add DHT22 sensor library from thermo-regulator project

This commit is contained in:
King Kévin 2017-03-28 12:38:07 +02:00
parent b7049df659
commit 610d366754
2 changed files with 235 additions and 0 deletions

194
lib/sensor_dht22.c Normal file
View File

@ -0,0 +1,194 @@
/* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/** library to query measurements from Aosong DHT22 temperature and relative humidity sensor (code)
* @file sensor_dht22.c
* @author King Kévin <kingkevin@cuvoodoo.info>
* @date 2017
* @note peripherals used: GPIO and timer @ref sensor_dht22_timer
* @note the DHT22 protocol is very similar but nit completely compatible with the DHT22 protocol: only 1 ms initial host pull low is required (vs. 18 ms), the data is encoded as int16_t (vs. uint8_t), and the signal has more jitter
*/
/* standard libraries */
#include <stdint.h> // standard integer types
#include <math.h> // maths utilities
/* STM32 (including CM3) libraries */
#include <libopencmsis/core_cm3.h> // Cortex M3 utilities
#include <libopencm3/cm3/nvic.h> // interrupt handler
#include <libopencm3/stm32/rcc.h> // real-time control clock library
#include <libopencm3/stm32/gpio.h> // general purpose input output library
#include <libopencm3/stm32/timer.h> // timer utilities
/* own libraries */
#include "sensor_dht22.h" // PZEM electricity meter header and definitions
#include "global.h" // common methods
/** @defgroup sensor_dht22_timer timer peripheral used to measure signal timing for bit decoding
* @{
*/
#define SENSOR_DHT22_TIMER 4 /**< timer peripheral */
#define SENSOR_DHT22_CHANNEL 3 /**< channel used as input capture */
#define SENSOR_DHT22_JITTER 0.2 /**< signal timing jitter tolerated in timing */
/** @} */
volatile bool sensor_dht22_measurement_received = false;
/** communication states */
volatile enum sensor_dht22_state_t {
SENSOR_DHT22_OFF, // no request has started
SENSOR_DHT22_HOST_START, // host starts request (and waits >18ms)
SENSOR_DHT22_HOST_STARTED, // host started request and waits for slave answer
SENSOR_DHT22_SLAVE_START, // slave responds to request and puts signal low for 80 us and high for 80 us
SENSOR_DHT22_SLAVE_BIT, // slave is sending bit by putting signal low for 50 us and high (26-28 us = 0, 70 us = 1)
SENSOR_DHT22_MAX
} sensor_dht22_state = SENSOR_DHT22_OFF; /**< current communication state */
/** the bit number being sent (MSb first), up to 40 */
volatile uint8_t sensor_dht22_bit = 0;
/** the 40 bits (5 bytes) being sent by the device */
volatile uint8_t sensor_dht22_bits[5] = {0};
/** reset all states */
static void sensor_dht22_reset(void)
{
// reset states
sensor_dht22_state = SENSOR_DHT22_OFF;
sensor_dht22_bit = 0;
sensor_dht22_measurement_received = false;
gpio_set(TIM_CH_PORT(SENSOR_DHT22_TIMER,SENSOR_DHT22_CHANNEL), TIM_CH_PIN(SENSOR_DHT22_TIMER,SENSOR_DHT22_CHANNEL)); // idle is high (using pull-up resistor), pull-up before setting as output else the signal will be low for short
gpio_set_mode(TIM_CH_PORT(SENSOR_DHT22_TIMER,SENSOR_DHT22_CHANNEL), GPIO_MODE_OUTPUT_2_MHZ, GPIO_CNF_OUTPUT_OPENDRAIN, TIM_CH_PIN(SENSOR_DHT22_TIMER,SENSOR_DHT22_CHANNEL)); // setup GPIO pin as output (host starts communication before slave replies)
timer_ic_disable(TIM(SENSOR_DHT22_TIMER), TIM_IC(SENSOR_DHT22_CHANNEL)); // enable capture interrupt only when receiving data
timer_disable_counter(TIM(SENSOR_DHT22_TIMER)); // disable timer
}
void sensor_dht22_setup(void)
{
// setup timer to measure signal timing for bit decoding (use timer channel as input capture)
rcc_periph_clock_enable(RCC_TIM_CH(SENSOR_DHT22_TIMER,SENSOR_DHT22_CHANNEL)); // enable clock for GPIO peripheral
rcc_periph_clock_enable(RCC_TIM(SENSOR_DHT22_TIMER)); // enable clock for timer peripheral
timer_reset(TIM(SENSOR_DHT22_TIMER)); // reset timer state
timer_set_mode(TIM(SENSOR_DHT22_TIMER), TIM_CR1_CKD_CK_INT, TIM_CR1_CMS_EDGE, TIM_CR1_DIR_UP); // set timer mode, use undivided timer clock,edge alignment (simple count), and count up
timer_set_prescaler(TIM(SENSOR_DHT22_TIMER), 2-1); // set the prescaler so this 16 bits timer allows to wait for 18 ms for the start signal ( 1/(72E6/2/(2**16))=1.820ms )
timer_ic_set_input(TIM(SENSOR_DHT22_TIMER), TIM_IC(SENSOR_DHT22_CHANNEL), TIM_IC_IN_TI(SENSOR_DHT22_CHANNEL)); // configure ICx to use TIn
timer_ic_set_filter(TIM(SENSOR_DHT22_TIMER), TIM_IC(SENSOR_DHT22_CHANNEL), TIM_IC_OFF); // use no filter input (precise timing needed)
timer_ic_set_polarity(TIM(SENSOR_DHT22_TIMER), TIM_IC(SENSOR_DHT22_CHANNEL), TIM_IC_FALLING); // capture on rising edge
timer_ic_set_prescaler(TIM(SENSOR_DHT22_TIMER), TIM_IC(SENSOR_DHT22_CHANNEL), TIM_IC_PSC_OFF); // don't use any prescaler since we want to capture every pulse
timer_clear_flag(TIM(SENSOR_DHT22_TIMER), TIM_SR_UIF); // clear flag
timer_update_on_overflow(TIM(SENSOR_DHT22_TIMER)); // only use counter overflow as UEV source (use overflow as start time or timeout)
timer_enable_irq(TIM(SENSOR_DHT22_TIMER), TIM_DIER_UIE); // enable update interrupt for timer
timer_clear_flag(TIM(SENSOR_DHT22_TIMER), TIM_SR_CCIF(SENSOR_DHT22_CHANNEL)); // clear input compare flag
timer_enable_irq(TIM(SENSOR_DHT22_TIMER), TIM_DIER_CCIE(SENSOR_DHT22_CHANNEL)); // enable capture interrupt
nvic_enable_irq(NVIC_TIM_IRQ(SENSOR_DHT22_TIMER)); // catch interrupt in service routine
sensor_dht22_reset(); // reset state
}
bool sensor_dht22_measurement_request(void)
{
if (sensor_dht22_state!=SENSOR_DHT22_OFF) { // not the right state to start (wait up until timeout to reset state)
return false;
}
if (gpio_get(TIM_CH_PORT(SENSOR_DHT22_TIMER,SENSOR_DHT22_CHANNEL), TIM_CH_PIN(SENSOR_DHT22_TIMER,SENSOR_DHT22_CHANNEL))==0) { // signal should be high per default
return false;
}
if (TIM_CR1(TIM(SENSOR_DHT22_TIMER))&(TIM_CR1_CEN)) { // timer should be off
return false;
}
sensor_dht22_reset(); // reset states
// send start signal (pull low for > 1 ms)
gpio_clear(TIM_CH_PORT(SENSOR_DHT22_TIMER,SENSOR_DHT22_CHANNEL), TIM_CH_PIN(SENSOR_DHT22_TIMER,SENSOR_DHT22_CHANNEL)); // set signal to low
timer_set_counter(TIM(SENSOR_DHT22_TIMER), 0); // reset timer counter
timer_enable_counter(TIM(SENSOR_DHT22_TIMER)); // enable timer to wait for 1.8 ms until overflow
sensor_dht22_state = SENSOR_DHT22_HOST_START; // remember we started sending signal
return true;
}
struct sensor_dht22_measurement_t sensor_dht22_measurement_decode(void)
{
struct sensor_dht22_measurement_t measurement = { NAN, NAN }; // measurement to return
if (sensor_dht22_bit<40) { // not enough bits received
return measurement;
}
if ((uint8_t)(sensor_dht22_bits[0]+sensor_dht22_bits[1]+sensor_dht22_bits[2]+sensor_dht22_bits[3])!=sensor_dht22_bits[4]) { // error in checksum (not really parity bit, as mentioned in the datasheet)
return measurement;
}
// calculate measured values (stored as uint16_t deci-value)
measurement.humidity = (int16_t)((sensor_dht22_bits[0]<<8)+sensor_dht22_bits[1])/10.0;
measurement.temperature = (int16_t)((sensor_dht22_bits[2]<<8)+sensor_dht22_bits[3])/10.0;
return measurement;
}
/** interrupt service routine called for timer */
void TIM_ISR(SENSOR_DHT22_TIMER)(void)
{
if (timer_get_flag(TIM(SENSOR_DHT22_TIMER), TIM_SR_UIF)) { // overflow update event happened
timer_clear_flag(TIM(SENSOR_DHT22_TIMER), TIM_SR_UIF); // clear flag
if (sensor_dht22_state==SENSOR_DHT22_HOST_START) { // start signal sent
gpio_set_mode(TIM_CH_PORT(SENSOR_DHT22_TIMER,SENSOR_DHT22_CHANNEL), GPIO_MODE_INPUT, GPIO_CNF_INPUT_FLOAT, TIM_CH_PIN(SENSOR_DHT22_TIMER,SENSOR_DHT22_CHANNEL)); // switch pin to input (the external pull up with also set the signal high)
sensor_dht22_state = SENSOR_DHT22_HOST_STARTED; // switch to next state
timer_ic_enable(TIM(SENSOR_DHT22_TIMER), TIM_IC(SENSOR_DHT22_CHANNEL)); // enable capture interrupt only when receiving data
} else { // timeout occurred
sensor_dht22_reset(); // reset states
}
} else if (timer_get_flag(TIM(SENSOR_DHT22_TIMER), TIM_SR_CCIF(SENSOR_DHT22_CHANNEL))) { // edge detected on input capture
uint16_t time = TIM_CCR(SENSOR_DHT22_TIMER,SENSOR_DHT22_CHANNEL); // save captured bit timing (this clear also the flag)
timer_set_counter(TIM(SENSOR_DHT22_TIMER), 0); // reset timer counter
time = (time*1E6)/(rcc_ahb_frequency/(TIM_PSC(TIM(SENSOR_DHT22_TIMER))+1)); // calculate time in us
switch (sensor_dht22_state) {
case (SENSOR_DHT22_HOST_STARTED): // the host query data and the slave is responding
sensor_dht22_state = SENSOR_DHT22_SLAVE_START; // set new state
break;
case (SENSOR_DHT22_SLAVE_START): // the slave sent the start signal
if (time >= ((80+80)*(1-SENSOR_DHT22_JITTER)) && time <= ((80+80)*(1+SENSOR_DHT22_JITTER))) { // response time should be 80 us low and 80 us high
sensor_dht22_state = SENSOR_DHT22_SLAVE_BIT; // set new state
} else {
goto error;
}
break;
case (SENSOR_DHT22_SLAVE_BIT): // the slave sent a bit
if (sensor_dht22_bit>=40) { // no bits should be received after 40 bits
goto error;
}
if (time >= ((50+26)*(1-SENSOR_DHT22_JITTER)) && time <= ((50+28)*(1+SENSOR_DHT22_JITTER))) { // bit 0 time should be 50 us low and 26-28 us high
sensor_dht22_bits[sensor_dht22_bit/8] &= ~(1<<(7-(sensor_dht22_bit%8))); // clear bit
} else if (time >= ((50+70)*(1-SENSOR_DHT22_JITTER)) && time <= ((50+70)*(1+SENSOR_DHT22_JITTER))) { // bit 1 time should be 50 us low and 70 us high
sensor_dht22_bits[sensor_dht22_bit/8] |= (1<<(7-(sensor_dht22_bit%8))); // set bit
} else {
goto error;
}
sensor_dht22_bit++;
if (sensor_dht22_bit>=40) { // all bits received
sensor_dht22_reset(); // reset states
sensor_dht22_bit = 40; // signal decoder all bits have been received
sensor_dht22_measurement_received = true; // signal user all bits have been received
}
break;
default: // unexpected state
error:
sensor_dht22_reset(); // reset states
}
} else { // no other interrupt should occur
while (true); // unhandled exception: wait for the watchdog to bite
}
}

41
lib/sensor_dht22.h Normal file
View File

@ -0,0 +1,41 @@
/* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/** library to query measurements from Aosong DHT22 (aka. AM2302) temperature and relative humidity sensor (API)
* @file sensor_dht22.h
* @author King Kévin <kingkevin@cuvoodoo.info>
* @date 2017
* @note peripherals used: timer channel @ref sensor_dht22_timer (add external pull-up resistor)
*/
#pragma once
/** a measurement response has been received */
extern volatile bool sensor_dht22_measurement_received;
/** measurement returned by sensor */
struct sensor_dht22_measurement_t {
float humidity; /**< relative humidity in %RH (0-100) */
float temperature; /**< temperature in °C (-40-80) */
};
/** setup peripherals to communicate with sensor */
void sensor_dht22_setup(void);
/** request measurement from sensor
* @return request started successfully
*/
bool sensor_dht22_measurement_request(void);
/** decode received measurement
* @return decoded measurement (0xff,0xff if invalid)
*/
struct sensor_dht22_measurement_t sensor_dht22_measurement_decode(void);