take OLED SSD1306 library from busvoodoo branch

This commit is contained in:
King Kévin 2018-04-03 17:00:04 +02:00
parent 593b0e0e25
commit 4470ba7de2
2 changed files with 176 additions and 0 deletions

140
lib/oled_ssd1306.c Normal file
View File

@ -0,0 +1,140 @@
/* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/** SSD1306 OLED library (code)
* @file oled_ssd1306.c
* @author King Kévin <kingkevin@cuvoodoo.info>
* @date 2018
* @note peripherals used: I2C @ref oled_ssd1306_i2c
*/
/* standard libraries */
#include <stdint.h> // standard integer types
#include <stdbool.h> // boolean type
#include <stdlib.h> // general utilities
/* STM32 (including CM3) libraries */
#include <libopencm3/stm32/i2c.h> // I2C library
/* own libraries */
#include "global.h" // global utilities
#include "oled_ssd1306.h" // OLED definitions
#include "i2c_master.h" // I2C header and definitions
/** SSD1306 OLED display I2C slave address */
#define OLED_SSD1306_SLAVE 0x3c
/** @defgroup oled_ssd1306_i2c I2C peripheral to communicate with the SSD1306 OLED
* @{
*/
#define OLED_SSD1306_I2C I2C1 /**< I2C peripheral */
/** @} */
bool oled_ssd1306_setup(void)
{
if (!i2c_master_check_signals(OLED_SSD1306_I2C)) { // check if there are pull-ups to operator I2C
return false;
}
i2c_master_setup(OLED_SSD1306_I2C, 400); // setup I2C bus ( SSD1306 supports an I2C cleck up to 400 kHz)
const uint8_t oled_init[] = {
0x00, // control byte: continuous (multiple byes), command
0xae, // Set Display ON/OFF: OFF
// hardware configuration
0xa8, 0x3f, // Set Multiplex Ratio: 64
0xd3, 0x00, // Set Display Offset: 0
0xa1, // Set Segment Re-map: column address 0 is mapped to SEG127
0xc8, // Set COM Output Scan Direction: normal mode (RESET) Scan from COM[N-1] to COM[0]
0xda, 0x12, // Set COM Pins Hardware Configuration: Alternative COM pin configuration, Disable COM Left/Right remap
0x40, // Set Display Start Line: start line register from 0
// fundamental commands
0x81, 0xff, // Set Contrast Control: 256
0xa6, // Set Normal/Inverse Display: Normal display (RESET)
// Timing & Driving Scheme Setting
0xd5, 0xf0, // Set Display Clock Divide Ratio/Oscillator Frequency: Divide ratio=129, F_OSC=1
0xd9, 0x22, // Set Pre-charge Period: Phase 1=2 DCLK, Phase 2=2DCLK
0xdb, 0x20, // Set V_COMH Deselect Level: ~0.77xV_CC
// Charge Pump
0x8d, 0x14, // Charge Pump Setting: Enable Charge Pump
// Addressing Setting
0x20, 0x00 // Set Memory Addressing Mode: Horizontal Addressing Mode
}; // command to initialize the display
return I2C_MASTER_RC_NONE==i2c_master_slave_write(OLED_SSD1306_I2C, OLED_SSD1306_SLAVE, false, oled_init, LENGTH(oled_init)); // send command to initialize display
}
void oled_ssd1306_on(void)
{
const uint8_t oled_display_on[] = {
0x80, // control byte: no continuation, command
0xaf, // Set Display ON/OFF: ON
}; // command to switch on display
i2c_master_slave_write(OLED_SSD1306_I2C, OLED_SSD1306_SLAVE, false, oled_display_on, LENGTH(oled_display_on)); // sent command to switch on display
}
void oled_ssd1306_off(void)
{
const uint8_t oled_display_off[] = {
0x80, // control byte: no continuation, command
0xae, // Set Display ON/OFF: OFF
}; // command to switch off display
i2c_master_slave_write(OLED_SSD1306_I2C, OLED_SSD1306_SLAVE, false, oled_display_off, LENGTH(oled_display_off)); // sent command to switch onff display
}
void oled_ssd1306_test(void)
{
const uint8_t oled_entire_display_on[] = {
0x80, // control byte: no continuation, command
0xa5 // Entire Display ON: Entire display ON Output ignores RAM content
}; // command to set entire display on
i2c_master_slave_write(OLED_SSD1306_I2C, OLED_SSD1306_SLAVE, false, oled_entire_display_on, LENGTH(oled_entire_display_on)); // send command to switch entire display on
oled_ssd1306_on(); // set display on
sleep_ms(200); // let is on for a bit (enough for the user to see it is completely on
oled_ssd1306_off(); // set display off
const uint8_t oled_entire_display_ram[] = {
0x80, // control byte: no continuation, command
0xa4 // Entire Display ON: Resume to RAM content display
}; // command to display RAM
i2c_master_slave_write(OLED_SSD1306_I2C, OLED_SSD1306_SLAVE, false, oled_entire_display_ram, LENGTH(oled_entire_display_ram)); // send command to display RAM
}
void oled_ssd1306_display(const uint8_t* display_data, uint16_t display_length)
{
// verify input
if (0==display_length || NULL==display_data) {
return;
}
const uint8_t oled_start_page[] = {
0x00, // control byte: continuous (multiple byes), command
0xb0, // Set Page Start Address for Page Addressing Mode: PAGE0
0x00, // Set Lower Column Start Address for Page Addressing Mode: 0
0x10 // Set Higher Column Start Address for Page Addressing Mode: 0
}; // command to set addressing mode
i2c_master_slave_write(OLED_SSD1306_I2C, OLED_SSD1306_SLAVE, false, oled_start_page, LENGTH(oled_start_page)); // send command to set addressing mode
if (I2C_MASTER_RC_NONE!=i2c_master_start(OLED_SSD1306_I2C)) { // send start condition
return;
}
if (I2C_MASTER_RC_NONE!=i2c_master_select_slave(OLED_SSD1306_I2C, OLED_SSD1306_SLAVE, false, true)) { // select OLED display
return;
}
const uint8_t oled_data[] = {
0x40, // control byte: continuous (multiple byes), data
};
if (I2C_MASTER_RC_NONE!=i2c_master_write(OLED_SSD1306_I2C, oled_data, LENGTH(oled_data))) { // send data header
return;
}
if (I2C_MASTER_RC_NONE!=i2c_master_write(OLED_SSD1306_I2C, display_data, display_length)) { // send template picture to display
return;
}
i2c_master_stop(OLED_SSD1306_I2C); // send stop condition
}

36
lib/oled_ssd1306.h Normal file
View File

@ -0,0 +1,36 @@
/* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/** SSD1306 OLED library (API)
* @file oled_ssd1306.h
* @author King Kévin <kingkevin@cuvoodoo.info>
* @date 2018
* @note peripherals used: I2C @ref oled_ssd1306_i2c
*/
/** setup OLED display
* @return if the display setup is successful, else the display is probably not on the I2C bus
*/
bool oled_ssd1306_setup(void);
/** switch OLED display on */
void oled_ssd1306_on(void);
/** switch OLED display off */
void oled_ssd1306_off(void);
/** test OLED display: switch entire screen on for a brief time */
void oled_ssd1306_test(void);
/** send data to display to OLED display
* @param[in] display_data data to display (first byte is left column, MSb is top pixel, warps pages)
* @param[in] display_length length of data to display
*/
void oled_ssd1306_display(const uint8_t* display_data, uint16_t display_length);