global: remove BV specific LEDs functions

This commit is contained in:
King Kévin 2018-05-03 12:54:55 +02:00
parent fa3293a1f9
commit accb5fd95b
3 changed files with 9 additions and 70 deletions

View File

@ -86,10 +86,9 @@ void main(void)
rcc_clock_setup_in_hse_8mhz_out_72mhz(); // start main clock
board_setup(); // setup board to control LED
#if defined(BUSVOODOO)
led_red(); // switch red LED to indicate bootloader started
#else
led_on(); // indicate bootloader started
#if defined(BUSVOODOO)
led_toggle(); // switch from blue to red LED
#endif
usb_dfu_setup(); // setup USB DFU for firmware upload
usb_dfu_start(); // run DFU mode

View File

@ -28,7 +28,6 @@
#include <libopencm3/cm3/systick.h> // SysTick library
#include <libopencm3/stm32/rcc.h> // real-time control clock library
#include <libopencm3/stm32/gpio.h> // general purpose input output library
#include <libopencm3/stm32/timer.h> // timer library
#include <libopencm3/stm32/exti.h> // external interrupt defines
#include "global.h" // common methods
@ -68,8 +67,7 @@ char* b2s(uint64_t binary, uint8_t rjust)
void led_on(void)
{
#if defined(BUSVOODOO)
timer_disable_counter(TIM1); // disable timer for PWM
gpio_set_mode(GPIO(LED_PORT), GPIO_MODE_OUTPUT_2_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, GPIO(LED_PIN)); // set LED pin to 'output push-pull'
gpio_set_mode(GPIO(LED_PORT), GPIO_MODE_OUTPUT_2_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, GPIO(LED_PIN)); // set LED pin push-pull
#endif
#if defined(LED_ON) && LED_ON
gpio_set(GPIO(LED_PORT), GPIO(LED_PIN));
@ -82,8 +80,7 @@ void led_on(void)
void led_off(void)
{
#if defined(BUSVOODOO)
timer_disable_counter(TIM1); // disable timer for PWM
gpio_set_mode(GPIO(LED_PORT), GPIO_MODE_INPUT, GPIO_CNF_INPUT_FLOAT, GPIO(LED_PIN)); // set LED pin to 'output push-pull'
gpio_set_mode(GPIO(LED_PORT), GPIO_MODE_INPUT, GPIO_CNF_INPUT_FLOAT, GPIO(LED_PIN)); // set LED pin to floating to disable LEDs
#else
#if defined(LED_ON) && LED_ON
gpio_clear(GPIO(LED_PORT), GPIO(LED_PIN));
@ -97,50 +94,11 @@ void led_off(void)
void led_toggle(void)
{
#if defined(BUSVOODOO)
timer_disable_counter(TIM1); // disable timer for PWM
gpio_set_mode(GPIO(LED_PORT), GPIO_MODE_OUTPUT_2_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, GPIO(LED_PIN)); // set LED pin to 'output push-pull'
gpio_set_mode(GPIO(LED_PORT), GPIO_MODE_OUTPUT_2_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, GPIO(LED_PIN)); // set LED pin to push-pull
#endif
gpio_toggle(GPIO(LED_PORT), GPIO(LED_PIN));
}
#if defined(BUSVOODOO)
void led_blink(double period, double duty)
{
if (period<0.0 || period>6.0 || duty<0.0 || duty>1.0) { // input argument out of bounds
return; // do nothing
}
timer_disable_counter(TIM1); // disable timer for PWM before resetting it
if (0.0==period) { // no blinking
gpio_set_mode(GPIO(LED_PORT), GPIO_MODE_OUTPUT_2_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, GPIO(LED_PIN)); // set LED pin as normal output
if (duty>0.5) { // LED should be on
gpio_set(GPIO(LED_PORT), GPIO(LED_PIN)); // switch LED on
} else { // LED should be off
gpio_clear(GPIO(LED_PORT), GPIO(LED_PIN)); // switch LED off
}
} else {
gpio_set_mode(GPIO(LED_PORT), GPIO_MODE_OUTPUT_2_MHZ, GPIO_CNF_OUTPUT_ALTFN_PUSHPULL, GPIO(LED_PIN)); // set LED pin to alternate function for PWM
timer_set_counter(TIM1, 0); // reset counter
timer_set_period(TIM1, 0xffff*(period/6.0)); // set period
timer_set_oc_value(TIM1, TIM_OC1, 0xffff*(period/6.0)*duty); // PWM duty cycle
timer_enable_counter(TIM1); // enable timer to start blinking
}
}
void led_blue(void)
{
timer_disable_counter(TIM1); // disable timer for PWM
gpio_set_mode(GPIO(LED_PORT), GPIO_MODE_OUTPUT_2_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, GPIO(LED_PIN)); // set LED pin to 'output push-pull'
gpio_set(GPIO(LED_PORT), GPIO(LED_PIN));
}
void led_red(void)
{
timer_disable_counter(TIM1); // disable timer for PWM
gpio_set_mode(GPIO(LED_PORT), GPIO_MODE_OUTPUT_2_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, GPIO(LED_PIN)); // set LED pin to 'output push-pull'
gpio_clear(GPIO(LED_PORT), GPIO(LED_PIN));
}
#endif
void sleep_us(uint32_t duration)
{
systick_counter_disable(); // disable SysTick to reconfigure it
@ -213,16 +171,9 @@ void board_setup(void)
// setup LED
rcc_periph_clock_enable(RCC_GPIO(LED_PORT)); // enable clock for LED
#if defined(BUSVOODOO)
// LED is connected to TIM1_CH1, allowing to used the PWM output so to display patterns
rcc_periph_clock_enable(RCC_TIM1); // enable clock for timer domain
timer_reset(TIM1); // reset timer configuration
timer_set_mode(TIM1, TIM_CR1_CKD_CK_INT, TIM_CR1_CMS_CENTER_1, TIM_CR1_DIR_UP); // configure timer to up counting mode (center aligned for more precise duty cycle control)
timer_set_oc_mode(TIM1, TIM_OC1, TIM_OCM_PWM1); // use PWM output compare mode
timer_enable_oc_output(TIM1, TIM_OC1); // enable output compare output
timer_enable_break_main_output(TIM1); // required to enable timer, even when no dead time is used
timer_set_prescaler(TIM1, 3296-1); // set prescaler to allow 3/3 seconds PWM output (72MHz/2^16/3296=0.33Hz)
gpio_set_mode(GPIO(LED_PORT), GPIO_MODE_INPUT, GPIO_CNF_INPUT_FLOAT, GPIO(LED_PIN)); // set LED pin to floating to disable LEDs
#else
gpio_set_mode(GPIO(LED_PORT), GPIO_MODE_OUTPUT_2_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, GPIO(LED_PIN)); // set LED pin to 'output push-pull'
gpio_set_mode(GPIO(LED_PORT), GPIO_MODE_OUTPUT_2_MHZ, GPIO_CNF_OUTPUT_PUSHPULL, GPIO(LED_PIN)); // set LED pin to output push-pull do drive LED
#endif
led_off(); // switch off LED per default

View File

@ -357,7 +357,7 @@
#if defined(SYSTEM_BOARD) || defined(CORE_BOARD)
/* on system and core board LED is on pin 11/PA1 */
#define LED_PORT A /**< GPIO port (port A) */
#define LED_PIN 1 /**< GPIO pin (pin PA1) */
#define LED_PIN 1 /**< GPIO pin (pin PA1) */
#define LED_ON 0 /**< LED is on when pin is low */
#elif defined(BLUE_PILL)
/* on minimum system LED is on pin 2/PC13 */
@ -373,7 +373,7 @@
/* on BusVoodoo LED is on pin PA8 */
#define LED_PORT A /**< GPIO port (port A) */
#define LED_PIN 8 /**< GPIO pin (pin PA8) */
#define LED_ON 1 /**< LED is on when pin is high */
#define LED_ON 1 /**< blue LED is on when pin is high, red LED is on when pin is low, LED is off when LED is floating */
#endif
/** @} */
@ -448,17 +448,6 @@ void led_on(void);
void led_off(void);
/** toggle board LED */
void led_toggle(void);
#if defined(BUSVOODOO)
/** set LED blinking pattern
* @param[in] period blue+red pattern duration in seconds (up to 3+3)
* @param[in] duty blue LED on duty cycle, before switching to red (0-1)
*/
void led_blink(double period, double duty);
/** switch on blue LED */
void led_blue(void);
/** switch on red LED */
void led_red(void);
#endif
/** go to sleep for some microseconds
* @param[in] duration sleep duration in us
*/