From 2efd234f3b633c74e81bde125f3e13d382127c92 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?King=20K=C3=A9vin?= <kingkevin@cuvoodoo.info>
Date: Tue, 17 Dec 2019 00:46:33 +0100
Subject: [PATCH] schematic: fix notes

---
 hardware/usb_cable_tester.sch | 33 +++++++++++++++++----------------
 1 file changed, 17 insertions(+), 16 deletions(-)

diff --git a/hardware/usb_cable_tester.sch b/hardware/usb_cable_tester.sch
index 4cb557a..ba46c2f 100644
--- a/hardware/usb_cable_tester.sch
+++ b/hardware/usb_cable_tester.sch
@@ -102,7 +102,7 @@ device=BATTERY
 T 15000 21000 5 10 0 0 270 0 1
 symversion=0.1
 T 13900 21000 5 10 0 1 0 0 1
-note=18650 LiPo batteries are large, but they are ubiquitous and external chargers are cheap. but most importantly because thae provide 3.6-4.2V only a LDO is needed to get 3.3V
+note=18650 LiPo batteries are large, but they are ubiquitous and external chargers are cheap. but most importantly because they provide 3.6-4.2V only a LDO is needed to get 3.3V
 T 13700 21300 5 10 0 0 0 0 1
 footprint=custom_18650_HOLDER.lht
 T 14200 21100 5 10 1 1 0 0 1
@@ -117,7 +117,7 @@ device=BATTERY
 T 13600 21000 5 10 0 0 270 0 1
 symversion=0.1
 T 12500 21000 5 10 0 1 0 0 1
-note=connector to external Li-Ion battery, generaly smaller and flatter
+note=connector to external Li-Ion battery, generaly smaller and flatter than 18650 batteries
 T 12700 20900 5 10 0 1 0 0 1
 footprint=custom_XH-2.54-2P.lht
 T 12800 21100 5 10 1 1 0 0 1
@@ -216,9 +216,7 @@ C 4200 800 1 0 0 STM32F103xC.sym
 T 4200 800 5 8 0 0 0 0 1
 footprint=QFP50P2200X2200X160-144M.lht
 T 4200 800 5 10 0 0 0 0 1
-note=when BOOT0 is low on power up, the main flash memory is selected as boot space (BOOT1 is ignored and free to use as GPIO PB2)
-T 4200 800 5 10 0 0 0 0 1
-note=has internal pull-up on NRST, SWDIO; has internal pull-down on SWCLK
+note=when BOOT0 is low on power up, the main flash memory is selected as boot space (BOOT1 is ignored and free to use as GPIO PB2). has internal pull-up on NRST, SWDIO; has internal pull-down on SWCLK
 T 4500 14910 5 10 1 1 0 0 1
 refdes=U2
 T 7660 1140 5 10 1 1 0 2 1
@@ -1689,10 +1687,12 @@ T 17300 17300 5 8 0 0 0 0 1
 footprint=custom_I2C_LCD_ADAPTER.lht
 T 17300 17300 5 10 0 0 0 0 1
 note=has on-board 4k7 pull-up resistors on I²C lines
-T 17800 21160 5 10 1 1 0 3 1
+T 17800 21210 5 10 1 1 0 3 1
 refdes=U6
 T 19100 17460 5 10 1 1 180 5 1
 device=I2C_LCD_ADAPTER
+T 18300 21200 5 10 1 1 0 0 1
+value=I2C_LCD_BACKPACK
 }
 N 19400 20900 20200 20900 4
 N 20200 20900 20200 22800 4
@@ -1754,9 +1754,9 @@ C 29600 18600 1 0 0 generic-power.sym
 T 29800 18850 5 10 1 1 0 3 1
 net=VDISPLAY:1
 }
-C 18000 21500 1 0 0 generic-power.sym
+C 18000 21900 1 0 0 generic-power.sym
 {
-T 18200 21750 5 10 1 1 0 3 1
+T 18200 22150 5 10 1 1 0 3 1
 net=VDISPLAY:1
 }
 C 29600 16500 1 0 0 ground.sym
@@ -1776,21 +1776,21 @@ value=1uF
 }
 N 29800 18600 30300 18600 4
 C 31000 18300 1 0 0 ground.sym
-C 19600 21300 1 0 1 capacitor-1.sym
+C 19600 21700 1 0 1 capacitor-1.sym
 {
-T 19400 22000 5 10 0 0 180 2 1
+T 19400 22400 5 10 0 0 180 2 1
 device=CAPACITOR
-T 19400 22200 5 10 0 0 180 2 1
+T 19400 22600 5 10 0 0 180 2 1
 symversion=0.1
-T 19600 21300 5 10 0 1 0 0 1
+T 19600 21700 5 10 0 1 0 0 1
 footprint=CAPC1608X92M.lht
-T 18800 21700 5 10 1 1 0 0 1
+T 18800 22100 5 10 1 1 0 0 1
 refdes=C8
-T 19300 21700 5 10 1 1 0 0 1
+T 19300 22100 5 10 1 1 0 0 1
 value=1uF
 }
-N 18200 21500 18700 21500 4
-C 19400 21200 1 0 0 ground.sym
+N 18200 21900 18700 21900 4
+C 19400 21600 1 0 0 ground.sym
 C 26700 17700 1 0 0 input-2.sym
 {
 T 26700 17900 5 10 0 0 0 0 1
@@ -3289,3 +3289,4 @@ device=none
 T 16400 19200 5 10 1 1 0 7 1
 value=I2C_SCL
 }
+N 18200 21900 18200 21500 4