/** BusVoodoo 1-wire mode
 *  @file
 *  @author King Kévin <kingkevin@cuvoodoo.info>
 *  @date 2018-2020
 *  @copyright SPDX-License-Identifier: GPL-3.0-or-later
 *  @note peripherals used: timer @ref onewire_master_timer
 */
/* standard libraries */
#include <stdint.h> // standard integer types
#include <stdlib.h> // standard utilities
#include <string.h> // string utilities

/* STM32 (including CM3) libraries */
#include <libopencm3/stm32/rcc.h> // real-time control clock library
#include <libopencm3/stm32/gpio.h> // general purpose input output library
#include <libopencm3/stm32/timer.h> // timer library

/* own libraries */
#include "global.h" // board definitions
#include "print.h" // printing utilities
#include "menu.h" // menu definitions
#include "onewire_master.h" // 1-wire methods
#include "busvoodoo_global.h" // BusVoodoo definitions
#if BUSVOODOO_HARDWARE_VERSION != 2
#include "busvoodoo_oled.h" // OLED utilities
#endif
#include "busvoodoo_onewire.h" // own definitions

/** mode setup stage */
static enum busvoodoo_onewire_setting_t {
	BUSVOODOO_ONEWIRE_SETTING_NONE,
	BUSVOODOO_ONEWIRE_SETTING_PULLUP,
	BUSVOODOO_ONEWIRE_SETTING_POWER,
	BUSVOODOO_ONEWIRE_SETTING_DONE,
} busvoodoo_onewire_setting = BUSVOODOO_ONEWIRE_SETTING_NONE; /**< current mode setup stage */
/** if embedded pull-up resistors are used */
static bool busvoodoo_onewire_embedded_pullup = true;
/** time (in ms) between slot to provide power */
static bool busvoodoo_onewire_power = false;

/** setup 1-wire mode
 *  @param[out] prefix terminal prompt prefix
 *  @param[in] line terminal prompt line to configure mode
 *  @return if setup is complete
 */
static bool busvoodoo_onewire_setup(char** prefix, const char* line)
{
	bool complete = false; // is the setup complete
	if (NULL == line) { // first call
		busvoodoo_onewire_setting = BUSVOODOO_ONEWIRE_SETTING_NONE; // re-start configuration
	}
	switch (busvoodoo_onewire_setting) {
		case BUSVOODOO_ONEWIRE_SETTING_NONE:
			busvoodoo_onewire_setting = BUSVOODOO_ONEWIRE_SETTING_PULLUP; // go to first setting
			puts("1) use embedded pull-up resistor (2kO)\n");
			puts("2) use external pull-up resistor\n");
			snprintf(busvoodoo_global_string, LENGTH(busvoodoo_global_string), "pull-up mode (1,2) [%c]", busvoodoo_onewire_embedded_pullup ? '1' : '2'); // show pull-up setting
			*prefix = busvoodoo_global_string; // display next setting
			break;
		case BUSVOODOO_ONEWIRE_SETTING_PULLUP:
			if (NULL == line || 0 == strlen(line)) { // use default setting
				busvoodoo_onewire_setting = BUSVOODOO_ONEWIRE_SETTING_POWER; // go to next setting
			} else if (1 == strlen(line)) { // setting provided
				uint8_t pullup = atoi(line); // parse setting
				if (1 == pullup || 2 == pullup) { // check setting
					busvoodoo_onewire_embedded_pullup = (1 == pullup); // remember setting
					busvoodoo_onewire_setting = BUSVOODOO_ONEWIRE_SETTING_POWER; // go to next setting
				}
			}
			if (BUSVOODOO_ONEWIRE_SETTING_POWER==busvoodoo_onewire_setting) {
				puts("1) don't drive 1-wire data line (target uses external or parasitic power)\n");
				puts("2) power 1-wire data line at 3.3V when not communicating (not multi-master compatible)\n");
				snprintf(busvoodoo_global_string, LENGTH(busvoodoo_global_string), "power source (1,2) [%c]", busvoodoo_onewire_power ? '2' : '1'); // show power setting
				*prefix = busvoodoo_global_string; // display next setting
			}
			break;
		case BUSVOODOO_ONEWIRE_SETTING_POWER:
			if (NULL == line || 0 == strlen(line)) { // use default setting
				busvoodoo_onewire_setting = BUSVOODOO_ONEWIRE_SETTING_DONE; // go to next setting
			} else if (1 == strlen(line)) { // setting provided
				uint8_t power = atoi(line); // parse setting
				if (1 == power || 2 == power) { // check setting
					busvoodoo_onewire_power = (1 == power); // remember setting
					busvoodoo_onewire_setting = BUSVOODOO_ONEWIRE_SETTING_DONE; // go to next setting
				}
			}
			if (BUSVOODOO_ONEWIRE_SETTING_DONE == busvoodoo_onewire_setting) { // we have all settings, configure SPI
				onewire_master_setup(); // setup 1-wire
				if (busvoodoo_onewire_power) {
					// TODO add overdrive support in onewire_master library
					//gpio_set_mode(GPIO(ONEWIRE_MASTER_PORT), GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, GPIO(ONEWIRE_MASTER_PIN)); // provide power (external pull-up resistor is still require for communication)
				}
				if (busvoodoo_onewire_embedded_pullup) {
					if (!busvoodoo_onewire_power) {
						busvoodoo_embedded_pullup(true); // set embedded pull-ups
					}
					puts("use LV to set pull-up voltage\n");
				}
				busvoodoo_led_blue_off(); // disable blue LED because there is no activity
				busvoodoo_onewire_setting = BUSVOODOO_ONEWIRE_SETTING_NONE; // restart settings next time
				*prefix = "1-Wire"; // display mode
				const char* pinout_io[10] =  {"GND", "5V", "3V3", "LV", NULL, "1WR", NULL, NULL, NULL, NULL}; // 1-wire mode pinout
				for (uint8_t i = 0; i < LENGTH(pinout_io) && i < LENGTH(busvoodoo_global_pinout_io); i++) {
					busvoodoo_global_pinout_io[i] = pinout_io[i]; // set pin names
				}
#if BUSVOODOO_HARDWARE_VERSION != 2
				if (busvoodoo_full) {
					const char* pinout_rscan[5] = {"HV", NULL, NULL, NULL, NULL}; // HiZ mode RS/CAN pinout
					for (uint8_t i = 0; i < LENGTH(pinout_rscan) && i < LENGTH(busvoodoo_global_pinout_rscan); i++) {
						busvoodoo_global_pinout_rscan[i] = pinout_rscan[i]; // set pin names
					}
				}
				busvoodoo_oled_text_left(*prefix); // set mode title on OLED display
				busvoodoo_oled_text_pinout(pinout_io, true); // set pinout on display
				busvoodoo_oled_update(); // update display to show text and pinout
#endif
				complete = true; // configuration is complete
			}
			break;
		default: // unknown case
			busvoodoo_onewire_setting = BUSVOODOO_ONEWIRE_SETTING_NONE; // restart settings next time
			break;
	}
	return complete;
}

/** write to 1-wire
 *  @param[in] value value to write
 */
static void busvoodoo_onewire_write(uint8_t value)
{
	printf("write: 0x%02x", value);
	busvoodoo_led_blue_pulse(BUSVOODOO_LED_PULSE); // pulse blue LED to show we are writing
	if (!onewire_master_write_byte(value)) { // send data bytes
		puts(" (error)");
	}
	putc('\n');
}

/** read from 1-wire
 */
static void busvoodoo_onewire_read(void)
{
	uint8_t data; // buffer to read data
	busvoodoo_led_blue_pulse(BUSVOODOO_LED_PULSE); // pulse blue LED to show we are reading
	bool error = onewire_master_read_byte(&data); // read byte
	printf("read: 0x%02x%s\n", data, error ? "" : " (error)");
}

/** exit 1-wire mode
 */
static void busvoodoo_onewire_exit(void)
{
	onewire_master_release(); // release peripheral
	busvoodoo_embedded_pullup(false); // disable embedded pull-ups
}

/** perform 1-wire action
 *  @param[in] action action to perform
 *  @param[in] repetition how many times to perform the action
 *  @param[in] perform the action (true) or just check it (false)
 *  @return true if the action has been performed, false if it is malformed
 */
static bool busvoodoo_onewire_action(const char* action, uint32_t repetition, bool perform)
{
	uint32_t length = strlen(action); // remember length since it will be used a number of times
	if (NULL == action || 0 == length) { // there is nothing to do
		return true;
	}

	if (1 == length && 'r' == action[0]) { // read data
		if (!perform) {
			return true;
		}
		for (uint32_t i = 0; i < repetition; i++) {
			busvoodoo_onewire_read(); // read from 1-wire
		}
	} else if (1 == length && '[' == action[0]) { // start transaction with slave presence detection
		if (!perform) {
			return true;
		}
		if (busvoodoo_onewire_power) {
			// TODO add overdrive support in onewire_master library
			//gpio_set_mode(GPIO(ONEWIRE_MASTER_PORT), GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_OPENDRAIN, GPIO(ONEWIRE_MASTER_PIN)); // remove power from data line
		}
		// TODO add overdrive support in onewire_master library
		//if (!gpio_get(GPIO(ONEWIRE_MASTER_PORT), GPIO(ONEWIRE_MASTER_PIN))) {
		//	printf("WARNING: data line does not seem to be pulled up\n");
		//}
		puts("start transaction: ");
		bool presence = onewire_master_reset(); // send reset pulse and detect slave presence
		printf("slave presence %sdetected\n", presence ? "" : "not ");
	} else if (1 == length && ']' == action[0]) { // stop transaction
		if (!perform) {
			return true;
		}
		printf("end transaction%s\n", busvoodoo_onewire_power ? " and provide power on data line" : "");
		if (busvoodoo_onewire_power) {
			// TODO add overdrive support in onewire_master library
			//gpio_set_mode(GPIO(ONEWIRE_MASTER_PORT), GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, GPIO(ONEWIRE_MASTER_PIN)); // provide power (external pull-up resistor is still require for communication)
		}
	} else if (1 == length && 'u' == action[0]) { // sleep us
		if (!perform) {
			return true;
		}
		printf("wait for %u us\n", repetition);
		sleep_us(repetition); // sleep
	} else if (1 == length && 'm' == action[0]) { // sleep ms
		if (!perform) {
			return true;
		}
		printf("wait for %u ms\n", repetition);
		sleep_ms(repetition); // sleep
	} else if ('0' == action[0]) { // send digit
		if (1 == length) { // just send 0
			if (!perform) {
				return true;
			}
			for (uint32_t i = 0; i < repetition; i++) {
				busvoodoo_onewire_write(0); // write to SPI
			}
		} else if ('x' == action[1] || 'b' == action[1]) { // send hex/binary
			return busvoodoo_onewire_action(action + 1, repetition, perform); // just retry without leading 0
		} else if (action[1] >= '0' && action[1] <= '9') { // send decimal
			return busvoodoo_onewire_action(action+1, repetition, perform); // just retry without leading 0
		} else { // malformed action
			return false;
		}
	} else if ('x' == action[0] && length > 1) { // send hexadecimal value
		for (uint32_t i = 1; i < length; i++) { // check string
			if (!((action[i] >= '0' && action[i] <= '9') || (action[i] >= 'a' && action[i] <= 'f') || (action[i] >= 'A' && action[i] <= 'F'))) { // check for hexadecimal character
				return false; // not an hexadecimal string
			}
		}
		if (!perform) {
			return true;
		}
		uint32_t value = strtol(&action[1], NULL, 16); // get hex value
		for (uint32_t i = 0; i < repetition; i++) {
			busvoodoo_onewire_write(value); // write to SPI
		}
	} else if ('b' == action[0] && length > 1) { // send binary value
		for (uint32_t i = 1; i < length; i++) { // check string
			if (action[i] < '0' || action[i] > '1') { // check for binary character
				return false; // not a binary string
			}
		}
		if (!perform) {
			return true;
		}
		uint32_t value = strtol(&action[1], NULL, 2); // get binary value
		for (uint32_t i = 0; i < repetition; i++) {
			busvoodoo_onewire_write(value); // write to SPI
		}
	} else if (action[0] >= '1' && action[0] <= '9') { // send decimal value
		for (uint32_t i = 1; i < length; i++) { // check string
			if (action[i] < '0' || action[i] > '9') { // check for decimal character
				return false; // not a decimal string
			}
		}
		if (!perform) {
			return true;
		}
		uint32_t value = strtol(&action[0], NULL, 10); // get decimal value
		for (uint32_t i = 0; i < repetition; i++) {
			busvoodoo_onewire_write(value); // write to SPI
		}
	} else if (length >= 2 && ('"' == action[0] || '\'' == action[0]) && (action[length - 1] == action[0])) { // send ASCII character
		if (!perform) {
			return true;
		}
		for (uint32_t r = 0; r < repetition; r++) {
			for (uint32_t i = 1; i < length - 1; i++) { // go through string
				busvoodoo_onewire_write(action[i]); // write to SPI
			}
		}
	} else { // malformed action
		return false;
	}

	return true; // all went well
}

// command handlers

/** command to perform actions
 *  @param[in] argument actions to perform
 */
static void busvoodoo_onewire_command_actions(void* argument)
{
	if (NULL == argument || 0 == strlen(argument)) {
		puts("available actions (separated by space or ,):\n");
		puts("[\tstart transaction: send reset pulse and detect slave presence\n");
		printf("]\tend transaction%s\n", busvoodoo_onewire_power ? " and provide power on data line" : "");
		puts("0\twrite decimal byte\n");
		puts("0x0\twrite hexadecimal byte\n");
		puts("0b0\twrite binary byte\n");
		puts("\"a\"/'a'\twrite ASCII characters\n");
		puts("r\tread byte\n");
		puts("u/m\twait 1 us/ms\n");
		puts(":n\trepeat action n times\n");
		return;
	}
	// copy argument since it will be modified
	char* copy = calloc(strlen(argument)+1, sizeof(char));
	if (!copy) {
		while (true);
	}
	strncpy(copy, argument, strlen(argument)+1);
	// verify and perform actions
	if (!busvoodoo_global_actions(copy, false, &busvoodoo_onewire_action)) { // verify actions
		puts("malformed action(s)\n");
	} else { // action are OK
		busvoodoo_global_actions(argument, true, &busvoodoo_onewire_action); // perform action
	}
	free(copy); // release memory
}

/** command to perform ROM search
 *  @param[in] argument if only ROMs with alarms should be searched
 */
static void busvoodoo_onewire_rom_search(void* argument)
{
	bool alarm = false; // if only ROMs with alarms should be searched
	if (argument && 0 == strcmp(argument, "alarm")) {
		alarm = true;
	}
	if (busvoodoo_onewire_power) {
		// TODO add overdrive support in onewire_master library
		//gpio_set_mode(GPIO(ONEWIRE_MASTER_PORT), GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_OPENDRAIN, GPIO(ONEWIRE_MASTER_PIN)); // remove power from data line
	}
	// TODO add overdrive support in onewire_master library
	//if (!gpio_get(GPIO(ONEWIRE_MASTER_PORT), GPIO(ONEWIRE_MASTER_PIN))) {
	//	printf("WARNING: the data line needs to be pulled up\n");
	//	return;
	//}
	bool presence = onewire_master_reset(); // send reset pulse and detect slave presence
	printf("slave presence %sdetected\n", presence ? "" : "not ");
	if (presence) { // only search if a slave presence has been detected
		uint64_t code = 0; // code found
		uint64_t codes = 0; // number of codes found
		printf("searching ROM codes%s:\n", alarm ? " with alarm" : "");
		bool next; // if another ROM code is detected
		do { // search until all has been found
			busvoodoo_led_blue_pulse(BUSVOODOO_LED_PULSE); // pulse blue LED to show we are scanning
			next = onewire_master_rom_search(&code, alarm); // search for the code
			// TODO add overdrive support in onewire_master library
			//if (0==code && !gpio_get(GPIO(ONEWIRE_MASTER_PORT), GPIO(ONEWIRE_MASTER_PIN))) { // searching for ROM codes does not work when the line is not pulled up
			//	printf("not able to search for ROM codes when the data line is not pulled up\n");
			//	break;
			//}
			if (next) {
				presence = onewire_master_reset(); // send reset pulse and detect slave presence for the next slave
			}
			const char* device = "unknown";
			for (uint16_t i = 0; i < LENGTH(onewire_family_codes); i++) {
				if ((uint8_t)code == onewire_family_codes[i].code) {
					device = onewire_family_codes[i].device;
					break;
				}
			}
			uint8_t crc_data[8] = {code, code >> 8, code >> 16, code >> 24, code >> 32, code >> 40, code >> 48, code >> 56};
			printf("0x%016X: family code=0x%02x (possible device(s): %s), serial number=0x%012X, CRC=0x%02X (%s)\n", code, (uint8_t)code, device, (code >> 8) & 0xffffffffffffUL, (code >> 56) & 0xff, onewire_master_crc(crc_data, LENGTH(crc_data)) ? "ERROR" : "OK");
			codes++; // remember we found a code
		} while (presence && next && !user_input_available);
		printf("%U ROM code(s)%s found\n", codes, alarm ? " with alarm" : "");
		if (user_input_available) { // user interrupted flow
			user_input_get(); // discard user input
		}
	}
	if (busvoodoo_onewire_power) {
		// TODO add overdrive support in onewire_master library
		//gpio_set_mode(GPIO(ONEWIRE_MASTER_PORT), GPIO_MODE_OUTPUT_50_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, GPIO(ONEWIRE_MASTER_PIN)); // provide power on data line
	}
}

/** 1-wire menu commands */
static const struct menu_command_t busvoodoo_onewire_commands[] = {
	{
		.shortcut = 'a',
		.name = "action",
		.command_description = "perform protocol actions",
		.argument = MENU_ARGUMENT_STRING,
		.argument_description = "[actions]",
		.command_handler = &busvoodoo_onewire_command_actions,
	},
	{
		.shortcut = 's',
		.name = "search",
		.command_description = "perform ROM search",
		.argument = MENU_ARGUMENT_STRING,
		.argument_description = "[alarm]",
		.command_handler = &busvoodoo_onewire_rom_search,
	},
};

const struct busvoodoo_mode_t busvoodoo_onewire_mode = {
	.name = "1-wire",
	.description = "1-Wire",
	.full_only = false,
	.setup = &busvoodoo_onewire_setup,
	.commands = busvoodoo_onewire_commands,
	.commands_nb = LENGTH(busvoodoo_onewire_commands),
	.exit = &busvoodoo_onewire_exit,
};