if there is only one way to lock it in.
+it also allows to have redundant connections, and increases the contact surface, allowing for letting more current to run through.
+the two signals are interconnected in the battery, and is this connector.
+
+for the battery to turn on, the output needs to the constantly connected to the sense signal.
+this is what the switch does.
+the output current is limited to 1 A.
+over that, the Battery Management System (BMS) will turn off the output after 5 seconds.
+the output will be turned back on after 1 minute.
+to turn the output completely off, just leave the sense signal floating.
+when the sense signal is connected to ground, the output will reset periodically and the battery light will blink red.
+
+on the bottom part there is a ESP32-C3 micro-controller (MCU).
+this will send CAN messages to the battery to activate it, and allow drawing more that 1 A.
+it is power by the battery (initially limited to 1 A after switch on), stepped down from 55V to 5V using a DC to DC buck converter, and regulated to 3.3V by an LDO.
+the MCU can be programmed and debugged through the USB port or 2x3 UART header.
+I used a ESP32-C3-WROOM-02N4 module to also provide the battery level information over Bluetooth Low Energy (BLE).
+
+when the MCU is powered and able to activate the battery, the green LED remains light up.
+to activate the battery, it sends the two following messages periodically:
+
+- identifier: 0x03FF1602, data: 0xF243270000000000
+- identifier: 0x02FF2602, data: 0x9840ECDB09D1690B
+
+if these two messages are not acknowledged by the battery, the green light will blink.
+when CAN messages are transmitted or received, the blue light will blink.
+the CAN pin header allows to connect to the bus.
+the termination resistor is next to it.
--- a/RPH0002_connector.kicad_pcb
+++ b/RPH0002_connector.kicad_pcb
--- a/RPH0002_connector.kicad_pro
+++ b/RPH0002_connector.kicad_pro
@ -3,17 +3,14 @@
    "3dviewports": [],
    "design_settings": {
      "defaults": {
-        "apply_defaults_to_fp_fields": false,
-        "apply_defaults_to_fp_shapes": false,
-        "apply_defaults_to_fp_text": false,
-        "board_outline_line_width": 0.05,
-        "copper_line_width": 0.2,
+        "board_outline_line_width": 0.049999999999999996,
+        "copper_line_width": 0.19999999999999998,
        "copper_text_italic": false,
        "copper_text_size_h": 1.5,
        "copper_text_size_v": 1.5,
        "copper_text_thickness": 0.3,
        "copper_text_upright": false,
-        "courtyard_line_width": 0.05,
+        "courtyard_line_width": 0.049999999999999996,
        "dimension_precision": 4,
        "dimension_units": 3,
        "dimensions": {
@ -24,7 +21,7 @@
          "text_position": 0,
          "units_format": 1
        },
-        "fab_line_width": 0.1,
+        "fab_line_width": 0.09999999999999999,
        "fab_text_italic": false,
        "fab_text_size_h": 1.0,
        "fab_text_size_v": 1.0,
@ -37,9 +34,9 @@
        "other_text_thickness": 0.15,
        "other_text_upright": false,
        "pads": {
-          "drill": 0.762,
-          "height": 1.524,
-          "width": 1.524
+          "drill": 1.7,
+          "height": 2.55,
+          "width": 2.55
        },
        "silk_line_width": 0.15,
        "silk_text_italic": false,
@ -49,7 +46,7 @@
        "silk_text_upright": false,
        "zones": {
          "45_degree_only": false,
-          "min_clearance": 0.508
+          "min_clearance": 0.3
        }
      },
      "diff_pair_dimensions": [
@ -57,11 +54,6 @@
          "gap": 0.0,
          "via_gap": 0.0,
          "width": 0.0
-        },
-        {
-          "gap": 0.43,
-          "via_gap": 0.0,
-          "width": 0.2
        }
      ],
      "drc_exclusions": [],
@ -81,8 +73,7 @@
        "duplicate_footprints": "warning",
        "extra_footprint": "warning",
        "footprint": "error",
-        "footprint_symbol_mismatch": "warning",
-        "footprint_type_mismatch": "warning",
+        "footprint_type_mismatch": "error",
        "hole_clearance": "error",
        "hole_near_hole": "error",
        "invalid_outline": "error",
@ -90,7 +81,7 @@
        "item_on_disabled_layer": "error",
        "items_not_allowed": "error",
        "length_out_of_range": "error",
-        "lib_footprint_issues": "ignore",
+        "lib_footprint_issues": "warning",
        "lib_footprint_mismatch": "ignore",
        "malformed_courtyard": "error",
        "microvia_drill_out_of_range": "error",
@ -103,7 +94,7 @@
        "shorting_items": "error",
        "silk_edge_clearance": "ignore",
        "silk_over_copper": "warning",
-        "silk_overlap": "warning",
+        "silk_overlap": "ignore",
        "skew_out_of_range": "error",
        "solder_mask_bridge": "error",
        "starved_thermal": "error",
@ -117,7 +108,6 @@
        "unconnected_items": "error",
        "unresolved_variable": "error",
        "via_dangling": "warning",
-        "zone_has_empty_net": "error",
        "zones_intersect": "error"
      },
      "rules": {
@ -125,27 +115,30 @@
        "allow_microvias": false,
        "max_error": 0.005,
        "min_clearance": 0.127,
-        "min_connection": 0.127,
-        "min_copper_edge_clearance": 0.3,
+        "min_connection": 0.0,
+        "min_copper_edge_clearance": 0.19999999999999998,
        "min_hole_clearance": 0.254,
        "min_hole_to_hole": 0.254,
-        "min_microvia_diameter": 0.2,
-        "min_microvia_drill": 0.1,
+        "min_microvia_diameter": 0.19999999999999998,
+        "min_microvia_drill": 0.09999999999999999,
        "min_resolved_spokes": 2,
-        "min_silk_clearance": 0.15,
-        "min_text_height": 1.0,
-        "min_text_thickness": 0.153,
+        "min_silk_clearance": 0.0,
+        "min_text_height": 0.7999999999999999,
+        "min_text_thickness": 0.08,
        "min_through_hole_diameter": 0.3,
        "min_track_width": 0.127,
        "min_via_annular_width": 0.13,
        "min_via_diameter": 0.5,
        "solder_mask_clearance": 0.0,
        "solder_mask_min_width": 0.0,
-        "solder_mask_to_copper_clearance": 0.05,
+        "solder_mask_to_copper_clearance": 0.0,
        "use_height_for_length_calcs": true
      },
      "teardrop_options": [
        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 5,
+          "td_on_pad_in_zone": false,
          "td_onpadsmd": true,
          "td_onroundshapesonly": false,
          "td_ontrackend": false,
@ -154,72 +147,40 @@
      ],
      "teardrop_parameters": [
        {
-          "td_allow_use_two_tracks": true,
          "td_curve_segcount": 0,
          "td_height_ratio": 1.0,
          "td_length_ratio": 0.5,
          "td_maxheight": 2.0,
          "td_maxlen": 1.0,
-          "td_on_pad_in_zone": false,
          "td_target_name": "td_round_shape",
          "td_width_to_size_filter_ratio": 0.9
        },
        {
-          "td_allow_use_two_tracks": true,
          "td_curve_segcount": 0,
          "td_height_ratio": 1.0,
          "td_length_ratio": 0.5,
          "td_maxheight": 2.0,
          "td_maxlen": 1.0,
-          "td_on_pad_in_zone": false,
          "td_target_name": "td_rect_shape",
          "td_width_to_size_filter_ratio": 0.9
        },
        {
-          "td_allow_use_two_tracks": true,
          "td_curve_segcount": 0,
          "td_height_ratio": 1.0,
          "td_length_ratio": 0.5,
          "td_maxheight": 2.0,
          "td_maxlen": 1.0,
-          "td_on_pad_in_zone": false,
          "td_target_name": "td_track_end",
          "td_width_to_size_filter_ratio": 0.9
        }
      ],
      "track_widths": [
        0.0,
-        0.127,
-        0.2,
+        0.15,
        0.3,
-        0.5
+        0.5,
+        1.5
      ],
-      "tuning_pattern_settings": {
-        "diff_pair_defaults": {
-          "corner_radius_percentage": 80,
-          "corner_style": 1,
-          "max_amplitude": 1.0,
-          "min_amplitude": 0.2,
-          "single_sided": false,
-          "spacing": 1.0
-        },
-        "diff_pair_skew_defaults": {
-          "corner_radius_percentage": 80,
-          "corner_style": 1,
-          "max_amplitude": 1.0,
-          "min_amplitude": 0.2,
-          "single_sided": false,
-          "spacing": 0.6
-        },
-        "single_track_defaults": {
-          "corner_radius_percentage": 80,
-          "corner_style": 1,
-          "max_amplitude": 1.0,
-          "min_amplitude": 0.2,
-          "single_sided": false,
-          "spacing": 0.6
-        }
-      },
      "via_dimensions": [
        {
          "diameter": 0.0,
@ -232,22 +193,11 @@
        {
          "diameter": 0.8,
          "drill": 0.4
-        },
-        {
-          "diameter": 1.0,
-          "drill": 0.5
        }
      ],
      "zones_allow_external_fillets": false,
      "zones_use_no_outline": true
    },
-    "ipc2581": {
-      "dist": "",
-      "distpn": "",
-      "internal_id": "",
-      "mfg": "",
-      "mpn": ""
-    },
    "layer_presets": [],
    "viewports": []
  },
@ -471,7 +421,7 @@
    "pinned_symbol_libs": []
  },
  "meta": {
-    "filename": "template.kicad_pro",
+    "filename": "RPH0002_connector.kicad_pro",
    "version": 1
  },
  "net_settings": {
@ -540,75 +490,14 @@
      "gencad": "",
      "idf": "",
      "netlist": "",
-      "plot": "",
-      "pos_files": "",
      "specctra_dsn": "",
      "step": "",
-      "svg": "",
      "vrml": ""
    },
    "page_layout_descr_file": ""
  },
  "schematic": {
    "annotate_start_num": 0,
-    "bom_fmt_presets": [],
-    "bom_fmt_settings": {
-      "field_delimiter": ",",
-      "keep_line_breaks": false,
-      "keep_tabs": false,
-      "name": "CSV",
-      "ref_delimiter": ",",
-      "ref_range_delimiter": "",
-      "string_delimiter": "\""
-    },
-    "bom_presets": [],
-    "bom_settings": {
-      "exclude_dnp": false,
-      "fields_ordered": [
-        {
-          "group_by": false,
-          "label": "Reference",
-          "name": "Reference",
-          "show": true
-        },
-        {
-          "group_by": true,
-          "label": "Value",
-          "name": "Value",
-          "show": true
-        },
-        {
-          "group_by": false,
-          "label": "Datasheet",
-          "name": "Datasheet",
-          "show": true
-        },
-        {
-          "group_by": false,
-          "label": "Footprint",
-          "name": "Footprint",
-          "show": true
-        },
-        {
-          "group_by": false,
-          "label": "Qty",
-          "name": "${QUANTITY}",
-          "show": true
-        },
-        {
-          "group_by": true,
-          "label": "DNP",
-          "name": "${DNP}",
-          "show": true
-        }
-      ],
-      "filter_string": "",
-      "group_symbols": true,
-      "name": "Grouped By Value",
-      "sort_asc": true,
-      "sort_field": "Reference"
-    },
-    "connection_grid_size": 50.0,
    "drawing": {
      "dashed_lines_dash_length_ratio": 12.0,
      "dashed_lines_gap_length_ratio": 3.0,
@ -622,11 +511,6 @@
      "intersheets_ref_suffix": "",
      "junction_size_choice": 3,
      "label_size_ratio": 0.375,
-      "operating_point_overlay_i_precision": 3,
-      "operating_point_overlay_i_range": "~A",
-      "operating_point_overlay_v_precision": 3,
-      "operating_point_overlay_v_range": "~V",
-      "overbar_offset_ratio": 1.23,
      "pin_symbol_size": 25.0,
      "text_offset_ratio": 0.15
    },
@ -652,7 +536,6 @@
    "spice_external_command": "spice \"%I\"",
    "spice_model_current_sheet_as_root": true,
    "spice_save_all_currents": false,
-    "spice_save_all_dissipations": false,
    "spice_save_all_voltages": false,
    "subpart_first_id": 65,
    "subpart_id_separator": 0
@ -660,7 +543,7 @@
  "sheets": [
    [
      "43fc3289-82a7-492c-a423-3030e10115dc",
-      "Root"
+      ""
    ]
  ],
  "text_variables": {}
--- a/RPH0002_connector.kicad_sch
+++ b/RPH0002_connector.kicad_sch
--- a/bom.ini
+++ b/bom.ini
@ -1,7 +1,7 @@
 [BOM_OPTIONS]
 ; General BoM options here
 ; If 'ignore_dnf' option is set to 1, rows that are not to be fitted on the PCB will not be written to the BoM file
-ignore_dnf = 0
+ignore_dnf = 1
 ; If 'html_generate_dnf' option is set to 1, also generate a list of components not fitted on the PCB (HTML only)
 html_generate_dnf = 1
 ; If 'use_alt' option is set to 1, grouped references will be printed in the alternate compressed style eg: R1-R7,R18
@ -23,7 +23,7 @@ variant_file_name_format = _(%V)
 ; Field name used to determine if a particular part is to be fitted
 fit_field = Config
 ; Make a backup of the bom before generating the new one, using the following template
-;make_backup = %O.tmp
+make_backup = %O.tmp
 ; Default number of boards to produce if none given on CLI with -n
 number_boards = 1
 ; Default PCB variant if none given on CLI with -r
@ -45,11 +45,9 @@ sheetpath
 qeda_part
 qeda_variant
 name
-JLCPCB_CORRECTION
-Rating

 [COLUMN_ORDER]
-; Columns will appear in the order they are listed here
+; Columns will apear in the order they are listed here
 ; Titles are case-insensitive
 References
 Value
@ -60,11 +58,10 @@ Part Lib
 Footprint
 Footprint Lib
 Build Quantity
-Manufacturer
-MPN
 DigiKey
 LCSC
 JLCPCB
+JLCPCB_CORRECTION
 Datasheet

 [GROUP_FIELDS]
--- a/kicad/logo.pretty/CuVoodoo_copper.kicad_mod
+++ b/kicad/logo.pretty/CuVoodoo_copper.kicad_mod
@ -1,12 +1,10 @@
-(footprint "CuVoodoo_copper" (version 20221018) (generator pcbnew)
+(footprint "CuVoodoo" (version 20221018) (generator pcbnew)
  (layer "F.Cu")
-  (descr "CuVoodoo logo")
-  (attr smd board_only exclude_from_pos_files exclude_from_bom allow_missing_courtyard)
-  (fp_text reference "REF**" (at 0 -0.5 unlocked) (layer "F.SilkS") hide
+  (fp_text reference "REF**" (at 0 -0.5 unlocked) (layer "F.SilkS")
      (effects (font (size 1 1) (thickness 0.1)))
    (tstamp f846a54a-9ddc-4bbc-be16-9ad293284767)
  )
-  (fp_text value "CuVoodoo_copper" (at 0 1 unlocked) (layer "F.Fab") hide
+  (fp_text value "CuVoodoo" (at 0 1 unlocked) (layer "F.Fab") hide
      (effects (font (size 1 1) (thickness 0.15)))
    (tstamp a2d5c5b6-08b2-4c1d-af6a-961acdb63b34)
  )
--- a/kicad/logo.pretty/CuVoodoo_silk.kicad_mod
+++ b/kicad/logo.pretty/CuVoodoo_silk.kicad_mod
@ -1,617 +0,0 @@
-(footprint "CuVoodoo_silk" (version 20221018) (generator pcbnew)
-  (layer "F.Cu")
-  (attr board_only exclude_from_pos_files exclude_from_bom allow_missing_courtyard)
-  (fp_text reference "REF**" (at 0 -0.5 unlocked) (layer "F.SilkS") hide
-      (effects (font (size 1 1) (thickness 0.1)))
-    (tstamp f846a54a-9ddc-4bbc-be16-9ad293284767)
-  )
-  (fp_text value "CuVoodoo_silk" (at 0 1 unlocked) (layer "F.Fab") hide
-      (effects (font (size 1 1) (thickness 0.15)))
-    (tstamp a2d5c5b6-08b2-4c1d-af6a-961acdb63b34)
-  )
-  (fp_line (start 6 5) (end 6 4)
-    (stroke (width 0.25) (type solid)) (layer "F.SilkS") (tstamp db907c8a-7c13-47f0-8576-f8342c6fc43f))
-  (fp_line (start 8.75 3.75) (end 6.25 3.75)
-    (stroke (width 0.25) (type solid)) (layer "F.SilkS") (tstamp 375d8ca2-9b58-471f-b2aa-d5a472f93281))
-  (fp_arc (start 6 4) (mid 6.073223 3.823223) (end 6.25 3.75)
-    (stroke (width 0.25) (type solid)) (layer "F.SilkS") (tstamp 0af9ea9b-3856-4e16-89c4-11bf31d4c0f6))
-  (fp_poly
-    (pts
-      (xy 1.25 3.999999)
-      (xy 0.5 3.999999)
-      (xy 0.5 3.499999)
-      (xy 1.25 3.499999)
-    )
-
-    (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp d164f9a4-dbe2-44e7-8ad8-2d914a8f7a6c))
-  (fp_poly
-    (pts
-      (xy 3.749999 9.499998)
-      (xy 3.499999 9.499998)
-      (xy 3.499999 8.999998)
-      (xy 3.749999 8.999998)
-    )
-
-    (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 028a1ea9-a14e-4d86-884a-794e4e371399))
-  (fp_poly
-    (pts
-      (xy 6.249999 9.499998)
-      (xy 5.999999 9.499998)
-      (xy 5.999999 8.999998)
-      (xy 6.249999 8.999998)
-    )
-
-    (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 6183cedd-1b0c-488e-b67c-11b1d2d2911f))
-  (fp_poly
-    (pts
-      (xy 9.499998 3.999999)
-      (xy 8.749998 3.999999)
-      (xy 8.749998 3.499999)
-      (xy 9.499998 3.499999)
-    )
-
-    (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 9f335a7b-79ff-4f78-b12d-8e0ae29f952f))
-  (fp_poly
-    (pts
-      (xy 4.499999 4.749999)
-      (xy 3.999999 4.749999)
-      (xy 3.999999 5.749999)
-      (xy 4.749999 5.749999)
-      (xy 4.749999 6.249999)
-      (xy 3.499999 6.249999)
-      (xy 3.499999 4.249999)
-      (xy 4.499999 4.249999)
-    )
-
-    (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp b5fef6d2-7e7e-4965-bcdc-f4722e8267a7))
-  (fp_poly
-    (pts
-      (xy 6.249999 6.249999)
-      (xy 4.999999 6.249999)
-      (xy 4.999999 5.499999)
-      (xy 5.499999 5.499999)
-      (xy 5.499999 5.749999)
-      (xy 5.749999 5.749999)
-      (xy 5.749999 4.999999)
-      (xy 6.249999 4.999999)
-    )
-
-    (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 8bb02f0d-c4a1-49c9-a185-6c1be76e4313))
-  (fp_poly
-    (pts
-      (xy 4.750097 1.749764)
-      (xy 3.999755 1.749764)
-      (xy 3.999755 1.250053)
-      (xy 4.249869 1.250053)
-      (xy 4.249869 1.500167)
-      (xy 4.499983 1.500167)
-      (xy 4.499983 1.250053)
-      (xy 4.249869 1.250053)
-      (xy 3.999755 1.250053)
-      (xy 3.999755 0.999939)
-      (xy 4.750097 0.999939)
-    )
-
-    (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 3d4db89c-b5bd-4689-87d8-3730cf8df8f4))
-  (fp_poly
-    (pts
-      (xy 4.499999 6.499999)
-      (xy 4.249999 6.749999)
-      (xy 3.849999 6.749999)
-      (xy 3.749999 6.849998)
-      (xy 3.749999 8.999998)
-      (xy 3.499999 8.999998)
-      (xy 3.499999 6.749999)
-      (xy 3.749999 6.499999)
-      (xy 4.149999 6.499999)
-      (xy 4.249999 6.399999)
-      (xy 4.249999 6.249999)
-      (xy 4.499999 6.249999)
-    )
-
-    (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp f8a10a30-88d4-4521-a785-068b4a34a6b4))
-  (fp_poly
-    (pts
-      (xy 5.099999 3.949999)
-      (xy 5.099999 4.299999)
-      (xy 4.799999 4.599999)
-      (xy 4.499999 4.599999)
-      (xy 4.499999 4.399999)
-      (xy 4.749999 4.399999)
-      (xy 4.899999 4.249999)
-      (xy 4.899999 3.999999)
-      (xy 4.749999 3.849999)
-      (xy 1.25 3.849999)
-      (xy 1.25 3.649999)
-      (xy 4.799999 3.649999)
-    )
-
-    (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp fafbca33-bd8b-4e58-9b6e-99199a1e20ef))
-  (fp_poly
-    (pts
-      (xy 6.499999 2.75)
-      (xy 9.999998 2.75)
-      (xy 9.999998 4.749999)
-      (xy 6.999999 4.749999)
-      (xy 6.999999 9.999998)
-      (xy 5.249999 9.999998)
-      (xy 5.249999 7.499999)
-      (xy 4.499999 7.499999)
-      (xy 4.499999 9.999998)
-      (xy 2.75 9.999998)
-      (xy 2.75 4.749999)
-      (xy 0 4.749999)
-      (xy 0 4.249999)
-      (xy 0.5 4.249999)
-      (xy 3.25 4.249999)
-      (xy 3.25 9.499998)
-      (xy 3.999999 9.499998)
-      (xy 3.999999 6.999999)
-      (xy 5.749999 6.999999)
-      (xy 5.749999 9.499998)
-      (xy 6.499999 9.499998)
-      (xy 6.499999 4.249999)
-      (xy 9.499998 4.249999)
-      (xy 9.499998 3.25)
-      (xy 5.999999 3.25)
-      (xy 5.999999 0.5)
-      (xy 3.749999 0.5)
-      (xy 3.749999 3.25)
-      (xy 0.5 3.25)
-      (xy 0.5 4.249999)
-      (xy 0 4.249999)
-      (xy 0 2.75)
-      (xy 3.25 2.75)
-      (xy 3.25 0)
-      (xy 6.499999 0)
-    )
-
-    (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 48b3982a-b0ef-4bdd-846c-4ec519a8d5bc))
-  (fp_poly
-    (pts
-      (xy 5.499999 6.499999)
-      (xy 5.999999 6.499999)
-      (xy 6.013914 6.50029)
-      (xy 6.027526 6.501159)
-      (xy 6.040827 6.502595)
-      (xy 6.053808 6.504589)
-      (xy 6.066459 6.507133)
-      (xy 6.078771 6.510216)
-      (xy 6.090735 6.513831)
-      (xy 6.102343 6.517968)
-      (xy 6.113584 6.522617)
-      (xy 6.12445 6.52777)
-      (xy 6.134931 6.533417)
-      (xy 6.145019 6.53955)
-      (xy 6.154703 6.546158)
-      (xy 6.163976 6.553234)
-      (xy 6.172828 6.560767)
-      (xy 6.181249 6.568749)
-      (xy 6.189231 6.57717)
-      (xy 6.196764 6.586022)
-      (xy 6.20384 6.595295)
-      (xy 6.210448 6.604979)
-      (xy 6.216581 6.615067)
-      (xy 6.222228 6.625548)
-      (xy 6.227381 6.636414)
-      (xy 6.23203 6.647655)
-      (xy 6.236167 6.659262)
-      (xy 6.239782 6.671227)
-      (xy 6.242866 6.683539)
-      (xy 6.245409 6.69619)
-      (xy 6.247404 6.709171)
-      (xy 6.248839 6.722472)
-      (xy 6.249708 6.736084)
-      (xy 6.249999 6.749999)
-      (xy 6.249999 8.999998)
-      (xy 5.999999 8.999998)
-      (xy 5.999999 6.749999)
-      (xy 5.499999 6.749999)
-      (xy 5.486085 6.749707)
-      (xy 5.472472 6.748839)
-      (xy 5.459171 6.747403)
-      (xy 5.446191 6.745409)
-      (xy 5.43354 6.742865)
-      (xy 5.421227 6.739781)
-      (xy 5.409263 6.736167)
-      (xy 5.397655 6.73203)
-      (xy 5.386414 6.727381)
-      (xy 5.375549 6.722228)
-      (xy 5.365067 6.71658)
-      (xy 5.35498 6.710448)
-      (xy 5.345295 6.703839)
-      (xy 5.336022 6.696764)
-      (xy 5.327171 6.689231)
-      (xy 5.318749 6.681249)
-      (xy 5.310767 6.672828)
-      (xy 5.303234 6.663976)
-      (xy 5.296159 6.654703)
-      (xy 5.28955 6.645018)
-      (xy 5.283417 6.634931)
-      (xy 5.27777 6.62445)
-      (xy 5.272617 6.613584)
-      (xy 5.267968 6.602343)
-      (xy 5.263831 6.590735)
-      (xy 5.260216 6.578771)
-      (xy 5.257133 6.566459)
-      (xy 5.254589 6.553808)
-      (xy 5.252595 6.540827)
-      (xy 5.251159 6.527526)
-      (xy 5.25029 6.513914)
-      (xy 5.249999 6.499999)
-      (xy 5.249999 6.249999)
-      (xy 5.499999 6.249999)
-    )
-
-    (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 2e49765d-7fab-447c-af5f-c96b846f80fb))
-  (fp_poly
-    (pts
-      (xy 4.649999 2.599999)
-      (xy 4.999999 2.25)
-      (xy 5.00483 2.245459)
-      (xy 5.009936 2.24121)
-      (xy 5.015297 2.237255)
-      (xy 5.020897 2.233593)
-      (xy 5.026717 2.230224)
-      (xy 5.032738 2.227148)
-      (xy 5.038942 2.224365)
-      (xy 5.045311 2.221875)
-      (xy 5.051827 2.219677)
-      (xy 5.058471 2.217773)
-      (xy 5.065224 2.216162)
-      (xy 5.072069 2.214843)
-      (xy 5.085961 2.213085)
-      (xy 5.099999 2.2125)
-      (xy 5.114037 2.213085)
-      (xy 5.127928 2.214843)
-      (xy 5.134774 2.216162)
-      (xy 5.141527 2.217773)
-      (xy 5.148171 2.219677)
-      (xy 5.154686 2.221875)
-      (xy 5.161055 2.224365)
-      (xy 5.16726 2.227148)
-      (xy 5.173281 2.230224)
-      (xy 5.1791 2.233593)
-      (xy 5.1847 2.237255)
-      (xy 5.190062 2.24121)
-      (xy 5.195168 2.245459)
-      (xy 5.199999 2.25)
-      (xy 5.549999 2.599999)
-      (xy 5.699999 2.450001)
-      (xy 5.709511 2.441349)
-      (xy 5.719262 2.434107)
-      (xy 5.729195 2.428221)
-      (xy 5.739257 2.423634)
-      (xy 5.749392 2.420292)
-      (xy 5.759545 2.418141)
-      (xy 5.769661 2.417124)
-      (xy 5.779687 2.417188)
-      (xy 5.789565 2.418278)
-      (xy 5.799242 2.420338)
-      (xy 5.808663 2.423313)
-      (xy 5.817772 2.427149)
-      (xy 5.826516 2.431791)
-      (xy 5.834838 2.437183)
-      (xy 5.842684 2.443272)
-      (xy 5.849999 2.450001)
-      (xy 5.856728 2.457316)
-      (xy 5.862816 2.465162)
-      (xy 5.868209 2.473484)
-      (xy 5.872851 2.482227)
-      (xy 5.876687 2.491337)
-      (xy 5.879662 2.500758)
-      (xy 5.881722 2.510435)
-      (xy 5.882811 2.520313)
-      (xy 5.882876 2.530338)
-      (xy 5.881859 2.540455)
-      (xy 5.879708 2.550608)
-      (xy 5.876366 2.560743)
-      (xy 5.871779 2.570805)
-      (xy 5.865892 2.580738)
-      (xy 5.858651 2.590489)
-      (xy 5.849999 2.600001)
-      (xy 5.649999 2.799999)
-      (xy 5.645168 2.80454)
-      (xy 5.640062 2.808788)
-      (xy 5.6347 2.812743)
-      (xy 5.6291 2.816405)
-      (xy 5.623281 2.819775)
-      (xy 5.61726 2.822851)
-      (xy 5.611055 2.825634)
-      (xy 5.604686 2.828124)
-      (xy 5.598171 2.830321)
-      (xy 5.591527 2.832226)
-      (xy 5.584774 2.833837)
-      (xy 5.577929 2.835155)
-      (xy 5.564037 2.836913)
-      (xy 5.549999 2.837499)
-      (xy 5.535961 2.836913)
-      (xy 5.522069 2.835155)
-      (xy 5.515224 2.833837)
-      (xy 5.508471 2.832226)
-      (xy 5.501827 2.830321)
-      (xy 5.495311 2.828124)
-      (xy 5.488942 2.825634)
-      (xy 5.482738 2.822851)
-      (xy 5.476717 2.819775)
-      (xy 5.470897 2.816405)
-      (xy 5.465297 2.812743)
-      (xy 5.459935 2.808788)
-      (xy 5.45483 2.80454)
-      (xy 5.449999 2.799999)
-      (xy 5.099999 2.449999)
-      (xy 4.699999 2.849999)
-      (xy 4.599999 2.849999)
-      (xy 4.199999 2.449999)
-      (xy 3.999999 2.649999)
-      (xy 3.849999 2.499999)
-      (xy 4.149999 2.199999)
-      (xy 4.249999 2.199999)
-    )
-
-    (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 8e7e8123-55b6-4162-bc6d-b7ccbc23c7b7))
-  (fp_poly
-    (pts
-      (xy 5.39343 1.00039)
-      (xy 5.411911 1.001755)
-      (xy 5.430234 1.004022)
-      (xy 5.448371 1.007178)
-      (xy 5.466289 1.01121)
-      (xy 5.483958 1.016105)
-      (xy 5.501347 1.021851)
-      (xy 5.518425 1.028435)
-      (xy 5.535162 1.035845)
-      (xy 5.551527 1.044066)
-      (xy 5.567488 1.053088)
-      (xy 5.583016 1.062896)
-      (xy 5.598079 1.073479)
-      (xy 5.612646 1.084823)
-      (xy 5.626688 1.096916)
-      (xy 5.640172 1.109744)
-      (xy 5.653004 1.123226)
-      (xy 5.6651 1.137264)
-      (xy 5.676447 1.15183)
-      (xy 5.687033 1.166891)
-      (xy 5.696845 1.182417)
-      (xy 5.70587 1.198377)
-      (xy 5.714095 1.214741)
-      (xy 5.721508 1.231478)
-      (xy 5.728096 1.248557)
-      (xy 5.733846 1.265948)
-      (xy 5.738745 1.283619)
-      (xy 5.742781 1.30154)
-      (xy 5.745941 1.31968)
-      (xy 5.748212 1.338009)
-      (xy 5.749581 1.356496)
-      (xy 5.750036 1.37511)
-      (xy 5.749531 1.3944)
-      (xy 5.748066 1.413437)
-      (xy 5.745665 1.432196)
-      (xy 5.742353 1.450655)
-      (xy 5.738151 1.468788)
-      (xy 5.733084 1.486574)
-      (xy 5.727176 1.503988)
-      (xy 5.72045 1.521007)
-      (xy 5.712929 1.537607)
-      (xy 5.704638 1.553765)
-      (xy 5.695599 1.569458)
-      (xy 5.685836 1.584661)
-      (xy 5.675373 1.599352)
-      (xy 5.664233 1.613506)
-      (xy 5.65244 1.6271)
-      (xy 5.640018 1.640112)
-      (xy 5.62699 1.652516)
-      (xy 5.613379 1.66429)
-      (xy 5.599209 1.67541)
-      (xy 5.584504 1.685853)
-      (xy 5.569287 1.695594)
-      (xy 5.553582 1.704612)
-      (xy 5.537412 1.712881)
-      (xy 5.520802 1.720379)
-      (xy 5.503773 1.727081)
-      (xy 5.486351 1.732966)
-      (xy 5.468558 1.738008)
-      (xy 5.450418 1.742184)
-      (xy 5.431955 1.745472)
-      (xy 5.413192 1.747846)
-      (xy 5.394153 1.749285)
-      (xy 5.374862 1.749764)
-      (xy 5.35559 1.749259)
-      (xy 5.336571 1.747797)
-      (xy 5.317828 1.7454)
-      (xy 5.299386 1.742093)
-      (xy 5.281268 1.737899)
-      (xy 5.263497 1.732841)
-      (xy 5.246096 1.726943)
-      (xy 5.22909 1.720229)
-      (xy 5.212501 1.712721)
-      (xy 5.196353 1.704443)
-      (xy 5.18067 1.695419)
-      (xy 5.165475 1.685672)
-      (xy 5.150791 1.675226)
-      (xy 5.136642 1.664104)
-      (xy 5.123052 1.65233)
-      (xy 5.110043 1.639927)
-      (xy 5.09764 1.626918)
-      (xy 5.085866 1.613328)
-      (xy 5.074744 1.599179)
-      (xy 5.064299 1.584495)
-      (xy 5.054552 1.5693)
-      (xy 5.045528 1.553617)
-      (xy 5.037251 1.537469)
-      (xy 5.029743 1.52088)
-      (xy 5.023029 1.503874)
-      (xy 5.017131 1.486473)
-      (xy 5.012074 1.468702)
-      (xy 5.00788 1.450584)
-      (xy 5.004573 1.432142)
-      (xy 5.002177 1.4134)
-      (xy 5.000715 1.394382)
-      (xy 5.000211 1.37511)
-      (xy 5.249807 1.37511)
-      (xy 5.249958 1.381312)
-      (xy 5.250414 1.387472)
-      (xy 5.25117 1.39358)
-      (xy 5.252223 1.399625)
-      (xy 5.253568 1.405598)
-      (xy 5.2552 1.411487)
-      (xy 5.257116 1.417283)
-      (xy 5.259311 1.422976)
-      (xy 5.261782 1.428554)
-      (xy 5.264523 1.434009)
-      (xy 5.267531 1.439329)
-      (xy 5.270801 1.444505)
-      (xy 5.274329 1.449525)
-      (xy 5.278111 1.454381)
-      (xy 5.282142 1.459061)
-      (xy 5.286419 1.463555)
-      (xy 5.290913 1.467832)
-      (xy 5.295593 1.471863)
-      (xy 5.300449 1.475645)
-      (xy 5.305469 1.479173)
-      (xy 5.310644 1.482443)
-      (xy 5.315964 1.485451)
-      (xy 5.321418 1.488192)
-      (xy 5.326997 1.490662)
-      (xy 5.332688 1.492858)
-      (xy 5.338484 1.494774)
-      (xy 5.344372 1.496406)
-      (xy 5.350343 1.497751)
-      (xy 5.356387 1.498803)
-      (xy 5.362493 1.49956)
-      (xy 5.368651 1.500016)
-      (xy 5.374851 1.500167)
-      (xy 5.381053 1.500016)
-      (xy 5.387213 1.499561)
-      (xy 5.393321 1.498806)
-      (xy 5.399366 1.497754)
-      (xy 5.405339 1.49641)
-      (xy 5.411229 1.494778)
-      (xy 5.417025 1.492862)
-      (xy 5.422718 1.490668)
-      (xy 5.428297 1.488198)
-      (xy 5.433752 1.485457)
-      (xy 5.439072 1.48245)
-      (xy 5.444248 1.479181)
-      (xy 5.449269 1.475653)
-      (xy 5.454125 1.471872)
-      (xy 5.458805 1.467841)
-      (xy 5.4633 1.463565)
-      (xy 5.467577 1.459071)
-      (xy 5.471609 1.454392)
-      (xy 5.475392 1.449536)
-      (xy 5.478921 1.444516)
-      (xy 5.482191 1.439341)
-      (xy 5.485199 1.434021)
-      (xy 5.487941 1.428566)
-      (xy 5.490412 1.422987)
-      (xy 5.492608 1.417294)
-      (xy 5.494525 1.411497)
-      (xy 5.496158 1.405607)
-      (xy 5.497503 1.399633)
-      (xy 5.498557 1.393586)
-      (xy 5.499314 1.387476)
-      (xy 5.49977 1.381314)
-      (xy 5.499922 1.37511)
-      (xy 5.499771 1.368908)
-      (xy 5.499315 1.362747)
-      (xy 5.498559 1.35664)
-      (xy 5.497506 1.350594)
-      (xy 5.496161 1.344622)
-      (xy 5.494529 1.338732)
-      (xy 5.492613 1.332936)
-      (xy 5.490418 1.327243)
-      (xy 5.487947 1.321665)
-      (xy 5.485206 1.31621)
-      (xy 5.482198 1.31089)
-      (xy 5.478928 1.305715)
-      (xy 5.4754 1.300694)
-      (xy 5.471618 1.295839)
-      (xy 5.467587 1.291159)
-      (xy 5.46331 1.286664)
-      (xy 5.458815 1.282387)
-      (xy 5.454135 1.278356)
-      (xy 5.44928 1.274574)
-      (xy 5.444259 1.271046)
-      (xy 5.439084 1.267776)
-      (xy 5.433764 1.264768)
-      (xy 5.428309 1.262027)
-      (xy 5.422731 1.259557)
-      (xy 5.417038 1.257361)
-      (xy 5.411242 1.255445)
-      (xy 5.405352 1.253813)
-      (xy 5.39938 1.252468)
-      (xy 5.393335 1.251416)
-      (xy 5.387227 1.250659)
-      (xy 5.381067 1.250204)
-      (xy 5.374865 1.250053)
-      (xy 5.37486 1.250053)
-      (xy 5.368658 1.250204)
-      (xy 5.362498 1.25066)
-      (xy 5.35639 1.251416)
-      (xy 5.350345 1.252469)
-      (xy 5.344372 1.253814)
-      (xy 5.338483 1.255447)
-      (xy 5.332687 1.257363)
-      (xy 5.326994 1.259558)
-      (xy 5.321416 1.262029)
-      (xy 5.315961 1.26477)
-      (xy 5.310641 1.267778)
-      (xy 5.305466 1.271048)
-      (xy 5.300445 1.274577)
-      (xy 5.29559 1.278359)
-      (xy 5.29091 1.28239)
-      (xy 5.286416 1.286667)
-      (xy 5.282139 1.291162)
-      (xy 5.278108 1.295842)
-      (xy 5.274326 1.300697)
-      (xy 5.270799 1.305718)
-      (xy 5.267529 1.310893)
-      (xy 5.264521 1.316214)
-      (xy 5.26178 1.321668)
-      (xy 5.25931 1.327247)
-      (xy 5.257115 1.332939)
-      (xy 5.255199 1.338735)
-      (xy 5.253567 1.344624)
-      (xy 5.252222 1.350596)
-      (xy 5.25117 1.356641)
-      (xy 5.250414 1.362749)
-      (xy 5.249958 1.368908)
-      (xy 5.249807 1.37511)
-      (xy 5.000211 1.37511)
-      (xy 5.00069 1.355818)
-      (xy 5.002128 1.33678)
-      (xy 5.004503 1.318017)
-      (xy 5.00779 1.299554)
-      (xy 5.011967 1.281415)
-      (xy 5.017009 1.263622)
-      (xy 5.022893 1.2462)
-      (xy 5.029596 1.229172)
-      (xy 5.037094 1.212561)
-      (xy 5.045363 1.196392)
-      (xy 5.05438 1.180687)
-      (xy 5.064122 1.16547)
-      (xy 5.074565 1.150765)
-      (xy 5.085685 1.136595)
-      (xy 5.097459 1.122985)
-      (xy 5.109863 1.109957)
-      (xy 5.122874 1.097534)
-      (xy 5.136468 1.085742)
-      (xy 5.150623 1.074602)
-      (xy 5.165313 1.064139)
-      (xy 5.180516 1.054376)
-      (xy 5.196209 1.045337)
-      (xy 5.212367 1.037046)
-      (xy 5.228967 1.029525)
-      (xy 5.245986 1.022799)
-      (xy 5.2634 1.016891)
-      (xy 5.281186 1.011824)
-      (xy 5.29932 1.007622)
-      (xy 5.317778 1.00431)
-      (xy 5.336537 1.001909)
-      (xy 5.355574 1.000444)
-      (xy 5.374843 0.999939)
-    )
-
-    (stroke (width 0) (type solid)) (fill solid) (layer "F.SilkS") (tstamp 1d08b000-bccf-4492-b816-54c8d5779b32))
-)
--- a/kicad/logo.pretty/OSHW.kicad_mod
+++ b/kicad/logo.pretty/OSHW.kicad_mod
@ -1,6 +1,6 @@
 (footprint "OSHW" (version 20221018) (generator pcbnew)
  (layer "F.Cu")
-  (attr board_only exclude_from_pos_files exclude_from_bom allow_missing_courtyard)
+  (attr smd)
  (fp_text reference "REF**" (at 0 -0.5 unlocked) (layer "F.SilkS") hide
      (effects (font (size 1 1) (thickness 0.1)))
    (tstamp f1e067ff-287b-4a60-b936-f32f4b57d565)
--- a/kicad/logo.pretty/bunny.kicad_mod
+++ b/kicad/logo.pretty/bunny.kicad_mod
@ -1,7 +1,5 @@
 (footprint "bunny" (version 20221018) (generator pcbnew)
  (layer "F.Cu")
-  (descr "design year indication")
-  (attr board_only exclude_from_pos_files exclude_from_bom allow_missing_courtyard)
  (fp_text reference "REF**" (at 0 -0.5 unlocked) (layer "F.SilkS") hide
      (effects (font (size 1 1) (thickness 0.1)))
    (tstamp 4e2c9664-f6ac-467e-880e-cb2256b0c6f7)
--- a/kicad/logo/bunny.svg
+++ b/kicad/logo/bunny.svg
--- a/kicad/logo/dragon.svg
+++ b/kicad/logo/dragon.svg
--- a/kicad/partdb.kicad_dbl
+++ b/kicad/partdb.kicad_dbl
--- a/kicad/qeda.3dshapes/CAPC5750X220N.wrl
+++ b/kicad/qeda.3dshapes/CAPC5750X220N.wrl
@ -0,0 +1,35 @@
+#VRML V2.0 utf8
+Shape {
+  appearance Appearance {
+    material Material {
+    diffuseColor 0.37 0.37 0.37
+    emissiveColor 0.0 0.0 0.0
+    specularColor 1.0 1.0 1.0
+    ambientIntensity 1.0
+    transparency 0.5
+    shininess 1.0
+    }
+  }
+  geometry IndexedFaceSet {
+    coord Coordinate {
+      point [
+        -2.5 -2.8499999999999996 0,
+        2.5 -2.8499999999999996 0,
+        2.5 2.8499999999999996 0,
+        -2.5 2.8499999999999996 0,
+        -2.5 -2.8499999999999996 2.2,
+        2.5 -2.8499999999999996 2.2,
+        2.5 2.8499999999999996 2.2,
+        -2.5 2.8499999999999996 2.2
+      ]
+    }
+    coordIndex [
+      0,1,2,3,-1
+      4,5,6,7,-1
+      0,1,5,4,-1
+      2,3,7,6,-1
+      0,3,7,4,-1
+      1,2,6,5,-1
+    ]
+  }
+}
--- a/kicad/qeda.3dshapes/CAPPRD200W45D500H700N.wrl
+++ b/kicad/qeda.3dshapes/CAPPRD200W45D500H700N.wrl
@ -0,0 +1,35 @@
+#VRML V2.0 utf8
+Shape {
+  appearance Appearance {
+    material Material {
+    diffuseColor 0.37 0.37 0.37
+    emissiveColor 0.0 0.0 0.0
+    specularColor 1.0 1.0 1.0
+    ambientIntensity 1.0
+    transparency 0.5
+    shininess 1.0
+    }
+  }
+  geometry IndexedFaceSet {
+    coord Coordinate {
+      point [
+        0 0 0,
+        0 0 0,
+        0 0 0,
+        0 0 0,
+        0 0 7,
+        0 0 7,
+        0 0 7,
+        0 0 7
+      ]
+    }
+    coordIndex [
+      0,1,2,3,-1
+      4,5,6,7,-1
+      0,1,5,4,-1
+      2,3,7,6,-1
+      0,3,7,4,-1
+      1,2,6,5,-1
+    ]
+  }
+}
--- a/kicad/qeda.3dshapes/CONNECTOR_DC-005_2.0.wrl
+++ b/kicad/qeda.3dshapes/CONNECTOR_DC-005_2.0.wrl
@ -0,0 +1,35 @@
+#VRML V2.0 utf8
+Shape {
+  appearance Appearance {
+    material Material {
+    diffuseColor 0.37 0.37 0.37
+    emissiveColor 0.0 0.0 0.0
+    specularColor 1.0 1.0 1.0
+    ambientIntensity 1.0
+    transparency 0.5
+    shininess 1.0
+    }
+  }
+  geometry IndexedFaceSet {
+    coord Coordinate {
+      point [
+        -7.1 -4.4 0,
+        7.1 -4.4 0,
+        7.1 4.4 0,
+        -7.1 4.4 0,
+        -7.1 -4.4 10.8,
+        7.1 -4.4 10.8,
+        7.1 4.4 10.8,
+        -7.1 4.4 10.8
+      ]
+    }
+    coordIndex [
+      0,1,2,3,-1
+      4,5,6,7,-1
+      0,1,5,4,-1
+      2,3,7,6,-1
+      0,3,7,4,-1
+      1,2,6,5,-1
+    ]
+  }
+}
--- a/kicad/qeda.3dshapes/CONNECTOR_HEADER-2.54-1X3.wrl
+++ b/kicad/qeda.3dshapes/CONNECTOR_HEADER-2.54-1X3.wrl
@ -0,0 +1,35 @@
+#VRML V2.0 utf8
+Shape {
+  appearance Appearance {
+    material Material {
+    diffuseColor 0.37 0.37 0.37
+    emissiveColor 0.0 0.0 0.0
+    specularColor 1.0 1.0 1.0
+    ambientIntensity 1.0
+    transparency 0.5
+    shininess 1.0
+    }
+  }
+  geometry IndexedFaceSet {
+    coord Coordinate {
+      point [
+        -1.205 -3.81 0,
+        1.205 -3.81 0,
+        1.205 3.81 0,
+        -1.205 3.81 0,
+        -1.205 -3.81 8.38,
+        1.205 -3.81 8.38,
+        1.205 3.81 8.38,
+        -1.205 3.81 8.38
+      ]
+    }
+    coordIndex [
+      0,1,2,3,-1
+      4,5,6,7,-1
+      0,1,5,4,-1
+      2,3,7,6,-1
+      0,3,7,4,-1
+      1,2,6,5,-1
+    ]
+  }
+}
--- a/kicad/qeda.3dshapes/CONNECTOR_HEADER-2.54-2X3.wrl
+++ b/kicad/qeda.3dshapes/CONNECTOR_HEADER-2.54-2X3.wrl
@ -0,0 +1,35 @@
+#VRML V2.0 utf8
+Shape {
+  appearance Appearance {
+    material Material {
+    diffuseColor 0.37 0.37 0.37
+    emissiveColor 0.0 0.0 0.0
+    specularColor 1.0 1.0 1.0
+    ambientIntensity 1.0
+    transparency 0.5
+    shininess 1.0
+    }
+  }
+  geometry IndexedFaceSet {
+    coord Coordinate {
+      point [
+        -2.415 -3.81 0,
+        2.415 -3.81 0,
+        2.415 3.81 0,
+        -2.415 3.81 0,
+        -2.415 -3.81 8.38,
+        2.415 -3.81 8.38,
+        2.415 3.81 8.38,
+        -2.415 3.81 8.38
+      ]
+    }
+    coordIndex [
+      0,1,2,3,-1
+      4,5,6,7,-1
+      0,1,5,4,-1
+      2,3,7,6,-1
+      0,3,7,4,-1
+      1,2,6,5,-1
+    ]
+  }
+}
--- a/kicad/qeda.3dshapes/CONNECTOR_HRO_TYPE-C-31-M-12.wrl
+++ b/kicad/qeda.3dshapes/CONNECTOR_HRO_TYPE-C-31-M-12.wrl
@ -0,0 +1,35 @@
+#VRML V2.0 utf8
+Shape {
+  appearance Appearance {
+    material Material {
+    diffuseColor 0.37 0.37 0.37
+    emissiveColor 0.0 0.0 0.0
+    specularColor 1.0 1.0 1.0
+    ambientIntensity 1.0
+    transparency 0.5
+    shininess 1.0
+    }
+  }
+  geometry IndexedFaceSet {
+    coord Coordinate {
+      point [
+        -4.47 -3.6500000000000004 0,
+        4.47 -3.6500000000000004 0,
+        4.47 3.6500000000000004 0,
+        -4.47 3.6500000000000004 0,
+        -4.47 -3.6500000000000004 3.21,
+        4.47 -3.6500000000000004 3.21,
+        4.47 3.6500000000000004 3.21,
+        -4.47 3.6500000000000004 3.21
+      ]
+    }
+    coordIndex [
+      0,1,2,3,-1
+      4,5,6,7,-1
+      0,1,5,4,-1
+      2,3,7,6,-1
+      0,3,7,4,-1
+      1,2,6,5,-1
+    ]
+  }
+}
--- a/kicad/qeda.3dshapes/CONNECTOR_MOLEX_197054001.wrl
+++ b/kicad/qeda.3dshapes/CONNECTOR_MOLEX_197054001.wrl
@ -0,0 +1,35 @@
+#VRML V2.0 utf8
+Shape {
+  appearance Appearance {
+    material Material {
+    diffuseColor 0.37 0.37 0.37
+    emissiveColor 0.0 0.0 0.0
+    specularColor 1.0 1.0 1.0
+    ambientIntensity 1.0
+    transparency 0.5
+    shininess 1.0
+    }
+  }
+  geometry IndexedFaceSet {
+    coord Coordinate {
+      point [
+        -3.95 -1.5 0,
+        3.95 -1.5 0,
+        3.95 1.5 0,
+        -3.95 1.5 0,
+        -3.95 -1.5 14.22,
+        3.95 -1.5 14.22,
+        3.95 1.5 14.22,
+        -3.95 1.5 14.22
+      ]
+    }
+    coordIndex [
+      0,1,2,3,-1
+      4,5,6,7,-1
+      0,1,5,4,-1
+      2,3,7,6,-1
+      0,3,7,4,-1
+      1,2,6,5,-1
+    ]
+  }
+}
--- a/kicad/qeda.3dshapes/CONNECTOR_XT60.wrl
+++ b/kicad/qeda.3dshapes/CONNECTOR_XT60.wrl
@ -0,0 +1,35 @@
+#VRML V2.0 utf8
+Shape {
+  appearance Appearance {
+    material Material {
+    diffuseColor 0.37 0.37 0.37
+    emissiveColor 0.0 0.0 0.0
+    specularColor 1.0 1.0 1.0
+    ambientIntensity 1.0
+    transparency 0.5
+    shininess 1.0
+    }
+  }
+  geometry IndexedFaceSet {
+    coord Coordinate {
+      point [
+        -4.05 -7.75 0,
+        4.05 -7.75 0,
+        4.05 7.75 0,
+        -4.05 7.75 0,
+        -4.05 -7.75 15.7,
+        4.05 -7.75 15.7,
+        4.05 7.75 15.7,
+        -4.05 7.75 15.7
+      ]
+    }
+    coordIndex [
+      0,1,2,3,-1
+      4,5,6,7,-1
+      0,1,5,4,-1
+      2,3,7,6,-1
+      0,3,7,4,-1
+      1,2,6,5,-1
+    ]
+  }
+}
--- a/kicad/qeda.3dshapes/CONNECTOR_XT60PW.wrl
+++ b/kicad/qeda.3dshapes/CONNECTOR_XT60PW.wrl
@ -0,0 +1,35 @@
+#VRML V2.0 utf8
+Shape {
+  appearance Appearance {
+    material Material {
+    diffuseColor 0.37 0.37 0.37
+    emissiveColor 0.0 0.0 0.0
+    specularColor 1.0 1.0 1.0
+    ambientIntensity 1.0
+    transparency 0.5
+    shininess 1.0
+    }
+  }
+  geometry IndexedFaceSet {
+    coord Coordinate {
+      point [
+        -7.75 -8.6 0,
+        7.75 -8.6 0,
+        7.75 8.6 0,
+        -7.75 8.6 0,
+        -7.75 -8.6 8.4,
+        7.75 -8.6 8.4,
+        7.75 8.6 8.4,
+        -7.75 8.6 8.4
+      ]
+    }
+    coordIndex [
+      0,1,2,3,-1
+      4,5,6,7,-1
+      0,1,5,4,-1
+      2,3,7,6,-1
+      0,3,7,4,-1
+      1,2,6,5,-1
+    ]
+  }
+}
--- a/kicad/qeda.3dshapes/INDUCTOR_L4540.wrl
+++ b/kicad/qeda.3dshapes/INDUCTOR_L4540.wrl
@ -0,0 +1,35 @@
+#VRML V2.0 utf8
+Shape {
+  appearance Appearance {
+    material Material {
+    diffuseColor 0.37 0.37 0.37
+    emissiveColor 0.0 0.0 0.0
+    specularColor 1.0 1.0 1.0
+    ambientIntensity 1.0
+    transparency 0.5
+    shininess 1.0
+    }
+  }
+  geometry IndexedFaceSet {
+    coord Coordinate {
+      point [
+        -2 -2.25 0,
+        2 -2.25 0,
+        2 2.25 0,
+        -2 2.25 0,
+        -2 -2.25 3.2,
+        2 -2.25 3.2,
+        2 2.25 3.2,
+        -2 2.25 3.2
+      ]
+    }
+    coordIndex [
+      0,1,2,3,-1
+      4,5,6,7,-1
+      0,1,5,4,-1
+      2,3,7,6,-1
+      0,3,7,4,-1
+      1,2,6,5,-1
+    ]
+  }
+}
--- a/kicad/qeda.3dshapes/MCU_ESP32-C3-WROOM-02.wrl
+++ b/kicad/qeda.3dshapes/MCU_ESP32-C3-WROOM-02.wrl
@ -0,0 +1,35 @@
+#VRML V2.0 utf8
+Shape {
+  appearance Appearance {
+    material Material {
+    diffuseColor 0.37 0.37 0.37
+    emissiveColor 0.0 0.0 0.0
+    specularColor 1.0 1.0 1.0
+    ambientIntensity 1.0
+    transparency 0.5
+    shininess 1.0
+    }
+  }
+  geometry IndexedFaceSet {
+    coord Coordinate {
+      point [
+        -9 -10 0,
+        9 -10 0,
+        9 10 0,
+        -9 10 0,
+        -9 -10 3.2,
+        9 -10 3.2,
+        9 10 3.2,
+        -9 10 3.2
+      ]
+    }
+    coordIndex [
+      0,1,2,3,-1
+      4,5,6,7,-1
+      0,1,5,4,-1
+      2,3,7,6,-1
+      0,3,7,4,-1
+      1,2,6,5,-1
+    ]
+  }
+}
--- a/kicad/qeda.3dshapes/MECHANICAL_1TS002E.wrl
+++ b/kicad/qeda.3dshapes/MECHANICAL_1TS002E.wrl
@ -0,0 +1,35 @@
+#VRML V2.0 utf8
+Shape {
+  appearance Appearance {
+    material Material {
+    diffuseColor 0.37 0.37 0.37
+    emissiveColor 0.0 0.0 0.0
+    specularColor 1.0 1.0 1.0
+    ambientIntensity 1.0
+    transparency 0.5
+    shininess 1.0
+    }
+  }
+  geometry IndexedFaceSet {
+    coord Coordinate {
+      point [
+        -3.05 -1.85 0,
+        3.05 -1.85 0,
+        3.05 1.85 0,
+        -3.05 1.85 0,
+        -3.05 -1.85 2.5,
+        3.05 -1.85 2.5,
+        3.05 1.85 2.5,
+        -3.05 1.85 2.5
+      ]
+    }
+    coordIndex [
+      0,1,2,3,-1
+      4,5,6,7,-1
+      0,1,5,4,-1
+      2,3,7,6,-1
+      0,3,7,4,-1
+      1,2,6,5,-1
+    ]
+  }
+}
--- a/kicad/qeda.3dshapes/MECHANICAL_XKB_SK-3296S-01.wrl
+++ b/kicad/qeda.3dshapes/MECHANICAL_XKB_SK-3296S-01.wrl
@ -0,0 +1,35 @@
+#VRML V2.0 utf8
+Shape {
+  appearance Appearance {
+    material Material {
+    diffuseColor 0.37 0.37 0.37
+    emissiveColor 0.0 0.0 0.0
+    specularColor 1.0 1.0 1.0
+    ambientIntensity 1.0
+    transparency 0.5
+    shininess 1.0
+    }
+  }
+  geometry IndexedFaceSet {
+    coord Coordinate {
+      point [
+        -3.3 -2.85 0,
+        3.3 -2.85 0,
+        3.3 1.35 0,
+        -3.3 1.35 0,
+        -3.3 -2.85 1.4,
+        3.3 -2.85 1.4,
+        3.3 1.35 1.4,
+        -3.3 1.35 1.4
+      ]
+    }
+    coordIndex [
+      0,1,2,3,-1
+      4,5,6,7,-1
+      0,1,5,4,-1
+      2,3,7,6,-1
+      0,3,7,4,-1
+      1,2,6,5,-1
+    ]
+  }
+}
--- a/kicad/qeda.3dshapes/SOD2513X110N.wrl
+++ b/kicad/qeda.3dshapes/SOD2513X110N.wrl
@ -0,0 +1,35 @@
+#VRML V2.0 utf8
+Shape {
+  appearance Appearance {
+    material Material {
+    diffuseColor 0.37 0.37 0.37
+    emissiveColor 0.0 0.0 0.0
+    specularColor 1.0 1.0 1.0
+    ambientIntensity 1.0
+    transparency 0.5
+    shininess 1.0
+    }
+  }
+  geometry IndexedFaceSet {
+    coord Coordinate {
+      point [
+        -0.625 -0.8500000000000001 0,
+        0.625 -0.8500000000000001 0,
+        0.625 0.8500000000000001 0,
+        -0.625 0.8500000000000001 0,
+        -0.625 -0.8500000000000001 1.1,
+        0.625 -0.8500000000000001 1.1,
+        0.625 0.8500000000000001 1.1,
+        -0.625 0.8500000000000001 1.1
+      ]
+    }
+    coordIndex [
+      0,1,2,3,-1
+      4,5,6,7,-1
+      0,1,5,4,-1
+      2,3,7,6,-1
+      0,3,7,4,-1
+      1,2,6,5,-1
+    ]
+  }
+}
--- a/kicad/qeda.3dshapes/SOP127P600X175-8N.wrl
+++ b/kicad/qeda.3dshapes/SOP127P600X175-8N.wrl
@ -0,0 +1,35 @@
+#VRML V2.0 utf8
+Shape {
+  appearance Appearance {
+    material Material {
+    diffuseColor 0.37 0.37 0.37
+    emissiveColor 0.0 0.0 0.0
+    specularColor 1.0 1.0 1.0
+    ambientIntensity 1.0
+    transparency 0.5
+    shininess 1.0
+    }
+  }
+  geometry IndexedFaceSet {
+    coord Coordinate {
+      point [
+        -1.95 -2.45 0,
+        1.95 -2.45 0,
+        1.95 2.45 0,
+        -1.95 2.45 0,
+        -1.95 -2.45 1.75,
+        1.95 -2.45 1.75,
+        1.95 2.45 1.75,
+        -1.95 2.45 1.75
+      ]
+    }
+    coordIndex [
+      0,1,2,3,-1
+      4,5,6,7,-1
+      0,1,5,4,-1
+      2,3,7,6,-1
+      0,3,7,4,-1
+      1,2,6,5,-1
+    ]
+  }
+}
--- a/kicad/qeda.3dshapes/SOP254P1000X350-4N.wrl
+++ b/kicad/qeda.3dshapes/SOP254P1000X350-4N.wrl
@ -0,0 +1,35 @@
+#VRML V2.0 utf8
+Shape {
+  appearance Appearance {
+    material Material {
+    diffuseColor 0.37 0.37 0.37
+    emissiveColor 0.0 0.0 0.0
+    specularColor 1.0 1.0 1.0
+    ambientIntensity 1.0
+    transparency 0.5
+    shininess 1.0
+    }
+  }
+  geometry IndexedFaceSet {
+    coord Coordinate {
+      point [
+        -3.25 -2.29 0,
+        3.25 -2.29 0,
+        3.25 2.29 0,
+        -3.25 2.29 0,
+        -3.25 -2.29 3.5,
+        3.25 -2.29 3.5,
+        3.25 2.29 3.5,
+        -3.25 2.29 3.5
+      ]
+    }
+    coordIndex [
+      0,1,2,3,-1
+      4,5,6,7,-1
+      0,1,5,4,-1
+      2,3,7,6,-1
+      0,3,7,4,-1
+      1,2,6,5,-1
+    ]
+  }
+}
--- a/kicad/qeda.3dshapes/SOT95P280X130-3N.wrl
+++ b/kicad/qeda.3dshapes/SOT95P280X130-3N.wrl
@ -0,0 +1,35 @@
+#VRML V2.0 utf8
+Shape {
+  appearance Appearance {
+    material Material {
+    diffuseColor 0.37 0.37 0.37
+    emissiveColor 0.0 0.0 0.0
+    specularColor 1.0 1.0 1.0
+    ambientIntensity 1.0
+    transparency 0.5
+    shininess 1.0
+    }
+  }
+  geometry IndexedFaceSet {
+    coord Coordinate {
+      point [
+        -0.825 -1.4500000000000002 0,
+        0.825 -1.4500000000000002 0,
+        0.825 1.4500000000000002 0,
+        -0.825 1.4500000000000002 0,
+        -0.825 -1.4500000000000002 1.3,
+        0.825 -1.4500000000000002 1.3,
+        0.825 1.4500000000000002 1.3,
+        -0.825 1.4500000000000002 1.3
+      ]
+    }
+    coordIndex [
+      0,1,2,3,-1
+      4,5,6,7,-1
+      0,1,5,4,-1
+      2,3,7,6,-1
+      0,3,7,4,-1
+      1,2,6,5,-1
+    ]
+  }
+}
--- a/kicad/qeda.3dshapes/SOT95P280X80-6N.wrl
+++ b/kicad/qeda.3dshapes/SOT95P280X80-6N.wrl
@ -0,0 +1,35 @@
+#VRML V2.0 utf8
+Shape {
+  appearance Appearance {
+    material Material {
+    diffuseColor 0.37 0.37 0.37
+    emissiveColor 0.0 0.0 0.0
+    specularColor 1.0 1.0 1.0
+    ambientIntensity 1.0
+    transparency 0.5
+    shininess 1.0
+    }
+  }
+  geometry IndexedFaceSet {
+    coord Coordinate {
+      point [
+        -0.825 -1.46 0,
+        0.825 -1.46 0,
+        0.825 1.46 0,
+        -0.825 1.46 0,
+        -0.825 -1.46 0.8,
+        0.825 -1.46 0.8,
+        0.825 1.46 0.8,
+        -0.825 1.46 0.8
+      ]
+    }
+    coordIndex [
+      0,1,2,3,-1
+      4,5,6,7,-1
+      0,1,5,4,-1
+      2,3,7,6,-1
+      0,3,7,4,-1
+      1,2,6,5,-1
+    ]
+  }
+}
--- a/kicad/qeda.3dshapes/TP.wrl
+++ b/kicad/qeda.3dshapes/TP.wrl
@ -0,0 +1,35 @@
+#VRML V2.0 utf8
+Shape {
+  appearance Appearance {
+    material Material {
+    diffuseColor 0.37 0.37 0.37
+    emissiveColor 0.0 0.0 0.0
+    specularColor 1.0 1.0 1.0
+    ambientIntensity 1.0
+    transparency 0.5
+    shininess 1.0
+    }
+  }
+  geometry IndexedFaceSet {
+    coord Coordinate {
+      point [
+        0 0 0,
+        0 0 0,
+        0 0 0,
+        0 0 0,
+        0 0 0,
+        0 0 0,
+        0 0 0,
+        0 0 0
+      ]
+    }
+    coordIndex [
+      0,1,2,3,-1
+      4,5,6,7,-1
+      0,1,5,4,-1
+      2,3,7,6,-1
+      0,3,7,4,-1
+      1,2,6,5,-1
+    ]
+  }
+}
--- a/kicad/qeda.kicad_sym
+++ b/kicad/qeda.kicad_sym
--- a/kicad/qeda.pretty/CAPC1608X92N.kicad_mod
+++ b/kicad/qeda.pretty/CAPC1608X92N.kicad_mod
@ -30,7 +30,7 @@
  (fp_line (start 0.875 1.050) (end 0.875 -1.050) (layer F.CrtYd) (width 0.050))
  (fp_line (start 0.875 -1.050) (end 0.875 -1.550) (layer F.CrtYd) (width 0.050))
  (fp_line (start 0.875 -1.550) (end -0.875 -1.550) (layer F.CrtYd) (width 0.050))
-  (model CAPC1608X92N.wrl
+  (model ../qeda.3dshapes/CAPC1608X92N.wrl
    (at (xyz 0 0 0))
    (scale (xyz 0.3937 0.3937 0.3937))
    (rotate (xyz 0 0 0 ))
--- a/kicad/qeda.pretty/CAPC5750X220N.kicad_mod
+++ b/kicad/qeda.pretty/CAPC5750X220N.kicad_mod
@ -0,0 +1,38 @@
+(module CAPC5750X220N (layer F.Cu)
+  (attr smd)
+  (pad 1 smd rect (at 0.000 -2.900) (size 6.000 2.350) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 2 smd rect (at 0.000 2.900) (size 6.000 2.350) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (fp_text reference REF** (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.200 1.200) (thickness 0.200)))
+  )
+  (fp_line (start -3.300 -2.950) (end -3.300 2.950) (layer F.SilkS) (width 0.200))
+  (fp_line (start 3.300 -2.950) (end 3.300 2.950) (layer F.SilkS) (width 0.200))
+  (fp_circle (center 0.000 0.000) (end 0.000 0.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.700 0.000) (end 0.700 0.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.000 -0.700) (end 0.000 0.700) (layer F.Fab) (width 0.100))
+  (fp_text value CAPC5750X220N (at 0.000 0.000 90) (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_text user REF** (at 0.000 0.000 90) hide (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_line (start -2.500 -2.850) (end 2.500 -2.850) (layer F.Fab) (width 0.100))
+  (fp_line (start 2.500 -2.850) (end 2.500 2.850) (layer F.Fab) (width 0.100))
+  (fp_line (start 2.500 2.850) (end -2.500 2.850) (layer F.Fab) (width 0.100))
+  (fp_line (start -2.500 2.850) (end -2.500 -2.850) (layer F.Fab) (width 0.100))
+  (fp_line (start -3.250 -4.325) (end -3.250 -3.100) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -3.250 -3.100) (end -3.250 3.100) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -3.250 3.100) (end -3.250 4.325) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -3.250 4.325) (end 3.250 4.325) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 3.250 4.325) (end 3.250 3.100) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 3.250 3.100) (end 3.250 -3.100) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 3.250 -3.100) (end 3.250 -4.325) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 3.250 -4.325) (end -3.250 -4.325) (layer F.CrtYd) (width 0.050))
+  (model ../qeda.3dshapes/CAPC5750X220N.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.3937 0.3937 0.3937))
+    (rotate (xyz 0 0 0 ))
+  )
+)
--- a/kicad/qeda.pretty/CAPPRD200W45D500H700N.kicad_mod
+++ b/kicad/qeda.pretty/CAPPRD200W45D500H700N.kicad_mod
@ -0,0 +1,32 @@
+(module CAPPRD200W45D500H700N (layer F.Cu)
+  (pad 1 thru_hole rect (at 0.000 -1.000) (size 1.050 1.050) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill 0.650)
+    (solder_mask_margin 0.050))
+  (pad 2 thru_hole circle (at 0.000 1.000) (size 1.050 1.050) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill 0.650)
+    (solder_mask_margin 0.050))
+  (fp_text reference REF** (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.200 1.200) (thickness 0.200)))
+  )
+  (fp_circle (center 0.000 0.000) (end 0.000 2.600) (layer F.SilkS) (width 0.200))
+  (fp_line (start -0.825 -2.600) (end 0.825 -2.600) (layer F.SilkS) (width 0.200))
+  (fp_line (start 0.825 -2.600) (end 0.825 -0.175) (layer F.SilkS) (width 0.200))
+  (fp_line (start 0.825 -0.175) (end -0.825 -0.175) (layer F.SilkS) (width 0.200))
+  (fp_line (start -0.825 -0.175) (end -0.825 -2.600) (layer F.SilkS) (width 0.200))
+  (fp_circle (center 0.000 0.000) (end 0.000 0.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.700 0.000) (end 0.700 0.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.000 -0.700) (end 0.000 0.700) (layer F.Fab) (width 0.100))
+  (fp_text value CAPPRD200W45D500H700N (at 0.000 0.000 0) (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_text user REF** (at 0.000 0.000 0) hide (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_circle (center 0.000 0.000) (end 0.000 2.500) (layer F.Fab) (width 0.100))
+  (fp_circle (center 0.000 0.000) (end 0.000 2.750) (layer F.CrtYd) (width 0.050))
+  (model ../qeda.3dshapes/CAPPRD200W45D500H700N.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.3937 0.3937 0.3937))
+    (rotate (xyz 0 0 0 ))
+  )
+)
--- a/kicad/qeda.pretty/CONNECTOR_DC-005_2.0.kicad_mod
+++ b/kicad/qeda.pretty/CONNECTOR_DC-005_2.0.kicad_mod
@ -0,0 +1,42 @@
+(module CONNECTOR_DC-005_2.0 (layer F.Cu)
+  (pad 1 thru_hole oval (at -6.400 0.000) (size 1.300 4.000) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill oval 0.800 3.500)
+    (solder_mask_margin 0.050))
+  (pad 2 thru_hole oval (at -0.400 0.000) (size 1.300 4.000) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill oval 0.800 3.500)
+    (solder_mask_margin 0.050))
+  (pad 3 thru_hole oval (at -3.900 -4.800) (size 4.000 1.300) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill oval 3.500 0.800)
+    (solder_mask_margin 0.050))
+  (fp_text reference REF** (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.200 1.200) (thickness 0.200)))
+  )
+  (fp_line (start -7.200 -4.500) (end -6.200 -4.500) (layer F.SilkS) (width 0.200))
+  (fp_line (start -1.600 -4.500) (end 7.200 -4.500) (layer F.SilkS) (width 0.200))
+  (fp_line (start 7.200 -4.500) (end 7.200 4.500) (layer F.SilkS) (width 0.200))
+  (fp_line (start 7.200 4.500) (end -7.200 4.500) (layer F.SilkS) (width 0.200))
+  (fp_line (start -7.200 -4.500) (end -7.200 -2.300) (layer F.SilkS) (width 0.200))
+  (fp_line (start -7.200 2.300) (end -7.200 4.500) (layer F.SilkS) (width 0.200))
+  (fp_circle (center 0.000 0.000) (end 0.000 0.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.700 0.000) (end 0.700 0.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.000 -0.700) (end 0.000 0.700) (layer F.Fab) (width 0.100))
+  (fp_text value CONNECTOR_DC-005_2.0 (at 0.000 0.000 0) (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_text user REF** (at 0.000 0.000 0) hide (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_line (start -7.100 -4.400) (end 7.100 -4.400) (layer F.Fab) (width 0.100))
+  (fp_line (start 7.100 -4.400) (end 7.100 4.400) (layer F.Fab) (width 0.100))
+  (fp_line (start 7.100 4.400) (end -7.100 4.400) (layer F.Fab) (width 0.100))
+  (fp_line (start -7.100 4.400) (end -7.100 -4.400) (layer F.Fab) (width 0.100))
+  (fp_line (start -7.350 -5.700) (end 7.350 -5.700) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 7.350 -5.700) (end 7.350 4.650) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 7.350 4.650) (end -7.350 4.650) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -7.350 4.650) (end -7.350 -5.700) (layer F.CrtYd) (width 0.050))
+  (model ../qeda.3dshapes/CONNECTOR_DC-005_2.0.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.3937 0.3937 0.3937))
+    (rotate (xyz 0 0 0 ))
+  )
+)
--- a/kicad/qeda.pretty/CONNECTOR_HEADER-2.54-1X3.kicad_mod
+++ b/kicad/qeda.pretty/CONNECTOR_HEADER-2.54-1X3.kicad_mod
@ -0,0 +1,41 @@
+(module CONNECTOR_HEADER-2.54-1X3 (layer F.Cu)
+  (pad 1 thru_hole rect (at 0.000 -2.540) (size 1.500 1.500) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill 1.000)
+    (solder_mask_margin 0.050))
+  (pad 2 thru_hole circle (at 0.000 0.000) (size 1.500 1.500) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill 1.000)
+    (solder_mask_margin 0.050))
+  (pad 3 thru_hole circle (at 0.000 2.540) (size 1.500 1.500) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill 1.000)
+    (solder_mask_margin 0.050))
+  (fp_text reference REF** (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.200 1.200) (thickness 0.200)))
+  )
+  (fp_line (start -1.305 -3.910) (end 1.305 -3.910) (layer F.SilkS) (width 0.200))
+  (fp_line (start 1.305 -3.910) (end 1.305 3.910) (layer F.SilkS) (width 0.200))
+  (fp_line (start 1.305 3.910) (end -1.305 3.910) (layer F.SilkS) (width 0.200))
+  (fp_line (start -1.305 3.910) (end -1.305 -3.910) (layer F.SilkS) (width 0.200))
+  (fp_circle (center 0.000 0.000) (end 0.000 0.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.700 0.000) (end 0.700 0.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.000 -0.700) (end 0.000 0.700) (layer F.Fab) (width 0.100))
+  (fp_text value CONNECTOR_HEADER-2.54-1X3 (at 0.000 0.000 90) (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_text user REF** (at 0.000 0.000 90) hide (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_line (start -0.205 -3.810) (end 1.205 -3.810) (layer F.Fab) (width 0.100))
+  (fp_line (start 1.205 -3.810) (end 1.205 3.810) (layer F.Fab) (width 0.100))
+  (fp_line (start 1.205 3.810) (end -1.205 3.810) (layer F.Fab) (width 0.100))
+  (fp_line (start -1.205 3.810) (end -1.205 -2.810) (layer F.Fab) (width 0.100))
+  (fp_line (start -1.205 -2.810) (end -0.205 -3.810) (layer F.Fab) (width 0.100))
+  (fp_line (start -1.455 -4.060) (end 1.455 -4.060) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 1.455 -4.060) (end 1.455 4.060) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 1.455 4.060) (end -1.455 4.060) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -1.455 4.060) (end -1.455 -4.060) (layer F.CrtYd) (width 0.050))
+  (model ../qeda.3dshapes/CONNECTOR_HEADER-2.54-1X3.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.3937 0.3937 0.3937))
+    (rotate (xyz 0 0 0 ))
+  )
+)
--- a/kicad/qeda.pretty/CONNECTOR_HEADER-2.54-2X3.kicad_mod
+++ b/kicad/qeda.pretty/CONNECTOR_HEADER-2.54-2X3.kicad_mod
@ -0,0 +1,50 @@
+(module CONNECTOR_HEADER-2.54-2X3 (layer F.Cu)
+  (pad 1 thru_hole rect (at -1.270 -2.540) (size 1.500 1.500) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill 1.000)
+    (solder_mask_margin 0.050))
+  (pad 2 thru_hole circle (at 1.270 -2.540) (size 1.500 1.500) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill 1.000)
+    (solder_mask_margin 0.050))
+  (pad 3 thru_hole circle (at -1.270 0.000) (size 1.500 1.500) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill 1.000)
+    (solder_mask_margin 0.050))
+  (pad 4 thru_hole circle (at 1.270 0.000) (size 1.500 1.500) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill 1.000)
+    (solder_mask_margin 0.050))
+  (pad 5 thru_hole circle (at -1.270 2.540) (size 1.500 1.500) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill 1.000)
+    (solder_mask_margin 0.050))
+  (pad 6 thru_hole circle (at 1.270 2.540) (size 1.500 1.500) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill 1.000)
+    (solder_mask_margin 0.050))
+  (fp_text reference REF** (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.200 1.200) (thickness 0.200)))
+  )
+  (fp_line (start -2.515 -3.910) (end 2.515 -3.910) (layer F.SilkS) (width 0.200))
+  (fp_line (start 2.515 -3.910) (end 2.515 3.910) (layer F.SilkS) (width 0.200))
+  (fp_line (start 2.515 3.910) (end -2.515 3.910) (layer F.SilkS) (width 0.200))
+  (fp_line (start -2.515 3.910) (end -2.515 -3.910) (layer F.SilkS) (width 0.200))
+  (fp_circle (center 0.000 0.000) (end 0.000 0.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.700 0.000) (end 0.700 0.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.000 -0.700) (end 0.000 0.700) (layer F.Fab) (width 0.100))
+  (fp_text value CONNECTOR_HEADER-2.54-2X3 (at 0.000 0.000 90) (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_text user REF** (at 0.000 0.000 90) hide (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_line (start -1.415 -3.810) (end 2.415 -3.810) (layer F.Fab) (width 0.100))
+  (fp_line (start 2.415 -3.810) (end 2.415 3.810) (layer F.Fab) (width 0.100))
+  (fp_line (start 2.415 3.810) (end -2.415 3.810) (layer F.Fab) (width 0.100))
+  (fp_line (start -2.415 3.810) (end -2.415 -2.810) (layer F.Fab) (width 0.100))
+  (fp_line (start -2.415 -2.810) (end -1.415 -3.810) (layer F.Fab) (width 0.100))
+  (fp_line (start -2.665 -4.060) (end 2.665 -4.060) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 2.665 -4.060) (end 2.665 4.060) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 2.665 4.060) (end -2.665 4.060) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -2.665 4.060) (end -2.665 -4.060) (layer F.CrtYd) (width 0.050))
+  (model ../qeda.3dshapes/CONNECTOR_HEADER-2.54-2X3.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.3937 0.3937 0.3937))
+    (rotate (xyz 0 0 0 ))
+  )
+)
--- a/kicad/qeda.pretty/CONNECTOR_HRO_TYPE-C-31-M-12.kicad_mod
+++ b/kicad/qeda.pretty/CONNECTOR_HRO_TYPE-C-31-M-12.kicad_mod
@ -0,0 +1,82 @@
+(module CONNECTOR_HRO_TYPE-C-31-M-12 (layer F.Cu)
+  (pad 1 smd rect (at 3.400 4.305) (size 0.300 1.450) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.001))
+  (pad 2 smd rect (at 3.100 4.305) (size 0.300 1.450) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.001))
+  (pad 3 smd rect (at 2.600 4.305) (size 0.300 1.450) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.001))
+  (pad 4 smd rect (at 2.300 4.305) (size 0.300 1.450) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.001))
+  (pad 5 smd rect (at 1.750 4.305) (size 0.300 1.450) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.001))
+  (pad 6 smd rect (at 1.250 4.305) (size 0.300 1.450) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.001))
+  (pad 7 smd rect (at 0.750 4.305) (size 0.300 1.450) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.001))
+  (pad 8 smd rect (at 0.250 4.305) (size 0.300 1.450) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.001))
+  (pad 9 smd rect (at -0.250 4.305) (size 0.300 1.450) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.001))
+  (pad 10 smd rect (at -0.750 4.305) (size 0.300 1.450) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.001))
+  (pad 11 smd rect (at -1.250 4.305) (size 0.300 1.450) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.001))
+  (pad 12 smd rect (at -1.750 4.305) (size 0.300 1.450) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.001))
+  (pad 13 smd rect (at -2.300 4.305) (size 0.300 1.450) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.001))
+  (pad 14 smd rect (at -2.600 4.305) (size 0.300 1.450) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.001))
+  (pad 15 smd rect (at -3.100 4.305) (size 0.300 1.450) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.001))
+  (pad 16 smd rect (at -3.400 4.305) (size 0.300 1.450) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.001))
+  (pad 17 thru_hole oval (at -4.320 3.390) (size 1.000 2.100) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill oval 0.600 1.700)
+    (solder_mask_margin 0.035))
+  (pad 18 thru_hole oval (at 4.320 3.390) (size 1.000 2.100) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill oval 0.600 1.700)
+    (solder_mask_margin 0.035))
+  (pad 19 thru_hole oval (at -4.320 -0.780) (size 1.000 1.600) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill oval 0.600 1.200)
+    (solder_mask_margin 0.050))
+  (pad 20 thru_hole oval (at 4.320 -0.780) (size 1.000 1.600) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill oval 0.600 1.200)
+    (solder_mask_margin 0.050))
+  (pad MH1 np_thru_hole circle (at -2.890 2.860) (size 0.650 0.650) (layers F.Mask B.Mask)
+    (drill 0.650)
+    (solder_mask_margin 0.050))
+  (pad MH2 np_thru_hole circle (at 2.890 2.860) (size 0.650 0.650) (layers F.Mask B.Mask)
+    (drill 0.650)
+    (solder_mask_margin 0.050))
+  (fp_text reference REF** (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.200 1.200) (thickness 0.200)))
+  )
+  (fp_line (start -4.570 -3.750) (end 4.570 -3.750) (layer F.SilkS) (width 0.200))
+  (fp_line (start 4.570 -3.750) (end 4.570 -1.880) (layer F.SilkS) (width 0.200))
+  (fp_line (start 4.570 0.320) (end 4.570 2.040) (layer F.SilkS) (width 0.200))
+  (fp_line (start -4.570 -3.750) (end -4.570 -1.880) (layer F.SilkS) (width 0.200))
+  (fp_line (start -4.570 0.320) (end -4.570 2.040) (layer F.SilkS) (width 0.200))
+  (fp_circle (center 0.000 0.000) (end 0.000 0.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.700 0.000) (end 0.700 0.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.000 -0.700) (end 0.000 0.700) (layer F.Fab) (width 0.100))
+  (fp_text value CONNECTOR_HRO_TYPE-C-31-M-12 (at 0.000 0.000 0) (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_text user REF** (at 0.000 0.000 0) hide (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_line (start -4.470 -3.650) (end 4.470 -3.650) (layer F.Fab) (width 0.100))
+  (fp_line (start 4.470 -3.650) (end 4.470 3.650) (layer F.Fab) (width 0.100))
+  (fp_line (start 4.470 3.650) (end -4.470 3.650) (layer F.Fab) (width 0.100))
+  (fp_line (start -4.470 3.650) (end -4.470 -3.650) (layer F.Fab) (width 0.100))
+  (fp_line (start -5.070 -3.900) (end 5.070 -3.900) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 5.070 -3.900) (end 5.070 5.280) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 5.070 5.280) (end -5.070 5.280) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -5.070 5.280) (end -5.070 -3.900) (layer F.CrtYd) (width 0.050))
+  (model ../qeda.3dshapes/CONNECTOR_HRO_TYPE-C-31-M-12.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.3937 0.3937 0.3937))
+    (rotate (xyz 0 0 0 ))
+  )
+)
--- a/kicad/qeda.pretty/CONNECTOR_MOLEX_197054001.kicad_mod
+++ b/kicad/qeda.pretty/CONNECTOR_MOLEX_197054001.kicad_mod
@ -0,0 +1,35 @@
+(module CONNECTOR_MOLEX_197054001 (layer F.Cu)
+  (pad 1 thru_hole circle (at -2.540 0.000) (size 2.550 2.550) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill 1.700)
+    (solder_mask_margin 0.050))
+  (pad 2 thru_hole circle (at 2.540 0.000) (size 2.550 2.550) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill 1.700)
+    (solder_mask_margin 0.050))
+  (fp_text reference REF** (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.200 1.200) (thickness 0.200)))
+  )
+  (fp_line (start -4.050 -1.600) (end 4.050 -1.600) (layer F.SilkS) (width 0.200))
+  (fp_line (start 4.050 1.600) (end -4.050 1.600) (layer F.SilkS) (width 0.200))
+  (fp_circle (center 0.000 0.000) (end 0.000 0.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.700 0.000) (end 0.700 0.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.000 -0.700) (end 0.000 0.700) (layer F.Fab) (width 0.100))
+  (fp_text value CONNECTOR_MOLEX_197054001 (at 0.000 0.000 0) (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_text user REF** (at 0.000 0.000 0) hide (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_line (start -3.950 -1.500) (end 3.950 -1.500) (layer F.Fab) (width 0.100))
+  (fp_line (start 3.950 -1.500) (end 3.950 1.500) (layer F.Fab) (width 0.100))
+  (fp_line (start 3.950 1.500) (end -3.950 1.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -3.950 1.500) (end -3.950 -1.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -4.200 -1.750) (end 4.200 -1.750) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 4.200 -1.750) (end 4.200 1.750) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 4.200 1.750) (end -4.200 1.750) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -4.200 1.750) (end -4.200 -1.750) (layer F.CrtYd) (width 0.050))
+  (model ../qeda.3dshapes/CONNECTOR_MOLEX_197054001.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.3937 0.3937 0.3937))
+    (rotate (xyz 0 0 0 ))
+  )
+)
--- a/kicad/qeda.pretty/CONNECTOR_XT60.kicad_mod
+++ b/kicad/qeda.pretty/CONNECTOR_XT60.kicad_mod
@ -0,0 +1,40 @@
+(module CONNECTOR_XT60 (layer F.Cu)
+  (pad 1 thru_hole circle (at 0.000 -3.600) (size 6.000 6.000) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill 4.500)
+    (solder_mask_margin 0.050))
+  (pad 2 thru_hole circle (at 0.000 3.600) (size 6.000 6.000) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill 4.500)
+    (solder_mask_margin 0.050))
+  (fp_text reference REF** (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.200 1.200) (thickness 0.200)))
+  )
+  (fp_line (start -4.050 5.050) (end -1.350 7.750) (layer F.SilkS) (width 0.200))
+  (fp_line (start -1.350 7.750) (end 1.350 7.750) (layer F.SilkS) (width 0.200))
+  (fp_line (start 1.350 7.750) (end 4.050 5.050) (layer F.SilkS) (width 0.200))
+  (fp_line (start -4.150 -7.850) (end 4.150 -7.850) (layer F.SilkS) (width 0.200))
+  (fp_line (start 4.150 -7.850) (end 4.150 7.850) (layer F.SilkS) (width 0.200))
+  (fp_line (start 4.150 7.850) (end -4.150 7.850) (layer F.SilkS) (width 0.200))
+  (fp_line (start -4.150 7.850) (end -4.150 -7.850) (layer F.SilkS) (width 0.200))
+  (fp_circle (center 0.000 0.000) (end 0.000 0.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.700 0.000) (end 0.700 0.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.000 -0.700) (end 0.000 0.700) (layer F.Fab) (width 0.100))
+  (fp_text value CONNECTOR_XT60 (at 0.000 0.000 90) (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_text user REF** (at 0.000 0.000 90) hide (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_line (start -4.050 -7.750) (end 4.050 -7.750) (layer F.Fab) (width 0.100))
+  (fp_line (start 4.050 -7.750) (end 4.050 7.750) (layer F.Fab) (width 0.100))
+  (fp_line (start 4.050 7.750) (end -4.050 7.750) (layer F.Fab) (width 0.100))
+  (fp_line (start -4.050 7.750) (end -4.050 -7.750) (layer F.Fab) (width 0.100))
+  (fp_line (start -4.300 -8.000) (end 4.300 -8.000) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 4.300 -8.000) (end 4.300 8.000) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 4.300 8.000) (end -4.300 8.000) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -4.300 8.000) (end -4.300 -8.000) (layer F.CrtYd) (width 0.050))
+  (model ../qeda.3dshapes/CONNECTOR_XT60.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.3937 0.3937 0.3937))
+    (rotate (xyz 0 0 0 ))
+  )
+)
--- a/kicad/qeda.pretty/CONNECTOR_XT60PW.kicad_mod
+++ b/kicad/qeda.pretty/CONNECTOR_XT60PW.kicad_mod
@ -0,0 +1,45 @@
+(module CONNECTOR_XT60PW (layer F.Cu)
+  (pad 1 thru_hole circle (at -3.600 6.750) (size 4.050 4.050) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill 2.700)
+    (solder_mask_margin 0.050))
+  (pad 2 thru_hole circle (at 3.600 6.750) (size 4.050 4.050) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill 2.700)
+    (solder_mask_margin 0.050))
+  (pad NC1 thru_hole oval (at -6.750 0.750) (size 1.000 2.100) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill oval 0.600 1.700)
+    (solder_mask_margin 0.050))
+  (pad NC2 thru_hole oval (at 6.750 0.750) (size 1.000 2.100) (layers F.Cu F.Mask *.Cu B.Cu B.Mask)
+    (drill oval 0.600 1.700)
+    (solder_mask_margin 0.050))
+  (fp_text reference REF** (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.200 1.200) (thickness 0.200)))
+  )
+  (fp_line (start -7.850 -8.700) (end 7.850 -8.700) (layer F.SilkS) (width 0.200))
+  (fp_line (start 7.850 -8.700) (end 7.850 8.700) (layer F.SilkS) (width 0.200))
+  (fp_line (start -7.850 8.700) (end -5.925 8.700) (layer F.SilkS) (width 0.200))
+  (fp_line (start -1.275 8.700) (end 1.275 8.700) (layer F.SilkS) (width 0.200))
+  (fp_line (start 5.925 8.700) (end 7.850 8.700) (layer F.SilkS) (width 0.200))
+  (fp_line (start -7.850 8.700) (end -7.850 -8.700) (layer F.SilkS) (width 0.200))
+  (fp_circle (center 0.000 0.000) (end 0.000 0.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.700 0.000) (end 0.700 0.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.000 -0.700) (end 0.000 0.700) (layer F.Fab) (width 0.100))
+  (fp_text value CONNECTOR_XT60PW (at 0.000 0.000 90) (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_text user REF** (at 0.000 0.000 90) hide (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_line (start -7.750 -8.600) (end 7.750 -8.600) (layer F.Fab) (width 0.100))
+  (fp_line (start 7.750 -8.600) (end 7.750 8.600) (layer F.Fab) (width 0.100))
+  (fp_line (start 7.750 8.600) (end -7.750 8.600) (layer F.Fab) (width 0.100))
+  (fp_line (start -7.750 8.600) (end -7.750 -8.600) (layer F.Fab) (width 0.100))
+  (fp_line (start -8.000 -8.850) (end 8.000 -8.850) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 8.000 -8.850) (end 8.000 9.025) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 8.000 9.025) (end -8.000 9.025) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -8.000 9.025) (end -8.000 -8.850) (layer F.CrtYd) (width 0.050))
+  (model ../qeda.3dshapes/CONNECTOR_XT60PW.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.3937 0.3937 0.3937))
+    (rotate (xyz 0 0 0 ))
+  )
+)
--- a/kicad/qeda.pretty/INDUCTOR_L4540.kicad_mod
+++ b/kicad/qeda.pretty/INDUCTOR_L4540.kicad_mod
@ -0,0 +1,34 @@
+(module INDUCTOR_L4540 (layer F.Cu)
+  (attr smd)
+  (pad 1 smd rect (at 0.000 -1.650) (size 4.500 1.800) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 2 smd rect (at 0.000 1.650) (size 4.500 1.800) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (fp_text reference REF** (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.200 1.200) (thickness 0.200)))
+  )
+  (fp_line (start 2.100 -0.450) (end 2.100 0.450) (layer F.SilkS) (width 0.200))
+  (fp_line (start -2.100 -0.450) (end -2.100 0.450) (layer F.SilkS) (width 0.200))
+  (fp_circle (center 0.000 0.000) (end 0.000 0.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.700 0.000) (end 0.700 0.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.000 -0.700) (end 0.000 0.700) (layer F.Fab) (width 0.100))
+  (fp_text value INDUCTOR_L4540 (at 0.000 0.000 90) (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_text user REF** (at 0.000 0.000 90) hide (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_line (start -2.000 -2.250) (end 2.000 -2.250) (layer F.Fab) (width 0.100))
+  (fp_line (start 2.000 -2.250) (end 2.000 2.250) (layer F.Fab) (width 0.100))
+  (fp_line (start 2.000 2.250) (end -2.000 2.250) (layer F.Fab) (width 0.100))
+  (fp_line (start -2.000 2.250) (end -2.000 -2.250) (layer F.Fab) (width 0.100))
+  (fp_line (start -2.500 -2.800) (end 2.500 -2.800) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 2.500 -2.800) (end 2.500 2.800) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 2.500 2.800) (end -2.500 2.800) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -2.500 2.800) (end -2.500 -2.800) (layer F.CrtYd) (width 0.050))
+  (model ../qeda.3dshapes/INDUCTOR_L4540.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.3937 0.3937 0.3937))
+    (rotate (xyz 0 0 0 ))
+  )
+)
--- a/kicad/qeda.pretty/MCU_ESP32-C3-WROOM-02.kicad_mod
+++ b/kicad/qeda.pretty/MCU_ESP32-C3-WROOM-02.kicad_mod
@ -0,0 +1,89 @@
+(module MCU_ESP32-C3-WROOM-02 (layer F.Cu)
+  (attr smd)
+  (pad 1 smd rect (at -8.750 -2.900) (size 1.500 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 2 smd rect (at -8.750 -1.400) (size 1.500 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 3 smd rect (at -8.750 0.100) (size 1.500 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 4 smd rect (at -8.750 1.600) (size 1.500 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 5 smd rect (at -8.750 3.100) (size 1.500 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 6 smd rect (at -8.750 4.600) (size 1.500 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 7 smd rect (at -8.750 6.100) (size 1.500 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 8 smd rect (at -8.750 7.600) (size 1.500 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 9 smd rect (at -8.750 9.100) (size 1.500 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 10 smd rect (at 8.750 9.100) (size 1.500 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 11 smd rect (at 8.750 7.600) (size 1.500 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 12 smd rect (at 8.750 6.100) (size 1.500 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 13 smd rect (at 8.750 4.600) (size 1.500 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 14 smd rect (at 8.750 3.100) (size 1.500 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 15 smd rect (at 8.750 1.600) (size 1.500 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 16 smd rect (at 8.750 0.100) (size 1.500 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 17 smd rect (at 8.750 -1.400) (size 1.500 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 18 smd rect (at 8.750 -2.900) (size 1.500 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 19 smd rect (at -0.140 2.200) (size 0.700 0.700) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 20 smd rect (at 0.960 2.200) (size 0.700 0.700) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 21 smd rect (at 2.060 2.200) (size 0.700 0.700) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 22 smd rect (at -0.140 3.300) (size 0.700 0.700) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 23 smd rect (at 0.960 3.300) (size 0.700 0.700) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 24 smd rect (at 2.060 3.300) (size 0.700 0.700) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 25 smd rect (at -0.140 4.400) (size 0.700 0.700) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 26 smd rect (at 0.960 4.400) (size 0.700 0.700) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 27 smd rect (at 2.060 4.400) (size 0.700 0.700) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (fp_text reference REF** (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.200 1.200) (thickness 0.200)))
+  )
+  (fp_line (start -9.000 -4.000) (end 9.000 -4.000) (layer F.SilkS) (width 0.200))
+  (fp_line (start -9.100 -10.100) (end 9.100 -10.100) (layer F.SilkS) (width 0.200))
+  (fp_line (start 9.100 -10.100) (end 9.100 -3.650) (layer F.SilkS) (width 0.200))
+  (fp_line (start 9.100 9.850) (end 9.100 10.100) (layer F.SilkS) (width 0.200))
+  (fp_line (start 9.100 10.100) (end -9.100 10.100) (layer F.SilkS) (width 0.200))
+  (fp_line (start -9.100 -10.100) (end -9.100 -3.650) (layer F.SilkS) (width 0.200))
+  (fp_line (start -9.100 9.850) (end -9.100 10.100) (layer F.SilkS) (width 0.200))
+  (fp_circle (center 0.000 0.000) (end 0.000 0.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.700 0.000) (end 0.700 0.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.000 -0.700) (end 0.000 0.700) (layer F.Fab) (width 0.100))
+  (fp_text value MCU_ESP32-C3-WROOM-02 (at 0.000 0.000 90) (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_text user REF** (at 0.000 0.000 90) hide (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_line (start -9.000 -10.000) (end 9.000 -10.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 9.000 -10.000) (end 9.000 10.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 9.000 10.000) (end -9.000 10.000) (layer F.Fab) (width 0.100))
+  (fp_line (start -9.000 10.000) (end -9.000 -10.000) (layer F.Fab) (width 0.100))
+  (fp_line (start -9.750 -10.250) (end 9.750 -10.250) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 9.750 -10.250) (end 9.750 10.250) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 9.750 10.250) (end -9.750 10.250) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -9.750 10.250) (end -9.750 -10.250) (layer F.CrtYd) (width 0.050))
+  (model ../qeda.3dshapes/MCU_ESP32-C3-WROOM-02.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.3937 0.3937 0.3937))
+    (rotate (xyz 0 0 0 ))
+  )
+)
--- a/kicad/qeda.pretty/MECHANICAL_1TS002E.kicad_mod
+++ b/kicad/qeda.pretty/MECHANICAL_1TS002E.kicad_mod
@ -0,0 +1,38 @@
+(module MECHANICAL_1TS002E (layer F.Cu)
+  (attr smd)
+  (pad 1 smd rect (at -3.900 0.000) (size 1.500 1.500) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 2 smd rect (at 3.900 0.000) (size 1.500 1.500) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (fp_text reference REF** (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.200 1.200) (thickness 0.200)))
+  )
+  (fp_line (start -3.150 -1.950) (end 3.150 -1.950) (layer F.SilkS) (width 0.200))
+  (fp_line (start 3.150 -1.950) (end 3.150 -1.050) (layer F.SilkS) (width 0.200))
+  (fp_line (start 3.150 1.050) (end 3.150 1.950) (layer F.SilkS) (width 0.200))
+  (fp_line (start 3.150 1.950) (end -3.150 1.950) (layer F.SilkS) (width 0.200))
+  (fp_line (start -3.150 -1.950) (end -3.150 -1.050) (layer F.SilkS) (width 0.200))
+  (fp_line (start -3.150 1.050) (end -3.150 1.950) (layer F.SilkS) (width 0.200))
+  (fp_circle (center 0.000 0.000) (end 0.000 0.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.700 0.000) (end 0.700 0.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.000 -0.700) (end 0.000 0.700) (layer F.Fab) (width 0.100))
+  (fp_text value MECHANICAL_1TS002E (at 0.000 0.000 0) (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_text user REF** (at 0.000 0.000 0) hide (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_line (start -3.050 -1.850) (end 3.050 -1.850) (layer F.Fab) (width 0.100))
+  (fp_line (start 3.050 -1.850) (end 3.050 1.850) (layer F.Fab) (width 0.100))
+  (fp_line (start 3.050 1.850) (end -3.050 1.850) (layer F.Fab) (width 0.100))
+  (fp_line (start -3.050 1.850) (end -3.050 -1.850) (layer F.Fab) (width 0.100))
+  (fp_line (start -4.900 -2.100) (end 4.900 -2.100) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 4.900 -2.100) (end 4.900 2.100) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 4.900 2.100) (end -4.900 2.100) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -4.900 2.100) (end -4.900 -2.100) (layer F.CrtYd) (width 0.050))
+  (model ../qeda.3dshapes/MECHANICAL_1TS002E.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.3937 0.3937 0.3937))
+    (rotate (xyz 0 0 0 ))
+  )
+)
--- a/kicad/qeda.pretty/MECHANICAL_XKB_SK-3296S-01.kicad_mod
+++ b/kicad/qeda.pretty/MECHANICAL_XKB_SK-3296S-01.kicad_mod
@ -0,0 +1,54 @@
+(module MECHANICAL_XKB_SK-3296S-01 (layer F.Cu)
+  (pad 1 smd rect (at -2.250 2.850) (size 0.900 1.200) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 2 smd rect (at -0.750 2.850) (size 0.900 1.200) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 3 smd rect (at 2.250 2.850) (size 0.900 1.200) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad NC1 smd rect (at -3.800 -0.350) (size 0.800 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad NC2 smd rect (at -3.800 1.850) (size 0.800 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad NC3 smd rect (at 3.800 -0.350) (size 0.800 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad NC4 smd rect (at 3.800 1.850) (size 0.800 0.900) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad MH1 np_thru_hole circle (at -1.500 0.750) (size 0.900 0.900) (layers F.Mask B.Mask)
+    (drill 0.900)
+    (solder_mask_margin 0.050))
+  (pad MH2 np_thru_hole circle (at 1.500 0.750) (size 0.900 0.900) (layers F.Mask B.Mask)
+    (drill 0.900)
+    (solder_mask_margin 0.050))
+  (fp_text reference REF** (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.200 1.200) (thickness 0.200)))
+  )
+  (fp_line (start -3.300 -0.800) (end 3.300 -0.800) (layer F.SilkS) (width 0.200))
+  (fp_line (start -3.400 -2.200) (end 3.400 -2.200) (layer F.SilkS) (width 0.200))
+  (fp_line (start 3.400 -2.200) (end 3.400 -1.100) (layer F.SilkS) (width 0.200))
+  (fp_line (start 3.400 0.400) (end 3.400 1.100) (layer F.SilkS) (width 0.200))
+  (fp_line (start 0.000 2.200) (end 1.500 2.200) (layer F.SilkS) (width 0.200))
+  (fp_line (start -3.400 -2.200) (end -3.400 -1.100) (layer F.SilkS) (width 0.200))
+  (fp_line (start -3.400 0.400) (end -3.400 1.100) (layer F.SilkS) (width 0.200))
+  (fp_circle (center 0.000 0.000) (end 0.000 0.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.700 0.000) (end 0.700 0.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.000 -0.700) (end 0.000 0.700) (layer F.Fab) (width 0.100))
+  (fp_text value MECHANICAL_XKB_SK-3296S-01 (at 0.000 0.000 0) (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_text user REF** (at 0.000 0.000 0) hide (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_line (start -3.300 -2.100) (end 3.300 -2.100) (layer F.Fab) (width 0.100))
+  (fp_line (start 3.300 -2.100) (end 3.300 2.100) (layer F.Fab) (width 0.100))
+  (fp_line (start 3.300 2.100) (end -3.300 2.100) (layer F.Fab) (width 0.100))
+  (fp_line (start -3.300 2.100) (end -3.300 -2.100) (layer F.Fab) (width 0.100))
+  (fp_line (start -4.450 -2.350) (end 4.450 -2.350) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 4.450 -2.350) (end 4.450 3.700) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 4.450 3.700) (end -4.450 3.700) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -4.450 3.700) (end -4.450 -2.350) (layer F.CrtYd) (width 0.050))
+  (model ../qeda.3dshapes/MECHANICAL_XKB_SK-3296S-01.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.3937 0.3937 0.3937))
+    (rotate (xyz 0 0 0 ))
+  )
+)
--- a/kicad/qeda.pretty/SOD2513X110N.kicad_mod
+++ b/kicad/qeda.pretty/SOD2513X110N.kicad_mod
@ -0,0 +1,50 @@
+(module SOD2513X110N (layer F.Cu)
+  (attr smd)
+  (pad 1 smd rect (at 0.000 -1.100) (size 0.500 1.250) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 2 smd rect (at 0.000 1.100) (size 0.500 1.250) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (fp_text reference REF** (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.200 1.200) (thickness 0.200)))
+  )
+  (fp_line (start -0.725 -0.950) (end -0.725 0.950) (layer F.SilkS) (width 0.200))
+  (fp_line (start 0.725 -0.950) (end 0.725 0.950) (layer F.SilkS) (width 0.200))
+  (fp_line (start -0.550 -0.950) (end -0.725 -0.950) (layer F.SilkS) (width 0.200))
+  (fp_line (start -0.550 0.950) (end -0.725 0.950) (layer F.SilkS) (width 0.200))
+  (fp_line (start 0.550 -0.950) (end 0.725 -0.950) (layer F.SilkS) (width 0.200))
+  (fp_line (start 0.550 0.950) (end 0.725 0.950) (layer F.SilkS) (width 0.200))
+  (fp_line (start -0.550 -0.950) (end -0.550 -2.025) (layer F.SilkS) (width 0.200))
+  (fp_line (start -0.550 -2.025) (end 0.550 -2.025) (layer F.SilkS) (width 0.200))
+  (fp_line (start 0.550 -2.025) (end 0.550 -0.950) (layer F.SilkS) (width 0.200))
+  (fp_circle (center 0.000 0.000) (end 0.000 0.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.700 0.000) (end 0.700 0.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.000 -0.700) (end 0.000 0.700) (layer F.Fab) (width 0.100))
+  (fp_text value SOD2513X110N (at 0.000 0.000 90) (layer F.Fab)
+    (effects (font (size 0.825 0.825) (thickness 0.100)))
+  )
+  (fp_text user REF** (at 0.000 0.000 90) hide (layer F.Fab)
+    (effects (font (size 0.825 0.825) (thickness 0.100)))
+  )
+  (fp_line (start 0.000 -0.850) (end 0.625 -0.850) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.625 -0.850) (end 0.625 0.850) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.625 0.850) (end -0.625 0.850) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.625 0.850) (end -0.625 -0.225) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.625 -0.225) (end 0.000 -0.850) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.500 -1.975) (end -0.500 -1.100) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -0.500 -1.100) (end -0.875 -1.100) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -0.875 -1.100) (end -0.875 1.100) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -0.875 1.100) (end -0.500 1.100) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -0.500 1.100) (end -0.500 1.975) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -0.500 1.975) (end 0.500 1.975) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 0.500 1.975) (end 0.500 1.100) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 0.500 1.100) (end 0.875 1.100) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 0.875 1.100) (end 0.875 -1.100) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 0.875 -1.100) (end 0.500 -1.100) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 0.500 -1.100) (end 0.500 -1.975) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 0.500 -1.975) (end -0.500 -1.975) (layer F.CrtYd) (width 0.050))
+  (model ../qeda.3dshapes/SOD2513X110N.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.3937 0.3937 0.3937))
+    (rotate (xyz 0 0 0 ))
+  )
+)
--- a/kicad/qeda.pretty/SOP127P600X175-8N.kicad_mod
+++ b/kicad/qeda.pretty/SOP127P600X175-8N.kicad_mod
@ -0,0 +1,57 @@
+(module SOP127P600X175-8N (layer F.Cu)
+  (attr smd)
+  (pad 1 smd rect (at -2.700 -1.905) (size 1.575 0.600) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 2 smd rect (at -2.700 -0.635) (size 1.575 0.600) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 3 smd rect (at -2.700 0.635) (size 1.575 0.600) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 4 smd rect (at -2.700 1.905) (size 1.575 0.600) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 8 smd rect (at 2.700 -1.905) (size 1.575 0.600) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 7 smd rect (at 2.700 -0.635) (size 1.575 0.600) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 6 smd rect (at 2.700 0.635) (size 1.575 0.600) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 5 smd rect (at 2.700 1.905) (size 1.575 0.600) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (fp_text reference REF** (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.200 1.200) (thickness 0.200)))
+  )
+  (fp_line (start -2.050 -2.550) (end 2.050 -2.550) (layer F.SilkS) (width 0.200))
+  (fp_line (start 2.050 2.550) (end -2.050 2.550) (layer F.SilkS) (width 0.200))
+  (fp_line (start -2.050 -2.505) (end -3.788 -2.505) (layer F.SilkS) (width 0.200))
+  (fp_line (start -3.788 -2.505) (end -3.788 -1.605) (layer F.SilkS) (width 0.200))
+  (fp_circle (center 0.000 0.000) (end 0.000 0.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.700 0.000) (end 0.700 0.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.000 -0.700) (end 0.000 0.700) (layer F.Fab) (width 0.100))
+  (fp_text value SOP127P600X175-8N (at 0.000 0.000 90) (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_text user REF** (at 0.000 0.000 90) hide (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_line (start -0.950 -2.450) (end 1.950 -2.450) (layer F.Fab) (width 0.100))
+  (fp_line (start 1.950 -2.450) (end 1.950 2.450) (layer F.Fab) (width 0.100))
+  (fp_line (start 1.950 2.450) (end -1.950 2.450) (layer F.Fab) (width 0.100))
+  (fp_line (start -1.950 2.450) (end -1.950 -1.450) (layer F.Fab) (width 0.100))
+  (fp_line (start -1.950 -1.450) (end -0.950 -2.450) (layer F.Fab) (width 0.100))
+  (fp_line (start -3.738 -2.455) (end -2.200 -2.455) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -2.200 -2.455) (end -2.200 -2.700) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -2.200 -2.700) (end 2.200 -2.700) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 2.200 -2.700) (end 2.200 -2.455) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 2.200 -2.455) (end 3.738 -2.455) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 3.738 -2.455) (end 3.738 2.455) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 3.738 2.455) (end 2.200 2.455) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 2.200 2.455) (end 2.200 2.700) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 2.200 2.700) (end -2.200 2.700) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -2.200 2.700) (end -2.200 2.455) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -2.200 2.455) (end -3.738 2.455) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -3.738 2.455) (end -3.738 -2.455) (layer F.CrtYd) (width 0.050))
+  (model ../qeda.3dshapes/SOP127P600X175-8N.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.3937 0.3937 0.3937))
+    (rotate (xyz 0 0 0 ))
+  )
+)
--- a/kicad/qeda.pretty/SOP254P1000X350-4N.kicad_mod
+++ b/kicad/qeda.pretty/SOP254P1000X350-4N.kicad_mod
@ -0,0 +1,51 @@
+(module SOP254P1000X350-4N (layer F.Cu)
+  (attr smd)
+  (pad 1 smd rect (at -4.500 -1.270) (size 1.850 1.400) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 2 smd rect (at -4.500 1.270) (size 1.850 1.400) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 4 smd rect (at 4.500 -1.270) (size 1.850 1.400) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 3 smd rect (at 4.500 1.270) (size 1.850 1.400) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (fp_text reference REF** (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.200 1.200) (thickness 0.200)))
+  )
+  (fp_line (start -3.350 -2.390) (end 3.350 -2.390) (layer F.SilkS) (width 0.200))
+  (fp_line (start 3.350 -0.270) (end 3.350 0.270) (layer F.SilkS) (width 0.200))
+  (fp_line (start 3.350 2.390) (end -3.350 2.390) (layer F.SilkS) (width 0.200))
+  (fp_line (start -3.350 -0.270) (end -3.350 0.270) (layer F.SilkS) (width 0.200))
+  (fp_line (start -3.350 -2.270) (end -5.725 -2.270) (layer F.SilkS) (width 0.200))
+  (fp_line (start -5.725 -2.270) (end -5.725 -0.570) (layer F.SilkS) (width 0.200))
+  (fp_circle (center 0.000 0.000) (end 0.000 0.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.700 0.000) (end 0.700 0.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.000 -0.700) (end 0.000 0.700) (layer F.Fab) (width 0.100))
+  (fp_text value SOP254P1000X350-4N (at 0.000 0.000 0) (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_text user REF** (at 0.000 0.000 0) hide (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_line (start -2.250 -2.290) (end 3.250 -2.290) (layer F.Fab) (width 0.100))
+  (fp_line (start 3.250 -2.290) (end 3.250 2.290) (layer F.Fab) (width 0.100))
+  (fp_line (start 3.250 2.290) (end -3.250 2.290) (layer F.Fab) (width 0.100))
+  (fp_line (start -3.250 2.290) (end -3.250 -1.290) (layer F.Fab) (width 0.100))
+  (fp_line (start -3.250 -1.290) (end -2.250 -2.290) (layer F.Fab) (width 0.100))
+  (fp_line (start -5.675 -2.220) (end -3.500 -2.220) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -3.500 -2.220) (end -3.500 -2.540) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -3.500 -2.540) (end 3.500 -2.540) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 3.500 -2.540) (end 3.500 -2.220) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 3.500 -2.220) (end 5.675 -2.220) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 5.675 -2.220) (end 5.675 2.220) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 5.675 2.220) (end 3.500 2.220) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 3.500 2.220) (end 3.500 2.540) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 3.500 2.540) (end -3.500 2.540) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -3.500 2.540) (end -3.500 2.220) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -3.500 2.220) (end -5.675 2.220) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -5.675 2.220) (end -5.675 -2.220) (layer F.CrtYd) (width 0.050))
+  (model ../qeda.3dshapes/SOP254P1000X350-4N.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.3937 0.3937 0.3937))
+    (rotate (xyz 0 0 0 ))
+  )
+)
--- a/kicad/qeda.pretty/SOT95P280X130-3N.kicad_mod
+++ b/kicad/qeda.pretty/SOT95P280X130-3N.kicad_mod
@ -0,0 +1,50 @@
+(module SOT95P280X130-3N (layer F.Cu)
+  (attr smd)
+  (pad 1 smd rect (at -1.350 -0.950) (size 1.075 0.750) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 2 smd rect (at -1.350 0.950) (size 1.075 0.750) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 3 smd rect (at 1.350 0.000) (size 1.075 0.750) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (fp_text reference REF** (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.200 1.200) (thickness 0.200)))
+  )
+  (fp_line (start -0.925 -1.625) (end 0.925 -1.625) (layer F.SilkS) (width 0.200))
+  (fp_line (start 0.925 -1.625) (end 0.925 -0.675) (layer F.SilkS) (width 0.200))
+  (fp_line (start 0.925 0.675) (end 0.925 1.625) (layer F.SilkS) (width 0.200))
+  (fp_line (start 0.925 1.625) (end -0.925 1.625) (layer F.SilkS) (width 0.200))
+  (fp_line (start -0.925 -0.275) (end -0.925 0.275) (layer F.SilkS) (width 0.200))
+  (fp_line (start -0.925 -1.625) (end -2.188 -1.625) (layer F.SilkS) (width 0.200))
+  (fp_line (start -2.188 -1.625) (end -2.188 -0.575) (layer F.SilkS) (width 0.200))
+  (fp_circle (center 0.000 0.000) (end 0.000 0.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.700 0.000) (end 0.700 0.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.000 -0.700) (end 0.000 0.700) (layer F.Fab) (width 0.100))
+  (fp_text value SOT95P280X130-3N (at 0.000 0.000 90) (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_text user REF** (at 0.000 0.000 90) hide (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_line (start 0.000 -1.450) (end 0.825 -1.450) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.825 -1.450) (end 0.825 1.450) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.825 1.450) (end -0.825 1.450) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.825 1.450) (end -0.825 -0.625) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.825 -0.625) (end 0.000 -1.450) (layer F.Fab) (width 0.100))
+  (fp_line (start -2.138 -1.575) (end -1.075 -1.575) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -1.075 -1.575) (end -1.075 -1.700) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -1.075 -1.700) (end 1.075 -1.700) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 1.075 -1.700) (end 1.075 -0.625) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 1.075 -0.625) (end 2.138 -0.625) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 2.138 -0.625) (end 2.138 0.625) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 2.138 0.625) (end 1.075 0.625) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 1.075 0.625) (end 1.075 1.700) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 1.075 1.700) (end -1.075 1.700) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -1.075 1.700) (end -1.075 1.575) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -1.075 1.575) (end -2.138 1.575) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -2.138 1.575) (end -2.138 -1.575) (layer F.CrtYd) (width 0.050))
+  (model ../qeda.3dshapes/SOT95P280X130-3N.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.3937 0.3937 0.3937))
+    (rotate (xyz 0 0 0 ))
+  )
+)
--- a/kicad/qeda.pretty/SOT95P280X80-6N.kicad_mod
+++ b/kicad/qeda.pretty/SOT95P280X80-6N.kicad_mod
@ -0,0 +1,53 @@
+(module SOT95P280X80-6N (layer F.Cu)
+  (attr smd)
+  (pad 1 smd rect (at -1.350 -0.950) (size 1.075 0.600) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 2 smd rect (at -1.350 0.000) (size 1.075 0.600) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 3 smd rect (at -1.350 0.950) (size 1.075 0.600) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 6 smd rect (at 1.350 -0.950) (size 1.075 0.600) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 5 smd rect (at 1.350 0.000) (size 1.075 0.600) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (pad 4 smd rect (at 1.350 0.950) (size 1.075 0.600) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.050))
+  (fp_text reference REF** (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.200 1.200) (thickness 0.200)))
+  )
+  (fp_line (start -0.925 -1.560) (end 0.925 -1.560) (layer F.SilkS) (width 0.200))
+  (fp_line (start 0.925 1.560) (end -0.925 1.560) (layer F.SilkS) (width 0.200))
+  (fp_line (start -0.925 -1.550) (end -2.188 -1.550) (layer F.SilkS) (width 0.200))
+  (fp_line (start -2.188 -1.550) (end -2.188 -0.650) (layer F.SilkS) (width 0.200))
+  (fp_circle (center 0.000 0.000) (end 0.000 0.500) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.700 0.000) (end 0.700 0.000) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.000 -0.700) (end 0.000 0.700) (layer F.Fab) (width 0.100))
+  (fp_text value SOT95P280X80-6N (at 0.000 0.000 90) (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_text user REF** (at 0.000 0.000 90) hide (layer F.Fab)
+    (effects (font (size 1.000 1.000) (thickness 0.100)))
+  )
+  (fp_line (start 0.000 -1.460) (end 0.825 -1.460) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.825 -1.460) (end 0.825 1.460) (layer F.Fab) (width 0.100))
+  (fp_line (start 0.825 1.460) (end -0.825 1.460) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.825 1.460) (end -0.825 -0.635) (layer F.Fab) (width 0.100))
+  (fp_line (start -0.825 -0.635) (end 0.000 -1.460) (layer F.Fab) (width 0.100))
+  (fp_line (start -2.138 -1.500) (end -1.075 -1.500) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -1.075 -1.500) (end -1.075 -1.710) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -1.075 -1.710) (end 1.075 -1.710) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 1.075 -1.710) (end 1.075 -1.500) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 1.075 -1.500) (end 2.138 -1.500) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 2.138 -1.500) (end 2.138 1.500) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 2.138 1.500) (end 1.075 1.500) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 1.075 1.500) (end 1.075 1.710) (layer F.CrtYd) (width 0.050))
+  (fp_line (start 1.075 1.710) (end -1.075 1.710) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -1.075 1.710) (end -1.075 1.500) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -1.075 1.500) (end -2.138 1.500) (layer F.CrtYd) (width 0.050))
+  (fp_line (start -2.138 1.500) (end -2.138 -1.500) (layer F.CrtYd) (width 0.050))
+  (model ../qeda.3dshapes/SOT95P280X80-6N.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.3937 0.3937 0.3937))
+    (rotate (xyz 0 0 0 ))
+  )
+)
--- a/kicad/qeda.pretty/TP.kicad_mod
+++ b/kicad/qeda.pretty/TP.kicad_mod
@ -0,0 +1,17 @@
+(module TP (layer F.Cu)
+  (attr smd)
+  (pad 1 smd circle (at 0.000 0.000) (size 1.000 1.000) (layers F.Cu F.Mask F.Paste)
+    (solder_mask_margin 0.200))
+  (fp_text reference REF** (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.200 1.200) (thickness 0.200)))
+  )
+  (fp_text value TP (at 0.000 0.000) (layer F.SilkS)
+    (effects (font (size 1.000 1.000) (thickness 0.200)))
+  )
+  (fp_circle (center 0.000 0.000) (end 0.000 0.800) (layer F.SilkS) (width 0.200))
+  (model ../qeda.3dshapes/TP.wrl
+    (at (xyz 0 0 0))
+    (scale (xyz 0.3937 0.3937 0.3937))
+    (rotate (xyz 0 0 0 ))
+  )
+)
--- a/kicad/qeda.pretty/UC1608X55N.kicad_mod
+++ b/kicad/qeda.pretty/UC1608X55N.kicad_mod
@ -30,7 +30,7 @@
  (fp_line (start 0.730 0.980) (end 0.730 -0.980) (layer F.CrtYd) (width 0.050))
  (fp_line (start 0.730 -0.980) (end 0.730 -1.255) (layer F.CrtYd) (width 0.050))
  (fp_line (start 0.730 -1.255) (end -0.730 -1.255) (layer F.CrtYd) (width 0.050))
-  (model UC1608X55N.wrl
+  (model ../qeda.3dshapes/UC1608X55N.wrl
    (at (xyz 0 0 0))
    (scale (xyz 0.3937 0.3937 0.3937))
    (rotate (xyz 0 0 0 ))
--- a/kicad/qeda.pretty/UPC2012X80N.kicad_mod
+++ b/kicad/qeda.pretty/UPC2012X80N.kicad_mod
@ -34,7 +34,7 @@
  (fp_line (start 1.050 1.250) (end 1.050 -1.250) (layer F.CrtYd) (width 0.050))
  (fp_line (start 1.050 -1.250) (end 1.050 -1.700) (layer F.CrtYd) (width 0.050))
  (fp_line (start 1.050 -1.700) (end -1.050 -1.700) (layer F.CrtYd) (width 0.050))
-  (model UPC2012X80N.wrl
+  (model ../qeda.3dshapes/UPC2012X80N.wrl
    (at (xyz 0 0 0))
    (scale (xyz 0.3937 0.3937 0.3937))
    (rotate (xyz 0 0 0 ))
--- a/2
+++ b/2
@ -1 +1 @@
-Subproject commit 3f3f15e7c3aacf85d86bfeb31cfcd14abf2f66e1
+Subproject commit 9a7aea49d383b3ac21bde1b6c967d2e297400593
--- a/refdes2fab.py
+++ b/refdes2fab.py
@ -0,0 +1,9 @@
+import pcbnew
+import sys
+
+board = pcbnew.LoadBoard(sys.argv[1])
+for fp in board.GetFootprints():
+  fp.Value().SetVisible(False)
+  fp.Reference().SetLayer(board.GetLayerID('F.Fab'))
+
+board.Save(sys.argv[1])
--- a/template.kicad_pcb
+++ b/template.kicad_pcb
@ -1,113 +0,0 @@
-(kicad_pcb
-	(version 20240108)
-	(generator "pcbnew")
-	(generator_version "8.0")
-	(general
-		(thickness 1.6)
-		(legacy_teardrops no)
-	)
-	(paper "A4")
-	(title_block
-		(date "$date$")
-		(rev "$version$.$revision$")
-		(company "CuVoodoo")
-		(comment 1 "King Kévin")
-		(comment 2 "CERN-OHL-S")
-	)
-	(layers
-		(0 "F.Cu" signal)
-		(31 "B.Cu" signal)
-		(33 "F.Adhes" user "F.Adhesive")
-		(36 "B.SilkS" user "B.Silkscreen")
-		(37 "F.SilkS" user "F.Silkscreen")
-		(38 "B.Mask" user)
-		(39 "F.Mask" user)
-		(44 "Edge.Cuts" user)
-		(45 "Margin" user)
-		(46 "B.CrtYd" user "B.Courtyard")
-		(47 "F.CrtYd" user "F.Courtyard")
-		(48 "B.Fab" user)
-		(49 "F.Fab" user)
-	)
-	(setup
-		(stackup
-			(layer "F.SilkS"
-				(type "Top Silk Screen")
-				(color "White")
-			)
-			(layer "F.Mask"
-				(type "Top Solder Mask")
-				(color "Green")
-				(thickness 0.01)
-			)
-			(layer "F.Cu"
-				(type "copper")
-				(thickness 0.035)
-			)
-			(layer "dielectric 1"
-				(type "core")
-				(color "Polyimide")
-				(thickness 1.51)
-				(material "FR4")
-				(epsilon_r 4.5)
-				(loss_tangent 0.02)
-			)
-			(layer "B.Cu"
-				(type "copper")
-				(thickness 0.035)
-			)
-			(layer "B.Mask"
-				(type "Bottom Solder Mask")
-				(color "Green")
-				(thickness 0.01)
-			)
-			(layer "B.SilkS"
-				(type "Bottom Silk Screen")
-				(color "White")
-			)
-			(copper_finish "HAL SnPb")
-			(dielectric_constraints no)
-		)
-		(pad_to_mask_clearance 0.038)
-		(solder_mask_min_width 0.1)
-		(allow_soldermask_bridges_in_footprints no)
-		(pcbplotparams
-			(layerselection 0x00010fc_ffffffff)
-			(plot_on_all_layers_selection 0x0000000_00000000)
-			(disableapertmacros no)
-			(usegerberextensions no)
-			(usegerberattributes yes)
-			(usegerberadvancedattributes yes)
-			(creategerberjobfile yes)
-			(dashed_line_dash_ratio 12.000000)
-			(dashed_line_gap_ratio 3.000000)
-			(svgprecision 6)
-			(plotframeref no)
-			(viasonmask no)
-			(mode 1)
-			(useauxorigin no)
-			(hpglpennumber 1)
-			(hpglpenspeed 20)
-			(hpglpendiameter 15.000000)
-			(pdf_front_fp_property_popups yes)
-			(pdf_back_fp_property_popups yes)
-			(dxfpolygonmode yes)
-			(dxfimperialunits yes)
-			(dxfusepcbnewfont yes)
-			(psnegative no)
-			(psa4output no)
-			(plotreference yes)
-			(plotvalue yes)
-			(plotfptext yes)
-			(plotinvisibletext no)
-			(sketchpadsonfab no)
-			(subtractmaskfromsilk no)
-			(outputformat 1)
-			(mirror no)
-			(drillshape 1)
-			(scaleselection 1)
-			(outputdirectory "")
-		)
-	)
-	(net 0 "")
-)
--- a/template.kicad_sch
+++ b/template.kicad_sch
@ -1,20 +0,0 @@
-(kicad_sch
-	(version 20231120)
-	(generator "eeschema")
-	(generator_version "8.0")
-	(uuid "43fc3289-82a7-492c-a423-3030e10115dc")
-	(paper "A4")
-	(title_block
-		(date "$date$")
-		(rev "$version$.$revision$")
-		(company "CuVoodoo")
-		(comment 1 "King Kévin")
-		(comment 2 "CERN-OHL-S")
-	)
-	(lib_symbols)
-	(sheet_instances
-		(path "/"
-			(page "1")
-		)
-	)
-)
--- a/2
+++ b/2
@ -1 +1 @@
-0
+1
Author	SHA1	Message	Date
King Kévin	da13b2ae51	lib: update repo	2023-06-27 20:22:32 +02:00
King Kévin	4f8f88a753	brd: update part values for ibom	2023-06-27 20:17:57 +02:00
King Kévin	5b1cff2b97	sch: set schottky name	2023-06-27 20:17:23 +02:00
King Kévin	77009cfeb2	brd: fix silk	2023-06-23 17:12:56 +02:00
King Kévin	0221009b56	sch: fix some comments	2023-06-23 17:05:12 +02:00
King Kévin	733ed00ceb	sch: fix LED color	2023-06-23 17:01:24 +02:00
King Kévin	030c541a6a	sch: fix comments	2023-06-12 10:26:34 +02:00
King Kévin	9195b8d86d	doc: update to v1 changes	2023-06-12 10:01:57 +02:00
King Kévin	55252ba911	brd: add serial in silk	2023-06-11 20:29:58 +02:00
King Kévin	35e64405c1	brd: fix outline	2023-06-11 20:23:12 +02:00
King Kévin	dd742e42b6	brd: add logos	2023-06-11 20:06:47 +02:00
King Kévin	6a3f239c46	brd: reduce to 2-layer	2023-06-11 19:41:08 +02:00
King Kévin	99e48ea182	sch/brd: complete routing for v1 with MCU	2023-06-11 19:22:54 +02:00
King Kévin	537dbd6505	lib: add parts for MCU	2023-06-11 19:22:10 +02:00
King Kévin	92b8e6d7c1	switch to version 1	2023-06-11 19:21:28 +02:00
King Kévin	d5afaa84a0	doc: add purpose and limitation	2023-06-11 19:20:30 +02:00
King Kévin	fc6e3cd125	doc: document project	2023-05-29 11:44:23 +02:00
King Kévin	85b8622c43	brd/sch: add version info	2023-05-29 10:49:34 +02:00
King Kévin	a91a31e70c	make: ignore DRC for export	2023-05-29 10:47:45 +02:00
King Kévin	07eaeec1fa	brd/sch: add power switch	2023-05-28 22:02:52 +02:00
King Kévin	a3e6fb3d36	brd/sch: remove unused tab, add LED, add bat vias	2023-05-28 21:40:06 +02:00
King Kévin	295bf44a8c	lib: add test point	2023-05-28 21:39:10 +02:00
King Kévin	0cf7757fe4	brd/sch: complete first layout	2023-05-28 18:45:13 +02:00
King Kévin	2904a867e1	lib: add used parts	2023-05-28 18:44:39 +02:00
King Kévin	ce1bc9ce36	name project	2023-05-28 12:37:17 +02:00