stm32f1/application.ld

31 lines
1.5 KiB
Plaintext

/* linker script for application running on STM32F103x8 micro-controller
* the STM32F103x8 has 64 KB of flash starting at 0x0800 0000, and 20 KB of RAM starting at 0x2000 0000
* the STM32F103xB has 128 KB of flash starting at 0x0800 0000, and 20 KB of RAM starting at 0x2000 0000
* STM32F103x8 most often have if fact 128 KB, instead of the specified and advertised 64 KB, like the STM32F103xB
* you can define the desired flash size here.
* the USB DFU bootloader will take the first 8 KB of flash, followed by the application
* the first 4 bytes of the RAM is reserved for the DFU magic word (DFU! to start DFU bootloader)
*/
/* define memory regions. */
MEMORY
{
rom (rx) : ORIGIN = 0x08000000 + 8K, LENGTH = 64K - 8K
ram (rwx) : ORIGIN = 0x20000000 + 4, LENGTH = 20K - 4
}
PROVIDE(__application_beginning = ORIGIN(rom));
/* if you want the firmware to use the flash size advertised by the micro-controller itself, use the following:
PROVIDE(__application_end = 0);
PROVIDE(__flash_end = 0);
if you want to enforce a flash size, because there is more flash than advertized by the micro-controller, use to following:
PROVIDE(__application_end = ORIGIN(rom) + LENGTH(rom));
PROVIDE(__flash_end = ORIGIN(rom) + LENGTH(rom));
*/
PROVIDE(__application_end = 0);
PROVIDE(__flash_end = 0);
/* RAM location reserved so application can talk to bootloader and tell to start DFU */
PROVIDE(__dfu_magic = ORIGIN(ram) - 4);
/* include rest of the definitions for the ARM Cortex-M, including STM32F1 family */
INCLUDE cortex-m-generic.ld