kingkevin
/
stm32f1
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

application: move RTC initialisation before watchdog in case the locking needs more time

This commit is contained in:
King Kévin 2018-10-28 22:24:19 +01:00
parent 4a96073898
commit ca4d41e79f
1 changed files with 20 additions and 19 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

39
application.c
View File

@ -332,19 +332,6 @@ void main(void)
{
rcc_clock_setup_in_hse_8mhz_out_72mhz(); // use 8 MHz high speed external clock to generate 72 MHz internal clock
#if DEBUG
// enable functionalities for easier debug
DBGMCU_CR |= DBGMCU_CR_IWDG_STOP; // stop independent watchdog counter when code is halted
DBGMCU_CR |= DBGMCU_CR_WWDG_STOP; // stop window watchdog counter when code is halted
DBGMCU_CR |= DBGMCU_CR_STANDBY; // allow debug also in standby mode (keep digital part and clock powered)
DBGMCU_CR |= DBGMCU_CR_STOP; // allow debug also in stop mode (keep clock powered)
DBGMCU_CR |= DBGMCU_CR_SLEEP; // allow debug also in sleep mode (keep clock powered)
#else
// setup watchdog to reset in case we get stuck (i.e. when an error occurred)
iwdg_set_period_ms(WATCHDOG_PERIOD); // set independent watchdog period
iwdg_start(); // start independent watchdog
#endif
board_setup(); // setup board
uart_setup(); // setup USART (for printing)
usb_cdcacm_setup(); // setup USB CDC ACM (for printing and DFU)
@ -359,6 +346,26 @@ void main(void)
ir_nec_setup(true); // setup ID NEC code decoder
printf("\nwelcome to the CuVoodoo STM32F1 spark strober\n"); // print welcome message
// setup RTC
printf("setup internal RTC: ");
rtc_auto_awake(RCC_LSE, 32768-1); // ensure internal RTC is on, uses the 32.678 kHz LSE, and the prescale is set to our tick speed, else update backup registers accordingly (power off the micro-controller for the change to take effect)
rtc_interrupt_enable(RTC_SEC); // enable RTC interrupt on "seconds"
nvic_enable_irq(NVIC_RTC_IRQ); // allow the RTC to interrupt
printf("OK\n");
#if DEBUG
// enable functionalities for easier debug
DBGMCU_CR |= DBGMCU_CR_IWDG_STOP; // stop independent watchdog counter when code is halted
DBGMCU_CR |= DBGMCU_CR_WWDG_STOP; // stop window watchdog counter when code is halted
DBGMCU_CR |= DBGMCU_CR_STANDBY; // allow debug also in standby mode (keep digital part and clock powered)
DBGMCU_CR |= DBGMCU_CR_STOP; // allow debug also in stop mode (keep clock powered)
DBGMCU_CR |= DBGMCU_CR_SLEEP; // allow debug also in sleep mode (keep clock powered)
#else
// setup watchdog to reset in case we get stuck (i.e. when an error occurred)
iwdg_set_period_ms(WATCHDOG_PERIOD); // set independent watchdog period
iwdg_start(); // start independent watchdog
#endif
#if !(DEBUG)
// show watchdog information
printf("setup watchdog: %.2fs",WATCHDOG_PERIOD/1000.0);
@ -371,12 +378,6 @@ void main(void)
}
#endif
// setup RTC
printf("setup internal RTC: ");
rtc_auto_awake(RCC_LSE, 32768-1); // ensure internal RTC is on, uses the 32.678 kHz LSE, and the prescale is set to our tick speed, else update backup registers accordingly (power off the micro-controller for the change to take effect)
rtc_interrupt_enable(RTC_SEC); // enable RTC interrupt on "seconds"
nvic_enable_irq(NVIC_RTC_IRQ); // allow the RTC to interrupt
printf("OK\n");
// setup terminal
terminal_prefix = ""; // set default prefix