doc: improve power limit
This commit is contained in:
parent
0bbf6e2400
commit
6302a95e55
10
README.md
10
README.md
|
@ -31,7 +31,15 @@ power
|
|||
|
||||
The built-in 5V DC-DC converter is only rated up to 5A, limiting the total maximum output to 25W.
|
||||
This means you can power up to 5 m of WS2812b 30 LEDs/m strip at full brightness.
|
||||
For more, limit the brightness in WLED, or use multiple boards and chain them.
|
||||
For more LEDs, limit the brightness in WLED, or use multiple boards and chain them.
|
||||
|
||||
The spring loaded terminals are only rated for 2A, with a maximum wire size of AWG 20.
|
||||
If you intend to draw more current, you can add a connection to another 5V output from the LEDs or power port.
|
||||
This is particularly relevant for re-injecting power, which you should do minimum every 5 meters.
|
||||
If you need even more current, or use thicker cables, just solder the cable directly to the pins on the bottom or on the rear tab of the barrel jack connector.
|
||||
If you need more than 5A, you are exceeding the use case of this board.
|
||||
Switch back to using a external power supply and connect the LED strips directly to it.
|
||||
You can even power the board with the same 5V or 8-36V power supply using the power port.
|
||||
|
||||
features
|
||||
--------
|
||||
|
|
Loading…
Reference in New Issue