/* This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 *
 */
/** library for UART communication (code)
 *  @file uart.c
 *  @author King Kévin <kingkevin@cuvoodoo.info>
 *  @date 2016-2017
 *  @note peripherals used: USART @ref uart
 */

/* standard libraries */
#include <stdint.h> // standard integer types
#include <stdio.h> // standard I/O facilities
#include <stdlib.h> // general utilities

/* STM32 (including CM3) libraries */
#include <libopencm3/stm32/rcc.h> // real-time control clock library
#include <libopencm3/stm32/gpio.h> // general purpose input output library
#include <libopencm3/stm32/usart.h> // universal synchronous asynchronous receiver transmitter library
#include <libopencm3/cm3/nvic.h> // interrupt handler
#include <libopencmsis/core_cm3.h> // Cortex M3 utilities

#include "uart.h" // UART header and definitions
#include "global.h" // common methods

/** @defgroup uart USART peripheral used for UART communication
 *  @{
 */
#define UART_ID 1 /**< USART peripheral */
/** @} */

#define UART_BAUDRATE 115200 /**< serial baudrate, in bits per second (with 8N1 8 bits, no parity bit, 1 stop bit settings) */

/* output ring buffer, indexes, and available memory */
static volatile uint8_t tx_buffer[64] = {0}; /**< ring buffer for data to transmit */
static volatile uint8_t tx_i = 0; /**< current position of transmitted data */
static volatile uint8_t tx_used = 0; /**< how much data needs to be transmitted */

void uart_setup(void)
{
	/* enable UART I/O peripheral */
	rcc_periph_clock_enable(RCC_USART_PORT(UART_ID)); // enable clock for UART port peripheral
	rcc_periph_clock_enable(RCC_USART(UART_ID)); // enable clock for UART peripheral
	rcc_periph_clock_enable(RCC_AFIO); // enable pin alternate function (UART)
	gpio_set_mode(USART_TX_PORT(UART_ID), GPIO_MODE_OUTPUT_2_MHZ, GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, USART_TX_PIN(UART_ID)); // setup GPIO pin UART transmit
	gpio_set_mode(USART_RX_PORT(UART_ID), GPIO_MODE_INPUT, GPIO_CNF_INPUT_PULL_UPDOWN, USART_RX_PIN(UART_ID)); // setup GPIO pin UART receive
	gpio_set(USART_RX_PORT(UART_ID), USART_RX_PIN(UART_ID)); // pull up to avoid noise when not connected

	/* setup UART parameters */
	usart_set_baudrate(USART(UART_ID), UART_BAUDRATE);
	usart_set_databits(USART(UART_ID), 8);
	usart_set_stopbits(USART(UART_ID), USART_STOPBITS_1);
	usart_set_mode(USART(UART_ID), USART_MODE_TX_RX);
	usart_set_parity(USART(UART_ID), USART_PARITY_NONE);
	usart_set_flow_control(USART(UART_ID), USART_FLOWCONTROL_NONE);

	nvic_enable_irq(USART_IRQ(UART_ID)); // enable the UART interrupt
	usart_enable_rx_interrupt(USART(UART_ID)); // enable receive interrupt
	usart_enable(USART(UART_ID)); // enable UART

	/* reset buffer states */
	tx_i = 0;
	tx_used = 0;
}

void uart_putchar_blocking(char c)
{
	uart_flush(); // empty buffer first
	usart_send_blocking(USART(UART_ID), c); // send character
}

void uart_flush(void)
{
	while (tx_used) { // idle until buffer is empty
		__WFI(); // sleep until interrupt
	}
	usart_wait_send_ready(USART(UART_ID)); // wait until transmit register is empty (transmission might not be complete)
}

void uart_putchar_nonblocking(char c)
{
	while (tx_used>=LENGTH(tx_buffer)) { // idle until buffer has some space
		usart_enable_tx_interrupt(USART(UART_ID)); // enable transmit interrupt
		__WFI(); // sleep until something happened
	}
	usart_disable_tx_interrupt(USART(UART_ID)); // disable transmit interrupt to prevent index corruption
	tx_buffer[(tx_i+tx_used)%LENGTH(tx_buffer)] = c; // put character in buffer
	tx_used++; // update used buffer
	usart_enable_tx_interrupt(USART(UART_ID)); // enable transmit interrupt
}

/** UART interrupt service routine called when data has been transmitted or received */
void USART_ISR(UART_ID)(void)
{
	if (usart_get_flag(USART(UART_ID), USART_SR_TXE)) { // data has been transmitted
		if (!tx_used) { // no data in the buffer to transmit
			usart_disable_tx_interrupt(USART(UART_ID)); // disable transmit interrupt
		} else {
			usart_send(USART(UART_ID),tx_buffer[tx_i]); // put data in transmit register
			tx_i = (tx_i+1)%LENGTH(tx_buffer); // update location on buffer
			tx_used--; // update used size
		}
	}
	while (usart_get_flag(USART(UART_ID), USART_SR_RXNE)) { // data has been received (repeat while receiving)
		char c = usart_recv(USART(UART_ID)); // save character and free UART buffer
		user_input_store(c); // store data
	}
}